1 GHz Surge Protected Ground Block
Features
•Pressure forged brass with nickel plating. Brass is a material recommended by
the N.E.C. that is galvanically compatible to interface with ground wire (copper)
and “F” connectors (brass)
•Unique split bolt type ground (bond) clamp, which seizes without damaging the
ground wire
•Ground surface contact of greater than .400”
•Patented 4-sided diamond shaped contact that exerts 250 grams of pressure
and will accommodate all types of cable center conductors from 0.025 - 0.042
in, (based on SCTE 01-2006) without damaging the center contact
•Robust surge withstand capability, Meets IEEE C62-41-B3 combination wave
surge protection
SVGBSP
1 GHz Surge Protected Ground Block
•Certified to meet ANSI/SCTE 81-2007 specifications
•Extended bandwidth for higher frequency applications
•UL Approved
Electrical Specifications
Bandwidth
DC-1002 MHz
1002-1600 MHz
Return Loss
25 dB 18dB
Insertion Loss
0.3 dB
0.5dB
Ingress Shielding
120 dB
Surge Suppression Specifications
Specifications subject to change without notice
www.commscope.com
IEEE
C 62-41 B3, Combination Wave
Current Suppression
3000 amps.
Voltage Resistance
6000 volts
Insulation Resistance
>100 megohms
Voltage Breakdown
300V
Operating Temperature
-40°F to +150°F
1100 CommScope Place, SE • P.O. Box 1729 • Hickory, North Carolina 28603
Tel 1.800.982.1708 or 828.324.2200 • Fax 828.328.3400 • www.commscope.com
©2011 CommScope, Inc . All Rights Reserved • 06.11