WASHINGTON ALLOY CO. Material Test Report A Division of U.S. Alloy Co. 7010-G REAMES ROAD CHARLOTTE, NC 28216 MC:2 sales@washingtonalloy.com Page : 1 of 1 www.weldingwire.com CUSTOMER : P . O Certificate DATE : No. : No. : Brand Name Classification Diameter (inch) Lot No. Weight (LB) Remark ER70S-3 AWS ER70S-3/ AWS ER49S-3 1/8 0C03202 500 - 1. APPLIED CODE : AWS A5.18/A5.18M:2017, EN10204 3.1 3. RADIOGRAPHIC TEST 2. MECHANICAL PROPERTIES OF WELD METAL Item Tension Test Charpy Absorbed Energy Elon. (%) R . A (%) ℉) Y . S (psi) T . S (psi) Spec. (min.) 58,000 70,000 22 - 20 Result 65,122 79,916 33.9 - 131, 141, 127 Aver : 133.0 5. CHEMICAL COMPOSITION 4. HEAT TREATMENT (ft-lbf) ( Weld Metal (at 0 Fig. 5 NR Accept. Filler Metal ) (unit : %) Elements C Mn Si P S Cu Ni Cr Mo V Spec. (max.) 0.06~ 0.15 0.90~ 1.40 0.45~ 0.75 0.025 0.035 0.50 0.15 0.15 0.15 0.03 Result 0.084 1.14 0.62 0.016 0.009 0.11 0.027 0.041 <0.001 <0.001 (unit : inch) 6. FILLET WELD TEST Welding Fillet Weld Size Item Position L1 Fillet Weld Leg Difference Between L2 Length of fillet legs L3 Dimension of Fillet Weld Convexity Spec. Not required H Result L2 Spec. L3 L1 Not required OH L1 Result L1 L3 Spec. Not required V Concave fillet Result L1/L2 Convex fillet 7. THE OTHER TESTS Item Spec. Result Moisture Test max. (%) NR Hydrogen Test max. (㎖/100g) NR Bend Test Remark Crack : max. Result mm NR - Certification and Limited Warranty-This certificates that the product supplied will meet the requirements of the noted classification and data above. Products supplied in accordance to the Quality Management System of Washington Alloy Company. Results may vary from other particular testing or specific batches, heats or lots. Certification Administrator