1. T=950 C (see attached file below 2. a.) Primary Creep Strain Rate: Primary creep strain rate is the initial rate of creep accumulation during the transient stage of creep, characterized by a relatively high strain rate that gradually decreases until it reaches the steady-state/secondary creep rate. Minimum Creep Rate: Minimum creep rate is the lowest strain rate at which significant creep deformation occurs in a material. It signifies the threshold below which creep is considered negligible and is typically determined through experimentation or creep testing under different stress loads and temperature conditions. Creep Activation Energy: Creep activation energy enables atomic rearrangements and diffusion processes necessary for creep deformation in a material. It also measures the temperature sensitivity of creep and is most of the time determined by analyzing the creep behavior at different temperature settings. b.) 3 other ways to characterize the creep properties Instantaneous elastic strain is the strain at which is present elastically in the body at a certain instant Rupture Lifetime is the lifetime of material before it fails. Creep Deformation tells us the deformation at each stage. HW IS "p f + = 273)20 lagtr + + No log(210) ( 273)(20 + 27 3 - = + 10