December 1998
D EUTSCHE NORM
Corrosion-resistant steel castings
{
English version of DIN EN 10283
EN 10283
ICS 77.140.20; 77.140.80
Descriptors: Steel, castings, testing.
Korrosionsbeständiger Stahlguß
This standard, together
with DIN EN 10213-1 and
DIN EN 10213-4, January
1996 editions, supersedes
DIN 17445, November 1984
edition.
European Standard EN 10283 : 1998 has the status of a DIN Standard.
A comma is used as the decimal marker.
National foreword
This standard has been prepared by ECISS/TC 31.
The responsible German body involved in its preparation was the Normenausschuß Eisen und Stahl (Steel
and Iron Standards Committee), Technical Committee Stahlguß.
DIN V 17006-100 is the standard corresponding to the document CR 10260 referred to in clause 2 of the EN.
Amendments
DIN 17445, November 1984 edition, has been superseded by the specifications of EN 10283.
Previous editions
DIN 17445: 1969-02, 1984-11.
National Annex NA
Standard referred to
(and not included in Normative references)
DIN V 17006-100 Designation systems for steel – Additional symbols for steel names
EN comprises 14 pages.
© No part of this standard may be reproduced without the prior permission of
DIN Deutsches Institut für Normung e. V., Berlin.
Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen).
Ref. No. DIN EN 10283 : 1998-12
English price group 08
Sales No. 1108
06.99
EN 10283
September 1998
ICS 77.140.20; 77.140.80
Descriptors: Steel, castings, testing.
English version
Corrosion-resistant steel castings
Aciers moulés résistant à la corrosion
Korrosionsbeständiger Stahlguß
This European Standard was approved by CEN on 1998-09-04.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN
member.
The European Standards exist in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a
CEN member into its own language and notified to the Central Secretariat has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, the Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,
and the United Kingdom.
ÈÉË
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
Central Secretariat: rue de Stassart 36, B-1050 Brussels
© 1998. CEN – All rights of exploitation in any form and by any means
reserved worldwide for CEN national members.
Ref. No. EN 10283 : 1998 E
Page 2
EN 10283 : 1998
2
3
3
3
4
4
4
4
4
9
9
9
9
9
10
10
11
11
11
11
11
11
12
12
12
12
12
12
12
13
14
Foreword
This European Standard has been prepared by the Technical Committee ECISS/TC 31 “Steel
castings” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by March 1999, and conflicting national
standards shall be withdrawn at the latest by March 1999.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Page 3
EN 10283 : 1998
Page 4
EN 10283 : 1998
Page 5
EN 10283 : 1998
Page 6
EN 10283 : 1998
Page 7
EN 10283 : 1998
Page 8
EN 10283 : 1998
Page 9
EN 10283 : 1998
Page 10
EN 10283 : 1998
Page 11
EN 10283 : 1998
Page 12
EN 10283 : 1998
Page 13
EN 10283 : 1998
Page 14
EN 10283 : 1998