It is an introduction of the paper, how to make a tote bag of plump pocket. Because it is a free pattern (pattern free), you can use it to download or print, free of charge. ♪ I ♪ Please enjoy the
handmade means that show the pattern of how to make and also other handmade goods
Plump pocket tote bag
I put a tack plump pocket
tote bag ♪ is a little larger so that the texture of linen hemp mixed with live roughly machi
body was taken to walking or spread, and will come bottom.
In addition, the core of the table was the only part of the mouth in order to take advantage of
the texture of linen, because it put a thin core of the whole cloth quilt in, there is also a
sense of good solid degree.
Bag-05
※ In the paper some large full size, this is the other pattern dimensions.
You can print (PDF file) A4 size.
(This is the figure four, including crop)
To view the (PDF file) pattern, you must have free software "Acrobat Reader". Please use
the software from the Adobe site below.
♪ cute roundness in the city of wider
Kuttari nice pocket mouth.
♪ fun to think about the fabric of
■ Finished Size: 48cm handle height 32cm · 16cm · 32cm · gusset bottom width 48cm · width on the
materials used ■: linen blend hemp linen-hemp mixed (black series) Cotton (check system Black) (Nordic Pattern)
core bonding adhesion of thin quilt Singh
■ if making a reference to the recipe, ♪ I please make your way to easy to make the everyone
Although not specifically described is a process that can make a ■ iron, hit the dress pin, when the collapse defeat the seam allowance is, the iron Please spend. Also, dress pin, such as when
stitched, please hit the dress pin as necessary.
How to make a tote bag of plump pocket
Cut out and print the pattern, I bonded. Pull the
fabric line to make or pattern to match the
dimensions of the drawing, except pocket, we
each cut with a seam allowance. Put a core
bonded to the top of the port side of the two
pieces 7cm body.
Mark the position of a single external pocket in
the table body.
Paper because it is half and mark the center line
on the left side to match, is inverted inside out, I
mark on the right side as well.
I make a handle.
Open after turning on the crease to center fold in
half first, I folded to fit the center line from both
sides.
Fold it in half, I pressed by machine-sewing the
sides.
I make two pieces of this.
Sewn to fit the mouth on both sides of the cloth
Nakaomote in the mouth of the same cloth and
table cloth.
Fold the seam allowance mouth cloth, apply the
adhesive to the entire core quilt.
With a seam allowance on the pattern of the
pocket, I cut two pieces the same thing. I put a
core bonded to the top of the side to be table 5cm.
I sew a tack cloth pocket.
Nakaomote to each other according to the sign on
the outside of the tack, I stitched in the seam
allowance sewing machine parts only.
After that, I want to tack on both sides open.Takes
the tack cloth pocket in the same way with two
sheets.
Nakaomote the fabric according to the pocket,
leaving the mouth sewn around return.
Iron Tilt the front side, seam allowance and
returns it to the table. Fold in the seam allowance
of the opening returns, I will arrange with an
iron. I'll give at this point if you want to tag. (I did
not put in the plan at this point NOTES image is
not tagged)
External position of the table in the main pocket,
beat together the top corners of the pocket dress
pin, the center of the bottom, the tally.
Arranged along a natural part of the curve.
(Width of the pocket is a flabby state at this
time) sew on a sewing machine around.
I take the tack at each end of the top
pocket.Because there is the thickness of the fabric,
they may be shorter than the body and take the
street pattern, I fit the body.
So as to be the same length as the main body in a
state in which lie flat, I take the tack of the same
width from side to side. I tuck sewn to the
body.Clarity, the figure has written staggered,
please align the upper part.
I stitched the bottom body. First, according to the
long side of the fabric Nakaomote the underside
of the table cloth and the bottom one, I stitched.
Stitching in the same way also the other table
cloth and cloth bottom, defeat to bottom side seam
allowance. Fold in half Nakaomote, stitched on
both sides, divides the seam allowance.
I sew a gusset.
Fold the fabric in half, sew the two sides together,
leaving the mouth returns, divided by the seam
allowance.
Fold the bottom portion of the gusset, I sew and
take the town of 16cm. Defeat to bottom side
seam allowance as it is, I'll return to the table in a
bag.
On both sides of the handle, the bag in the bag and
I stitched the table. The outer bag in a table,
outside the inner bag will keep the state of the
table. Align the handle to the position of holding
the outer bag binder, I keep looking at the dress
pin position 5cm from the seam allowance. I put
in the inner bag. (In this state the inner bag and
the bag together to Nakaomote table, the handle is
sandwiched in between) sewn around the
circumference of the mouth.
Pulled out a bag from the table in the mouth of the
bag returned, I returned to the table. I handstitched mouth sewn shut barbs of the inner
bag.(If you do not mind the seam, stitch sewing
machine is also OK)