Republic of the Philippines
Department of Education
Region III – Central Luzon
Schools Division of City of Meycauayan
MEYCAUAYAN NATIONAL HIGH SCHOOL
Camalig, City of Meycauayan, Bulacan
3rd Quarter Summative Test in Technical Drawing
SPTVE 7
Ghag
Name:
Grade and Section:
Score:
Subject Teacher:
Date:
I. Multiple choice: Choose the letter of the correct answer. Write your answer on separate sheet of paper.
1. Used to show visible edges or contours of an object.
a. visible line b. center line c. cutting plane line
d. dimension line
2. A solid line with a Z symbol inserted in several places and done mechanically and applicable for big objects only.
a. leader line b. long break line
c. reference line
d. section line
3. Used to show the centers of holes of circular object or shape.
a. visible line b. center line c. cutting plane line
d. dimension line
4. Represented by a series of medium weight dashes used to show the hidden or invisible edges of an object.
a. cutting plane line
b. dimension line
c. extension line
d. hidden line
5. Used to show a surface that has been cut in a section view. The surface indicated with section line is presumed to be
solid portion.
a. long break line
b. reference line
c. section line d. visible line
6. Indicates the limit of a dimension line.
a. extension line
b. hidden line c. leader line d. long break line
7. An irregular fine curve line with an arrowhead at one end used for indicating the measurement and name of a part.
a. long break line
b. reference line
c. section line d. visible line
8. Used to show the size or measurement of an Object.
a. cutting plane line
b. extension line
c. dimension line
d. hidden line
9. Used to show where a section has been taken; arrows on the end show the direction in which the section was taken.
a. dimension line
b. cutting plane line
c. extension line
d. hidden line
10. Used to direct descriptive major information, notes, or special dimensions to features on the drawing and done
mechanically.
a. extension line
b. hidden line c. leader line d. long break line
11. The opposite view of the front view. It is located aligned after either at the right side or left side view.
a. front view b. left side view
c. right side view
d. rear view
12. It is drawn vertically aligned and below the top view.
a. front view b. left side view
c. right side view
d. rear view
13. Three views of an object, the width of the object is drawn as a horizontal line, but the depth can be drawn back at
any angle.
a. isometric
b. oblique
c. orthographic d. perspective
14. This view is drawn above the front.
a. front view b. left side view
c. right side view
d. top view
15. It is a Greek word which means “to draw”.
a. graphos
b. grathos
c. ortho
d. orthos
16. It is aligned with the front view and located at the left side.
a. bottom view b. left side view c. rear view
d. right side view
17. This is drawn vertically aligned and below the front view.
a. bottom view b. left side view c. rear view
d. right side view
18. These are the three regular views, the top, front and __________.
a. bottom view b. left side view c. rear view
d. right side view
19. It is the distance form left side to the right side.
a. depth
b. dimension c. height
d. width
20. The distance from front to rear.
a. depth
b. dimension c. height
d. width
21. It is the distance elevation from top to bottom.
a. depth
b. dimension c. height
d. width
22. The width of the top view is equal to the width of the __________.
a. bottom view b. front view c. rear view
d. side view
23. When the line or edge is viewed perpendicularly to a plane of projection it will
appear as a __________.
a. curve line
b. inclined line c. line d. point
24. Orthographic Views are represented in what shape?
a. h-shape b. l-shape c. t-shape d. v-shape
25. Orthographic View is visualized using what type of box?
a. glass b. paper
c. steel d. wooden
26. This is drawn vertically aligned and below the front view.
a. bottom view b. left side view c. rear view
d. right side view
27. These are the three regular views, the top, front and __________.
a. bottom view b. left side view c. rear view
d. right side view
28. It is the distance from left side to the right side.
a. depth
b. dimension c. height
d. width
29. This distance from front to rear.
a. depth
b. dimension c. height
d. width
30. It is the distance elevation from top to bottom.
a. depth
b. dimension c. height
d. width
31. The width of the top view is equal to the width of the __________.
a. bottom view b. front view c. rear view
d. side view
32. When the line or edge is viewed perpendicularly to a plane of projection it will appear as a __________.
a. curve line
b. inclined line c. line
d. point
33. Orthographic Views are represented in what shape?
a. h-shape
b. l-shape
c. t-shape
d. v-shape
34. Orthographic View is visualized using what type of box?
a. glass b. paper
c. steel d. wooden
35. The opposite view of the front view. It is located aligned after either at the right side or left side view.
a. front view b. left side view c. rear view
d. right side view
36. It is drawn vertically aligned and below the top view.
a. front view b. left side view c. rear view
d. right side view
37. Three views of an object, the width of the object is drawn as a horizontal line, but the depth can be drawn back at
any angle.
a. isometric
b. oblique
c. orthographic d. perspective
38. This view is drawn above the font.
a. front view b. left side view
c. right side view
d. top view
39. It is a Greek word which means “to draw”.
a. graphos
b. grathos
c. ortho
d. orthos
40. It is aligned with the front view and located at the left side.
a. bottom view b. left side view c. rear view
d. right side view
41. An object on a plane having only length and breadth.
a. Projection b. Extension Line
c. Metric System
d. Dimension
42. It is the length of the arrowheads.
a. 3mm b. 4mm c. 5mm d. 6mm
43. It is a thin and solid line that extends from a point on the drawing to which the dimension refers.
a. Dimension Line
b. Extension Line
c. Measuring d. Line
44. It is a gap distance between extension line and object line.
a. 2mm b. 3mm c. 4mm d. 5mm
45. It is the exact width of the arrowhead
a. a. 3mm
b. 4mm c. 5mm d. 6mm
46. A radial or linear length (width, height, depth) labeled on a technical drawing.
a. Dimension b. Extension Line
c. Measuring d. Line
47. It is an international system of measurement.
a. English System
b. metric System
c. unit System d. None of the above
48. An American standard system of measurement.
a. English System
b. metric System
c. unit System d. None of the above
49. An act of measuring.
a. Dimension b. Extension Line
c. Measuring d. Line
50. The process or result of measuring anything.
a. Dimension b. Extension Line
c. Measuring d. Line
Prepared by:
Checked by:
Parent’s Signature
Noel Jose B. Malanum
Teacher I
Evangeline F. Corañes
Head Teacher IV
________________