DS200TBQDG1A - TERM BD (R-S-T) EXT
worldofcontrols.com/ds200tbqdg1a-term-bd-r-s-t-ext
SPECIFICATIONS
Part No.: DS200TBQDG1A
Manufacturer: General Electric
Product Type: Terminal Circuit Board Input/Output
Series: Mark V
DS200TBQDG1A is an I/O Terminal Circuit Board under Mark V. Two terminal
blocks are included on the GE RST Extension Analog Termination Board
DS200TBQDG1A. Each block comprises 107 signal wire terminals.
Multiple test points, two jumpers, and three 34-pin connections are also included on
the GE RST Extension Analog Termination Board DS200TBQDG1A.
On the board, the jumpers are labeled BJ1 and BJ2. You can utilize the jumpers to
configure the board's processing to satisfy the drive's specific requirements when
you initially install it. The information provided in the textual material that came
with the board can be used by the installer to accomplish this.
On the board, each jumper has three pins. When the jumper covers two pins, one
position is specified (for example pins 1 and 2). When two other pins are covered by
the jumper, the other position is defined (for example pins 2 and 3).
The installer cannot relocate some jumpers since they only support one jumper
position. At the production, the alternate position is utilized to test a specific circuit
or function of the board.
The installer must check the new board and the old board together and adjust the
jumpers on the new board to the same position as the jumpers on the old board
while replacing the board since the original board is defective.
The installer can either take notes on the jumper positions on the problematic board
and match them up on the new board. Alternatively, compare the two boards side by
side and match the jumpers on the fresh board to the jumpers on the damaged
board.
The most extensive assortment of GE Speedtronic Mark V control replacement
components can be found at WOC. Our experts are available to assist you with your Mark
V requirements at any time. Please contact WOC if you require any additional
information.
Frequently Asked Questions
What is DS200TBQDG1A?
DS200TBQDG1A is an I/O Terminal Circuit Board under Mark V series.
1/2
What are the input and output types on the DS200TBQDG1A?
The LVDT input signals on the DS200TBQDG1A are combined with milliamp output on
the DS200TBQDG1A.
What more termination signals does the DS200TBQDG1A have besides input
and output?
DS200TBQDG1A has proximitors in addition to input and output signals.
How to Obtain DS200TBQDG1A?
WOC provides DS200TBQDG1A as well as other turbine control products. Contact World
of Controls.
2/2