CEE-plus™ & ZED-plus™ Purlin & Girt High Strength | Light-weight | Recyclable | Durable | Corrosion Resistance 1 Purlin & Girt LYSAGHT CEE-plus™ and ZED-plus™ are products 1.0 mm BMT: G550, Z275 specially designed and developed for purlin and girt 1.9 mm BMT: G350, Z275 application, which not only provides economy to the 2.4 mm BMT: G350, Z275 building construction, but also helps in keeping the site clean and environment friendly. LYSAGHT CEE-plus™ and ZED-plus™ sections are accurately roll-formed from high strength zinc-coated steel, pre-punched to the required dimensions to provide an efficient, lightweight, economical purlin and girts. These products are suitable for roof, wall support and portal framing up to a certain span. The system, which includes bridging and a comprehensive range of accessories, is supplied as ready for erection. Note: LYSAGHT CEE™ and ZED™ section are also available with Zinc coating of 120 g/m2. Please contact nearest Tata BlueScope Steel office for further information. Bolt Specification LYSAGHT® purlin bolts and nuts have integral washers. Tighten all bolts to 55 N-m torque. Nominal section size (mm) M12 LYSAGHT® purlin bolt 100, 150, 200, 250 strength (grade 8.8) Benefits Greater Spanning Capability: Cold formed galvanized purlins have a minimum yield strength of approximately 60% greater than that of hot rolled steel that is typically used for purlins. This high standard(grade 4.6) or high M16 LYSAGHT® purlin bolt 300* standard(grade 4.6) or high strength (grade 8.8) *Non standard items strength – to – weight ratio in most applications allows Size and Dimensions extra spanning capability for the most cost effective The standard sizes for purlins are produced in nominal structures. depth of 100,150, 200, 250 and 300 mm. The sections Easier to Handle: The high strength to low weight ratio makes the product easier to handle both during transportation and erection. are generally designed by code number signifying the nominal depth and material thickness and letter prefix to indicate the profile. Purlin are generally produced in thickness of 1.0, 1.2, 1.5, 1.9 and 2.4 mm. Lower Maintenance Costs: Superior corrosion resistance of the zinc coating lowers maintenance Z 200 20 costs during its life cycle. Quick and Easy Installation: The pre-punched sections of the high strength galvanized cold rolled Z section Nominal Depth (mm) sections reduces fixing time by using self-drilling, self- Base Metal Thickness (1/10mm) tapping screws and standard bolts. Material Specifications Shapes and Sections LYSAGHT CEE-plus™ and ZED-plus™ sections are Two basic cold formed shapes - CEE-plus™ and ZED- roll-formed from galvanised steel complying with plus™ are used for purlins and girts. While each has AS1397-2001. In the grades shown, the number individual characteristics, both perform effectively prefixed with G indicates minimum yield stress in and in many instances the choice of one section over MPa; and the number prefixed with Z indicates the other can come down to the personal preference minimum coating mass in g/m2. of the designer. 2 Dimensions and Sectional Properties of LYSAGHT® Purlins 100 / 75 L ip W(bt) W(bt) 36.5 W(bt) ZED-plus™ PURLIN (45 DEG LIP) 40 Lip Depth thk Depth thk Depth thk Lip W(tp) Lip W(tp) 61 Lip W(tp) 102 50/40 ZED-plus™ PURLIN (90 DEG LIP) CEE-plus™ PURLIN (90 DEG LIP) SMARTRUSS C100 & C75 TOPSPAN TS 60 & TS 40 Table 1: LYSAGHT ZED-plus™ (45 DEG LIP) PURLIN PROPERTIES Name Depth W(Tp) W(Bt) Thk mm mm mm mm Lip Rad Lip angle Area Wt (Kg/m) Yb mm mm deg cm2 (275GSM) mm Ix cm4 SxTop cm3 SxBot cm3 Rx mm Iy cm4 Sy cm3 Ry mm 150Z10 150Z12 150Z15 150Z19 150Z24 152 152 152 152 152 60 60 60 60 60 60 60 60 60 60 1 1.2 1.5 1.9 2.4 16 17 18 19 20 5 5 5 5 5 45 45 45 45 45 2.96 3.57 4.47 5.68 7.18 2.36 2.86 3.56 4.49 5.64 76 76 76 76 76 108.73 130.76 163.34 206.19 258.82 14.31 17.21 21.49 27.13 34.06 14.31 17.21 21.49 27.13 34.06 60.61 60.54 60.42 60.24 60.02 27.06 33.42 42.84 55.43 71.23 3.82 4.68 5.95 7.65 9.76 30.23 30.61 30.94 31.23 31.49 200Z15 200Z19 200Z20 200Z24 200Z30 200 200 200 200 200 70 70 70 70 70 70 70 70 70 70 1.5 19.8 1.9 23 2.0* 23 2.4 23.8 3 24.8 5 5 5 5 5 45 45 45 45 45 5.55 7.13 7.49 9 11.25 4.46 5.7 6 7.17 9.1 100 100 100 100 100 343.29 439.8 461.98 552.39 685.89 34.33 43.98 46.2 55.24 68.59 34.33 43.98 46.2 55.24 68.59 78.66 78.57 78.52 78.35 78.08 66.12 91.19 95.7 116.19 146.91 7.94 10.69 11.22 13.57 17.08 34.52 35.78 35.74 35.93 36.14 240Z15 240Z19 240Z24 240Z30 240 240 240 240 70 70 70 70 70 70 70 70 1.5 1.9 2.4 3.0 27.3 28 28.8 29.8 5 5 5 5 45 45 45 45 6.37 8.08 10.2 12.75 5.13 6.46 8.13 10.28 120 549.62 45.8 120 693.76 57.81 120 872.13 72.68 120 1084.05 90.34 45.8 57.81 72.68 90.34 92.86 92.69 92.47 92.21 82.53 105.38 134.17 169.5 9.32 11.86 15.05 18.92 35.98 36.13 36.27 36.46 250Z30 254 70 70 3* 23 5 45 12.76 10.28 127 1193.39 93.97 93.97 96.7 139.24 16.43 33.03 300Z19 300Z24 300Z30 300 300 300 95 95 95 95 95 95 1.9 2.4 3* 23 23.8 24.8 5 5 5 45 45 45 9.94 12.56 15.7 7.98 10.04 12.52 150 1341.32 89.42 89.42 116.18 185.03 17.11 43.15 150 1689.92 112.66 112.66 115.99 236.47 21.77 43.39 150 2103.74 140.25 140.25 115.75 298.31 27.37 43.59 Please contact Tata BlueScope Steel office before adopting for design. Non standard thickness & sizes are also available on special request. Name 150Z10 150Z12 150Z15 150Z19 150Z24 200Z15 200Z19 200Z20 200Z24 250Z15 250Z19 250Z24 300Z19 300Z24 300Z30 Table 2: LYSAGHT ZED-plus™ (90 DEG LIP) PURLIN PROPERTIES Depth W(Tp) W(Bt) Thk Lip Rad Lip angle Area Wt (Kg/m) Yb Ix SxTop SxBot Rx mm mm mm mm mm mm deg cm2 (275GSM) mm cm4 cm3 cm3 mm 152 152 152 152 152 203 203 203 203 254 254 254 300 300 300 65 65 65 65 65 79 79 79 79 79 79 79 100 100 100 61 61 61 61 61 74 74 74 74 74 74 74 93 93 93 1 1.2 1.5 1.9 2.4 1.5 1.9 2* 2.4 1.5 1.9 2.4 1.9 2.4 3* 13 16 17 18 20 16 20 20 22 18 19 21 27 28 30 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 2.91 3.55 4.44 5.63 7.15 5.58 7.19 7.55 9.11 6.41 8.12 10.29 10.05 12.69 15.89 2.36 2.86 3.56 4.49 5.64 4.46 5.7 6 7.17 5.13 6.46 8.13 7.98 10.04 12.52 77.04 77.02 77.02 77.01 77.01 102.85 102.83 102.82 102.82 128.48 128.48 128.47 151.97 151.97 151.96 105.86 128.88 160.54 201.92 253.9 355.03 455.5 478.21 574.04 607.53 766.79 968.23 1357.77 1706.16 2126.24 14.12 17.19 21.41 26.93 33.86 35.45 45.47 47.74 57.3 48.4 61.09 77.13 91.72 115.26 143.63 13.74 16.73 20.84 26.22 33.97 34.52 44.3 46.51 55.83 47.29 59.68 75.37 89.34 112.27 139.92 60.36 60.28 60.12 59.9 59.61 79.75 79.62 79.56 79.36 97.38 97.2 97 116.21 115.95 115.66 Iy cm4 Sy cm3 Ry mm 23.66 30.77 38.87 49.42 64.02 63.76 87.48 91.6 112.92 67.14 85.38 110.3 187.31 236.14 298.65 3.73 4.86 6.15 7.84 10.2 8.27 11.38 11.93 14.74 8.7 11.09 14.38 19.21 24.29 30.81 28.54 29.45 29.58 29.64 29.93 33.8 34.89 34.82 35.2 32.37 32.43 32.74 43.16 43.14 43.35 Please contact Tata BlueScope Steel office before adopting for design. Non standard thickness & sizes are also available on special request. 3 Purlin & Girt Table 3: LYSAGHT CEE-plus™ PURLIN PROPERTIES Name 100C10 100C12 100C15 100C19 100C24 150C10 150C12 150C15 150C19 150C24 200C15 200C19 200C24 200C30 240C15 240C19 240C24 240C30 250C15 250C19 250C24 250C30 300C19 300C24 300C30 Depth W(Tp) W(Bt) Thk mm mm mm mm 102 51 51 1 102 51 51 1.2 102 51 51 1.5 102 51 51 1.9 102 51 51 2.4 152 64 64 1 152 64 64 1.2 152 64 64 1.5 152 64 64 1.9 152 64 64 2.4 200 76 76 1.5 200 76 76 1.9 200 76 76 2.4 200 76 76 3 240 76 76 1.5 240 76 76 1.9 240 76 76 2.4 240 76 76 3 252 76 76 1.5 252 76 76 1.9 252 76 76 2.4 252 76 76 3 300 96 96 1.9 300 96 96 2.4 300 96 96 3 Lip Rad Lip angle mm mm deg 12.5 5 90 12.5 5 90 13.5 5 90 14.5 5 90 16 5 90 14 5 90 14.5 5 90 15.5 5 90 16.5 5 90 18.5 5 90 16.9 5 90 20.4 5 90 21.6 5 90 23.1 5 90 24.4 5 90 25.4 5 90 26.6 5 90 28.1 5 90 16.5 5 90 18.1 5 90 20.1 5 90 22.5 5 90 24.1 5 90 26.1 5 90 28.5 5 90 Area Wt (Kg/m) cm2 (275GSM) 2.16 1.75 2.58 2.09 3.22 2.59 4.09 3.27 5.18 4.11 2.95 2.36 3.53 2.86 4.43 3.56 5.61 4.49 7.12 5.64 5.55 4.46 7.12 5.7 9.00 7.17 11.25 9.1 6.37 5.13 8.07 6.46 10.2 8.13 12.75 10.28 6.32 5.13 8.02 6.46 10.18 8.13 12.78 10.28 9.92 7.98 12.58 10.04 15.78 12.52 Yb mm 51 51 51 51 51 76 76 76 76 76 100 100 100 100 120 120 120 120 126 126 126 126 150 150 150 Ix cm4 36.38 43.25 53.74 67.32 83.98 107.81 128.96 160.68 202.15 254.34 343.47 439.19 551.03 683.3 548.26 691.4 868.23 1077.81 588.75 745.83 941.91 1176.56 1336.87 1687.56 2107.12 SxTop cm3 7.13 8.48 10.54 13.2 16.47 14.19 16.97 21.14 26.6 33.47 34.35 43.92 55.1 68.33 45.69 57.62 72.35 89.82 46.73 59.19 74.76 93.38 89.13 112.5 140.47 SxBot cm3 7.13 8.48 10.54 13.2 16.47 14.19 16.97 21.14 26.6 33.47 34.35 43.92 55.1 68.33 45.69 57.62 72.35 89.82 46.73 59.19 74.76 93.38 89.13 112.5 140.47 Rx mm 41.08 40.98 40.81 40.58 40.27 60.5 60.4 60.25 60.04 59.76 78.68 78.51 78.25 77.93 92.74 92.53 92.27 91.94 96.74 96.4 96.21 95.97 116.06 115.84 115.57 Iy cm4 7.55 8.92 11.24 14.24 18.09 15.66 18.81 23.68 30.03 38.61 40.69 54.3 68.53 85.65 49.78 63 79.41 99.08 43.19 55.53 71.39 90.95 115.76 148.06 187.65 Sy cm3 2.19 2.59 3.29 4.21 5.42 3.46 4.17 5.29 6.75 8.79 7.43 10.11 12.84 16.17 9.09 11.56 14.66 18.42 7.53 9.76 12.66 16.32 16.38 21.11 27 Ry mm 18.71 18.61 18.67 18.66 18.69 23.06 23.07 23.13 23.14 23.28 27.08 27.61 27.6 27.59 27.94 27.93 27.9 27.88 26.15 26.31 26.49 26.68 34.15 34.31 34.49 Please contact Tata BlueScope Steel office before adopting for design. Non standard thickness & sizes are also available on special request. Typical Connection Handling and Storage clean, dry and free of dirt or dust to prevent difficulties LYSAGHT CEE-plus™ and ZED-plus™ sections are when tightening. delivered in strapped bundles. Ideally, deliveries Bundles of purlins must be lifted carefully to avoid should be arranged so that the period between damage. Long length should be lifted using a separator delivery and installation is minimised. If not required bar and fabric slings. Care should be taken to prevent for immediate use, bundles of purlins should be local damage at the lifting points. neatly stacked off the ground and on a slight slope so that water can drain away. If in the open, it should be protected with waterproof covers to prevent the entry of water and /or condensation. If bundle becomes wet, the purlins should be separated, wiped dry and covered. Other accessories should be treated similarly. Bolts and nuts in particular should be kept 4 Performance Corrosion Protection In accordance with the provisions of AS/ANZ A zinc coating of Z275 (275 g/m2 minimum coating 4600:1996 mass) is the standard coating class provided with cold-formed steel structures, load ® capacities have been calculated for LYSAGHT LYSAGHT CEE-plus™ and ZED-plus™ sections. sections using approved LYSAGHT bridging systems, This will provide a long and trouble-free life for bolting and other accessories. Sections chosen enclosed buildings and open-sided rural buildings, using the data provided in the tables will perform as in a non-aggressive environment. A non-aggressive specified when the design, fabrication and erection environment is 1000 m from rough surf, 750 m from are carried out in accordance with Tata BlueScope industrial emission and fossil fuel combustion and Steel recommendations 300 m from calm salt waters. Consideration must ® and accepted building practice. Application Area LYSAGHT ZED-plus™ sections may be used over be given to the nature of activities performed within the building. For corrosive environment, please seek advice from Tata BlueScope Steel office. single spans, un-lapped continuous and lapped Compatibility with other Steel Products continuous spans in multi-bay buildings. Lapped The zinc coating on purlin is fully compatible with continuous spans result in a considerable capacity the zinc and aluminum / zinc coatings used on roof increase in the system. LYSAGHT CEE-plus™ sections and wall sheeting. If minor damage occurs to the may be used in single spans and un-lapped continuous purlin coating, the base steel is protected by its own spans in multi-bay buildings. CEE-plus™ sections are surrounding coating. Furthermore, the protective ideal as eave Purlin or where compact sections are coating on the sheeting is not corroded by an required for detailing. CEE-plus™ sections cannot be un-protected base steel nearby. lapped. 5 Applications Airports Commercial Buildings Indoor Stadiums BP/PM/0316/Savai For further technical assistance mail us at : lysaght@tatabluescopesteel.com Note: “©2016 Tata BlueScope Steel Limited. All rights reserved. No part of this brochure may be reproduced or transmitted in any form or by any means, electronic or mechanical including photocopy, recording, or any information storage and retrieval system, without permission in writing from Tata BlueScope Steel Ltd. All brand names mentioned in this brochure are registered trademarks of BlueScope Steel Limited under license to Tata BlueScope Steel Limited." 6 For more information, please contact: North Region Gurgaon: Tel: +91 124 4712801 East Region Kolkata: Tel: +91 33 40061945 West Region Mumbai: Tel: +91 22 66743329 South Region Chennai: Tel: +91 44 42693319 Tata BlueScope Steel Ltd. CIN: U45209PN2005PLC020270 Regd. Office: The Metropolitan, 4th Floor, Final PlotNo. 27, Survey No. 21,Wakdewadi, Shivaji Nagar, Pune - 411005. INDIA. Tel: +91 20 6621 8000 Website: www.tatabluescopesteel.com Email: lysaght@tatabluescopesteel.com