ACTIVITY/GAWAIN
NAME:
LS1: Filipino
Gumawa ng sanaysay na may paksang “ Ang aking Sarili”. Gumamit ng
yellow pad o bond paper.
LS 2: SCIENTIFIC AND CRITICAL THINKING SKILLS
TASK : BATTERY OPERATED LIGHT BULB
Here’s what you need:

Two C Battery

A Light Bulb (With Screw-in Base)
Two Pieces Of Insulated Wire
Electrical Tape
switch
Plywood/illustration board




Follow these steps:
1. Strip about 3/4″ of insulation off each end of your two wires.
2. Tape one end of one wire to the negative end of your battery. Tape
the other end of the wire to one side of the light bulb stem.
3. Tape one end of the other wire to the positive end of your battery.
Tape the other end of the wire to the bottom of the light bulb stem.
4. Watch the light bulb light up!
The process is simple: Electrons flow out of the battery’s negative end
into the wire, go through the light bulb, and back into the positive side
of the battery. That’s all! You now have a battery operated light bulb.
Note: Use caution when handling the exposed wires. When connected to
power, they have a minimal electric charge to them that you probably
want to avoid. Also, avoid touching the light bulb when it’s on, especially
if it’s an incandescent. Those things heat up fast..
Watch this video for your reference
https://www.youtube.com/watch?v=GbmECqMuISk
BATTERY OPERATED LIGHT BULB SAMPLE
.
Note: take a picture while doing your experiment for your
documentation.
This will be submitted on April 11, 2022…..