Experiment No. 9
Aim:
Configuration and Connection of the Web Server, Domain Name System
Server (DNS) and the PCs.
Apparatus (Software):
 CISICO Packet Tracer.
Procedure:
To do this EXPERIMENT- follows these steps:
In this EXPERIMENT- students have to understand difference between two
different networks and how to connect them using a Router and implementing
gateway configurations. And students have to understand how to configure the
Servers and Domain Name System (DNS) Server.
Follow the following steps to complete this experiment:
Step 1: (Implement the network as shown in the Figure 1 below.)
 You can take multiple servers or DNS and multiple networks as you wish.
Step 2: (Components need to make the network show in Figure 1.)
 Figure 2 show the components need to make the network for this
experiment.
 We need the 12 computers to make the 4 networks of 3 separate computers
for better understanding.
 We need total 5 servers; you can take as you want.
 Here for 4 Networks, we need total 4 number of Switches (296024).
 And we also need 4 routers for interconnection of all components.
Figure 1. Setup for the Experiment
Figure 2. Components for the Network
Step 3: (Mansion the Networks Name and Addresses of the PCs, Reuters’s
FastEthernet0/0-FastEthernet0/1-Serial0/0/0-Serial0/0/1
shows in Figure 3.)
Figure 3. Name and Address must Mansion on the Network
Step 4: (Figure 4 shows Arrangement of the Components to make the Network
Effectively)
Figure 4. Arrangements of the Components
Step 5: (Figure 5 shows the Connection of the 12 PCs to 4 Switches to make
4 Separate Networks and network 2 include DNS Server)
DNS Sever
Network 2
Web Server Network 1,3,4
Figure 5. Connection of the 5 Separate Networks between Switches and PCs and 1 DNS
network
Step 6: (Figure 6 shows the Connection of 4 networks. In which 3 Web Server
Networks with PCs and 1 is the DNS server network and router connections.)
Figure 5. Connection of the 5 Separate Networks with the Switches.
Step 7: (Following Figures show how to give IP Addresses to the 12 PCs.)
Name of PC
IP Address of PC1
Name of PC
IP Address of PC2
Name of PC
IP Address of PC3
Name of PC
IP Address of PC4
.
.
.
Name of PC
IP Address of
PC30
Step 8: (Following Figures show how to give IP Addresses to the 4 Web
Servers and 1 Domain Name System (DNS) Server.)
Name of Server
IP Address of
Server
Name of Server
IP Address of
Server
Name of Server
IP Address of
Server
Name of Server
IP Address of
Server
Name of Server
IP Address of
Server
Step 9: (When we give the IP Addresses to the Servers and PCs then the
connection Lines will blink in Green Color.)
Green
Step 10. (This step is most important step of this lab experiment. In this step
we will see how to configure the Web Servers.)
 Configuration of Web Server 1. We will use the by default settings for this
server.
Name of Server
Go Here
On check buttons
Select this option
By default, Web Site on Web Server 1
 Configuration of Web Server 2. This time we just edit the existing Web files.
Name of Server
Go Here
On check buttons
Select this option
By default, Web files we can edit them.
Name of Server
Go on image.html and edit it
Name of Server
Doing some changes
Name of Server
Go on index.html and edit it
Name of Server
Doing some changes
Name of Server
Go on copyrights.html and edit it
Name of Server
File name changed
Doing some changes
Name of Server
Go on helloworld.html and edit it
Name of Server
Doing some changes
Name of Server
Import an image
Name of Server
A new Web Site on Web Server 2
 Configuration of Web Server 3. This time we will make a new web site on it.
Name of Server
Go Here
Select this option
On check buttons
I deleted all existing files and will try to
design new Web Site for Web Server 3
Name of Server
Html Code for Web Page of Server 3
 Configuration of Web Server 4. This time we will make another new web site
on Server 4.
Name of Server
Go Here
Select this option
On check buttons
I deleted all existing files and will try to
design new Web Site for Web Server 4
Name of Server
Html Code for Web Page form of
Server 4
Step 11. (This step is last and extremely important step of this lab
experiment. In this step we will see how to configure the DNS and
how to register Web Site on the DNS.)
 First of all, we have to give the DNS to all the Web Servers in IP Configuration
Settings. (IP Address of the DNS is 192.168.5.1)
 Then, we need to configure the DNS to server his services to the Web Servers.
Name of Server
Go Here
OFF check
buttons
Select this option
Name of Server
Go Here
ON check button
Select this option
Need to give name of Web
.com at end
IP Address of the server
where web site is located
Record of all web sites
 Now I directly registered all my web sites which I make in the 4 Web Servers.
Name of Server
Our 4 Web Sites registered now.
Step 12. (Testing of all the web servers and DNS)
 We can access Web Site from any PCs of our 4 different networks.
 Open the Web Browser of any PC and search the web site by his DNS registered
name.
Name of PC
Open the Web Browser
Name of PC
Search Website by name
Name of PC
Search Website by name
Name of PC
Search Website by name
Name of PC
Search Website by name
.
.
.
.
.
.
Name of PC
Search Website by name
Conclusion:
 In this Lab Experiment, our main focus is on the “Configuring of the
Servers. We see how to configure the servers with respect to their
services”.
 To see how Servers work we need to make a network on the CISCO.
 I make huge network for better understandings.
 We take 12 PCs to make to 4 different networks, 4 switches one each
network and 4 Routers to connect the networks with each other, and we
take 5 servers from which 4 are web servers in which I make the one
different website only to understanding. We can make any website we
want. And 1 server is used as DNS Server.
 The main function of the DNS Server is to server the names to their
corresponding Web Sevres’s IP address. We can make many different
DNS Server for better services in complex or in congestion condition.
 Complete the network, Perform Configurations, assign Gateway to
each PC and Run Ping Command to check the next connection.