February 2004
D EUTSCHE NORM
{
DIN EN 10060
Supersedes DIN 1013-1 and DIN 1013-2,
November 1976 editions, and DIN 59130,
September 1978 edition.
ICS 77.140.60
Hot rolled round steel bars
Dimensions and tolerances on shape and dimensions
English version of DIN EN 10060
Warmgewalzte Rundstäbe aus Stahl – Maße, Formtoleranzen und Grenzabmaße
This copy will not be updated in case of changes!
According to DIN reference sheet 7, reproduction of this copy is
permitted only for intra-company purposes of SMS Demag AG.
European Standard EN 10060 : 2003 has the status of a DIN Standard.
A comma is used as the decimal marker.
National foreword
This standard has been prepared by ECISS/TC 11 ‘Structural steel sections’.
The responsible German body involved in its preparation was the Normenausschuss Eisen und Stahl (Steel
and Iron Standards Committee), Technical Committee Maßnormen für Langerzeugnisse – Warmgewalzter
Stabstahl.
Amendments
DIN 1013-1 and DIN 1013-2, November 1976 editions, and DIN 59130, September 1978 edition, have been
superseded by the specifications of EN 10060.
Previous editions
DIN 1013: 1930-07, 1940x-07, 1959-06, 1963-10; DIN 1013-1: 1976-11; DIN 1013-2: 1976-11,
DIN 1612: 1924-09, 1932-01, 1943x-03; DIN 1613: 1924-09, 1929-08; DIN 1613-1: 1943x-09;
DIN 59130: 1959-06, 1963-10, 1971-10, 1978-09.
Continued overleaf.
Document comprises 9 pages.
4.13
Normung
© No part of this standard may be reproduced without the prior permission of
DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,
has the exclusive right of sale for German Standards (DIN-Normen).
English price group 07
www.din.de
www.beuth.de
=
05.04
9552518
EN 10060
October 2003
ICS 77.140.60
English version
Hot rolled round steel bars
Dimensions and tolerances on shape and dimensions
Ronds laminés à chaud – Dimensions
et tolérances sur la forme et les dimensions
Warmgewalzte Rundstäbe aus Stahl –
Maße, Formtoleranzen und Grenzabmaße
This European Standard was approved by CEN on 2003-09-18.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any
CEN member.
The European Standards exist in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a
CEN member into its own language and notified to the Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, the Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia,
Spain, Sweden, Switzerland, and the United Kingdom.
ÈÉË
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
Management Centre: rue de Stassart 36, B-1050 Brussels
© 2003. CEN – All rights of exploitation in any form and by any means
reserved worldwide for CEN national members.
Ref. No. EN 10060 : 2003 E
Page 2
EN 10060 : 2003
2
3
3
3
3
4
7
7
7
7
7
8
8
8
8
8
Page 3
EN 10060 : 2003
Page 4
EN 10060 : 2003
Page 5
EN 10060 : 2003
Page 6
EN 10060 : 2003
Page 7
EN 10060 : 2003
Page 8
EN 10060 : 2003