Wire & Cable
Single Core Cables
Bare Copper Conductors
Portable Cord
Arc Welding Cables
THW Copper Conductor
THHN-THWN Copper
Conductor
TFFN Copper Conductor
Romex UF and NMC
Copper Conductor
Coaxial Cable
Instrumentation Cable
Saudi Cable Company
Ducab
Riyadh Cable
Jeddah Cable
MESC
General Cable
Alpha
Manhattan
Carol
Triangle
Belden
Rock Bestos
Custom Cable
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
LOW VOLTAGE POWER CABLES
Single core, PVC insulated annealed copper conductors (450/750 V)
Description
Single core cables with copper conductors, PVC insulated, rated 450/750 V
conforming to SASO & BS 6004
specification number 55
Construction
Conductor
Insulation
Plain annealed circular copper conforming to IEC:228, class 1 and 2.
(Also available in aluminum conductors
sizes 10 to 630 mm2).
Heat resistive PVC type 5, rated
85°C to 856746 (PVC type 1, 70°C
to 856746 also available).
To Order
Applications
Order by catalogue number, quantity and packaging required.
Typical applications include equipment wiring, switching and distribution installations in conduits on or under plaster.
CJA 1- 10A, 2000 metres in 100 m coils.
Example
Features
Note
Example
Insulation adheres tightly to conductors yet strips easily, leaves conductor clean
PVC insulation has good electrical properties.
If 70°C rated PVC insulation is desired,
change the second letter to '0' in the
catalogue number.
The catalogue number for 25 mm2,
70°C rated PVC insulated copper
conductor will be CDA1-10W.
Single core, PVC insulated annealed copper conductors
Rated (450/750 V)
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
MEDIUM VOLTAGE POWER CABLES
Armoured cables
PVC insulated 0.6/1 kV
Description
Multi-core cables with copper or aluminium conductors PVC insulated,
armoured and PVC sheathed. Cables are rated 0.6/1 kV and conform to
IEC:502.
Construction
Conductor
Assembly
Plain circular or sector, solid or stranded
copper and aluminium conductors, per
IEC:228, class 1 and 2.
Two, three or tour insulated conductors are laid up, filled with nonhygroscopic material compatible with
the insulation and covered with layer
of PVC bedding which may be an
integral part of the filling
Insulation
Armour
Heat resistive PVC type 5 to BS6746
rated 85DC for continuous operation.
(PVC rated 70DC to 856746 also available on request).
Galvanized steel tapes or steel wires
applied over the P'vC bedding.
Sheath
PVC type ST2 to IEC 502,
colour - black
Colours for core identification
Application
Two core - red and black
Three core - red, yellow and blue
Four core - red, yellow, blue and black
These cables are most suitable
for underground burial where
there is a risk of mechanical
damage.
To Order
Order by catalogue number, quantity and packaging required.
Example
FJM4- 1 1A-A01, 8 km, 16 non returnable reels 5OO m each.
Armoured cables
Copper Conductors PVC insulated 0.6/1 kV
DIMENSIONS AND WEIGHTS
DST armoured cables
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
Armoured cables
Copper Conductors PVC insulated 0.6/1 kV
DIMENSIONS AND WEIGHTS
DST armoured cables
re— Circular Solid Conductor
rm— Circular stranded Conductor
sm— sector stranded Conductor
* Circular conductors can be provided on request
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
Armoured cables
Copper Conductors PVC insulated 0.6/1 kV
DIMENSIONS AND WEIGHTS
RSW armoured cables
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
Unarmoured cables
XLPE insulated 0.6/1 kV
Description
Single core and multi-core cables with copper or aluminium conductors,
XLPE insulated, and PVC sheathed. Cables are rated 0.6/1 kV and conform
to IEC:502.
Construction
Conductor
Plain circular or sector solid/stranded
copper or aluminium conductors, p~r
IEC:228, class 1 and 2.
Insulation
XLPE (Cross-linked polyethylene) insulation, rated 90°C.
Assembly
Two,three or four insulated conductors are laid up, filled with nonhygroscopic material compatible with
the insulation. The filling may be
omitted provided the outer shape of
the cable remains
practically circular and no adhesion
occurs between cores and sheath.
Sheath
Colours for core identification
Single core - red ( black on request)
Two core - red and black
Three core - red, yellow and blue
Four core - red, yellow, blue and black
PVC type ST2 to IEC 502,
colour - black
To Order
Application
Order by catalogue number, quantity and packaging required.
These cables have been designated for general use including
underground burial, where they are not likely to suffer mechanical damage.
Example
ENH4-10A, 10km, (10x 1000), non returnable reels
Unarmoured cables
Copper Conductors XLPE insulated 0.6/1 kV
DIMENSIONS AND WEIGHTS
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
Unarmoured cables
Copper Conductors XLPE insulated 0.6/1 kV
DIMENSIONS AND WEIGHTS
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
Unarmoured cables
Copper Conductors XLPE insulated 0.6/1 kV
DIMENSIONS AND WEIGHTS
23.8
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
INSTRUMENTATION & THERMOCOUPLE CABLES
INDIVIDUAL AND OVERALL
SHIELDED MULTIPAIR/MULTITRIAD
OVERALL SHIELDED MULTIPAIR/MULTITRIAD
UL STANDARD 13, TYPE PLTC, CSA C22.2 NO. 214, PCC FT4 300 VOLT
UL STANDARD 13, TYPE PLTC, CSA C22.2 NO. 214, PCC FT4 300 VOLT
CHARACTERISTICS
OPERATING TEMPERATURE
CHARACTERISTICS
SPECIFICATIONS
OPERATING TEMPERATURE
•
•
•
•
• —20OC to 105OC
VOLTAGE RATING
• 300 Volt
PRODUCT DESCRIPTION
• Stranded Bare Copper Conductors
• PVC Insulation
Paired Construction Color Coded –
One Black, One White
Triad Construction Color Coded – One
Black, One White, One Red
White Conductor Printed with Pair/
Triad Number at one Inch Intervals
for Easy Identification.
• When Shielded: Aluminum Polyester
Tape and Tinned Copper Drain Wire
• PVC Jacket – Black, UV Resistant
• —20OC to 105OC
UL Standard 13, Type PLTC
CSA C22.2 No. 214, PCC FT4
Passes UL Vertical Tray Flame Test
Complies with NEC Article 725, Type
PLTC
• UL Listed, CSA Certified.
AVAILABILITY
• Bulk, Cut to Length
▲ Available in 1000 ft (305m) put-ups
VOLTAGE RATING
• 300 Volt
PRODUCT DESCRIPTION
• Stranded Bare Copper Conductors
• PVC Insulation
Paired Construction Color Coded –
One Black, One White
Triad Construction Color Coded – One
Black, One White, One Red
White Conductor Printed with Pair/
Triad Number at one Inch Intervals
for Easy Identification.
• When Shielded: Aluminum Polyester
Tape and Tinned Copper Drain Wire
• PVC Jacket – Black, UV Resistant
SPECIFICATIONS
•
•
•
•
UL Standard 13, Type PLTC
CSA C22.2 No. 214, PCC FT4
Passes UL Vertical Tray Flame Test
Complies with NEC Article 725, Type
PLTC
• UL Listed, CSA Certified.
AVAILABILITY
• Bulk, Cut to Length
▲ Available in 1000 ft (305m) put-ups
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
THERMOCOUPLE WIRE AND CABLE
MULTIPAIR OVERALL SHIELDED & INDIVIDUALLY &
OVERALL SHIELDED THERMOCOUPLE EXTEN.
CABLE UL STANDARD 13, TYPE PLTC 150oC 300 VOLT
CHARACTERISTICS
OPERATING TEMPERATURE
• —20OC to 105OC
VOLTAGE RATING
• 300 Volt
PRODUCT DESCRIPTION
• Solid Wire Matched and Calibrated to
Standard Limits of Error per ISA
Specification RP-1.1-3 and ANSI
Circular MC 96.1
• ANSI Color-Coded PVC Insulation and
Jacket
• Twisted Pairs
• Each Conductor Prited with a Pair
Number at one Inch Intervals.
Numbers are Printed Alternately and
Inverted:
• When Shielded: Aluminum/Polyster
Tape and Tinned Copper Drain Wire
Facing In
• ANSI Color-Coded PVC Jacket
• PVC Jacket – Black, UV Resistant
SPECIFICATIONS
•
•
•
•
•
•
ISA Specificatin TP-1.1-3
ANSI Circular MC 96.1
Passes UL Vertical Tray Flame Test
UL Standard 13, Type PLTC
NEC Article 725, Type PLTC
UL Listed
AVAILABILITY
• Bulk, Cut to Length
• Items Marked with ▲ Also available in
100 ft. (105m) put-ups
UNSHIELDED/OVERALL SHIELDED MULTIPAIR
INDIVIDUALLY AND OVERALL SHIELDED MULTIPAIR
UL STANDARD 1277, TYPE TC, 90oC 600 VOLT
CHARACTERISTICS
OPERATING TEMPERATURE
• —20OC to 90OC
VOLTAGE RATING
• 600 Volt
PRODUCT DESCRIPTION
• Stranded Bare Copper Conductors
• PVC/Nylon Insulation
Paired Construction Color Coded –
One Black, One White
White Conductor Printed with Pair/
Number for Easy Identification.
• When Shielded: Aluminum Polyester
Tape and Tinned Copper Drain Wire
• PVC Jacket – Black, UV Resistant
SPECIFICATIONS
• UL Standard 1277, Type TC
• Passes UL Vertical Tray Flame Test
• Complies with NEC Article 340 (Article
725 Class 1
† Not Ul Listed
• UL Listed
AVAILABILITY
• Bulk, Cut to Length
▲ Available in 1000 ft (305m) put-ups
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
INSTRUMENTATION & THERMOCOUPLE CABLES
INSTRUMENTATION/PROCESS CONTROL CABLES POWER LIMITED TRAY
CABLES 300 VOLTS (TYPE PLTC) XLPE INSULATED MULTI PAIR/MULTI TRAID
INDIVIDUAL & OVERALL SHIELDED
Temperature range –40oC to +90oC
Specifications: UL13
Application: Can be used in cable tray, conduit or direct burial application
for instrumentation / process control, in dry or wet locations.
Conductor
Tinned copper to ASTM B33 &
stranded to class B of ASTM B8.
Insulation
PAIRS
Flame retardant XLPE to ICEA S-66524.
Pair Colour Code
White and black with pair number on
white conductor.
Triple Colour Code
White, black and red with triple
number on white conductor.
Pairs/Triplers Twisting
All pairs / triples are twisted to
counter electromagnetic noise.
Individual and Overall
Each pair / triple is shielded with
Shielding
aluminium polyester tape and a
tinned copper drain wire, for
maximum electrostatic noise and
crosstalk rejection. All pair/triple
shields are electrically isolated from
each other. individually shielded
pairs/ triples cabled with nonhygroscopic fillers if necessary and
the entire assembly is shielded with
aluminium polyester tape and a
tinned copper drain wire.
Jacket
Extruded black PVC as per UL13, oil
and sunlight resistant, passes flame
test as per IEEE - 383 (70000 BTU).
The jacket is impervious to vapour
and moisture penetration.
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
INSTRUMENTATION/PROCESS CONTROL CABLES POWER LIMITED TRAY
CABLES 300 VOLTS (TYPE PLTC) WIRE ARMOURED XLPE INSULATED MULTI PAIR/TRIAD
OVERALL SHIELDED
Temperature range –40oC to +90oC
Specifications: UL13
Application: Can be used in cable tray, conduit or direct burial application for instrumentation/process control, in dry or wet location. The
wire armour provides longitudinal strength for use as a messenger cable or for support in vertical drops (NEC SECTION 300-19) and provides
the protection against the mechanical damage.
Conductor
Tinned copper to ASTM B33
stranded to class B of ASTM B8.
&
Flame retardant XLPE to ICEA
-66-524.
S
Insulation
PAIRS
Pair Colour Code
White and black with pair number on
white conductor.
Triple Colour Code
White, black and red with triple
number on white conductor.
Pairs/Triplers Twisting
All pairs / triples are twisted to counter
electromagnetic noise.
Overall Shielding
Inner Jacket
Wire armour
Outer Jacket
Twisted Pairs/triples are cabled with
non-hygroscopic fillers if necessary
and the entire assembly is shielded
with aluminum polyester tape and a
tinned copper drain wire.
Extruded black PVC as per UL13
A serving of round galvanised steel
wires is applied with 90% minimum
coverage.
Extruded black PVC as per UL 13 is oil
and sun light resistant and passes
flame test as per IEEE-383 (70000
BTU)
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
INSTRUMENTATION & THERMOCOUPLE CABLES
BASIC CABLE CONSTRUCTION
The aim of cabling fibers is to provide adequate protection during cable installation
and service to ensure that transmission properties remain stable throughout the life
of the system. The overall design of an optical fiber cable depends upon the
environmental conditions in which the cable is to be employed. as well as installation
and service conditions. The optical fiber cable is a complicated composite cylindrical
structure. In general the cable consists of the following six major components.
(1) The loose tube/ tight buffer. made up of polybutylene terephthalate/
thermoplastic elastomer.
(2) The central strength member (epoxyl glass rod or steel strands) acts as a
strengthening element. and enables the cable to be held under tension at low
strain.
(3) The peripheral strength member (Aramidi Glass yarns) to supply the principal
tensile strength to the cable during installation and to withstand
everyday
stress experienced by the cable.
(4) Steel Armouring. corrugated transversly, is provided for giving lateral strength
and bending flexibility to the cable. It makes the cable rodent and termite proof.
(5) Filling gel, flooding gel. water blocking tape and moisture barrier tape are
provided for protecting the cable from moisture and water.
MEFC OPTICAL FIBER CABLES PRODUCT
RANGE
INDOOR CABLES
1.
2.
3.
4.
SIMPLEX CABLE
DUPLEX (ZIPCORD)
DUPLEX (Round)
INDOOR TIGHT BUFFER CABLE.
OUTDOOR CABLES
1.
2.
3.
4.
5.
DUCT CABLE
DIRECT BURIED CABLE
ARMOURED CABLE
AERIAL (SELF-SUPPORTING) CABLE.
HYBRID CABLE.
NOTE: Metallic duct & direct buried cables contain aluminium moisture barrier tape.
Non-metallic cable consists of dielectric central – strength member & aramid/glass
yarns.
Armoured cables can be offered with steel wire & corrugated polymer coated steel
tape armouring. All dielectric self supporting type & figure 8 type aerial cables are
also available.
(6) An outer jacket (generally polyethylene) for providing necessary mechanical and
environmental protection to the cable.
NATURAL PARAMETERS WHICH CAN AFFECT
THE OPTICAL FIBER CABLES
PARAMETER
EFFECT
PROTECTION PROVIDED
MOISTURE
Corrosion, Electric breakdown,
Degradation of fiber mechanical
strength.
LIGHTNING
Puncture of cable sheath, Fusing Metallic tapes with good temp.
of metallic parts.
and electrical conductivity
characteristics, or use of all
dielectric cable.
SUNLIGHT
Degradation of Mechanical
properties. Colour fading
Laminated water block tapes,
Metalic moisture barrier tapes,
Flooding gel/filling.
Use of additives in sheath/
jacket materials.
RODENTS
BIRDS,
INSECTS
Sheath Damage. Fiber Break
Corrugated steel Tape.
Aluminium tape
Rainwater
Corrosion. Water penetration,
Degradation of fiber mechanical
strength.
Flooding gel & Filling gel.
Temperature
Thermal contraction/expansion
Use of materials with low
coefficient of thermal
expansion.
WINDS
Increase in mechanical strain,
Abrasive damage due to
vibrations.
High tensile modulus, Enough
margins between operating
tensile loads & designed tensile
loads.
QUALITY ASSURANCE
With our highly skilled and qualified
workforce and sophisticated machinery, it
is ensured that consistently high quality
Optical Fiber Cables are delivered to the
customers. Continuous quality checks
during
m a nu f a c t u r in g
and
comprehensive cable tests guarantee the
quality, reliability and performance of the
cables during installation and operation.
Tests are conducted as per international
standards (IEC, ITU - T, EIA/ TIA), and to
meet customer specific requirements.
After conducting various mechanical
and environmental tests the results are
evaluated to guarantee the integrity of
transmission through optical fibers in the
cable.
Tensile stresses can occur during cable
installation time. These stresses must not
affect the functioning of optical fiber.
Finished cables are type tested on tensile
testing machine to measure fiber strain, "
E
f' cable strain “Ec" and change in
attenuaton as a function of tensile
load "F".
Optical cables are subject to a wide variety of temperatures (-40" C to +70"C) during
operation and storage. These changes should not affect the optical transmission in
the fibers. In order to determine the performance of the cable over this wide
temperature range, finished cable is put in a computer controlled climatic chamber
and change in attenuation is measured by OTDR, as a function of
temperature cycles.
Beside these tests, all our cables are type tested for Impact resistance, Crush
resistance, Torsion and repeated bending. Statistical quality control techniques are
implimented to verify the consistency in product quality and continuously monitor the
performance of the cable.
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
DUPLEX O.F. CABLE (Tight Buffer)
SIMPLEX O.F. CABLE (Tight Buffer)
FEATURES
•
•
•
•
•
•
Simplex fiber can be either single mode or multi mode.
Easier to use as Patch cords.
Light, Flexible, Easy Connection and Handling
Can be easily installed in Trays, Conduit or Duct.
Flame retardant outer sheath.
Can with Stand wide range of temperatures and high tensile loads.
FEATURES
•
•
•
•
•
•
APPLICATION
•
•
•
Indoor application.
Local area Network
Limited outdoor use.
APPLICATION
•
•
•
TECHNICAL SPECIFICATION
Fiber
Strength member
Out sheath
Cable OD
Cable weight
Minimum bend radius
Minimum bend radius
Permissible tension
Operating Temperature
Storage temperature
Silica based primary coated fiber
Aramid yarn
Flame retardant jacketing
3.0 mm
8.0 kg/Km
30mm (no load condition)
45 mm (load condition)
Max. 450 Newton
-20oC to +70oC
-40oC to +70oC
Fiber
Strength member
Out sheath
Cable OD
Cable weight
Minimum bend radius
Minimum bend radius
Permissible tension
Operating Temperature
Storage temperature
Type of packaging: Plastic reel flange 270mm
Standard length: 1000ft.
SXL-1
50/125
SXRS-2
62.5/125
ATTENUATION
db/km
BANDWIDTH
MZH-Km
850nm 1300nm 1550nm
MAXIMUM
3.5
2.0
n/a
TYPICAL
2.6
1.1
n/a
MAXIMUM
3.5
1.0
n/a
TYPICAL
2.9
0.9
n/a
MAXIMUM
5.0
3.0
n/a
SXRS-3
100/140
TYPICAL
4.5
2.5
n/a
MAXIMUM
n/a
0.7
0.7
SXRS-4
SINGLE
MODE
TYPICAL
n/a
0.5
0.5
850nm
1300nm
400
400
160
500
100
n/a
100
n/a
Type of packaging: Plastic reel flange 270mm
Standard length: 500ft.
OPTICAL FIBER SPECIFICATIONS RISER-SIMPLEX
PART
No.
DXRS-1
SXPL-1
SXPL-2
SXPL-3
SXPL-4
SXPL-5
ATTENUATION
db/km
Fiber Type
BANDWIDTH
MZH-Km
850nm 1300nm 1550nm
62.5/1.25
50/1225
100/140
SINGLE
MODE
62.5/125
MAXIMUM
3.5
1.0
n/a
TYPICAL
2.9
0.9
n/a
MAXIMUM
3.5
2.0
n/a
TYPICAL
2.6
1.1
n/a
MAXIMUM
5.5
3.5
n/a
TYPICAL
4.5
2.5
n/a
MAXIMUM
n/a
1.5
1.5
TYPICAL
n/a
0.5
MAXIMUM
3.75
1.5
850nm
160
400
ATTENUATION
db/km
Fiber Type
50/125
MAXIMUM
3.5
2.0
n/a
TYPICAL
2.6
1.1
n/a
MAXIMUM
3.5
1.5
n/a
TYPICAL
2.9
0.9
n/a
DXRS-2
62.5/125
MAXIMUM
5.5
3.5
n/a
DXRS-3
100/140
TYPICAL
4.5
2.5
n/a
SINGLE
MODE
MAXIMUM
n/a
1.5
1.5
DXRS-4
TYPICAL
n/a
0.5
0.5
400
850nm
1300nm
400
400
160
500
100
100
n/a
n/a
OPTICAL FIBER SPECIFICATIONS PLENUM-SIMPLEX
1300nm
500
BANDWIDTH
MZH-Km
850nm 1300nm 1550nm
OPTICAL FIBER SPECIFICATIONS PLENUM-SIMPLEX
PART
No.
Silica based primary coated fiber
Aramid yarn
Flame retardant jacketing
3.0 mm x 6.0mm
17 kg/Km
30mm (no load condition)
45 mm (load condition)
Max. 685 Newton
-20oC to +70oC
-40oC to +70oC
Packaging Information
OPTICAL FIBER SPECIFICATIONS RISER-SIMPLEX
Fiber Type
Indoor application.
Local area Network
Limited outdoor use.
TECHNICAL SPECIFICATION
Packaging Information
PART
No.
Duplex fiber can be either single mode or multi mode.
Easier to use as Patch cords.
Light, Flexible, Easy Connection and Handling
Can be easily installed in Trays, Conduit or Duct.
Flame retardant outer sheath.
Can with Stand wide range of temperatures and high tensile loads.
PART
No.
DXPL-1
62.5/1.25
100
DXPL-2
50/1225
0.5
n/a
n/a
DXPL-3
100/140
n/a
160
200
DXPL-5
BANDWIDTH
MZH-Km
850nm 1300nm 1550nm
100
DXPL-4
ATTENUATION
db/km
Fiber Type
SINGLE
MODE
62.5/125
MAXIMUM
3.5
1.0
n/a
850nm
1300nm
160
500
400
400
100
100
TYPICAL
2.9
0.9
n/a
MAXIMUM
3.5
2.0
n/a
TYPICAL
2.6
1.1
n/a
MAXIMUM
5.5
3.5
n/a
TYPICAL
4.5
2.5
n/a
MAXIMUM
n/a
1.5
1.5
TYPICAL
n/a
0.5
0.5
n/a
n/a
MAXIMUM
3.75
1.5
n/a
160
200
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
DIRECT BURIED O.F. CABLE
INDOOR O.F. CABLE (Tight Buffer)
FEATURES
•
•
•
•
FEATURES
•
Conforms to MOPTT spec. MAT – 1602.
All dielectric design for EMI immunity.
Available UL listed type OFNR or OFNP type.
Light weight & small ins size (easy installation)
•
•
APPLICATION
•
•
•
•
Computer network.
Local area networks
Data Links.
APPLICATION
DESCRIPTION
The tight buffered optical fibers are assembled around the CSM. Which is possess
excellent dielectric properties & high resistance to elongation & shrinkage. Aramid
yarns serves as peripheral strength member. The outer sheath is made up of flame
retardant halogen free copolymer compound. The cable is available up to 12 tight –
buffered SM/MM optical fibers.
TIGHT BUFFERED OPTICAL FIBER CABLE – INDOOR
PRODUCT
No.
FIBER
COUNT
The cable allows higher tensile load and larger
pulling – in lengths.
No stress on fibers during installation, operation
& maintenance.
The thixotropic jelly prevents axial migration of
water.
The cable sheaths are specially designed for
aggressive environments.
OUTER
DIA (mm)
NET
WEIGHT
(kg)
STANDARD
LENGTH
(Meter)
DRUM
SIZE
(Flange
Dia. mm)
•
•
•
•
High speed voice, video & data communication.
Telemetry and remote control.
Local area network.
Long haul network (Duct & Direct burial)
DESCRIPTION
The cable has been designed for outdoor underground (Direct – Burial) application.
The PBT loose tubes prevent the optical fibers from axial or radial stresses by
allowing free movement of fibers within the tube. Each loose tube (filled with high
quality thixotropic gel) contains a maximum of 12 fibers. The cable is well guarded
to protect optical & mechanical characteristics of the fibers. The outer jacket has
been specially designed to be moisture ultraviolet & fungus resistant.
MECHANICAL CHARACTERISTICS
Minimum bending radius
Minimum bending radius
Tensile strength
15 x cable dia. (no load)
20 x Cable dia. (Full load)
≥1KN (others upon request)
TBI-004
4
6.8
48
5000
1000
TBI-006
6
6.8
49
5000
1000
TEMPERATURE RANGE
TBI-008
8
7.4
55
5000
1000
TBI-010
10
7.8
65
5000
1000
Storage temperature
Operating Temperature
TBI-012
12
8.4
75
5000
1100
MECHANICAL CHARACTERISTICS
Minimum bending radius
Minimum bending radius
Tensile strength
-20oC to +60oC
-20oC to +70oC
TIGHT BUFFERED OPTICAL FIBER CABLE – INDOOR
15 x cable dia. (no load)
20 x Cable dia. (Full load)
≥500N (others upon request)
PRODUCT
No.
FIBER
COUNT
No. of
LT
No. of SM
Fibers/LT
OUTER
DIA (mm)
NET
WEIGH
T (kg)
DELIVERY
LENGTH
(Meter)
DRUM
SIZE
(Flange
Dia. mm)
DBR – 004
4
2
2
14.80
140.00
5000
1800
DBR – 006
6
3
2
14.80
141.50
5000
1800
DBR – 008
8
4
2
14.80
142.00
5000
1800
DBR – 012
12
6
2
14.80
142.00
5000
1800
DBR – 016
16
4
4
16.30
174.00
4000
1800
DBR – 024
24
6
4
16.30
176.00
4000
1800
DBR – 030
30
5
6
18.00
211.00
3000
1800
DBR – 036
36
6
6
18.00
218.00
3000
1800
DBR – 048
48
8
6
19.55
250.00
2500
1800
DBR – 096
96
8
12
21.00
297.00
2500
1800
TEMPERATURE RANGE
Storage temperature
Operating Temperature
-20oC to +60oC
-20oC to +70oC
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
ARMOURED O.F. CABLE
HYBRID (FIBER/COPPER) CABLE
FEATURES
•
•
•
Rodent & Termite proof.
Resist Corrosion, mechanical & physical stresses in the cable.
Perfect moisture/chemical barrier.
FEATURES
•
•
•
•
APPLICATION
•
•
•
Trunk, junction networks and inter exchange links.
Oil fields & Railway communications.
Long haul networks (under ground).
Utilize advantages of bot copper & fiber.
Simplified cable installation and reduced costs
Increased communication reliability through media diversity.
6/12/24/36 Fibers with a copper pari hybrid cables are available.
APPLICATION
DESCRIPTION
The cable has been designed for underground laying. It is a loose tube construction.
The gel filled loose tubes are stranded around FRP Central Strength member and
the cable core is flooded with flooding gel. The aramid or glass yarns put over the
cable core supplement the tensile strength provided by FRP. Steel tape armouring,
corrugated transversely, forms an integral bonded part of the armoured cable.
15 x cable dia. (no load)
20 x Cable dia. (Full load)
≥1.3 x W X 9.8 N (“W“ weight of cable kg/km)
TEMPERATURE RANGE
-20oC to +60oC
-20oC to +70oC
Storage temperature
Operating Temperature
Network requiring media diversity.
PTT subscriber loop network.
Engineering orderwire communication.
As remote power feed for fiber optic links.
DESCRIPTION
The Hybrid cable shall be tailor made to suit customer requirements.
The cables are designed for underground application. Copper conductors (twisted
pairs, co-axial cables, power feed conductors etc.) and loose buffer tubes containing
optical fibers are assembled around dielectric central strength member. Rest of the
cable follows general constructional details for loose tube fiber optic cables. Both
halogen –free and standard polyethylene jackets can be provided.
MECHANICAL CHARACTERISTICS
Minimum bending radius
Minimum bending radius
Tensile strength
•
•
•
•
MECHANICAL CHARACTERISTICS
Minimum bending radius
Minimum bending radius
Tensile strength
15 x cable dia. (no load)
20 x Cable dia. (Full load)
As per requirement
TEMPERATURE RANGE
Storage temperature
Operating Temperature
PRODUCT
No.
Fiber
Count
No.
of
LT
No. of
SM
Fibers/
LT
Outer dia
mm
Net Wt.
Kg/Km
Delivery
Length
(mtr)
Drum size
(flange
dia. mm)
ARM – 004
4
2
2
17.40
245.00
4000
1800
ARM – 006
6
3
2
17.40
246.00
4000
1800
ARM – 008
8
4
2
18.52
279.00
3000
1800
ARM – 012
12
6
2
18.52
281.00
3000
1800
ARM – 018
18
6
2 or 4
18.52
281.00
3000
1800
ARM – 024
24
6
4
18.52
282.00
3000
1800
ARM – 048
48
6
8
19.72
318.00
3000
1800
-20oC to +60oC
-20oC to +70oC
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
FIBER OPTIC CABLES
CHARACTERSTICS AND ADVANTAGES OF OPTICAL FIBER CABLES
CHARACTERSTICS
ADVANTAGES
Low attenuation
Long repeater spacing or repeaterless networks
Wide bandwidth
Long transmission Capacity with simultaneous voice, data and video
transmission capabilities
Immunity from electromagnetic interference
No shielding problems, No crosstalk
Immunity from NEMP
(INCLEAR ELECTROMAGNETIC PULSES)
Ideal for high security applications
Non-Conductive
Transmitter and receiver are electrically isolated
Non-inductive
No danger of sparks from short circuits, perfect for use in hostile
environments
Small Size, Small bending Space efficient, ease installation with resulting cost benefits. Utilization
of existing duct systems
radius and light weight
UNDERGROUND DUCT METALLIC SM OPTICAL FIBRE CABLE
PRODUCT CODE FEFS
TECH. SPEC. NO.
1-Central Strength member
2-Colour coded fiber
3-Colour coded filled loses tubes
4-Filled interstices
5-Wraping tapes
6-Identification Tapes
TS - 26000
7-Swelling tapes
8-Glass yarne
9-Aluminum moisture barrier
10-Polyethylene sheath, Black
11-Sheath Marking
DESCRIPTION
APPLICATION
Singlemode optical fiber cables used in telecommunication networks or trunk
or inter-exchange routes. The cables are generally hauled into ducts
Singlemode fiber, filled colour coded loose tubes, assembled
around a central strength member (CSM), filled core , wrapped with
dielectric and water blocking tapes, glass yarn strength members,
aluminum polymer laminated tape and PE sheath, duct optical fiber
cable complying with MOPTT-MAT- 1601 Specifications
DUCT METALLIC CABLE
SCC Product
number
Fiber Count
Number of
loose tubes
Number of SM
Fibers per tube
Approx. Outer
Dia.
(mm)
Approx. Net wt.
(kgs/ km)
Delivery length
(meters)
Reel Size
(Flange Dia.)
(mm)
200001
4
2
2
13.5
153
6,000
1,800
200002
6
3
2
13.5
154
6,000
1,800
200003
8
4
2
13.5
156
6,000
1,800
200004
12
6
2
13.5
156
6,000
1,800
200005
16
4
4
13.5
156
6,000
1,800
200006
24
6
4
13.5
157
6,000
1,800
200007
30
5
6
15
187
6,000
1,900
200008
36
6
6
16
212
6,000
2,000
200009
48
6
8
16
213
6,000
2,000
CHARACTERISITICS
OPTICAL
MECHANICAL
ENVIRONMENTAL
Singlemode fiber optimized at 1,310 and/ or 1,550 nm
Pulling force (Maximum ) : 2,000 N
Bending Radius (minimum) :
Full load : 20 *cable diameter
No load : 10 *cable diameter
Operating Temperature : -30 C° : +70 C°
Storage temperature : -20 C° : +70 C°
Installation temperature : -10 c° : + 60 C°
Other fiber types / specs can be offered upon request
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
UNDERGROUND DUCT NON- METALLIC SM OPTICAL FIBRE CABLE
PRODUCT CODE FEFN
TECH. SPEC. NO.
1-Central Strength member
2-Colour coded fiber
3-Colour coded filled loses tubes
4-Filled interstices
5-Wraping tapes
6-Identification Tapes
TS - 26000
7-Swelling tapes
8-Polyethylene sheath, Black
9-Sheath marking
APPLICATION
DESCRIPTION
Singlemode optical fiber cables used in telecommunication networks or
trunk or inter-exchange routes. The cables are generally hauled into
ducts
Singlemode fiber, filled colour coded loose tubes, MDPE fillers, assembled around a central strength member (CSM), filled core, wrapped with
dielectric and water blocking tapes, glass yarn strength members PE
sheath, non-metallic OPTICAL FIBRE CABLE for underground duct
application complying with MOPTT MAT - 1601 specification.
DUCT METALLIC FREE CABLE
SCC Product
number
Fiber Count
Number of
loose tubes
Number of SM
Fibers per tube
Approx. Outer
Dia.
(mm)
Approx. Net wt.
(kgs/ km)
Delivery length
(meters)
Reel Size
(Flange Dia.)
(mm)
200010
4
2
2
12.0
124
6,000
1,700
200011
6
3
2
12.0
126
6,000
1,700
200012
8
4
2
12.0
126
6,000
1,700
200013
12
6
2
12.0
127
6,000
1,700
200014
16
4
4
12.0
127
6,000
1,700
200015
24
6
4
12.0
127
6,000
1,700
200016
30
5
6
13.6
155
6,000
1,800
200017
36
6
6
14.6
178
6,000
1,900
200018
48
6
8
14.6
179
6,000
1,900
Other fiber count cable—and delivery lengths are available on request
CHARACTERISITICS
OPTICAL
MECHANICAL
ENVIRONMENTAL
Singlemode fiber optimized at 1,310 and/ or 1,550 nm
Pulling force (Maximum ) : 2,000 N
Bending Radius (minimum) :
Full load : 20 *cable diameter
No load : 10 *cable diameter
Operating Temperature : -30 C° : +70 C°
Storage temperature : -20 C° : +70 C°
Installation temperature : -10 c° : + 60 C°
Other fiber types / specs can be offered upon request
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
UNDERGROUND DIRECT BURIED METALLIC SM OPTICAL FIBER CABLE
PRODUCT CODE FEFSE
TECH. SPEC. NO.
1-Central Strength member
2-Colour coded fiber
3-Colour coded filled loses tubes
4-Filled interstices
5-Wraping tapes
6-Identification Tapes
7-Swelling tapes
TS - 26000
8-Glass yarne
9-Aluminum moisture barrier
10-Inner Polyethylene sheath
11-Filling Compound
12-Outer polyethylene sheath, Black
13-Sheath Marking, White
APPLICATION
DESCRIPTION
Singlemode optical fiber cables generally used in telecommunication
networks or trunk or inter-exchange routes. The cables are used for
outdoor direct burial application.
Singlemode fiber, filled colour coded loose tubes, MDPE fillers, assembled around a central strength member (CSM), filled core, wrapped with
dielectric and water blocking tapes, glass yarn strength members aluminum polymer laminated tape, PE outer and inner sheath, OPTICAL FIBER CABLE for direct burial application complying with MOPTT MAT–
1601 Specifications
DUCT BURIED METALLIC CABLE
SCC Product
number
Fiber Count
Number of
loose tubes
Number of SM
Fibers per tube
Approx. Outer
Dia.
(mm)
Approx. Net wt.
(kgs/ km)
Delivery length
(meters)
Reel Size
(Flange Dia.)
(mm)
200019
4
2
2
15.0
181
6,000
1,900
200020
6
3
2
15.0
181
6,000
1,900
200021
8
4
2
15.0
182
6,000
1,900
200022
12
6
2
15.0
183
6,000
1,900
200023
16
4
4
15.0
183
6,000
1,900
200024
24
6
4
15.0
184
6,000
1,900
200025
30
5
6
16.5
219
6,000
2,000
200026
36
6
6
17.5
247
6,000
2,100
200027
48
6
8
17.5
248
6,000
2,100
Other fiber count cable—and delivery lengths are available on request
CHARACTERISITICS
OPTICAL
MECHANICAL
ENVIRONMENTAL
Singlemode fiber optimized at 1,310 and/ or 1,550 nm
Pulling force (Maximum ) : 1,000 N
Bending Radius (minimum) :
Full load : 20 *cable diameter
No load : 10 *cable diameter
Operating Temperature : -30 C° : +70 C°
Storage temperature : -20 C° : +70 C°
Installation temperature : -10 c° : + 60 C°
Other fiber types / specs can be offered upon request
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
UNDERGROUND DIRECT BURIED NON- METALLIC SM OPTICAL FIBER CABLE
PRODUCT CODE FEFNE
TECH. SPEC. NO.
1-Central Strength member
2-Colour coded fiber
3-Colour coded filled loses tubes
4-Filled interstices
5-Wraping tapes
6-Identification Tapes
TS - 26000
7-Swelling tapes
8-Glass yarne
9-Inner Polyethylene sheath
10-Filling Compound
11-Outer polyethylene sheath, Black
12-Sheath Marking, White
APPLICATION
DESCRIPTION
Singlemode optical fiber cables generally used in telecommunication
networks or trunk or inter-exchange routes. The cables are used for
outdoor direct burial application.
Singlemode fiber, filled colour coded loose tubes, MDPE fillers, assembled around a central strength member (CSM), filled core, wrapped with
dielectric and water blocking tapes, glass yarn strength members , PE
outer and inner sheath, non-metallic OPTICAL FIBER CABLE for direct
burial application complying with MOPTT MAT– 1601 Specifications
DUCT BURIED METAL FREE CABLE
SCC Product
number
Fiber Count
Number of
loose tubes
Number of SM
Fibers per tube
Approx. Outer
Dia.
(mm)
Approx. Net wt.
(kgs/ km)
Delivery length
(meters)
Reel Size
(Flange Dia.)
(mm)
200028
4
2
2
14.0
147
6,000
1,800
200029
6
3
2
14.0
148
6,000
1,800
200030
8
4
2
14.0
148
6,000
1,800
200031
12
6
2
14.0
149
6,000
1,800
200032
16
4
4
14.0
149
6,000
1,800
200033
24
6
4
14.0
150
6,000
1,800
200034
30
5
6
15.5
183
6,000
2,000
200035
36
6
6
16.0
210
6,000
2,000
200036
48
6
8
16.0
211
6,000
2,000
Other fiber count cable—and delivery lengths are available on request
CHARACTERISITICS
OPTICAL
MECHANICAL
ENVIRONMENTAL
Singlemode fiber optimized at 1,310 and/ or 1,550 nm
Pulling force (Maximum ) : 1,000 N
Bending Radius (minimum) :
Full load : 20 *cable diameter
No load : 10 *cable diameter
Operating Temperature : -30 C° : +70 C°
Storage temperature : -20 C° : +70 C°
Installation temperature : -10 c° : + 60 C°
Other fiber types / specs can be offered upon request
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
UNDERGROUND DIRECT BURIED ARMOURED SM OPTICAL FIBER CABLE
PRODUCT CODE FEFSDE
TECH. SPEC. NO.
1-Central Strength member
2-Colour coded fiber
3-Colour coded filled loses tubes
4-Filled interstices
5-Wraping tapes
6-Identification Tapes
TS - 26000
7-Swelling tapes
8-Glass yarne
9-Inner Polyethylene sheath
10-Corrugated steel tape
11-Outer polyethylene sheath, Black
12-Sheath Marking, White
APPLICATION
DESCRIPTION
Singlemode optical fiber cables generally used in telecommunication
networks or trunk or inter-exchange routes. The cables are used for
outdoor direct burial application.
Singlemode fiber, filled colour coded loose tubes, MDPE fillers, assembled around a central strength member (CSM), filled core, wrapped with
dielectric and water blocking tapes, glass yarn strength members , PE
inner sheath, Corrugated steel tape and PE outer sheath, OPTICAL
FIBER CABLE for direct burial application complying with
MOPTT MAT– 1601 Specifications
DUCT BURIED ARMOURED CABLE
SCC Product
number
Fiber Count
Number of
loose tubes
Number of SM
Fibers per tube
Approx. Outer
Dia.
(mm)
Approx. Net wt.
(kgs/ km)
Delivery length
(meters)
Reel Size
(Flange Dia.)
(mm)
200037
4
2
2
16.8
262
6,000
2,000
200038
6
3
2
16.8
263
6,000
2,000
200039
8
4
2
16.8
263
6,000
2,000
200040
12
6
2
16.8
264
6,000
2,000
200041
16
4
4
16.8
264
6,000
2,000
200042
24
6
4
16.8
265
6,000
2,000
200043
30
5
6
18.4
307
6,000
2,200
200044
36
6
6
19.3
336
6,000
2,200
200045
48
6
8
19.3
337
6,000
2,200
Other fiber count cable—and delivery lengths are available on request
CHARACTERISITICS
OPTICAL
MECHANICAL
ENVIRONMENTAL
Singlemode fiber optimized at 1,310 and/ or 1,550 nm
Pulling force (Maximum ) : 1,000 N
Bending Radius (minimum) :
Full load : 20 *cable diameter
No load : 10 *cable diameter
Operating Temperature : -30 C° : +70 C°
Storage temperature : -20 C° : +70 C°
Installation temperature : -10 c° : + 60 C°
Other fiber types / specs can be offered upon request
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
ACSR OVERHEAD CONDUCTOR
Aluminum conductor steel reinforced (ACSR)
Applications
ACSR is being universally used for the transmission of electric power over long
distances. It is also used as a messenger to support overhead electrical cables.
Features
Ideal combination of conductivity and strength to permit longest possible spans.
Minimum sag between supports with fewer towers required.
Description
Concentric lay stranded conductors made from round aluminium wires and round
zinc-coated steel (*) core wires constructed in accordance with ASTM 8232 (**).
Wide variety of sizes available in long lengths to suit both electrical and mechanical
design requirements. Good corrosion resistance
To order
Construction
Central core
Order by catalogue number, code word, quantity required.
A zinc-coated solid steel core wire according to ASTM 8498 or a zinc-coated
stranded steel core according to ASTM B500.
Example
SXX1-A3X code word 'Minorca", 14,000 m.
Outer layers
Aluminium wires 1350-H19 EC grade to ASTM 8230 concentrically laid up over the
central core.
* Aluminium-clad steel core wire per ASTM 8502 is also available.
** Also available in accordance with IEC209, 8S215 part 2 and DIN 48204.
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
Aluminum conductor steel reinforced (ACSR)
Continued
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
Aluminum clad steel reinforced
(ACSR/ AW )
Applications
ACSR / AW is being universally used for the transmission of electric power over
long distances. It is also used as a messenger to support overhead electrical
cables.
Features
Description
Concentric lay stranded conductors made from round aluminum wires and round
aluminum-clad steel core wires constructed in accordance with ASTM B549.
ACSR I AW incorporates aluminum clad steel wires ( AW wires) combining high
tensile strength of steel with high conductivity and high corrosion resistance (nongalvanic corrosion between aluminum wire and core wire).
This conductor offers reduced power loss and makes economical overhead transmission system .
Construction
To order
Central core
A round aluminum-clad steel core according to ASTM B502.
Order by catalogue number, code word, quantity required.
Outer layers
Example
VXX1-P4X code word 'Penguin/ AW 14,000 m
Aluminum wires 135O-H19 EC grade to ASTM B230 concentrically laid up over
the central core
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
Aluminum clad steel reinforced
(ACSR/ AW )
Continued
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
ACSR OVERHEAD CONDUCTOR
Aluminum conductor steel reinforced (ACSR)
Applications
ACSR is being universally used for the transmission of electric power over long
distances. It is also used as a messenger to support overhead electrical cables.
Features
Ideal combination of conductivity and strength to permit longest possible spans.
Minimum sag between supports with fewer towers required.
Description
Concentric lay stranded conductors made from round aluminium wires and round
zinc-coated steel (*) core wires constructed in accordance with ASTM 8232 (**).
Wide variety of sizes available in long lengths to suit both electrical and mechanical
design requirements. Good corrosion resistance
To order
Construction
Central core
Order by catalogue number, code word, quantity required.
A zinc-coated solid steel core wire according to ASTM 8498 or a zinc-coated
stranded steel core according to ASTM B500.
Example
SXX1-A3X code word 'Minorca", 14,000 m.
Outer layers
Aluminium wires 1350-H19 EC grade to ASTM 8230 concentrically laid up over the
central core.
* Aluminium-clad steel core wire per ASTM 8502 is also available.
** Also available in accordance with IEC209, 8S215 part 2 and DIN 48204.
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
Aluminum conductor steel reinforced (ACSR)
Continued
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
Aluminum clad steel reinforced
(ACSR/ AW )
Applications
ACSR / AW is being universally used for the transmission of electric power over
long distances. It is also used as a messenger to support overhead electrical
cables.
Features
Description
Concentric lay stranded conductors made from round aluminum wires and round
aluminum-clad steel core wires constructed in accordance with ASTM B549.
ACSR I AW incorporates aluminum clad steel wires ( AW wires) combining high
tensile strength of steel with high conductivity and high corrosion resistance (nongalvanic corrosion between aluminum wire and core wire).
This conductor offers reduced power loss and makes economical overhead transmission system .
Construction
To order
Central core
A round aluminum-clad steel core according to ASTM B502.
Order by catalogue number, code word, quantity required.
Outer layers
Example
VXX1-P4X code word 'Penguin/ AW 14,000 m
Aluminum wires 135O-H19 EC grade to ASTM B230 concentrically laid up over
the central core
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967
‫أسالك و كابالت‬
WIRES AND CABLES
Aluminum clad steel reinforced
(ACSR/ AW )
Continued
Electrolines Est.
P. O. Box. 942 Yanbu Saudi Arabia
Tel: +966 4 3225418 Fax: +966 4 3222213 Al-Jubail: Tel: +966 3 3632967 Fax: +966 3 3612967