4 ZONE PANEL
AW-CFP2166-4C
The AW-CFP2166 series conventional
fire alarm panel is designed based on
EN54 part 2 4 standard. And it is the
central part of conventional fire alarm
system, designed for applications
requiring smoke detector, bell, manual
pull stations, and sprinkler supervision.
Each zone can be disabled by a button.
＆
-4 zones
-2 bell outputs
-1 Fire relay
-1 fault relay
-Plastic front cover & metal back cover
-Embeded in wall type
-LPCB Sertificate
SMOKE DETECTOR
AW-CSD311
AW-CSD311 is photo-electronic
detector using a state-of-the-art
optical sensing chamber. This
detector is designed to provide open
area protection and to be used with
most conventional fire alarm control
panel.
Product Features:
1. Strong Adaptability For Circumstance
2. SMT Design, High Stability
3. 40-60vdc Wide Voltage Operating Range
4. Low Standby Current
5. Power Supply Non-Polarized input
6. Twin Led For 360 Visual
7. Flashing Led Power Indicator
8. Remote Led Indicator Output(2-Wire)
9. Metal Shield. Anti-Electromagnetic
Interferences
8 ZONE PANEL
AW-CFP2166-8C
The AW-CFP2166 series conventional
fire alarm panel is designed based on
EN54 part 2 4 standard. And it is the
central part of conventional fire alarm
system, designed for applications
requiring smoke detector, bell, manual
pull stations, and sprinkler supervision.
Each zone can be disabled by a button.
＆
-8 zones
-2 bell outputs
-1 Fire relay
-1 fault relay
-Plastic front cover & metal back cover
-Embeded in wall type
-LPCB Sertificate
HEAT DETECTOR
AW-CTD321
AW-CTD321 is photo-electronic
detector using a state-of-the-art
optical sensing chamber. This
detector is designed to provide
open area protection and to be
used with most conventional fire
alarm control panel.
Product Features:
1. Strong Adaptability For Circumstance
2. SMT Design, High Stability
3. 40-60vdc Wide Voltage Operating Range
4. Low Standby Current
5. Power Supply Non-Polarized input
6. Twin Led For 360 Visual
7. Flashing Led Power Indicator
8. Remote Led Indicator Output(2-Wire)
9. Metal Shield. Anti-Electromagnetic Interference
MANUAL CALL
POINTAW-CMC2166-5
AW-CMC2166-5 Manual Call Point With Indicator installed
in public places, when people confirm the fire broke out,
pressing the button on the plexiglass sheet, it will send a
signal to the fire alarm control panel, after the fire alarm
control panel receives the alarm signal, showing that the
number or location of the alarm button and the alarm
sound.
Product Features:
1. The Manual call points are high reliability and
easy
installation.
2. Available for flush or surface mounting
3. DC24V or AC220V powered, two wire connection
4. Suitable for most conventional fire alarm system
6 INCH BELL
AW-CBL2166
The product is the fire alarm, a fire alarm device,
generally used for more staff in public areas. In the
event of an emergency situation is controlled by
the alarm controller to trigger an alarm, one for
each region under normal circumstances, be used
for fire alarms, good warning sound effects.
Product Features:
1. Appearance, firm structure;
2. Easy to install, the typical American
installation;
3. Has low power consumption, large volume,
ring-tones crisp, continuous work extremely
long life characteristics;
4. Perfectly configured in a variety of alarm
systems.
STROBE SOUNDER
AW-CSS2166-2
AW-CSS2166-2 Fire Strobe Sounder is a kind of
terminal device for alarm; it is used for the sound and
light alarm when the fire happens.
Product Features:
1. Adopt the two-wire or the four-wire system wiring
method
2. The main line end receives two main lines,
No polarization
3. Connect the power end to DC24V power line.