Investigation 2.2 Aim: To investigate different ways of connecting a torch battery and bulb. PART A – Lighting a bulb 1. Use a battery and one connecting wire to make the bulb light Draw a diagram of how you connected the battery and bulb 2. See if you can find atleast one other way of making the bulb light Draw diagrams of any ways you discover On the diagram below, mark the specific places where the bulb must be touched for it to light On the diagram below, mark the specific places that must be touched on the battery for the bulb to light 3. Can you make the bulb lighting using two connecting wires? Draw diagrams of your setup Investigation 2.2 Aim: To investigate different ways of connecting a torch battery and bulb. PART A – Lighting a bulb 1. Use a battery and one connecting wire to make the bulb light Draw a diagram of how you connected the battery and bulb 2. See if you can find atleast one other way of making the bulb light Draw diagrams of any ways you discover On the diagram below, mark the specific places where the bulb must be touched for it to light On the diagram below, mark the specific places that must be touched on the battery for the bulb to light 3. Can you make the bulb lighting using two connecting wires? Draw diagrams of your setup
