How to Repair a Gas Fireplace
If you're wondering how to repair a gas fireplace, you've come to the right place. It has a
network of home professionals, including gas fireplace repair in Shreveport la. You can
search for these professionals by name or type in "gas fireplace repair shreveport la"
and read their detailed service descriptions and customer reviews. You'll find everything
from customer testimonials to project photos. Find a service that matches your budget
and style, and get the job done quickly and easily.
Before calling a gas fireplace repair shreveport la, make sure you've plugged in a
carbon monoxide monitor and detector, and cleaned any ports or valves on the unit.
Also, inspect the chimney for obstructions that might be preventing proper venting. This
can hinder the functioning of your fireplace and pose a safety risk. A gas fireplace repair
technician can also measure the carbon monoxide levels in the air near the fireplace to
make sure that there's no leak.
In addition to cleaning the combustion chamber, and gas fireplace repair Shreveport la
will check the pilot assembly. It is important to inspect the pilot assembly every year.
Although some models look different than others, they all have the same basic function.
A heated sensor generates a small voltage equal to one-fifth of a volt and sends that
signal to the main control valve. If the pilot doesn't light after a few seconds, try raising
the temperature to a higher setting or adjusting the thermostat.
The pilot light on a gas fireplace is the ignition source. Sometimes, the pilot light will
blow out, preventing the fireplace from turning on. To fix the issue, you can check the
pilot by checking if the flame is out. If there is, relight the pilot. If the pilot light won't stay
on, the problem is likely related to a faulty module. If the pilot light is working properly,
you should check the gas valve as well.
Another component that controls the gas valve is the thermocouple. This component
monitors the surrounding temperature and probes the gas to ignite if necessary. Make
sure the thermocouple is screwed in tightly and is positioned correctly. A thermopile is a
similar part but is connected to an electrical voltage, not gas. If you can't find a
thermocouple, check for loose wiring. If you notice a loose connection, the thermopile
might be the culprit.
If the problem is too difficult to fix yourself, consider hiring a professional gas fireplace
repair service. These services range in price depending on where you live, the size of
the fireplace, and how urgent it is. A professional gas fireplace service can save you
money on repair bills and other major expenses down the road. You can also do it
yourself, but only if you're confident and comfortable around natural gas. Make sure you
hire a service provider who is familiar with these appliances.