Naval Education and
Training Command
NAVEDTRA 43904-E
21 September 2017
PERSONNEL
QUALIFICATION
STANDARD
FOR
SEABEE COMBAT WARFARE (SCW),
COMMON CORE
NAME (Rate/Rank)
DISTRIBUTION STATEMENT B: Distribution authorized to U.S. Government agencies only due to
administrative/operational use on 21 September 2017 . Other requests for this document must be
referred to the Commanding Officer, Naval Education and Training Command, 1905 Regulus Ave,
Virginia Beach VA 23461.
DESTRUCTION NOTICE: Destroy by any means that will prevent disclosure of contents or
reconstruction of the document.
Unclassified technical documents bearing this distribution statement will be given the same physical
protection prescribed in SECNAVINST 5720.42F for "For Official Use Only" material.
Although the words “he”, “him,” and “his” are
used sparingly in this manual to enhance
communication, they are not intended to be
gender driven nor to affront or discriminate
against anyone reading this material.
PREFACE
Warfare Qualified Sailors are an essential element of our Navy’s Operational Primacy. The
objective of the Seabee Combat Warfare Program is to provide the candidate an introduction
into the processes and topics necessary to support the warfighting requirements of our Navy.
This personnel warfare qualification standard will focus on mission effectiveness, combat
readiness and survivability as well as introducing an overall understanding of how an individual
unit mission fits into and supports naval doctrine and its objectives. Experience shows it is
essential that every warrior in our Navy be totally familiar with the mission of their command
and be able to apply this knowledge to support the successful execution of the command’s
current and future missions.
ii
CHANGE PAGE - SUMMARY OF CHANGES
Fundamental Title









Action
Comment
101 Safety:
o Added reference, OPNAVINST 5102.1D, Navy and Marine Corps Mishap and
Safety Investigation Reporting and Record Keeping Manual
o Changed “ACB” to “PHIBCB” throughout standard.
o Added question: Describe your units program on, hearing conservation,
respiratory protection, and fall protection.”
102 Naval Heritage:
o Updated individual line item locations.
103 Administration Command and Control:
o Deleted 103.1 a. Naval Construction Group.
o Question 103.2, deleted item c. “Naval Construction Regiment (NCR)” then
added NCG 1 & 2.
o Updated location of referenced line items.
o Added question “In regards to reservists, explain the following: a. AT, b. ADT, c.
ADSW, d. IDT, and e. mobilization orders”
104 Basic First Aid:
o Updated Hospital Corpsman reference, from NAVEDTRA 14295 to NAVEDTRA
14295B
o Deleted question 104.4, “Discuss the capabilities of the Combat Life Saver.”
o Deleted question 104.13, “Explain when and why a cold pack or heat pad would
be used on a sprain.
105 Hazardous Material:
o Updated references [b] & [c].
o Deleted 105.4 question “Explain the storage procedures for incompatible
material”.
106 Supply / Logistics.
o Updated NAVSUP P-485 to version 5.
o 106.2 b. Deleted COSAL updates
o Changed 106.5 c. from DRMO to Defense Logistics Agency (DLA).
o Updated individual line item locations.
o Added question “Discuss the purpose of the TOA”
107 Communications: Updated reference [a] EKMS 1 to EKMS 1E.
o Changed question 107.1 from “List communication gear in your units TOA” to
List TOA communication gear and the capabilities of each”
o Changed question 107.11 from AN/PRC-117F to 117G.
o Changed 107.12b to “Simple Key Loader” & updated references to reflect.
o Added question, “Describe the function of the Single Channel Ground Air radio
System (SINGARS).
108 Weapons Fundamentals:
o Changed reference [b] from NAVEDTRA 14324 to NAVEDTRA 14324A
o Reference [d] and [l], fixed incomplete reference title.
o Changed 108.4 from M16A3 to M16E3.
o Changed 108.9 to include identifying the number of rounds each magazine holds.
109 General Military Tactics:
o Deleted question 109.5 “State what action should be taken if you are caught in
the light of a ground flare and overhead flare?” this is already covered in question
109.29.
Deleted question 109.5 “State the eleven general orders of a sentry and the
importance of standing CP/COC watch.
o Changed 109.6 from ref. b to ref. a.
o Modified 109.16 question from “establishing a defense” to “occupation of the
defense”.
o Removed question 109.24, “ROE is defined in the battalion TACSOP.”
o Deleted 109.27 d. “tanglefoot” as it is not used by Seabee units.
o Changed 109.29 from “Discuss theiiifollowing formations, a. column b. wedge c.
skirmishers d. Echelon right / left” to Discuss the different combat maneuvers,
formation and ambush procedures for patrolling.
o 109.30 deleted items, a. Convoy & b. Patrol to “Describe immediate actions for
enemy contact during convoy operations.”
109 General Military Tactics (Cont’d):
o Moved 109.31 “Discuss challenge and password” to section 107
Communications, Security Material System Fundamentals.
110 Contingency Operations:
o Updated individual line item locations.
o Updated references.
111 Chemical, Biological, and Radiological (CBR):
o Updated individual line item locations.
112 Embarkation
o Updated individual line item locations.
o Added question “Describe the purpose and procedures of the Mount-Out Control
Center (MOCC).
113 CESE:
o No changes.
301 Tasks:
o Added task, “Conduct sand table demonstration showing personnel and vehicle
routes / movements.”
o Added task, “Demonstrate Convoy Formations”
o






TABLE OF CONTENTS
iv
Page
PREFACE……………………………………………………………………………………………….i
CHANGE PAGE - SUMMARY OF CHANGES……………………………………………………. ii
ACKNOWLEDGMENTS……………………………………………………………………………… 03
INTRODUCTION……………………………………………………………………………………… 04
ACRONYMS…………………………………………………………………………………………… 06
PROFESSIONAL LIBRARY…………………………………………………………………………. 07
100
INTRODUCTION TO FUNDAMENTALS………………………………………………….. 08
101
102
103
104
105
106
107
108
109
110
111
112
113
General Safety Fundamentals……………………………………………………………….
Naval Heritage and Doctrine Fundamentals……………………………………………….
Administrative/Command and Control Fundamentals…………………………………….
Basic First Aid and Personal Hygiene Fundamentals…………………………………….
Hazardous Material/Hazardous Waste Environmental Safety Fundamentals………….
Supply/Logistics Fundamentals……………………………………………………………..
Communications Security Material Systems Fundamentals……………………………..
Weapons Fundamentals……………………………………………………………………..
General Military Tactics Fundamentals……………………………………………….…….
Contingency Operations Fundamentals………………………………………………….…
Chemical, Biological, and Radiological (CBR) Warfare Fundamentals…………………
Embarkation Fundamentals………………………………………………………………….
Civil Engineer Support Equipment (CESE) Fundamentals……………………………….
300
INTRODUCTION TO WATCHSTATIONS…………………………………………………. 54
301
Seabee Combat Warfare (SCW), Common Core…………………………………………. 56
09
12
14
18
22
24
27
30
37
43
47
50
52
Qualification Progress Summary……………………………………………………………………...60
List of References………….…………………………………………………………………………… 62
PQS Feedback Form………………………………………………………………………………...…65
ACKNOWLEDGMENTS
NETC gratefully acknowledges the assistance of the following personnel in writing this
PQS:
Subject Matter Experts (SMEs) September 2017 Revision:
UCT (SCW/EXW/FMF) Michael DeAngelo
NSF Thurmont
BUC (SCW/FMF) Deanna A. Heisserer
NCG 1
BUC (SCW) Jesse VanAusdoll
NCG 2
EOCS Jason Knifley
NCG 2
CUCS (SCW/EXW) James Stuart Davenport
NMCB 18
SWC (SCW/EXW) Juan Jose Delafuente
NMCB 18
EOCS (SCW) Denise Demontagnac
NAVFAC
BUC (SCW/EXW) Craig Kleffel
NMCB 5
SW1 (SCW/EXW) Chad A. Seward
NMCB 5
BU1 (SCW/EXW) Steven J. Williams
NMCB 5
BU1 (SCW) Todd J. Simpson
NMCB 5
CUCS (SCW/EXW) Kirk David Johnson
NMCB 4
Gunnery Sergeant Issac Sato
NMCB 4
Command Support September 2017 Revision:
NETC’s PQS Program Manager recognizes the following commands for the time and effort
put forth reviewing and providing feedback to improve this standard:
Amphibious Construction Battalion TWO, San Diego, CA
Subject Matter Experts (SMEs) 2014 Revision:
EACS (SCW)
Siegfred L. Pitpitan NMCB ONE
BUC (SCW)
John M. Thomas
NCG 1
EAC (SCW)
Craig Miller
NMCB FIVE
SWC (SCW / FMF) Mark Pembleton
NMCB THREE
UTC (SCW)
Miguel Fernandez
NMCB THREE
BUCS (SCW)
Ian Doyle
NMCB FIVE
BUCS (SCW)
Erwin J. Hoffman
NCG2
CE1 (SCW)
Darwin D. Garza
NAVFACSW
BU1 (SCW)
Wesley R. Harris
NMCB 4
EO1 (SCW/FMF)
Russell Sturtevant
NMCB 4
UT1 (SCW/SW)
Richard L. Johnson NMCB 5
Learning Center Support:
PQS Development Group personnel who provided direct support for this PQS:
Mr. Richard D. Bucholtz, CSFE, Port Hueneme, CA
Jenny McKinney, CTR ADMIN Support, Port Hueneme, CA
*The PQS Manager for this PQS: Center for Seabees and Engineering (CSFE) DSN 5511598
3
INTRODUCTION
PQS PROGRAM
This PQS program is a qualification system for officers and enlisted personnel where
certification of a minimum level of competency is required prior to qualifying to perform specific
duties. A PQS is a compilation of the minimum knowledge and skills that an individual must
demonstrate in order to qualify to stand watches or perform other specific routine duties
necessary for the safety, security or proper operation of a ship, aircraft or support system. The
objective of PQS is to standardize and facilitate these qualifications.
CANCELLATION
This standard cancels and supersedes NAVEDTRA 43904-D, June 2014.
APPLICABILITY
This PQS is applicable to all personnel serving in Naval Construction Force units, which are
authorized to grant Seabee Combat Warfare designations IAW OPNAVINST 1410.1 (series).
MODEL MANAGER
The Model Manager Command manages a specific PQS manual. This includes overseeing the
process of monitoring and updating assigned PQS manuals from the standpoint of technical
content and relevance within the community.
QUALIFIER
The PQS Qualifier is designated in writing by the Commanding Officer to sign off individual
watchstations. Qualifiers will normally be E-5 or above and, as a minimum, must have
completed the PQS they are authorized to sign off. The names of designated Qualifiers should
be made known to all members of the unit or department. The means of maintaining this listing
is at the discretion of individual commands. For more information on the duties and
responsibilities of PQS Qualifiers, see the PQS Unit Coordinator’s Guide.
CONTENTS
PQS is divided into three sections. The 100 Section (Fundamentals) contains the fundamental
knowledge from technical manuals and other texts necessary to satisfactorily understand the
watchstation/workstation duties. The 200 Section (Systems/Mission Areas) is designed to
acquaint you with the systems you will be required to operate at your watchstation/workstation.
The 300 Section (Watchstations) lists the tasks you will be required to satisfactorily perform in
order to achieve final PQS qualification for a particular watchstation/workstation. All three
sections may not apply to this PQS, but where applicable, detailed explanations are provided at
the front of each section.
4
INTRODUCTION (CONT’D)
REFERENCES
The references used during the writing of this PQS package were the latest available to the
workshop. However, the most current references available should be used when qualifying with
this Standard.
NOTES
Classified references may be used in the development of PQS. If such references are used, do
not make notes in this book as answers to questions in this Standard may be classified.
TRAINEE
Your supervisor will tell you which watchstations/workstations you are to complete and in what
order. Before getting started, turn to the 300 Section first and find your watchstation/workstation.
This will tell you what you should do before starting your watchstation/workstation tasks. You
may be required to complete another PQS, a school, or other watchstations/workstations within
this package. It will also tell you which fundamentals and/or systems from this package you
must complete prior to qualification at your watchstation/workstation. If you have any questions
or are unable to locate references, contact your supervisor or qualifier. Good luck!
PQS FEEDBACK REPORTS
This PQS was developed using information available at the time of writing. When equipment
and requirements change, the PQS needs to be revised. The only way the PQS Development
Group knows of these changes is by you, the user, telling us either in a letter or via the
Feedback Report contained in the back of this book. You can tell us of new systems and
requirements, or of errors you find.
5
ACRONYMS USED IN THIS PQS
Not all acronyms or abbreviations used in this PQS are defined here. The Subject Matter
Experts from the Fleet who wrote this Standard determined the following acronyms or
abbreviations may not be commonly known throughout their community and should be defined
to avoid confusion. If there is a question concerning an acronym or abbreviation not spelled out
on this page or anywhere else in the Standard, use the references listed on the line item
containing the acronym or abbreviation in question.
1NCD
ABFC
ACR
AMC
CBR
CESE
CMDCM
CNO
COMSEC
COSAL
CESE
EDVR
EMP
EPW
GFCI
HM/HW
LOGREQ
MAGTF
MCPON
MOCC
MSDS
NAAK
NATO
NECC
NCF
NCR
OPLANS
OPORDS
OPREP
OPTAR
2PAM
PCB
PPE
QDR
ROD
SECNAV
SITREP
SORTS
SOU
TPI
First Naval Construction Division
Advance Base Functional Component
Allowance Change Request
Air Mobility Command
Chemical, Biological, Radiological
Civil Engineer Support Equipment
Command Master Chief
Chief of Naval Operations
Communication Security
Consolidated Shipboard / Shore based Allowance List
Civil Engineer Support Equipment
Enlisted Distribution Verification Report
Electromagnetic Pulse
Enemy Prisoner of War
Ground Fault Circuit Interruption
Hazardous Material/Hazardous Waste
Logistics Requirements
Marine Air Ground Task Force
Master Chief Petty Officer of the Navy
Mount Out Control Center
Material Safety Data Sheet
Nerve Agent Antidote Kit
North Atlantic Treaty Organization
Navy Expeditionary Combat Command
Naval Construction Force
Naval Construction Regiment
Operational Plans
Operational Order
Operational Report
Operating Target
Pralidoxime Chloride
Polychlorinated Biphenyls
Personal Protective Equipment
Quality Deficiency Report
Report of Deficiency
Secretary of the Navy
Situational Report
Status of Resources and Training System
Special Operating Unit
Two-Person Integrity
6
PROFESSIONAL LIBRARY
No single books or group of books contained in this professional library is intended to be a
mandatory reading item when completing this manual.
RECOMMENDED READING:
The Seabee reading list is included as a source of recommended reading for personnel, who
desire to obtain additional information which supports the heritage and doctrine fundamentals
contained in this Common Core PQS manual. The information contained in these suggested
reading books should not be used as written or oral board testing material.
The Defense of Duffer’s Drift – E. D. Swinton
Builders of Battle (1946) – David O. Woodbury
Building the Navy Base’s in World War II (V1 & 2 1947)
Can Do! (1944) – William Bradford Hule
Can Do, Will Do! (1987) – Navy Seabees Veterans of America
The Civilized Engineer (1970) – Samuel C. Florman
Great Engineer (1970) – Conrad Matschoss Translated by H. Stafford Hatifield
A History of Civil Engineering (1952) – Hans Straub
Seabee: Bill Scott Builds and Fights for the Navy (1944) – Henry B. Le
The Seabees of World War II (1963) – Edmund L. Castillo The
Dammed Engineers (1985) – Janice Holt Guiles Engineering
and the Mind’s Eye (1992) – Eugene S. Ferguson The Bridge
at Dong Ha (1989) – John Grider Miller
Southeast Asia: Building the Base (1975) – Richard Tregaskis
Five Star Leadership: The Art and Strategy of Creating Leaders at Every Level Patrick L. Townsend, Joan E. Gebhardt, and forward by Nancy K. Austin
Marine: A Guide Tour to a Marine Expeditionary Unit - Tom Clancy
SUPPLEMENTAL READING:
The following lists are included as a source of supplemental reading for personnel who desire to
obtain additional information which supports the heritage and doctrine fundamentals contained
in this Common Core PQS manual. Additionally, the information contained in these suggested
reading books should not be used as written or oral board testing material.
The MCPON’s “Naval Heritage and Core Values” Reading List, Parts “A” and “B”.
As the MCPON reading list is updated annually, the most current version can be found in the
MCPON directline publication or through the internet at either of the following web addresses:
https://wwwa.nko.navy.mil/portal/splash/index.jsp
http://www.history.navy.mil/
7
100
INTRODUCTION TO FUNDAMENTALS
100.1
INTRODUCTION
This PQS begins with a Fundamentals section covering the basic knowledge and
principles needed to understand the equipment or duties to be studied. Normally,
you would have acquired the knowledge required in the Fundamentals section
during the school phase of your training. If you have not been to school or if you
need a refresher, the references listed at the beginning of each fundamental will aid
you in a self-study program. All references cited for study are selected according to
their credibility and availability.
100.2
HOW TO COMPLETE
The fundamentals you will have to complete are listed in the watchstation (300
section) for each watchstation. You should complete all required fundamentals
before starting the systems and watchstation portions of this PQS, since knowledge
gained from fundamentals will aid you in understanding the systems and your
watchstation tasks. When you feel you have a complete understanding of one
fundamental or more, contact your Qualifier.
If you are attempting initial
qualification, your Qualifier will expect you to satisfactorily answer all line items in
the fundamentals. If you are re-qualifying or have completed the appropriate
schools, your Qualifier may require you to answer representative line items to
determine if you have retained the necessary knowledge for your watchstation. If
your command requires an oral board or written examination for final qualification,
you may be asked any questions from the fundamentals required for your
watchstation.
8
101
101
GENERAL SAFETY FUNDAMENTALS
References:
[a]
OPNAVINST 3500.39C, Operational Risk Management
[b]
OPNAVINST 5100.23G, Navy Occupational Safety and Health (NAVOSH) Manual
[c]
OPNAVINST 5102.1D, Navy and Marine Corps Mishap and Safety Investigation
Reporting and Record Keeping Manual
[d]
29 CFR, 1926, Safety and Health Regulations for Construction
[e]
NAVEDTRA 14167F, Naval Safety Supervisor
[f]
NRTP 4-04.2.5, Construction Management
101.1
Define Risk. [ref. a, p. 4, encl. 5]
___________________________________
(Signature and Date)
.2
Define Hazard. [ref. a, p.15, encl. 5]
___________________________________
(Signature and Date)
.3
Discuss the concept of Operational Risk Management (ORM). [ref. a, p. 1, encl. 1]
___________________________________
(Signature and Date)
.4
Discuss the four principles of ORM. [ref. a, pp. 2 thru 3, encl. 1]
___________________________________
(Signature and Date)
.5
Explain the five steps of the ORM process: [ref. a, pp. 7 thru 15, encl. 1]
a.
b.
c.
d.
e.
Identify hazards
Assessing hazards
Making risk decisions
Implementing controls
Supervising
___________________________________
(Signature and Date)
.6
Define Hazard Severity and Mishap Probability in relation to the Risk Assessment
Code. [ref. a, encl. 1, pp. 8 thru 10]
___________________________________
(Signature and Date)
9
101
GENERAL SAFETY FUNDAMENTALS (CONT'D)
101.7
Discuss the concept of Time Critical Management (TCRM). [ref. a, p. 1, encl. 2]
___________________________________
(Signature and Date)
.8
Discuss the A-B-C-D process of TCRM. [ref. a, pp. 4 thru 6, encl. 2]
a.
b.
c.
d.
Assess the Situation
Balance Resources
Communicate to Others
Do and Debrief
___________________________________
(Signature and Date)
.9
Explain the responsibilities of the following personnel as applied to safety: [ref. e, ch.
1, p. 1-6 thru 1-9]
a.
b.
c.
d.
e.
f.
g.
h.
Commanding Officer
Executive Officer
Safety Officer
Department Head
Division Officer
Work Center Supervisor
Safety Petty Officer
All hands
___________________________________
(Signature and Date)
.10
Explain the functions of the Safety Council. [ref. b, ch. 4, p. 2]
___________________________________
(Signature and Date)
.11
Discuss the purpose of a mishap investigation and who’s responsible for conducting
the investigation. [ref. c, ch. 1, p. 1 thru 15]
___________________________________
(Signature and Date)
.12
Discuss the basic reporting procedures required when an unsafe/unhealthful working
condition report is submitted. [ref. b, ch. 10, pp. 153 thru 154]
___________________________________
(Signature and Date)
10
101
GENERAL SAFETY FUNDAMENTALS (CONT'D)
101.13
Discuss the purpose of a Safety Plan [ref. f, ch. 10, p. 1]
___________________________________
(Signature and Date)
.14
Discuss the development of a Safety Plan and the following contributing factors. [ref.
f, ch. 10, pp. 1 thru 8]
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
Project Organization Sheet
Project Scope Sheet
Definable Features of Work
Activity Hazard Analysis
Identify Required Skills and Training
Special License and Permit Required
Safety Inspection Plan Summary (Engineering Controls)
Administrative Controls
Safety Equipment Required
Personal Protective Equipment Required for Safety
Special Safety Plans
___________________________________
(Signature and Date)
.15
Discuss the execution and monitoring of a Safety Plan. [ref. f, ch. 10, pp. 9 thru 11]
___________________________________
(Signature and Date)
.16
Explain how to properly use and maintain PPE. [ref. b, ch. 20]
___________________________________
(Signature and Date)
.17
Explain when a Ground-Fault Circuit Interruption (GFCI) is required. [ref. c, 29
CFR1926, subpart K 404 (b) (1) (ii)]
___________________________________
(Signature and Date)
.18
Discuss the following programs: [ref. e]
a. Hearing conservation [pp. 5-5 thru 5-7]
b. Respiratory protection program [5-12 thru 5-14]
c. Fall protection [5-16]
___________________________________
(Signature and Date)
11
102
102
NAVAL HERITAGE AND DOCTRINE FUNDAMENTALS
References:
[a]
Naval Doctrine Publication 1, Warfare
[b]
Naval Doctrine Publication 5, Planning
[c]
NAVEDTRA 14234A, Seabee Combat Handbook, Vol. 1
[d]
NWP 4-04.1, Seabee Operations in the MAGTF
[e]
http://www.arlingtoncemetery.net/rdstethe.htm
[f]
Blue Jackets’ Manual, 23rd Edition
[g]
NTRP 4-04.2.1 Doctrinal reference for NCF
102.1
Discuss the three circumstances that led to the formation of the U.S. Navy. [ref. a,
ch.1, pp. 6 thru 7]
(Signature and Date)
.2
State and discuss the seven principles of planning to Naval operations. [ref. b, ch. 1,
p.12-17]
___________________________________
(Signature and Date)
.3
Discuss the missions of the U.S Naval Forces. [ref. f, ch. 2, pp. 17 thru 24]
(Signature and Date)
.4
Define the Navy’s Core Values. [ref. f, ch.1, pp. 9 thru10]
___________________________________
(Signature and Date)
.5
Discuss the conditions that led to the creation of the Seabees. [ref. c, ch.1, p.1.1]
___________________________________
(Signature and Date)
.6
Discuss the significance of the following personnel:
a. Admiral Ben Morrell [ref. d, ch. 1, p. 1.1; ref. g, app. C, pp. 5 thru 6]
b. CM3 Marvin Shields [ref. c, ch. 1, pp.1 thru 5]
c. SW2 (DV) Robert Stethem [ref. e]
___________________________________
(Signature and Date)
12
102
NAVAL HERITAGE AND DOCTRINE FUNDAMENTALS (CONT'D)
102.7
Discuss the significance of March 5, 1942 as it pertains to the Seabees.
[ref. c, ch. 1, p. 1-1]
(Signature and Date)
.8
Discuss the significant contributions made by the Seabees during the following:
[ref. g, app. c, pp. C-1 thru C-24]
a.
b.
c.
d.
e.
f.
g.
World War II
Korea
Vietnam
Post-Vietnam
Persian Gulf War
Military Operations Other Than War
Global War on Terror
___________________________________
(Signature and Date)
.9
State the purpose of the Civil Engineer Corps (CEC). [ref. c, ch. 1, p.1-1]
___________________________________
(Signature and Date)
.10
Identify and explain the purpose of the following ratings: [ref. f, ch. 3]
a.
b.
c.
d.
e.
f.
g.
BU
CE
CM
EA
EO
SW
UT
___________________________________
(Signature and Date)
13
103
103
ADMINISTRATION COMMAND AND CONTROL FUNDAMENTALS
References:
[a]
NWP 4-04, Naval Civil Engineer Operations
[b]
NTRP 4-04.2.1, Doctrinal Reference for Naval Construction Forces
[c]
NAVEDTRA 14234A, Seabee Combat Handbook, Vol. 1
[d]
JP 1-02, DOD Dictionary
[e]
SECNAV M 5510.30, Personnel Security Program
[f]
SECNAV M 5510.36, Information Security Program
[g]
NAVFAC P-1105, Seabee Skills Assessment Manual
[h]
http//www.necc.navy.mil
103.1
Discuss the following functional elements as they relate to Naval Civil Engineering
Forces. [ref. a, ch. 2, pp. 2-1, 2-14, 2-17, 2-19]
a. Naval Facilities Engineering Command [p. 2-11]
b. Naval Amphibious Construction Battalion [p. 2-17]
c. Combatant Command Staff Engineer [p.2-19]
___________________________________
(Signature and Date)
.2
Discuss the following as they apply to the operational chain of command. [ref. a, ch.
2, p. 2-2]
a. Commander Fleet Forces Command (CFFC)
b. Navy Expeditionary Combat Command (NECC)
c. Naval Construction Group (NCG)
(Signature and Date)
.3
Discuss the United States National Military Command, Chain of Command structure
under two distinct branches [ref. a, ch. 3, p.3-1]
a. Operational Chain Of Command
b. Service Chain Of Command
___________________________________
(Signature and Date)
.4
Define command and control (C2). [ref. a, ch. 3, p. 3-2, par. 3.1.4]
(Signature and Date)
.5
Discuss the control measures for classified information [ref. f, ch. 7, pp. 7-2 thru 7-3]
___________________________________
(Signature and Date)
14
103
ADMINISTRATION COMMAND AND CONTROL FUNDAMENTALS (CONT'D)
103.6
Discuss the levels of authority (control) [ref. a, ch. 3, p. 3-2, par. 3.1.4]
a.
b.
c.
d.
e.
f.
g.
h.
Type Commander (TYCOM)
Combatant Command (COCOM)
Operational Control (OPCON)
Tactical Control (TACON)
Support
Administrative Control (ADCON)
Coordinating Authority
Direct Liaison Authorized (DIRLAUTH)
___________________________________
(Signature and Date)
.7
Discuss the following in relation to Support Authority (Control) [ref. a, ch. 3, pp. 3-7
thru 3-8, par. 3.3.1]
a.
b.
c.
d.
e.
f.
Supported Commander
Supporting Commander
General Support
Mutual Support
Direct Support
Close Support
___________________________________
(Signature and Date)
.8
Discuss the mission of the following units: [ref. a]
a.
b.
c.
d.
e.
f.
Naval Construction Regiment (NCR)
Naval Mobile Construction Battalion (NMCB)
Underwater Construction Team (UCT)
Construction Battalion Maintenance Unit (CBMU)
Naval Facilities Engineering Command (NAVFAC)
Naval Amphibious Construction Battalion (PHIBCB) [ref. a, p. 2-17]
(Signature and Date)
.9
Discuss the following plans and orders [ref. d]
a.
b.
c.
d.
Operation Plan (OPLAN) [p. 272 / A-117]
Operation Order (OPORD) [p. 272 / A-117]
Warning Order (WARNO) [p. 397 / A-162]
Fragmentary Order (FRAGO) [p. 59 / 148]
(Signature and Date
15
103
ADMINISTRATION COMMAND AND CONTROL FUNDAMENTALS (CONT'D)
103.10
Describe the duties and responsibilities of the following staffs and departments: [ref.
b, ch. 5, pp. 5-4 thru 5-6]
a.
b.
c.
d.
e.
f.
g.
h.
Command Staff
Executive and Special Staff
S-1 Administrative
S-2 Intelligence
S-3 Operations
S-4 Supply
S-6 Communications
S-7 Training
___________________________________
(Signature and Date)
.11
Describe the duties and responsibilities of the following personnel [ref. c, ch. 1, p. 112 thru 1-16]
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
Company Commander
Company Chief
Platoon Commander
Platoon Chief
Squad Leader
Fire Team Leader
Automatic Rifleman
Rifleman 1
Rifleman 2
Grenadier
(Signature and Date)
.12
State the missions for the following NECC commands: [ref. h]
a.
b
c.
d.
e.
f.
g.
h.
i.
j.
Naval Expeditionary Combat Command
Naval Construction Force
Costal Riverine Squadrons
Explosive Ordinance Disposal
Expeditionary Diving
Expeditionary Intelligence
Expeditionary Logistics
Maritime Civil Affairs and Security Training Command
Combat Camera
Expeditionary Combat Readiness
(Signature and Date)
16
103
.13
ADMINISTRATION COMMAND AND CONTROL FUNDAMENTALS (CONT'D)
Discuss the procedures required for the following: [ref. e, ch. 9, section 9.1, 9.2, 9.4,
9.7]
a. Determine clearance eligibility
b. Grant access
c. Grant interim security clearance
d. Adjust or suspend access
(Signature and Date)
.14
Explain what the Joint Clearance and Access Verification System (JCAVS) is.
[ref. e, app. e, p. E1-2]
___________________________________
(Signature and Date)
.15
Discuss the following levels of security clearances. When does the Personnel
Security Investigation (PSI) expire for each? Explain how they apply in a tactical
environment: [ref. f, ch. 4, p. 1]
a. Top Secret (TS)
b. Secret (S)
c. Confidential (C)
___________________________________
(Signature and Date)
17
104
104
BASIC FIRST AID AND PERSONAL HYGIENE FUNDAMENTALS
References:
[a]
NAVEDTRA 14295B, Hospital Corpsman
[b]
NAVEDTRA 14234A, Seabee Combat Volume 1
[c]
COMFIRSTNCDINST 6000.3
[d]
Construction Battalion Battle Skills Guide 2, E4 – E6 Individual Skills
104.1
State the sequence to examine an injured person. [ref. b, ch.10, p. 10-1]
(Signature and Date)
.2
Explain the ABCs of basic life support. [ref. a, ch. 20, p. 20-48]
___________________________________
(Signature and Date)
.3
Describe the symptoms and treatment of: [ref. a, ch. 21, p. 93-95; ref. b, ch. 10, p. 25
thru 26]
a. Heat cramps
b. Heat exhaustion
c. Heat stroke
___________________________________
(Signature and Date)
.4
Discuss the 3-types of bleeding and the treatments [ref. b, ch. 10, pp. 18 thru 19]
a. Capillary
b. Venous
c. Arterial
(Signature and Date)
.5
Demonstrate the following and discuss the procedures: [ref. b, ch. 10, p. 2-10]
a. Adult CPR compression to ventilation ratio:
b. Adult rescue breathing ratio:
___________________________________
(Signature and Date)
.6
Describe the treatment for an Open Chest wound: [ref. a, ch. 21, pp. 44 thru 47]
(Signature and Date)
18
104
BASIC FIRST AID AND PERSONAL HYGIENE FUNDAMENTALS (CONT'D)
104.7
Describe the signs, symptoms, and treatment of shock: [ref. a, ch. 21; ref. b, ch. 10,
pp. 10-23 thru 10-26]
___________________________________
(Signature and Date)
.8
Explain the importance of personal hygiene and cite examples of how this impacts
readiness and the mission. [ref. a, ch. 9, p. 9-1; ref. b, ch. 10, pp. 10-40 thru 10-43]
___________________________________
(Signature and Date)
.9
Explain three methods of purifying water in the field. [ref. a, ch. 9, p. 9-3; ref. b, ch.
10, p. 10-43]
___________________________________
(Signature and Date)
.10
Describe and demonstrate procedures for:
a. Fractures (open and closed) [ref. a, ch. 12, p. 12-9]
b. Sprains [ref. a, ch. 21, p. 21-82]
c. Joint Dislocation
___________________________________
(Signature and Date)
.11
Describe the 4-types of burns and the treatments: [ref. a, ch. 21, pp. 87 thru 93]
a.
b.
c.
d.
First Degree
Second Degree
Third Degree
Fourth Degree
___________________________________
(Signature and Date)
.12
Explain the importance of the following: [ref. b, ch. 10, p. 10]
a. Hand washing & personal Hygiene
b. Foot Care
c. Acclimatization
(Signature and Date)
.13
Describe how to apply a compress dressing. [ref. a, ch. 20, p. 20-3]
(Signature and Date)
19
104
BASIC FIRST AID AND PERSONAL HYGIENE FUNDAMENTALS (CONT'D)
104.13
Discuss the following treatments for Environmental problems: [ref. b, ch. 10, p. 10-27]
a. Frostbite
b. Trench foot
c. Hypothermia
(Signature and Date)
.14
State the four general rules for using a stretcher: [ref. a, ch. 20 p. 20-27]
1)
2)
3)
4)
(Signature and Date)
.15
Discuss and understand the different patient-moving devices and lifting techniques
that can be used in patient rescues, Demonstrate one of these methods. [ref. a, ch.
20]
a.
b.
c.
d.
e.
f.
g.
Stokes stretcher
Army litter
Miller board
Improvised stretcher
Spine boards
Emergency rescue lines
Rescue and drag carry technique
___________________________________
(Signature and Date)
.16
Demonstrate calling in a 09-line medevac request: [ref. d, ch. 20, pp. 20-34 thru 39]
1.
2.
3.
4.
5.
6.
7.
8.
9.
___________________________________
(Signature and Date)
20
104
BASIC FIRST AID AND PERSONAL HYGIENE FUNDAMENTALS (CONT'D)
104.17
Demonstrate the proper use of a field tourniquet: [ref. a, ch. 9, pp. 19-7 thru 19-9]
___________________________________
(Signature and Date)
21
105
105
HAZARDOUS MATERIAL / HAZARDOUS WASTE ENVIRONMENTAL SAFETY
FUNDAMENTALS
References:
[a]
OPNAVINST 5100.23G, Navy Occupational Safety and Health (NAVOSH) Program
[b]
NAVEDTRA 14233A, Naval Construction Force/Seabee 1 & C
[c]
NAVEDTRA 14167F, Naval Safety Supervisor
[d]
OPNAVINST 5100.19D, Naval Occupational Safety and Health (NAVOSH)
Program Manual for Forces Afloat
[e]
COMFIRSTNCDINST 5100.2B Naval Construction Force Occupational Safety and
Health Program Manual
[f]
OPNAVINST 5090.1D CH-4, Environmental and Natural Resource Program Manual
[g]
29 CFR Part 1910, General Industry Standards
[h]
29 CFR Part 1910.1200, Hazard Communication Standards
[i]
DOD 4715.05-G, Environmental Compliance at Installations Outside the United
States
105.1
Describe the difference between Hazardous Material (HAZMAT) and Hazardous
Waste (HW). [ref. c, ch. 5, pp. 5-7 thru 5-9]
___________________________________
(Signature and Date)
.2
State the purpose and information contained on the Safety Data Sheet (SDS). [ref. b,
ch. 7, p. 7-13; ref. c, ch. 5, p. 5-8]
___________________________________
(Signature and Date)
.3
What are the six categories of HAZMAT? [ref. c, ch. 5, p. 5-7]
___________________________________
(Signature and Date)
.4
What are the general procedures to be followed when a Hazardous Material /
Hazardous Waste (HM/HW) spill occurs or is discovered? [ref. f, ch. 39, pp. 39-17
thru 39-43; ref. g, 29 CFR 1910.120]
___________________________________
(Signature and Date)
.5
State PPE required when handling HM/HW at levels A, B, C, D: [ref. g, 29 CFR
1910.120, app. b]
(Signature and Date)
.6
What are the nine different Hazard classification codes? [ref. h, sec. 173.2]
___________________________________
(Signature and Date)
22
105
HAZARDOUS MATERIAL / HAZARDOUS WASTE ENVIRONMENTAL SAFETY
FUNDAMENTALS (CONT'D)
105.7
Describe the purpose of secondary labeling of HAZMAT when unit packages
(marked packages that are part of a larger container) are removed from the shipping
container. [ref. b, ch. 7]
___________________________________
(Signature and Date)
.8
Define the following terms:
a. Hazardous Material Minimization Center (HAZMINCEN) [ref. d, ch. C23-1]
b. Consolidated Hazardous Material Reutilization and Inventory Management
Program (CHRIMP) [ref. f, ch. 3]
c. Hazardous Materials Inventory Control System (HICS) [ref. f, ch. 3]
___________________________________
(Signature and Date)
.9
Discuss the aspects of portable containment of oils spills on water. [ref. b, ch. 7]
(Signature and Date)
.10
Discuss the potential environmental impact of the following: [ref. b, ch. 7]
a.
b.
c.
d.
Oil spills
Grubbing operations
Asbestos
Polychlorinated Biphenyls (PCB)
(Signature and Date)
.11
What 7-elements are required on product labels in reference to Global
Harmonization System? [ref. h]
(Signature and Date)
.12
Discuss the purpose of the Overseas Environmental Baseline Guidance Document
(OEBGD). [ref. i]
(Signature and Date)
23
106
106
SUPPLY/LOGISTICS FUNDAMENTALS
References:
[a]
NAVEDTRA 14326, Storekeeper Basic
[b]
NAVEDTRA 14233A, Naval Construction Force/Seabee 1 & C
[c]
NAVSUP P- 485 (Rev. 3), Afloat Supply Procedures Manual, Vol. I
[d]
NAVSO P-3013-2, Financial management of Resources
[e]
OPNAVINST 5100.19D, Navy Occupational Safety and Health (NAVOSH) Program
Manual for Forces Afloat
[f]
COMSECONDNCB/COMTHIRDNCBINST 4400.3, NCF Supply Manual
[g]
NAVSUP P-485 (Rev. 3), Navy Supply procedures, Vol. II
[h]
NAVFAC P-300 Management of Civil Engineering Support Equipment
[i]
NAVSUP P-485, Naval Supply Procedures, Vol. III
[j]
Army Field Manual 4-0, (FM 4-0) Sustainment
106.1
Explain the importance of the Consolidated Shipboard / Shorebased Allowance List
(COSAL/COSBAL) in relation to the commands mission and sustainability.
[ref. f, ch. 2 pp. 2-10, 2-14]
(Signature and Date)
.2
Discuss the COSAL validation process. [ref. f, ch. 2]
(Signature and Date)
.3
What are the 11-Classes of Supply? [ref. f, fig. 3-2; ref. j, ch. 5]
___________________________________
(Signature and Date)
.4
Discuss the purpose of Material Obligation Validation (MOV) Program. [ref. I, ch. 2,
section 3/02142, p. 2-36]
___________________________________
(Signature and Date)
.5
Discuss the following: [ref. c]
a. OPTAR [ch. 9, par. 9002]
b. Departmental Budget Report (DBR) [p. 9-25, par.9120; ch. 9, par. 3]
c. Defense Logistics Agency (DLA) Distribution Services [ch. 6]
___________________________________
(Signature and Date)
24
106
SUPPLY/LOGISTICS FUNDAMENTALS (CONT'D)
106.6
State the criteria for which a requisition cancellation request is warranted. Table of
allowance [ref. c, ch. 3, par. 3565]
___________________________________
(Signature and Date)
.7
Define the following: [ref. c, ch. 5, par. 5125]
a. Plant property
b. Minor property
___________________________________
(Signature and Date)
.8
Discuss what qualifies as a controlled item. [ref. g, Section 06500 Stock Point
Operation Physical Inventory Procedures p. 6-74]
___________________________________
(Signature and Date)
.9
Discuss the purpose of the Table of Allowance (TOA). [ref. h, p. 5-5]
___________________________________
(Signature and Date)
.10
Explain the purpose of the Allowance Change Request (ACR). [ref. h, ch. 5, p. 5-3,
par. 5.2.6(A) - 9.00D]
___________________________________
(Signature and Date)
.11
Discuss the following forms:
a.
b.
c.
d.
e.
NAVSUP 1250-1/1250-2 [ref. c, ch. 3, par. 3021-3022, 3027]
DD-1348 [ref. c, ch. 3, par. 3024]
NAVSUP 1149 [ref. c, ch. 3-4, par. 3031]
DD-200 [ref. c, ch. 3, par. 3(B)]
NAVSUP 1114 [ref. f, ch. 6 par 2(A)]
___________________________________
(Signature and Date)
.12
Describe the functions of a supply department organization. [ref. c, ch. 1, par.1050]
___________________________________
(Signature and Date)
25
106
SUPPLY/LOGISTICS FUNDAMENTALS (CONT'D)
106.13
Define the acronyms and terms and state the responsibilities for the following outlets
of Supply: [ref. f]
a.
b.
c.
d.
e.
ARP
CTR
CSR
MLO
Organizational Gear and Clothing
___________________________________
(Signature and Date)
.14
Define the following abbreviations and acronyms: [ref. f, app. g]
a.
b.
c.
d.
e.
f.
g.
NSN
COG
APL
AEL
NC
NIS
SIM
___________________________________
(Signature and Date)
.15
Discuss the purpose of a Report of Deficiency (ROD) (SF-364) and the Quality
Deficiency Report (QDR) (SF-368), including the situation requiring its submission.
[ref. c, ch. 4, par. 4270, 4274]
___________________________________
(Signature and Date)
26
107
107
COMMUNICATIONS/COMMUNICATIONS SECURITY MATERIAL SYSTEMS
FUNDAMENTALS
References:
[a]
Navy Electronic Key Management System (EKMS 1E)
[b]
MCRP 3-40.3, FMFM 3-36, Radio Operators
[c]
TM 11-5820-890-10-8 Operators Manual, SINCGARS GROUND COMBAT NETRADIO, ICOM
[d]
AN/PRC -117G Operators Manual, PUB No. 10515-0319-4200
[e]
RF-310M-HH Suite B Multiband Handheld Radio Operation Manual
[f]
MCWP 6-22, Communications and Information System
[g]
NAVEDTRA 14235A, Seabee Combat Handbook, Vol. 2
107.1
Discuss Communications Security (COMSEC) and the role of the Electronic Key
Management System (EKMS) Local Element. [ref. a, ch. 4, p. 86]
___________________________________
(Signature and Date)
.2
What is meant by the term Two-Person Integrity (TPI) and how it is related to
COMSEC. [ref. a, ch. 5]
(Signature and Date)
.3
Discuss the following terms:
a.
b.
c.
d.
Controlled Cryptographic Item (CCI) [ref. a, ch. 5]
Physical Security [ref. a, annex A]
Practice Dangerous to Security (PDS) [ref. a, ch. 10]
Emergency Action Plan / Emergency Destruction Plan (EAP/EDP) [ref. a,
Annex M]
e. Data Transfer Device (DTD) [ref. a, Annex AC]
f. COMSEC Incident [ref. a, ch. 9]
(Signature and Date)
.4
Explain the three different types of “Supersessions” [ref. a, ch. 2]
a. Regular
b. Irregular
c. Emergency
(Signature and Date)
27
107
COMMUNICATIONS / ELECTRONIC KEY MANAGEMENT SYSTEM
FUNDAMENTALS (CONT'D)
107.5
Explain the function and the contents of Communications Electronic Operating
Instruction (CEOI). [ref. f, ch. 6]
(Signature and Date)
.6
Define the following terms:
a. Essential Elements of Friendly Information (EEFI) [ref. f, ch. 1 & app. o]
b. Commander’s Critical Information Requirements (CCIRs) [ref. f, ch. 1]
c. Command, Control, Communications, Computers and Intelligence (C4I)
[ref. b, ch. 3, appendix n]
d. Communications Information System Officer (CISO) [ref. f, ch. 1]
___________________________________
(Signature and Date)
.7
What is the primary tactical radio used by your unit and what man-pack is used
during infantry operations: [ref. b, ch. 2]
(Signature and Date)
.8
Discuss the function of the Single Channel Ground Air Radio System. [ref. c, ch. 1, p.
1-1]
(Signature and Date)
.9
Identify the following capabilities for the “Radio” Receiver-Transmitter (RT) AN/PRC
152 [ref. c]
a.
b.
c.
d.
e.
Characteristics
Frequency range
Configuration
Antennas
Power sources
___________________________________
(Signature and Date)
.10
Discuss the purpose of a retransmission (RETRANS) site: [ref. b, ch. 6-10; ref. c]
___________________________________
(Signature and Date)
28
107
COMMUNICATIONS / ELECTRONIC KEY MANAGEMENT SYSTEM
FUNDAMENTALS (CONT'D)
107.11
Identify the following capabilities for the “Radio” Receiver-Transmitter (RT) 1949
(AN/PRC-117G) [ref. d]
a.
b.
c.
d.
e.
Characteristics
Frequency range
Configuration
Antennas
Power sources
___________________________________
(Signature and Date)
.12
Identify the following capabilities for the RF-310M-HH Suite B Multiband Handheld
Radio: [ref. e]
a.
b.
c.
d.
e.
Characteristics
Frequency range
Configuration
Antennas
Power sources
(Signature and Date)
.13
Explain the function of the following communication assets:
a. Satellite Signals Navigation set (AN/PSN 11) [ref. c, ch. 3]
b. Simple key Loader (AN/PYQ-10) [ref. c, ch. 3]
(Signature and Date)
.14
Discuss the proper use of the phonetic alphabet, numerals, and prowords. [ref. b,
app. c, d, e]
___________________________________
(Signature and Date)
.15
Explain Line Of Sight (LOS): [ref. b, ch. 1-7; ref. c, glossary]
(Signature and Date)
.16
Discuss challenge and password. [ref. a, ch. 11]
___________________________________
(Signature and Date)
29
108
108
WEAPONS FUNDAMENTALS
References:
[a]
NAVEDTRA 14234A, Seabee Combat Handbook, Vol. 1
[b]
NAVEDTRA 14324A, Gunner’s Mate
[c]
Seabee Battle Skills Guide Vol. 1
[d]
NTRP 3-07.2.2 Weapons Handling Standard Procedures and Guidelines
[e]
Construction Battle Skills Guide, Book 1, All Hands 2005 Edition
[f]
TM-SW215-BC-MMO-010, Operator’s and Maintenance Manual for AN/PVS-12A,
Night Vision, Crew Served Weapons
[g]
FM 3-22.09, M16A1 and M16A2 Rifle Marksmanship
[h]
TM-SW215-B4-MMO-010, Operator’s and Maintenance Manual for AN/PVS-12A,
Night Vision, Individual Weapon
[i]
Construction Battalion Battle Skills Guide, Book 4, Crew/Team Skills 2005 Edition
[j]
TM 9-1010-230-10 Operators Manual Machine Gun, 40mm, MK19, MOD3
[k]
TM 9-1005-213-10 Operators Manual Machine Gun, Cal. 50; Browning M2 Heavy
Barrel
[l]
FM 3-22.68 Crew-Served Machine Guns, 5.56-MM and 7.62MM
[m]
MCTP 3-01C Machine Guns and Machine Gunnery
108.1
State the four rules of weapon safety. [ref. b, ch. 3, p. 3-3]
___________________________________
(Signature and Date)
.2
Define the four weapon conditions: [ref. a, ch. 11, p. 11-7]
a.
b.
c.
d.
Condition one
Condition two
Condition three
Condition four
___________________________________
(Signature and Date)
.3
What weapons systems are in the NCF: [ref. l, ch. 3; ref. b, ch. 3]
___________________________________
(Signature and Date)
.4
Define the following terms associated with the M16E3 and M9. [ref. a, ch. 11, P. 1115]
a. Malfunction
b. Misfire
c. Stoppage
___________________________________
(Signature and Date)
30
108
WEAPONS FUNDAMENTALS (CONT'D)
108.5
State the eight steps of operation in a firing cycle. [ref. b, ch. 3, pp. 3-4 thru 3-5]
(Signature and Date)
.6
Explain the differences between semi-automatic & automatic operation. [ref. a, ch. 3,
p. 3-5]
___________________________________
(Signature and Date)
.7
Define the following terms: [ref. a]
a.
b.
c.
d.
e.
f.
g.
h.
Trajectory [ch. 3; ch.5, pp. 5-6/13-18]
Breech [app. I, p. A1-4]
Bore [ch. 3, p. A1-4]
Chamber [app i, p. A1-5]
Muzzle [app. I, p. A1-16]
Muzzle Velocity [app. I, p. A1-17]
Maximum Range [ref. b, ch. 3, p. 3-9]
Maximum Effective Range [ref. b, ch. 3, p. 3-9]
___________________________________
(Signature and Date)
.8
Discuss small arms ammunition color codes and state the purpose of each: [ref. a; ref.
m]
a.
b.
c.
d.
e.
Orange or red [ch. 11]
Violet [ch. 11]
Black [ch. 12, p. 12-11]
Aluminum [ch. 13; ref. m, p. 3-01C]
Green [ch. 11]
___________________________________
(Signature and Date)
.9
State the magazine capacity, maximum range, maximum effective range,
employment, rates of fire, and types of ammunition of the following weapons:
a. M9 Service pistol [ref. b, ch. 3, pp. 3-9 thru 3-10]
b. M-16A3 rifle [ref. b, ch. 3, p. 3-20]
___________________________________
(Signature and Date)
31
108
WEAPONS FUNDAMENTALS (CONT'D)
108.10
Discuss loading/unloading procedures for the following weapons:
a. M9 Service pistol [ref. b, ch. 3, pp. 3-9 thru 3-10]
b. M-16A3 rifle [ref. b, ch. 3, p. 3-27]
___________________________________
(Signature and Date)
.11
Describe and discuss the following types of grenades: [ref. a, ch. 14]
a.
b.
c.
d.
Fragmentation
Illuminating
Chemical
Incendiary
e. Smoke
f. Practice/training
g. Concussion
___________________________________
(Signature and Date)
.12
Discuss hand grenade safety procedures. [ref. a, ch. 14]
___________________________________
(Signature and Date)
.13
Discuss the characteristics and purpose of the Claymore mine. [ref. a, ch. 14]
___________________________________
(Signature and Date)
The following items apply to the 7.62mm M240B machine gun:
.14
Describe the characteristics of the machine gun. [ref. a, ch. 12, p. 12-3]
___________________________________
(Signature and Date)
.15
Discuss loading/unloading procedures. [ref. a, ch. 12, pp. 12-6 thru 12-7]
___________________________________
(Signature and Date)
.16
Name the members of a gun team and state what they are responsible for carrying
into a combat situation. [ref. a, ch. 1, pp. 1-17; 1-34 thru 1-35]
___________________________________
(Signature and Date)
32
108
WEAPONS FUNDAMENTALS (CONT'D)
108.17
State the following capabilities/ nomenclature:
a.
b.
c.
d.
e.
f.
g.
Proper employment [ref. m, ch. 6]
FPL/PDF [ref. m, ch. 6]
Maximum effective range [ref. l ch. 3; NTRP 3-07.2.2, ch. 13, p. 13-3]
Safeties M240B [ref. l ch. 3; ref. a, ch. 12, p. 12-6]
Ammunition types [ref. l ch.3; ref a. ch.12, p. 12-11]
Rates of fire [ref. FM 3-22.68, ch. 3, p. 3-2]
Types of mounts [ref. A, ch.12]
(Signature and Date)
The following items apply to the 40mm machine gun (MK 19):
.18
Describe the characteristics of 40mm machine gun. [ref. j]
___________________________________
(Signature and Date)
.19
Discuss loading/unloading procedures. [ref. j]
___________________________________
(Signature and Date)
.20
State the following capabilities/nomenclature:
a.
b.
c.
d.
e.
f.
g.
h.
Proper employment [ref. m, ch. 6, sec. I]
FPL/PDF [ref. m, ch. 6, sec. I]
Arming range [ref. j]
Maximum effective range (area target) [ref. j]
Maximum effective range (point target)] [ref. j]
Rate of fire [ref. j]
Safety [ref. j]
Ammunition types [ref. j]
___________________________________
(Signature and Date)
33
108
WEAPONS FUNDAMENTALS (CONT'D)
The following items apply to the .50 caliber M2 HB machine gun:
108.21
Describe the characteristics of the M2 machine gun. [ref. k, ch. I, sec II, p. 1-5]
(Signature and Date)
.22
Discuss loading / unloading procedures. . [ref. k, ch. I, sec. II, p. 1-5]
(Signature and Date)
.23
State the following capabilities / nomenclature
a.
b.
c.
d.
e.
f.
Proper employment [ref. m, ch. 6, sec I]
FPL/PDF [ref. m, ch. 6, sec I]
Maximum range [ref. k, ch. 1, sec II, p. 1-9]
Maximum effective range [ref. k, ch. 1, sec II, p. 1-9]
Direction of feed [ref. k, ch. 1, sec II, p. 1-9]
Rates of fire [ref. k, ch. 1, sec II, p. 1-9]
___________________________________
(Signature and Date)
.24
Discuss setting headspace and timing on the .50 caliber machine gun. [ref. k, ch. 2,
sec III, p. 2-39]
(Signature and Date)
The following items apply to the 40mm M203 grenade launcher:
.25
State the following capabilities/nomenclature: [ref. i]
a.
b.
c.
d.
e.
Proper employment
Ammunition type
Maximum effective range (area target)
Maximum effective range (point target)
Maximum range
___________________________________
(Signature and Date)
.26
Describe the characteristics of the 40mm M203 grenade launcher. [ref. i]
(Signature and Date)
34
108
WEAPONS FUNDAMENTALS (CONT'D)
The following items apply to the M500 12-gauge shotgun:
108.27
Describe the characteristics of the M500 12-gauge shotgun. [ref. h, p. R3-19]
(Signature and Date)
.28
Discuss loading/unloading procedures. [ref. h, p. R3-20]
(Signature and Date)
.29
State the following capabilities/nomenclature: [ref. h, p. R3-20]
a. Length
b. Safeties
c. Ammunition type
___________________________________
(Signature and Date)
.30
Describe the use and purpose of the range card as it relates to each weapon system.
[ref. n, ref , ch. 6/Section 11/Range Cards]
___________________________________
(Signature and Date)
.31
Discuss the integration of the weapons systems into an overall defensive fire plan.
[ref m, ch. 6, ref i]
(Signature and Date)
.32
Discuss the use & purpose of the following Night Observation Devices (NOD):
[ref. b, ch. 10, p. 10.2.0]
a. AN/PVS-7C (night goggles)
b. AN/PVS-12A (M240B, M16, M14)
c. AN/PVS-20 (MK19, M2)
(Signature and Date)
35
108
WEAPONS FUNDAMENTALS (CONT'D)
108.33
Explain the various class of fire: [ref. m, ch. 6 ]
a.
b.
c.
d.
e.
f.
g.
h.
i.
Grazing
Plunging
Overhead
Fixed
Traversing
Searching
Combined searching and traversing
Swinging traverse
Free
(Signature and Date)
36
109
109
GENERAL MILITARY TACTICS FUNDAMENTALS
References:
[a]
NAVEDTRA 14234A, Seabee Combat Handbook, Vol. 1
[b]
NAVEDTRA 14235A, Seabee Combat Handbook, Vol. 2
[c]
Blue Jackets’ Manual, 23rd Edition
[d]
Convoy Operations Hand Book MCRP 4-11.3H
[e]
Construction Battalion Battle Skills Guide, Book 1
[f]
Construction Battalion Battle Skills Guide, Book 2
[g]
Construction Battalion Battle Skills Guide, Book 3
[h]
NTTP 3-07.2.1 (Rev A) Antiterrorism Force Protection
109.1
Describe the key components of a standard battle load. [ref. a, ch. 2, p. 4]
(Signature and Date)
.2
Describe the construction and the elements of the following dug-in emplacements:
[ref. a, ch. 7, p. 4-6]
a. A hasty/skirmisher’s position
b. An improved one-man fighting position
c. An improved two-man fighting position
___________________________________
(Signature and Date)
.3
Explain the characteristics of the following: [ref. a, ch., 8; p. 8-11]
a. Camouflage
b. Cover
c. Concealment
(Signature and Date)
.4
State what actions should be taken if you are caught in the light of a ground flare
and overhead flare? [ref. a, ch. 4, p. 7]
___________________________________
(Signature and Date)
.5
State the eleven general orders of a sentry and the importance while standing
CP/COC watch. [ref. c, ch. 7]
___________________________________
(Signature and Date)
37
109
GENERAL MILITARY TACTICS FUNDAMENTALS (CONT'D)
109.6
Discuss the military aspects of terrain as it applies to a defensive force using the
acronym KOCOA. [ref. a,. ch. 5, p. 5-3]
___________________________________
(Signature and Date)
.7
Discuss the use and care of the following [ref. a, ch. 5]
a. Topographic map
b. Lensatic compass
___________________________________
(Signature and Date)
.8
State the five basic colors used & how they are applied to a military map.
[ref. a, ch. 5]
___________________________________
(Signature and Date)
.9
Describe the Military Grid System: [ref. a, ch. 5]
___________________________________
(Signature and Date)
.10
Explain resection and intersection. [ref. a, ch. 5]
___________________________________
(Signature and Date)
.11
State the twelve patrol planning and preparation steps: [ref. a, ch. 4]
___________________________________
(Signature and Date)
.12
Utilizing the acronym BAMCIS, describe the planning process for issuing a fiveparagraph order. [ref. f, Task 2-3]
___________________________________
(Signature and Date)
.13
Describe the purpose of the following: [ref. a, ch. 4]
a. Security patrol
b. Reconnaissance patrol
(Signature and Date)
38
109
GENERAL MILITARY TACTICS FUNDAMENTALS (CONT'D)
109.14
Discuss the five-paragraph order. [ref. a, ch. 11, p. 11-36]
a.
b.
c.
d.
e.
Situation
Mission
Execution
Admin and Logistics
Command and Signal
(Signature and Date)
.15
Define and discuss the difference between the following reports: [ref. b, ch. 2, p. 2-5]
a. SALUTE
b. SPOT
(Signature and Date)
.16
Discuss the acronym SAFE as it applies to occupation of the defense. [ref. b, ch. 4]
(Signature and Date)
.17
Discuss the use of the range card and the information it contains? [ref. b, ch. 4, p. 46]
(Signature and Date)
.18
Define and discuss how your unit would utilize the following:
a. Call for fire for indirect weapon support [ref. a, ch. 4, p. 4-16 thru 4-20]
b. Close Air Support [ref. d, p. 150]
c. Fire commands for direct weapon support utilizing the acronym ADDRAC
[ref. a, ch. 3]
(Signature and Date)
.19
Discuss the elements of a fire plan. [ref. b, ch 4]
(Signature and Date)
.20
Discuss sectors of fire and fire discipline. [ref. b, ch. 4]
___________________________________
(Signature and Date)
39
109
GENERAL MILITARY TACTICS FUNDAMENTALS (CONT'D)
109.21
State the 6 articles of the code of conduct [ref. c, ch. 4]
___________________________________
(Signature and Date)
.22
Describe the procedures for handling detainees/Enemy Prisoner of War (EPW). [ref.
a, ch. 1, pp. 1-46 thru 1-47; ref. e, p. 1-147 thru 1-154]
___________________________________
(Signature and Date)
.23
Describe force protection conditions and threat levels. [ref. h, ch. 17]
(Signature and Date)
.24
Define rules of engagement and discuss the importance of understanding the
particular ROE’s for the theater you are operating in. [[ref. b, AI-20]
___________________________________
(Signature and Date)
.25
Describe the circumstances when deadly force would normally be authorized using
the deadly force triangle. [ref. h, ch. 7, p. 7-2 thru 7-4]
(Signature and Date)
.26
Describe the three classes of wire entanglement, and how they are used.
[ref. a, ch. 8]
a. Protective
b. Tactical
c. Supplementary
(Signature and Date)
.27
State the purpose of the following. [ref. a, ch. 8]
a. Triple-standard concertina fence
b. Double-apron fence
c. Low wire entanglement
(Signature and Date)
40
109
.28
GENERAL MILITARY TACTICS FUNDAMENTALS (CONT'D)
Discuss the following actions when isolated in an enemy area: [ref. a, ch. 6]
a. Evasion
b. Survival
c. Escape
___________________________________
(Signature and Date)
.29
Discuss the different combat maneuvers, formation and ambush procedures for
patrolling. [ref. a, ch. 4]
___________________________________
(Signature and Date)
.30
Describe immediate actions for enemy contact during convoy operations.
___________________________________
(Signature and Date)
.31
Describe the procedures to establish a LZ. [ref. b, ch. 3]
(Signature and Date)
.32
What information is contained in nine-line medical evacuation request?
[ref. b, ch. 3, pp. 3-9]
(Signature and Date)
.33
Discuss the purpose of combat hand and arm signals in the field. [ref. a, ch.11, p. 1131]
(Signature and Date)
.34
Describe what is on the Convoy Commander’s checklist. [ref. d, app. a]
(Signature and Date)
.35
Explain what considerations you should have when considering a convoy route
[ref. d, pp. 11-12]
(Signature and Date)
41
109
109.36
GENERAL MILITARY TACTICS FUNDAMENTALS (CONT'D)
What factors determine the speed at which a convoy will move? [ref. d, ch. 2, pp. 2-1
thru 2-2]
(Signature and Date)
.37
Discuss the effectiveness and employment of early warning devices and
pyrotechnics. [ref. a, ch. 12, pp. 12 thru 15]
(Signature and Date)
42
110
110
CONTINGENCY OPERATIONS FUNDAMENTALS
References:
[a]
https://abfcview.navfac.navy.mil
[b]
http://tcms.net/
[c]
NAVEDTRA 14265A, Utilitiesman Basic, Vol. 1
[d]
NAVEDTRA 14259A, Utilitiesman Advanced
[e]
NAVEDTRA 14233A, Naval Construction Force/Seabee 1 & C
[f]
NAVEDTRA 14234A, Seabee Combat Handbook, Volume 1
[g]
NWP 4-04, Naval Civil Engineer Operations
[h]
JFOB, Joint Forward Operating Base Force Protection Handbook
[i]
JP 3-34 (Jan 16), Joint Engineer Operations
110.1
Discuss Engineer Support Plans (ESP). [ref. g, ch. 4, p. 4-1, par. 4.2]
(Signature and Date)
.2
Discuss the Request for Forces (RFF) process. [ref. g, ch. 4, p. 4-1, par. 4.3]
___________________________________
(Signature and Date)
.3
Discuss the difference between Contingency planning and Crisis Action planning.
[ref. g, ch. 4, p.4-1, par 4.7.1 and 4.7.2]
(Signature and Date)
.4
Discuss the following as it relates to General Engineering planning tools and
considerations. [ref. g, ch. 4, p. 4-6]
a.
b.
c.
d.
e.
f.
ESP [par. 4.9.1]
ABFC [par. 4.9.3]
Facilities [par. 4.9.4]
Real Estate [par. 4.9.5]
Environment [par. 4.9.6]
HN Support [par. 4.9.7]
___________________________________
(Signature and Date)
.5
Explain the three types of engineering Battlespace Functions that are assigned to the
Seabees: [ref. g, ch. 5, p. 5-2, par. 5.3]
___________________________________
(Signature and Date)
43
110
CONTINGENCY OPERATIONS FUNDAMENTALS (CONT’D)
110.6
Discuss the following logistics support considerations for Seabee units. [ref. g, ch. 4,
p. 4-11]
a.
b.
c.
d.
e.
f.
g.
h.
Supply [par. 4.11.1]
Maintenance [par. 4.11.2]
Transportation [par. 4.11.3]
General Engineering [par. 4.11.4]
Health Services [par. 4.11.5]
Medical Treatment Facilities [par. 4.11.5.1]
Medical Evacuations [par. 4.11.5.2]
Other Services [par. 4.11.6]
___________________________________
(Signature and Date)
.7
Explain the following construction standards. [ref. g, ch. 5, p. 5-1]
a. Initial/Expedient [par. 5.2.1]
b. Temporary [par. 5.2.2.1]
c. Permanent [par. 5.2.3.1]
___________________________________
(Signature and Date)
.8
Discuss the following operational situations. [ref. g, ch. 5, p. 5-8]
a.
b.
c.
d.
e.
f.
g.
h.
i.
Joint [par. 5.5.1]
Maritime Prepositioning Force (MPF) [par. 5.5.2]
Counteracting Restriction to Movement [par. 5.5.4]
Jungle [par. 5.5.3]
Mountain [par. 5.5.5]
Cold Weather [par. 5.5.6]
Desert [par. 5.5.7]
Gap Crossing [par. 5.5.8]
Military Operations in Urban Terrain (MOUT) [par. 5.5.9]
(Signature and Date)
.9
Discuss the following Joint Forward Operating Base (JFOB) site selection and layout
considerations. [ref. h, ch. 5]
a.
b.
c.
d.
e.
f.
General [p. 5-6]
Perimeter Security [p. 5-7]
Critical Assets [p. 5-8]
Utilities [p. 5-9]
Occupied Structures [p. 5-10]
Commercial/Service Access [p. 5-10]
___________________________________
(Signature and Date)
44
110
CONTINGENCY OPERATIONS FUNDAMENTALS (CONT’D)
110.10
Explain the fundamentals of a tent camp layout in relation to the following: [ref. f, ch.
10]
a.
b.
c.
d.
Latrines from messing facilities [p. 10- 39]
Latrines from water supplies [p. 10-39]
Garbage pits from water supplies [p. 10-39]
Garbage pits from messing [p. 10-41]
(Signature and Date)
.11
Discuss the purpose of leach fields. [ref. d, ch. 6, p. 6-40, par. 6.3.0]
___________________________________
(Signature and Date)
.12
Discuss the following as it pertains to camp maintenance: [ref. e, ch. 6]
a.
b.
c.
d.
e.
Trouble desk [p. 6-9]
Three types of work [p. 6-14]
Operator inspection [p. 6-31]
Control inspections [p. 6-30]
Maintenance inspection [p. 6-27]
___________________________________
(Signature and Date)
.13
Discuss the following: [ref. c]
a. Potable water [ch. 3, p. 3-6]
b. Chlorination [ch. 8, p. 8-45]
c. Superchlorination [ch. 8, pp. 8-42 thru 8-45]
___________________________________
(Signature and Date)
.14
Discuss the three parts of the Advance Base Functional Component (ABFC) system
and explain their relationships: [ref. e, ch. 4]
___________________________________
(Signature and Date)
.15
Describe the ABFC View and Theater Construction Management System (TCMS)
Programs and how they facilitate contingency planning [ref. a, ref. b]
(Signature and Date)
45
110
CONTINGENCY OPERATIONS FUNDAMENTALS (CONT’D)
110.16
Discuss the different units and capabilities of the following Army engineering
categories: [ref. i, ch. 1, pp. I-2 thru I-3; app, A, pp. A-A-4 thru A-A-5]
a.
b.
c.
d.
Combat Engineer [ch. 1, pp. I-2 thru I-3]
General Engineer ( pp. A-A-4 thru A-A-5]
USACE [pp. A-A-6 thru A-A-7]
Specialized [p. A-A-5]
(Signature and Date)
.17
Discuss the different capabilities of the following Air Force engineering units: [ref. i,
pp. A-C-1/A-C-4]
a. Red horse [ref. A-C-1 – A-C-2]
b. Prime Beef [ref. A-C-2 – A-C-3]
c. Specialized [ref. A-C-3 – A-C-4)
(Signature and Date)
.18
Discuss the different capabilities of the following Marine Corps engineering units:
[ref. i]
a. ESB [A-D-3]
b. MWSS [A-D-2]
c. CEB [A-D-2]
(Signature and Date)
46
111
111
CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL (CBR) WARFARE
FUNDAMENTALS
References:
[a]
NWP 3-11 Multiservice Doctrine for CBRN Operations
[b]
NTTP 3-11.27 Multiservice Tactics Techniques and Procedures for NBC Protection
[c]
TM S6470-AD-OMP-010 Chemical Biological Mask Type M50
[d]
TM SS200-AP-MMO-010 Operator manual for Joint Service Lightweight Integrated
Suit Technology (JSLIST) Chemical Protective Ensemble
[e]
NAVEDTRA 14234A Seabee Combat Handbook Vol. 1
[f]
NAVEDTRA 14235A Seabee Combat Handbook Vol. 2
[g]
NAVMED P-5041 Treatment of Chemical Agent Casualties and Conventional Military
Chemical Injuries
111.1
Explain the following: [ref. a, ch. 1]
a. Chemical hazards [p. 1-7]
b. Biological hazards [p. 1-9]
c. Radiological hazards [p. 1-9)
___________________________________
(Signature and Date)
.2
Discuss the following CBRN Defense Operations [ref. a, ch. 4, p. 4-6]
a. Active defense
b. Passive defense
___________________________________
(Signature and Date)
.3
What are the three passive defense principles? [ref. a, ch. 4, p. 4-7]
(Signature and Date)
.4
Discuss the following pre-attack, during and post attack options for the following: [ref.
b, ch. 2]
a.
b.
c.
d.
e.
Common actions [p. 2-1]
Nuclear actions [p. 2-7]
Biological actions [p. 2-15]
Chemical actions [p. 2-19]
Toxic industrial material actions [p. 2-28]
___________________________________
(Signature and Date)
47
111
CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL (CBR) WARFARE
FUNDAMENTALS (CONT’D)
111.5
Describe the operation and maintenance of the protective mask. [ref. c]
a. Operation
b. Maintenance
___________________________________
(Signature and Date)
.6
Define Mission Oriented Protective Posture (MOPP) & discuss the levels. [ref. b, ch.
6]
___________________________________
(Signature and Date)
.7
Describe the correct procedures for inspecting and maintaining the JSLIST chemical
protective ensemble. [ref. d, ch. 2, pp. 2-1 thru 2-11]
(Signature and Date)
.8
Describe the colors and markings on the NATO CBR marker sign. [ref. e, ch. 9, p. 93]
___________________________________
(Signature and Date)
.9
Describe the color that the M-9 chemical agent detector tape displays after it comes
in contact with a liquid nerve or blister agent. [ref. e, ch. 9, p. 9-10]
___________________________________
(Signature and Date)
.10
Describe the color that M-8 paper turns after it comes in contact with a liquid nerve or
blister agent. [ref. e, ch. 9, p. 9-10]
(Signature and Date)
.11
Explain the following as it applies to nerve agents. [ref. g]
a. Symptoms [ch. 2, p. 2-11]
b. Contents of the NAAK MK1 [appendix e, p. e-1]
c. Treatment (self and buddy aid) [appendix e, p. e-4]
(Signature and Date)
48
111
CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL (CBR) WARFARE
FUNDAMENTALS (CONT’D)
111.12
Describe the steps and procedures in utilizing the M-295 and M-291 decontamination
kits. [ref. e, ch. 4, p. 9-26]
___________________________________
(Signature and Date)
.13
State how long the JSLIST protective suit will provide protection from chemical
agents once they are removed from packaging under the following conditions. [ref. e,
p. 9-22]
a. Exposed to chemical agents
b. Not exposed to chemical agents
___________________________________
(Signature and Date)
.14
Discuss laundering procedures for the JSLIST protective suit. [ref. d, ch. 3, p. 3-4]
(Signature and Date)
.15
Discuss the following types of decontamination. [ref. f, ch. 5, p. 5-10]
a. Immediate
b. Operational
c. Thorough
(Signature and Date)
49
112
112
EMBARKATION FUNDAMENTALS
References:
[a]
NAVEDTRA 14233A, Naval Construction Force/Seabee 1 & C
[b]
AMCAW 36-101, Vol. I, AMC Affiliations Program Equipment Preparation Course
[c]
AMCAW 36-101, Vol. II, AMC Affiliations Program Airlift Planner’s Course
[d]
NAVFAC P-1051, Container Operations Manual for the NCF
[e]
NTTP 4-0.15 Strategic and Unit Movement Operations (JUL 2008)
[f]
P-1049, Naval Construction Force Mobilization Manual
[g]
NWP 4-04.1, Seabee Operations in the MAGTF
[h]
OPNAVINST 4600.26, TCAIMS II
112.1
Define the following as applied to embarkation: [ref. c, glossary, ch. A-3, p. A-3-1]
a.
b.
c.
d.
e.
ACL
TALCE
Marshalling
AACG
DACG
(Signature and Date)
.2
Describe the following as it pertains to how equipment and cargo are to be prepared
for air and sea movement.
a.
b.
c.
d.
Palletization [ref. b, ch. 2, p. 2-1]
Weighing and Marking [ref. b, ch. 8, p. 8-1]
Shoring [ref. b, ch. 4, p. 4-1]
Joint Inspections [ref. b, ch. 5, p. 5-1]
___________________________________
(Signature and Date)
.3
State the primary use and mission of the following three types of Air Mobility
Command (AMC) organic aircraft
a. C-130 [ref. c, ch. 3, p 3-1]
b. C-5A [ref. c, ch. 4, p. 4-1]
c. C-17 [ref. c, ch. 5, p 5-1]
___________________________________
(Signature and Date)
.4
Discuss the information found on a Time-Phased Force Deployment Data (TPFDD).
[ref. f, appendix a, p. a-13]
___________________________________
(Signature and Date)
50
112
EMBARKATION FUNDAMENTALS (CONT'D)
112.5
Describe the different types of cargo containers that may be used for unit
movements. [ref. d, ch. 2, p. 2-1]
___________________________________
(Signature and Date)
.6
Discuss the Maritime Prepositioning Force (MPF) process. [ref. e, p 7-6]
___________________________________
(Signature and Date)
.7
Describe the purpose of shipper declaration for dangerous goods. [ref. b, ch. 5, p. 55]
(Signature and Date)
.8
Describe the purpose of TCAIMS II. [ref. h]
___________________________________
(Signature and Date)
.9
Discuss the purpose and procedures of the Mount-Out Control Center (MOCC). [ref.
a, ch. 4]
___________________________________
(Signature and Date)
51
113
113
CIVIL ENGINEER SUPPORT EQUIPMENT (CESE) FUNDAMENTALS
References:
[a]
NAVFAC P-300, Management of Civil Engineering Support Equipment
[b]
COMFIRSTNCDINST 11200.2, Naval Construction Force Equipment Management
113.1
Discuss the following Civil Engineer Support Equipment (CESE). [ref. a]
a.
b.
c.
d.
e.
Automotive Equipment [app. a, p. a-1]
Construction Equipment [app. a, p. a-2]
Materials Handling Equipment (MHE) [app. a, p. a-3]
Weight Handling Equipment (WHE) [app. a, p. a-5]
Civil Engineering End Item (CEEI) [ch. 2, section 2.10, p. 2-29, par. a]
___________________________________
(Signature and Date)
.2
Explain the importance of the first echelon maintenance. [ref. b, ch. 2, section 1, p. 26, par. d, 1b]
(Signature and Date)
.3
Discuss the process for completing the following: [ref. b, ch. 2]
a. Operating checks [section 2, 2201, par. c, p. 2-10]
b. Operator inspection guide trouble report [section 3, 2305, par. a, p. 2-22]
c. Motor vehicle utilization record [section 3, 2302, p. 2-15]
(Signature and Date)
.4
Describe the differences and uses of the following: [ref. b, ch. 3]
a. Organizational maintenance [section 2, par. b, p. 3-6]
1) Operator maintenance (First echelon) [section 2, par. b, p. 3-6]
2) Planned maintenance (Preventative) [section 2, par. b, p. 3-6]
b. Corrective maintenance [section 2, par. c, p. 3-6]
c. Depot maintenance [section 2, par. d, p. 3-7]
___________________________________
(Signature and Date)
.5
Describe the contents of a “Mishap Crash” package: [ref. b, ch. 2, section 3, 2301,
par. b8, p. 2-14]
___________________________________
(Signature and Date)
52
113
CIVIL ENGINEER SUPPORT EQUIPMENT (CESE) FUNDAMENTALS
(CONT'D)
113.6
Discuss your unit’s requirement for government licenses. [ref. a, ch. 3, p. 3-16 par.
3.8.1 a thru c; ref. b, ch. 2, sec. 5, p. 2-34 thru 2-41]
(Signature and Date)
.7
Discuss issuing, stowing and types of Collateral Equipage. [ref. b, ch. 2, section 2402
thru 2404, p. 2-25 thru 2-29]
___________________________________
(Signature and Date)
.8
Discuss the responsibilities of the following CESE management positions.
[ref. b, ch. 1]
a. Alfa Company Commander - A6. [p. 1-1]
b. Alfa Company Maintenance Supervisor - A4. [p. 1-4]
c. Alfa Company Operations Supervisor - A3. [p. 1-2]
___________________________________
(Signature and Date)
.9
Describe the difference between Class A, B and C assigned vehicles. [ref. b, ch. 2, p.
2-4]
___________________________________
(Signature and Date)
53
300
INTRODUCTION TO WATCHSTATIONS
300.1
INTRODUCTION
The Watchstation section of your PQS is where you get a chance to demonstrate to
your Qualifier that you can put the knowledge you have gained in the previous
sections to use. It allows you to practice the tasks required for your watchstation and
to handle abnormal conditions and emergencies. Before starting your assigned
tasks, you must complete the prerequisites that pertain to the performance of that
particular task. Satisfactory completion of all prerequisites is required prior to
achievement of final watchstation qualification.
300.2
FORMAT
Each watchstation in this section contains:

A FINAL QUALIFICATION PAGE, which is used to obtain the required signatures
for approval and recording of Final Qualification.

PREREQUISITES, which are items that must be certified completed before you
can begin qualification for a particular watchstation. Prerequisites may include
schools, watchstation qualifications from other PQS books, and fundamentals,
systems/mission areas, or watchstation qualifications from this book. Prior to
signing off each prerequisite line item, the Qualifier must verify completion from
existing records. Record the date of actual completion, not the sign-off date.

WATCHSTATION Performance, which is the practical factors portion of your
qualification. The performance is broken down as follows:
Tasks (routine operating tasks that are performed frequently)
Infrequent Tasks
Abnormal Conditions
Emergencies
Training Watches
If there are multiple watchstations, a QUALIFICATION PROGRESS SUMMARY will
appear at the end of the Standard.
54
300
INTRODUCTION TO WATCHSTATIONS (CONT’D)
300.3
OPERATING PROCEDURES
The PQS deliberately makes no attempt to specify the procedures to be used to
complete a task or control or correct a casualty. The only proper sources of this
information are the technical manuals, Engineering Operational Sequencing System
(EOSS), Naval Air Training and Operating Procedures Standardization (NATOPS)
or other policy-making documents prepared for a specific installation or a piece of
equipment. Additionally, the level of accuracy required of a trainee may vary from
school to school, ship to ship, and squadron to squadron based upon such factors
as mission requirements. Thus, proficiency may be confirmed only through
demonstrated performance at a level of competency sufficient to satisfy the
Commanding Officer.
300.4
DISCUSSION ITEMS
Though actual performance of evolutions is always preferable to observation or
discussion, some items listed in each watchstation may be too hazardous or time
consuming to perform or simulate. Therefore, you may be required to discuss such
items with your Qualifier.
300.5
NUMBERING
Each Final Qualification is assigned both a watchstation number and a NAVEDTRA
Final Qualification number. The NAVEDTRA number is to be used for recording
qualifications in service and training records.
300.6
HOW TO COMPLETE
After completing the required prerequisites applicable to a particular task, you may
perform the task under the supervision of a qualified watchstander. If you
satisfactorily perform the task and can explain each step, your Qualifier will sign you
off for that task. You may then be required to stand a watch or a number of watches
to earn qualification. There are two levels of supervision for this:

Under Instruction: You will perform the duties and tasks of the watchstation
under the direct supervision of a qualified watchstander or supervisor. This is
intended to be a one-on-one training situation.

Under qualified supervision: You will perform the duties and tasks of the
watchstation with minor guidance from a qualified watchstander or supervisor.
This is intended to allow you to develop proficiency in and operational
environment with minimal oversight or have a supervisor close at hand if
needed.
After all line items have been completed, your Qualifier will verify Final Qualification
by signing and dating the Final Qualification pages.
55
FINAL
QUALIFICATION
301 SEABEE COMBAT WARFARE (SCW), COMMON CORE
NAME/RATE/RANK___________________________________________________________
This page is to be used as a record of satisfactory completion of designated sections of the
Personnel Qualification Standard (PQS). Only specified supervisors may signify completion of
applicable sections either by written or oral examination, or by observation of performance. The
examination or checkout need not cover every item; however, a sufficient number should be
covered to demonstrate the examinee’s knowledge. Should supervisors give away their
signatures, unnecessary difficulties can be expected in future routine operations.
This qualification section is to be kept in the individual’s training jacket.
The trainee has completed all PQS requirements for this watchstation. Recommend designation
as a qualified SEABEE COMBAT WARFARE (SCW), COMMON CORE (NAVEDTRA 43904-E).
RECOMMENDED
DATE
Supervisor
RECOMMENDED
DATE
Division Officer
RECOMMENDED
DATE
Department Head
QUALIFIED
DATE
Commanding Officer or Designated Representative
SERVICE RECORD ENTRY
DATE
56
WATCHSTATION 301
301
SEABEE COMBAT WARFARE (SCW), COMMON CORE
Estimated completion time: 6 months
301.1
PREREQUISITES
FOR OPTIMUM TRAINING EFFECTIVENESS, THE FOLLOWING ITEMS SHOULD BE COMPLETED
PRIOR TO STARTING YOUR ASSIGNED TASKS BUT SHALL BE COMPLETED PRIOR TO FINAL
WATCHSTATION QUALIFICATION.
305
All Hands – Complete NAVEDTRA 43462-1A EKMS User (Lite) Electronic
Key Management System (EKMS)
Completed
301.1.1
(Qualifier and Date)
CORRESPONDENCE COURSES:
NAVEDTRA 14234A, Seabee Combat Handbook, Vol. 1
Completed
(Qualifier and Date)
NAVEDTRA 14235A, Seabee Combat Handbook, Vol. 2
Completed
(Qualifier and Date)
NAVEDTRA 14233A, Naval Construction Force/Seabee 1 & C
Completed
(Qualifier and Date)
NAVEDTRA 14167F, Naval Safety Supervisor
Completed
.2
(Qualifier and Date)
CERTIFICATION:
Basic Life Support-CPR Certification (Recommended)
Completed
.3
(Qualifier and Date)
Maintenance, Material and Management (3M) NAVEDTRA 43241-J
301
All Hands - Maintenance Person
Completed
(Qualifier and Date)
57
301
SEABEE COMBAT WARFARE (SCW), COMMON CORE (CONT'D)
301.1.4
FUNDAMENTALS FROM THIS PQS:
101
General Safety Fundamentals
Completed
7% of Watchstation
(Qualifier and Date)
102
Naval Heritage and Doctrine Fundamentals
Completed
6% of Watchstation
(Qualifier and Date)
103
Administrative/Command and Control Fundamentals
Completed
6% of Watchstation
(Qualifier and Date)
104
Basic First Aid and Personal Hygiene Fundamentals
Completed
9% of Watchstation
(Qualifier and Date)
105
Hazardous Material/Hazardous Waste (HM/HW) Environmental Safety
Fundamentals
Completed
6% of Watchstation
(Qualifier and Date)
106
Supply/Logistics Fundamentals
Completed
7% of Watchstation
(Qualifier and Date)
107
Communications/Communications Security Material Systems Fundamentals
Completed
7% of Watchstation
(Qualifier and Date)
108
Weapons Fundamentals
Completed
12% of Watchstation
(Qualifier and Date)
109
General Military Tactics Fundamentals
Completed
12% of Watchstation
(Qualifier and Date)
58
301
SEABEE COMBAT WARFARE (SCW), COMMON CORE (CONT’D)
301.1.4
FUNDAMENTALS FROM THIS PQS: (cont’d)
110
Contingency Operations Fundamentals
Completed
9% of Watchstation
(Qualifier and Date)
111
Chemical, Biological, and Radiological (CBR) Warfare Fundamentals
Completed
7% of Watchstation
(Qualifier and Date)
112
Embarkation Fundamentals
Completed
6% of Watchstation
(Qualifier and Date)
113
Civil Engineer Support Equipment (CESE) Fundamentals
Completed _____________________________6% of Watchstation
(Qualifier and Date)
301.2
TASKS - None.
301.3
INFREQUENT TASKS- None.
301.4
ABNORMAL CONDITIONS- None to be observed.
301.5
EMERGENCIES- None to be discussed.
301. 6
WATCHES- None.
301.7
EXAMINATIONS
301.7.1
Examination conducted at the unit level. Oral and written testing of the material
contained in this Common Core PQS Manual will occur in conjunction with the
testing required in a SCW Unit/Type Specific PQS Manual associated with this PQS
series.
59
NAVEDTRA 43904-E
QUALIFICATION PROGRESS SUMMARY FOR
SEABEE COMBAT WARFARE (SCW), COMMON CORE
NAME
RATE/RANK
This qualification progress summary is used to track the progress of a trainee in the
watchstations for this PQS and ensure awareness of remaining tasks. It should be kept by the
individual or in the individual's training jacket and updated with an appropriate signature
(Training Petty Officer, Division Officer, Senior Watch Officer, etc.) as watchstations are
completed.
101
General Safety Fundamentals
Completed
Date
(Signature)
102
Navy Heritage and Doctrine Fundamentals
Completed
Date
(Signature)
103
Administrative Command and Control Fundamentals
Completed
Date
(Signature)
104
Basic First Aid and Personal Hygiene Fundamentals
Completed
Date
(Signature)
105
Hazardous Material / Hazardous Waste Environmental Safety Fundamentals
Completed
Date
(Signature)
106
Supply / Logistics Fundamentals
Completed
Date
(Signature)
60
QUALIFICATION PROGRESS SUMMARY FOR
SEABEE COMBAT WARFARE (SCW), COMMON CORE (CONT’D)
107
Communications Security Material Systems Fundamentals
Completed
Date
(Signature)
108
Weapons Fundamentals
Completed
Date
(Signature)
109
General Military Tactics Fundamentals
Completed
Date
(Signature)
110
Contingency Operations Fundamentals
Completed
Date
(Signature)
111
Chemical, Biological, and Radiological (CBR) Warfare Fundamentals
Completed
Date
(Signature)
112
Embarkation Fundamentals
Completed
Date
(Signature)
113
Civil Engineer Support Equipment (CESE) Fundamentals
Completed
Date
(Signature)
301
SEABEE COMBAT WARFARE (SCW), COMMON CORE
Completed
Date
(Signature)
61
LIST OF REFERENCES USED IN THIS PQS
29 CFR Part 1910, General Industry Standards
29 CFR Part 1910.1200, Hazard Communication Standards
AMCAW 36-101, Vol. I, AMC Affiliations Program Equipment Preparation Course
AMCAW 36-101, Vol. II, AMC Affiliations Program Airlift Planner’s Course
AN/PRC -117G Operators Manual, PUB No. 10515-0319-4200
Army Field Manual 4-0, (FM 4-0) Sustainment Barrel
Blue Jackets’ Manual, 23rd Edition
COMFIRSTNCDINST 11200.2, Naval Construction Force Equipment Management
COMFIRSTNCDINST 5100.2B Naval Construction Force Occupational Safety and
Health Program Manual
COMFIRSTNCDINST 6000.3
COMSECONDNCB/COMTHIRDNCBINST 4400.3, NCF Supply Manual
Construction Battalion Battle Skills Guide, Book 1
Construction Battalion Battle Skills Guide, Book 2
Construction Battalion Battle Skills Guide, Book 3
Construction Battalion Battle Skills Guide, Book 4
DOD 4715.05-G, Environmental Compliance at Installations Outside the United
States
FM 3-22.09, M16A1 and M16A2 Rifle Marksmanship
FM 3-22.68, Crew-Served Machine Guns, 5.56-MM and 7.62MM
http//www.necc.navy.mil
http://tcms.net/
http://www.arlingtoncemetery.net/rdstethe.htm
https://abfcview.navfac.navy.mil
JFOB, Joint Forward Operating Base Force Protection Handbook
JP 1-02, DOD Dictionary
JP 3-34 (Jan 16), Joint Engineer Operations Manual for Forces Afloat
MCRP 3-40.3, FMFM 3-36, Radio Operators
MCRP 4-11.3H, Convoy Operations Hand Book
MCTP 3-01C, Machine Guns and Machine Gunnery
MCWP 6-22, Communications and Information System
Naval Doctrine Publication 1, Warfare
Naval Doctrine Publication 5, Planning
NAVEDTRA 14167F, Naval Safety Supervisor
NAVEDTRA 14233A, Naval Construction Force/Seabee 1 & C
NAVEDTRA 14234A, Seabee Combat Handbook, Vol. 1
NAVEDTRA 14235A Seabee Combat Handbook Vol. 2
NAVEDTRA 14259A, Utilitiesman Advanced
NAVEDTRA 14265A, Utilitiesman Basic, Vol. 1
NAVEDTRA 14295B, Hospital Corpsman
NAVEDTRA 14324A, Gunner’s Mate
NAVEDTRA 14326, Storekeeper Basic
NAVFAC P-1051, Container Operations Manual for the NCF
NAVFAC P-1105, Seabee Skills Assessment Manual
NAVFAC P-300, Management of Civil Engineering Support Equipment
NAVMED P-5041 Treatment of Chemical Agent Casualties and Conventional Military
Chemical Injuries
62
LIST OF REFERENCES USED IN THIS PQS (CONT’D)
NAVSO P-3013-2, Financial management of Resources
NAVSUP P- 485 (Rev. 3), Afloat Supply Procedures Manual, Vol. I
NAVSUP P-485 (Rev. 3), Navy Supply procedures, Vol. II
NAVSUP P-485, Naval Supply Procedures, Vol. III
Navy Electronic Key Management System (EKMS 1E)
NRTP 4-04.2.5, Construction Management
NTRP 3-07.2.2 Weapons Handling Standard Procedures and Guidelines
NTRP 4-04.2.1, Doctrinal Reference for Naval Construction Forces
NTTP 3-07.2.1 (Rev A) Antiterrorism Force Protection
NTTP 3-11.27 Multiservice Tactics Techniques and Procedures for NBC Protection
NTTP 4-0.15 Strategic and Unit Movement Operations (JUL 2008)
NWP 3-11 Multiservice Doctrine for CBRN Operations
NWP 4-04, Naval Civil Engineer Operations
NWP 4-04.1, Seabee Operations in the MAGTF
OPNAVINST 3500.39C, Operational Risk Management
OPNAVINST 4600.26, TCAIMS II
OPNAVINST 5090.1D CH-4, Environmental and Natural Resource Program Manual
OPNAVINST 5100.19D, Navy Occupational Safety and Health (NAVOSH) Program
OPNAVINST 5100.23G, Navy Occupational Safety and Health (NAVOSH) Manual
OPNAVINST 5102.1D, Navy and Marine Corps Mishap and Safety Investigation
Reporting and Record Keeping Manual
P-1049, Naval Construction Force Mobilization Manual Program Manual for Forces
Afloat
RF-310M-HH Suite B Multiband Handheld Radio Operation Manual
SECNAV M 5510.30, Personnel Security Program
SECNAV M 5510.36, Information Security Program
TM 11-5820-890-10-8 Operators Manual, SINCGARS GROUND COMBAT NETRADIO, ICOM
TM 9-1005-213-10, Operators Manual Machine Gun, Cal. 50; Browning M2 Heavy
TM 9-1010-230-10, Operators Manual Machine Gun, 40mm, MK19, MOD3
TM S6470-AD-OMP-010 Chemical Biological Mask Type M50
TM SS200-AP-MMO-010 Operator manual for Joint Service Lightweight Integrated
Suit Technology (JSLIST) Chemical Protective Ensemble
TM-SW215-B4-MMO-010, Operator’s and Maintenance Manual for AN/PVS-12A,
Night Vision, Individual Weapon
TM-SW215-BC-MMO-010, Operator’s and Maintenance Manual for AN/PVS-12A,
Night Vision, Crew Served Weapons
63
Personal Qualification Standard
Feedback Form for NAVEDTRA 43904-E
From
Date
Via
Date
Department Head
Activity
Mailing Address
Email Address
DSN
PQS Title
NAVEDTRA
Section Affected
Page Number(s)
For faster response, you may email your feedback to the PQS Development Group at:
frank.topf@navy.mil. Please include the above information so that we may better serve
you.
Remarks/Recommendations (Use additional sheets if necessary):
64
(FOLD HERE)
------------------------------------------------------------------------------------------------------------------------------DEPARTMENT OF THE NAVY
OFFICIAL BUSINESS
COMMANDING OFFICER
NAVAL EDUCATION TRAINING COMMAND
1905 REGULUS AVE
VIRGINIA BEACH VA
23461
------------------------------------------------------------------------------------------------------------------------------(FOLD HERE)