Accessory INSTALLATION INSTRUCTIONS Publications No. VERSION 1 AMBIENT LIGHT P/N 08E10-THR-100 PARTS LIST 2 Application 2019 ODYSSEY Issue Date MAR 2018 INSTALLATION Ambient lights Customer Information: The information in this installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by “do-it-yourselfers.” 1. TOOLS AND SUPPLIES REQUIRED Disconnect the negative cable from the battery: • Phillips screwdriver Wrap a shop towel around the hood latch. 10 mm Open end wrench HOOD LATCH (Wrap with a shop towel.) Shop towel The following tools are available through the Honda Tool and Equipment Program. On the iN, click on Service > Service Bay > Tool and Equipment Program, then enter the number under “Search.” Or, call 888-424-6857. • Trim Tool Set (T/N SOJATP2014) • Plastic Trim Tool (T/N SILTRIMTL10) Illustration of the Ambient Lights in the Vehicle AMBIENT LIGHT AMBIENT LIGHT © 2018 American Honda Motor Co., Inc. – All Rights Reserved. AII08606-01 (1803) 08E10-THR-1000-90 1 of 6 • Remove the front bulkhead cover. FRONT BULKHEAD COVER 2. Pull away the door opening seal, and remove the driver’s dashboard side lid. 8 CLIPS DRIVER’S DASHBOARD SIDE LID 4 RETAINING TABS • Remove the intake air tube. • Disconnect the negative cable from the battery. 2 CLIPS 2 of 6 DOOR OPENING SEAL (Pull away.) 5 CLIPS INTAKE AIR TUBE AII08606-01 (1803) © 2018 American Honda Motor Co., Inc. – All Rights Reserved. 3. Remove the driver’s dashboard lower cover, and unplug the vehicle connectors. VEHICLE CONNECTOR ASPIRATOR HOSE 4. Remove the tape to free the vehicle 2-pin connector. TAPE (Remove.) VEHICLE HARNESS OPPOSITE SIDE VIEW DRIVER’S DASHBOARD LOWER COVER (inside) 2 SELF-TAPPING SCREWS VEHICLE CONNECTORS OPPOSITE SIDE VIEW FRONT VEHICLE 2-PIN CONNECTOR DRIVER’S DASHBOARD LOWER COVER 12 CLIPS 2 CLIPS DRIVER’S DASHBOARD LOWER COVER OPENING © 2018 American Honda Motor Co., Inc. – All Rights Reserved. AII08606-01 (1803) 3 of 6 5. Install the ambient light on the instrument panel as shown. 6. Plug the vehicle 2-pin connector into the ambient light. OPPOSITE SIDE VIEW AMBIENT LIGHT OPPOSITE SIDE VIEW Turn FRONT FRONT INSTRUMENT PANEL FRONT VEHICLE 2-PIN CONNECTOR HOLE DRIVER’S DASHBOARD LOWER COVER OPENING 4 of 6 AMBIENT LIGHT DRIVER’S DASHBOARD LOWER COVER OPENING AII08606-01 (1803) © 2018 American Honda Motor Co., Inc. – All Rights Reserved. 7. Remove the passenger’s dashboard under cover. 4 RETAINING TABS 8. CLIP Install the ambient light on the passenger’s dashboard under cover as shown. AMBIENT LIGHT Turn HOLE PASSENGER’S DASHBOARD UNDER COVER 4 CLIPS PASSENGER’S DASHBOARD UNDER COVER PASSENGER’S DASHBOARD UNDER COVER © 2018 American Honda Motor Co., Inc. – All Rights Reserved. AII08606-01 (1803) AMBIENT LIGHT 5 of 6 9. Remove the tape to free the vehicle 2-pin connector. TAPE (Remove.) 11. Check that all wire harnesses are routed properly and all connectors are plugged in. 12. Install all removed parts except for the front bulkhead cover and the intake air tube. VEHICLE HARNESS 13. Connect the negative cable to the battery. 14. Install the front bulkhead cover and the intake air tube. 15. Press and hold the audio unit power button for 2 seconds to restore the audio and navi (if equipped) system functions. 16. Set the clock on vehicles without navigation. 17. If necessary, restore the systems back to normal operation as described in the service information. HOW TO OPERATE • With the light switch set to the ambient lights are on. PASSENGER’S DASHBOARD UNDER COVER OPENING or position, the • When the headlight switch is in the AUTO position, the ambient lights are on with the parking lights or headlights. VEHICLE 2-PIN CONNECTOR • If the ambient lights do not come on, check the fuse and all of the connectors. 10. Plug the vehicle 2-pin connector into the ambient light, then install the passenger’s dashboard under cover. LIGHT SWITCH AMBIENT LIGHT PASSENGER’S DASHBOARD UNDER COVER 6 of 6 VEHICLE 2-PIN CONNECTOR AII08606-01 (1803) © 2018 American Honda Motor Co., Inc. – All Rights Reserved.