• REFERENCE
• The users should not touch the print head nozzles and the electrical contacts.
• 3. Next, users should firmly raise the print Head Lock Lever until it stops. The Print Head Lock Lever might feel heavy.
• 4. Thereafter, do insert the Print Head.
• 5. Finally, do push the Print Head to hold it in place and then lower the Print Head Lock Lever carefully.
•
• IMPORTANT
• Whenever, the Top Cover is left open for more than 10 minutes, then the Print Head Holder will be moving to the right. Now, do
close and reopen the Top Cover to return the Holder to the centre.
1. Now, do make sure that the Print Head is installed properly.
•
• Installing the Ink Tanks
• To check compatibility of ink tanks with printer, users should refer to the back cover of the Quick Start Guide.
1. To begin with, users should pull the orange tape in the direction of the arrow to peel off the protective film and then do remove
the film completely. The users may nute that if the air hole is blocked with the remaining film then the ink might leak out or may
not eject properly.
2. Now, users should twist off and discard the orange protective cap(B) which is located on the bottom of the ink tank. The users
should not touch the electrical contacts and ink port.
3. Next, users should insert the ink tank into the right-hand slot and then press the mark on the ink tank until it clicks into place.
4. Do ensure that the ink lamp lights red. According to the coloured labels, do install all the ink tanks in order from right to left.
5. Now, do close the Top Cover. The Canon Printer will start operating. The users should wait for 2 minutes until the printer stops
making noise. After setup, the first- or second-time printing will take few minutes before it becomes ready to print.
6. Finally, the hardware setup of Canon Printer is successfully completed.
• Canon Printer Offline Setup
• So far, we have discussed all probable reasons for Canon Printer Offline problem.
• Let’s discuss fixing up of this problem with helpful solutions through the below-mentioned steps.
• Before discussing it further, uzers should chek plugging of their printer’s power cable into an electrical outlet
and then restart their router as this may cause due to network failure.
• The major steps for Canon Printer Offline Setup are: •
1. Restarting Printer Spooler service
2. Disabling Use Printer Offline feature of Canon printer and Cancelling all unfinished print jobs
3. Reinstalling Canon printer software
•
• Solution 1: Restarting Printer Spooler service
a. From the Start Menu, users should enter service in the search box. Now, do click Services (Desktop
app) from the result.
b. Next, users should right-click on Print Spooler. Now, do click Restart. If Restart option grayed out, then do
click Start instead.
c. Now, users should right-click on Print Spooler again and this time they should choose Properties. Now, do
set its Startup type to be Automatic and then click OK to save settings.
d. Finally, users should restart their PC and then try to print their file to check if their printer is working.
• Solution 2: Disabling Use Printer Offline feature of Canon printer and Cancelling all
unfinished print jobs
a. To begin with, users should enter control panel in the search box from Start. Now, do
click Control Panel (Desktop app) from the result.
b. Next, do click Hardware and Sound > Devices and Printers.
c. Now, users should find and right-click on your Canon printer under Printers catalogue. Now, do
choose See what’s printing.
d. Next, do click Printer to view if Use Printer Offline is unchecked. If it’s checked on with √ mark,
then do click it to uncheck.
e. Thereafter, do Click Printer again and this time click Cancel All Documents.
f. Finally, users should print their files to see if their Canon Printer is working properly.