3/21/22, 5:59 PM Executables CPPS release 6.07 executables The 'HPS' client of CPPS is only supported to run under Windows 10. Please find below the Installation instructions. Install CPPS 6.07x exe To download CPPS 6.07x exe, see attachment: CPPS6.07x.exe Read and follow the CPPS installation instructions documentation carefully (Including instruction to work with Secure PCOMM sessions). For windows 10: HOWTO Install Instruction for CPPS607x v1.5 WINDOWS10.docx IMPORTANT: do not use Personal communications (PCOMM) Version 14 (64bit) IMPORTANT: No longer use MP2ZCP5 as target CICS system. That may only used for system/system connectivity, not for individual user access. Note: From the application CPPS/HPS there is no reason to upgrade from PCOMM V12 to V13 or V14. In summary: PCCOMM V12 - Supported by CPPS/HPS PCCOMM V13 - Supported by CPPS/HPS PCCOMM V14 32bit - Supported by CPPS/HPS PCCOMM V14 64bit - NOT Supported by CPPS/HPS Known installation errors Run-time error '75' - Path/File access error Solution: User should have edit access to the services file, refer to Install instruction guide chapter . "Change permission to TCPIP services file" Run-time error '76' - Path not found Solution: By default Windows OS should have TEMP folder in C:\ drive. If it is not available, create a C:\TEMP folder. Run-time error '48' - File not found : PCSHLL32.DLL Solution: Most likely you are using a Personal Communications v14 64-bit install. These are not supporting. Install the V14 32-bit version instead CPPS Mac support Due to technical restrictions both the CPPS HPS on-line application and Personal Communication (PCOMM) application are not supported on a Mac. We strongly advise you not to choose for the Mac as long as you are an active user of the CPPS HPS on-line application and/or PCOMM. file:///C:/Users/hayat/Downloads/Executables.html 1/2 3/21/22, 5:59 PM Executables Users only using the CPPS online applications on web (CAS, CBS, CRV RIC, SPLM) are probably not restricted using Mozilla Firefox webbrowser. Connect to the IBM network via Partner Connect Third parties need to work with IBM’s logistic application CPPS. In order to do so they need to connect to the IBM Network. A solution to connect to the IBM network via Partner Connect is provided. Use below installation procedure to setup and configure all needed software to connect to the IBM network via Partner Connect and use CPPS. HOWTO CPPS Partner Connect Installation and User Guide v0.3.docx In case you experience problems with the installation please contact the support team on Slack: #cio-sposupport in the Slack IBM CIO workspace. file:///C:/Users/hayat/Downloads/Executables.html 2/2
