4P-4L-A2
CommScope—Proprietary and Confidential. Preliminary specifications are for illustrative purposes
only and will be updated prior to publication.
4-port sector antenna, 4x 694–960 MHz, 65° HPBW
l
With tilt indicators and integrated pluggable RET
Electrical Specifications
Frequency Band, MHz
Gain, dBi
Beamwidth, Horizontal, degrees
Beamwidth, Vertical, degrees
Beam Tilt, degrees
USLS (First Lobe), dB
Front
Front--to
to--Back Ratio, Copolarization
180° ± 30°, dB
Isolation, Cross Polarization, dB
VSWR | Return Loss, dB
PIM, 3rd Order, 2 x 20 W, dBc
Input Power per Port at 50°C,
maximum, watts
Polarization
Impedance
694–790
13.7
66
16.0
2– 16
15
790–890
14.3
62
14.4
2– 16
15
890–960
14.5
58
13.0
2– 16
15
25
25
25
28
28
28
1.5 | 14.0
1.5 | 14.0
1.5 | 14.0
-150
-150
-150
250
250
250
±45°
50 ohm
±45°
50 ohm
±45°
50 ohm
694–790
13.3
790–890
14.1
890–960
14.3
±0.5
±0.4
±0.3
±5
±3
±6
20
20
20
Electrical Specifications, BASTA*
Frequency Band, MHz
Gain by all Beam Tilts, average, dBi
Gain by all Beam Tilts Tolerance,
dB
Beamwidth, Horizontal Tolerance,
degrees
CPR at Boresight, dB
* CommScope
CommScope®
® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the
whitepaper Time to Raise the Bar on BSAs.
Array Layout
page 1 of 3
October 9, 2019
©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: October 9, 2019
4P-4L-A2
General Specifications
Operating Frequency Band
694 – 960 MHz
Antenna Type
Sector
Band
Single band
Performance Note
Outdoor usage
Total Input Power, maximum
800 W @ 50 °C
Mechanical Specifications
RF Connector Quantity, total
4
RF Connector Quantity, low band 4
RF Connector Interface
4.3-10 Female
Color
Light gray
Grounding Type
RF connector body grounded to reflector and mounting bracket
Radome Material
Fiberglass, UV resistant
RF Connector Location
Bottom
Wind Loading, frontal
1,185.0 N @ 150 km/h | 266.4 lbf @ 150 km/h
Wind Loading, lateral
440.0 N @ 150 km/h | 98.9 lbf @ 150 km/h
Wind Speed, maximum
241 km/h | 150 mph
Dimensions
Length
1500.0 mm | 59.1 in
Width
497.0 mm | 19.6 in
page 2 of 3
October 9, 2019
©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: October 9, 2019
4P-4L-A2
Depth
127.0 mm | 5.0 in
Net Weight, without mounting kit 23.5 kg | 51.8 lb
Packed Dimensions
Length
1700.0 mm | 66.9 in
Width
612.0 mm | 24.1 in
Depth
257.0 mm | 10.1 in
Shipping Weight
33.0 kg | 72.8 lb
Regulatory Compliance/Certifications
Agency
RoHS 2011/65/EU
ISO 9001:2015
China RoHS SJ/T 11364-2014
Classification
Compliant by Exemption
Designed, manufactured and/or distributed under this quality management system
Above Maximum Concentration Value (MCV)
* Footnotes
Performance Note
Severe environmental conditions may degrade optimum performance
page 3 of 3
October 9, 2019
©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: October 9, 2019