2016 Rotary Dryer Equipment Manufacture Professional Drying Solution-Industrial Dryer Plant Designer. Gary Li +Tel:+8617367842747 Zhengzhou Hengyang Industry Co., Ltd 2016-6-7 Hengyang Industry Zhengzhou Hengyang Company is mainly produce and installs rotary dryer plant, the capacity from 0.5t/h—120t/h. Extensive experience has been gained with a wide range of thermal processing equipment designed to meet the demands of modern day process industries worldwide. With engineering and sales offices in city center (Zhengzhou city), middle of China. The Rotary Dryer Despite the introduction of new technology, the long established Rotary Rotary Dryer is still widely regarded as the workhorse of many process industries. The robust yet simple construction combines flexibility with reliability, enabling this type of dryer to handle a vast range of materials and to operate continuously under the most arduous conditions. The design also permits the use of the highest possible drying temperatures and in contrast to other dryers is not sensitive to wide variations in material size, moisture content or throughput. Calcination Materials Mineral Material Coal slime Gypsum Sand Clay Sludge Refactory material Phosphates Limestone Specifications Diameter: 600mm to 3500mm Length: 8000mm to 65 000mm Methods of heating: Direct or indirect Capacity: 500kg/h to 175t/h Fuel: coal, natural gas, heavy oil, etc Temp range: 200-700°C Material: Carbon steel, Stainless steel, etc Thickness: 8mm to 70mm Principles of Operation In its simplest form, the Rotary Dryer consists of a slightly inclined rotating cylinder, fitted with a series of peripheral flights arranged to lift, distribute and transport the material. The flights are designed to suit the particular handling characteristics of the material, which may vary with increasing dryness. The principle of operation is based on showering, or cascading the wet material through a hot gas stream, flowing either co-current or counter-current to the solids. The hot gas induces the evaporation of the moisture. The heat lost to the material and evaporation of water vapor reduces the gas temperature rapidly, such that it leaves the dryer at a comparatively low temperature. The efficiency of the dryer is largely dependent on the differential between the inlet and exhaust gas temperatures, although the heat transfer rate is also influenced by the relationship between the design of flights and the speed of rotation. However, irrespective of the gas and material temperatures the drying (or residence) time may be critical, as this is governed by the rate of diffusion of water from the core to the surface of the material. For special applications, the rotary cascade design is adapted to provide a shortfall, or ‘Cruciform’, lifter configuration. To Atmosphere Dust Collector The choice of dust collectionequipment will vary accordingto the application, but inaddition to the range of highefficiency and high capacitycyclones, a bag filter, wetscrubber or scrubber/condensercan be supplied as required. Rotary Dryer Application: 1 Wet feed in contact with the hottest drying gases suppliedfrom an external source, where heat transfer isby convection. crystallineproducts (low temperature range) ammonium nitrate, oresand minerals, pigments, removal of floatation reagents. 4Final product in contact with the hottest drying gases suppliedfrom an internal burner, providing even higher thermalefficiency, where heat transfer isby convection and radiation. Suitable for filter cakes, minerals, fertilizers,beet pulp, de-greased bone, floatation concentrates, coal/coke,clays, phosphates, animal feeds, germ, stillage, sludge. 2 Wet feed in contact with the hottest drying gases from aninternal burner, providing higher thermal efficiency, whereheat transfer is by convection and radiation. Suitable for road stone, sand, gravel, crushed rock, limestone,slate, pigment ‘fixing’, combined drying/pre-heating andcalcining. Contact with us if need our rotary dryer plant, but you also need to let us know: Suitable for heavy ores, crushed rock and stone, sand, slag,refractory materials, limestone/clay separation. 3 Final product in contact with the hottest drying gases suppliedfrom an external source, where heat transfer isby convection. 1 What material do you need to dry? 2 What is the production capacity? 3 What is originalmoisture and final water content? 4 When and where do you use our machine? 5 Do you only need one dryer machine, or also need dust collector, conveyor, etc? 7 Is there any plan to come and visit us? 8 Do you have special requirement for outside color? 9 What kind of heating sources do you prefer to use? We provide you technical details if let us know your requirement. Mail: sell@chinadjks.comskype: gary102884 Suitable for silica gel, sugar, chemical salts and Our Rotary Dryer: Note: the color is according to you buyer’s requirement. Rotary Coolers: The Rotary Cooler always operates in counter-flow, but isotherwise similar to the Rotary dryer, the hot gases beingsubstituted by ambient or chilled air, which is in direct contactwith the material. In general this type of cooler is used forlower temperature, coarse product applications or inconjunction with an indirect system. For dusty and/or high temperature applications, where spaceis limited, or where the material must be cooled to atemperature approaching ambient, Indirect Rotary Coolers canbe supplied. These require either a continuous or recirculatedwater supply and are available in two forms - external sprayand sectional coolers. Either system may be used for coolinghot products discharged from kilns, of the unit and recirculated. calciners or ovens attemperatures up to 1000ºC. External Spray Type Water Coolers are of simple design andoperate on the principle of heat transfer through the rotatingcylinder wall, which is continuously irrigated by a series ofexternal water sprays mounted above the unit. The water ispartially evaporated as steam, while the excess is collectedfrom the underside The Sectional Cooler offers an efficient indirect system, whichhas the advantage of presenting a much larger cooling surface,while maintaining the water in closed circuit. The sectionaldesign ensures that the hot material is in continuous contactwith the water-cooled walls of the vessel. The individualproduct chambers also ensure gentle action thus avoidingdegradation of the material. Zhengzhou Hengyang Industry Co., Ltd Tel: +86-371-67575157 Fax: +86-371-67571922 Mob: +86-17367842747 Mail: sell@chinadjks.com Add: 500m West, crossroad of Rizhao and Industrial Road, Zhengzhou city, China.
