Technological University of the Philippines – Taguig
Km. 14 East Service Road , Western Bicutan Taguig City
VISION: The Technological University of the Philippines shall be a premiere state university
with recognized excellence in engineering and technology education at par
with the leading universities in the ASEAN region.
I.
Objectives:
At the end of the period the students should be able to:
1. Repair defective tools
2. Follow the procedures in basic preventive maintenance
3. Conduct preventive maintenance of carpentry tools
II.
Subject Matter:
Application of Makeup
Reference: Technology and Livelihood Education Module 4
by: Al Rey P. Pelongco
III. Materials:
1.
2.
3.
5.
Laptop
Projector
PowerPoint Presentation
Video
IV.
Procedure:
TEACHER’S ACTIVITY
STUDENT’S ACTIVITY
A. Preparation
* Good morning, Class!
* Good morning po Sir.
* Please remain standing and Let’s Pray first *Praying…
bow your heads and feel the presence of
the Lord.
* Okay class, now take your sit and I’ll do
Attendance, say present if I call your name.
B. Motivation
* Let us start your discovery by arranging the scrambled letters.
* The game titled “Rumble me”
* I will show a picture indicating the scrambled names, you need to rumble it to get
the correct answer.
C. Lesson Proper
* Did you get the right answers? Good
job! Now, proceed to more learning
journey ahead!
*Thank you po sir.
* At this point, we are now on the
substance of the lesson. Let’s get it on.
* “Presenting the PPT of the topic”
* Okay class, first is the Importance of
Repair.
-again, why is important to repair and
maintain your tools and equipment? Raise
your hands if you want to answer
(Called one student)
*Raising their hands…
-Sir. It is important because it can help
you to be always prepared.
-Very good!
* Next is, Things to Keep a Watch
-Why we should not use defective tools?
Please raise your hands if you want to
answer...
(Called one student)
-Very good!
*Sir, to prevent serious cause and harmful
injuries
*
* Now, we are in the main topic of this
lesson
“Conduct Preventive Maintenance of
Carpentry Tools”
* Let’s start in the Preventive
maintenance
-What are the three types of
Maintenance? Raise your hand if you want
to answer
(Called one student)
-Very good!
* Some steps in conducting Basic
Preventive Maintenance:
A. Hand tools
1. Clean dirt and debris from tools
after each use.
2. Oil metal parts to prevent rust.
3. Lightly sand rough wooden handles
and apply linseed oil.
4. Repair loose handles.
5. Sharpen blades of cutting tools.
6. Store tools in a clean dry storage
area.
7. Protect surfaces of cutting tools in
storage.
B. Electric Powered Tools and Equipment
1. Clean out the dust
2. Check the cords
3. Use the right tool correctly
4. Protect your Power tools
5. Use double-insulated tools
* Sir, the three types of maintenance are
-Breakdown Maintenance
-Preventive Maintenance
-Corrective or Predictive Maintenance
6. Storing Your Tools
7. Lubricated moving parts
8. Follow the maintenance schedule
* Repair of Defective Carpentry Tools
* Steps in repairing defective carpentry
tools:
A. Hand Tools
1. Inspect hand tools for damage
checking.
2. Identify parts that are damaged.
Based on the severity of the
damage, decide if it
3. is for repair or replacement.
4. Check for loose parts. Loose parts
should be tightened.
5. Dull or blunt edges should be
sharpened or replaced.
6. Remember that if the damage is
beyond repair, it should be replaced.
B. Electric Powered Tools and Equipment
1. Inspect parts such as electric cords
and connections of electric-powered
tools for damage checking.
2. Identify parts that are damaged.
Based on the severity of the
damage, decide if it is for repair,
replacement, or disposal.
D. Generalization
* In general, why is it important to conduct
preventive maintenance of carpentry tools?
* Ma’am it is important because it will help
us to prepare and to prevent us to get
harm.
E. Application
* The students will apply their knowledge of
how to perform basic preventive
maintenance
V. Evaluation
In a 1 whole sheet of paper, answer this question:
1. What are the indicators in repairing defective tools?
VI. Assignment / Agreement
Find and inspect defective tools you and conduct preventive maintenance of
carpentry tools at home. Write your answer in your activity sheet.
Prepared by:
Apple Dela Cruz Docasao
Submitted to:
Prof. Reginald Cutanda
P
P