AUTOMATIC WATER DISTILLER WITH BUILT-IN TANK
LISTON A 1104
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Monoblock (all-in-one) design with built-in tank
High quality distilled water – conductivity no more than 2,5 µS/cm (at 250 C)*
Low cost, comparing to distiller+separate tank systems
Electronic control system – automatic water and power cut-off when tank is full and
automatic start, after distillate withdrawal
Original design, which allows to produce distilled water with temperature about 35-400 C
without separate chiller
Electronic leakage protection system with solenoid valve
Easy-access evaporator, condenser-tank for effortless maintenance (cleaning, etc)
Easily replaceable condenser
Automatic water level control in the evaporator
Visual control of the distillate level in the tank (through glass level-tube on the front
panel)
All parts that contact water or steam are made of high quality stainless steel
Stainless steel tubular heater with extended resource.
Thermostatatic low-water cut-off safety system
All parts for installation included (ready for use out-of-the-box)
2-year worldwide warranty
Technical specifications:
Distillation capacity
Storage tank volume
Water consumption
Energy consumption
Power supply
Distillate conductivity
Material
Heater material
Dimensions (W x D x H)
Net weight
Continuous operating mode
(production/break)
Time to reach operating mode
(boil raw water after cold start)
Mean time between failures
Average lifetime
.
4 l/h
8l
40 l/h (10 l per 1 l of distilled water)
3 kW/h (0,75 kW/ l of distilled water)
230 V / 50 Hz, 3 kW, single phase
2,5 µS/cm (at 250 C)
Stainless steel
Stainless steel
630 х 350 х 490 mm
23 kg
8 hours / 2 hours
15 min
3500 hours
7 years