Uploaded by delo.92

8-RA-01-00-020

advertisement
Power your Signal
8-RA-01-00-020
Compliant with AISGV2.0, Daisy Chain feasibility.
Built in antenna, plug and play.
Compatible antennas either locally through a computer and a CCU, or remotely via ether-net network or over
the internet.
Electrical Specifications
Power Supply
10~30Vdc Compliant With AISG V2.0And 3GPP TS 25.461 V6.0.0
Power Consumption
≤2W(Idle), ≤10W(in Motion).
Hardware Interface
RS485 & BMA-JFB2E
Logical Interface
HEX Coded Commands Based On HDLC Protocol.
Application
AISG V2.0
Adjustment Time(Full Range)
<4 Min
Adjustment Cycles
≥10000
Torque Max.
≥160mN.m @60 r/min
IEC 61000-4-5 Current Pulse Profile,
Lightning Protection Rating
Line to Ground,8/20 μs@ 8kA,≥±5Repetitions
Line to Line,8/20 μs@ 3kA,≥±5Repetitions
Mechanical Specifications
Appearance
According To IEC 60130-9 And AISG.
Connectors
Daisy Chain In : Male
Daisy Chain Out : Female
Housing Material
Aluminum Alloy
Housing Color
Aluminum gray
Dimensions(mm)
220X80X30
Net Weight(Kg)
0.6
Operating Temperature (℃)
-40 ~ +70
Storage Temperature(℃)
-55 ~ +75
Humidity(%)
Up to 95
Atmospheric Pressure(Kpa)
70 ~106
IP Rating
IP65
Max Wind Speed (Km/h)
200
MOBI Antenna Technologies (Shenzhen) Co., Ltd.
www.mobi-antenna.com
Page 1 / 2
Power your Signal
A member of
Certification:
Function introduction
This module can support electric and manual adjustment at the same time. In the case of no power supply in the
field, only one word or cross screwdriver is needed to insert into the hand to adjust the hole position to adjust the
electric downward tilt Angle
MOBI Antenna Technologies (Shenzhen) Co., Ltd.
www.mobi-antenna.com
Page 2 / 2
Download