Topology **Sa next slide andun pano iconfig ip ng PC Remember to put valid IP addresses for ur end devices (PCs) example for this 1.98 pwede rin 1.100 basta pasok sa range niya 1.66 Lagay valid IP, dito ginamit ay 1.10 1st/default gateway Host requirement Network address End device IP Last Example: PC - B IP configuration Wag kalimutan ‘yung subnet!!! Kasi ang /26 = 255.255.255.192 Default gateway ay yung 1st valid ip Note: ‘Yung IP address na sinet mo jan, yun yung ipiping mo sa command prompt pag iveverify mo yung connection ng mga end devices Complete routing table R1 routing table R1 route #1 Destination network (IP AND SUBNET) Next hop IP address R1 route #2 and #3 Destination network (IP AND SUBNET) Exit interface R1 route #4 Destination network (IP AND SUBNET) Next hop IP address R1 configuration R2 routing table R2 route #1 Destination network (IP AND SUBNET) Next hop IP address R2 route #2 Destination network (IP AND SUBNET) Exit interface R2 route #3 Destination network (IP AND SUBNET) Next hop IP address R2 configuration R3 routing table R3 route #1 Destination network (IP AND SUBNET) Next hop IP address R3 route #1 Destination network (IP AND SUBNET) Next hop IP address R3 route #3 and #4 1.122 Destination network (IP AND SUBNET) Next hop IP address R3 configuration
