Dattatray Digambar Gundu
Abhijit park A-2 Flat No.20, Vandeo Nagar
Thergaon, Pune-411033, Maharashtra, India
Email ID - dattagundu@gmail.com
Mobile No.: +91-7276211257
Objective
To work with an organization of repute where I can implement my Techno-managerial abilities,
experience & knowledge; for round the clock smooth operations of the facilities in the industries across
the oil & gas value chain.
Career Summary
B.E. Instrumentation with professional experience of Operation & maintenance, project execution,
preparation of technical specification for procurement and Safety operation, Inspection, Implementation,
Construction, Commissioning, an effective communicator with good presentation skills and abilities in
leading multi-functional teams & establishing beneficial relationships with key players in the industry in
City Gas Distribution.
Academic Credentials
Year
2017
2014
Course
B.E.- Instrumentation Engineering
Diploma In Instrumentation
University/Board
BAMU Aurangabad
MSBTE
%/Grade
62.02%
64.41%
2012
12th(Science)
Maharashtra State Board
52.00%
Maharashtra State Board
78.00%
2010
10
th
Work Experience
Company: Maharashtra Natural Gas Limited
Designation: Graduate Engineer Trainee in Operation and Maintenance Department
Duration: Feb-18 to till date (2 Years and 10 Months)
Job Description:















Ensuring round the clock safe and smooth operation of PNG Network. 
Monitoring & maintenance of Gas Chromatograph & flow computer
Monitoring & maintenance of Orifice meters, Turbine flow meters, RPD Meters, Ultrasonic metes &
mass flow meters, Flow transmitters.
SAP Skills-MM Module, PM Module, PS Module, Material Reservation, Service Entry of bills,
Reconnection, TD, PD Entries in SAP.
Responsible for Operation & maintenance of DRS Skid, MRS Skid, SR, Decompression Skid (Static
Equipment).
Responsible for manpower management of Emergency Response Team, Control Room.
Responsible for O&M, Laying, testing, project planning & control of underground & above ground
gas pipelines (Medium Density Polyethylene & Carbon steel line, GI).
Competent with pre-commissioning and commissioning procedure of Meter Regulating station for
industrial purpose.
Follow up with C & P Department for floating the tender as per prepared scope of work and hence
forth technical bid analysis as per Standards/BEC.
Handling Emergency team for providing online maintenance and leakage of MDPE pipeline network.
Responsible for improving the quality of maintenance activities considering health and safety
issues.
Technical evaluation & Site Inspection of various types of Metering skids, Meters, Regulator.
Maintaining records, periodical maintenance of equipment & pipelines, valves, handling Emergency
complaints of domestic/commercial/Industrial Customers, ensure safety of the pipeline & prevent
damage from third party.








Competent with laying & commissioning of MDPE laying, testing, commissioning, GI riser Erection
testing & customer conversion. Well conversant with standards used in gas distribution &
PNGRB guidelines.
Attending CNG rate change activity.
Preparing Action taken reports (ATRs) of the points from the Safety Audit of the sites.
Having knowledge of Smoke detectors, Heat detectors and Gas detectors.
Performing Pre-Commissioning Audit check, listing of any non–compliance observed and get it
done in the stipulated time frame, Successful commissioning of the Pipeline.
CNG online, Daughter booster station data monitoring. Preparation of daily progress report, gas
loss sheet, monthly closing stock.
Attending pipeline damages/fire/shutdown etc. Cleaning & maintaining of pits & valve pipeline
markers, test of leakage by using gas detector. Extension/modification/fresh laying of MDPE
pipeline.
Forecourt Management of Mother Station, DCS Station.
Company: Sedemac Mechatronics
Designation: Quality Control Engineer
Duration: Aug-17 to Feb-18 (6 Months)
Job Description:








Monitoring the quality of incoming and outgoing products or materials.
Reject all products and materials that fail to meet quality expectations.
Measure product dimensions, examine functionality and compare the final product to the
specifications.
Writing and reviewing testing plans.
Performing electrical tests that expose the product to increased temperature, vibration, and
pressure.
Investigating causes of defects that occur during the testing phase.
Reporting discovered defects to all relevant departments for correction.
Applying technical skills related to the product being tested.
Academic Projects
Degree Project: Automatic Engine Locking System for Drunken Driver
Team Size: 3 members
Duration: 1 Year
In this Project, we used the ATMEL ATMEGA8A microcontroller and MQ3 Sensor. When driver drinks
alcohol and gets ready to drive the vehicle, the alcohol is indicated in his breathing by the signal
generated by the alcohol sensor to the microcontroller. The microcontroller then gives the signal to the
motor to stop, starts the buzzer and display shows that ‘Alcohol is Detected, Vehicle is stopped’
Academic Trainings and Courses
1.
In plant Training at Thermal Power Plant in Parli Vaijanath for 7 days.
Following points are studied in training at Thermal Power Station:

Boiler Operation

Raw Material required for Energy generation

Chemical process and testing of water for steam generation.
2. 7 Days training course in Industrial Automation using PLC & SCADA.
3. LABVIEW
Codes & Standards
T4S regulations by PNGRB
OISD-179, OISD-226
 IS 14885



Soft Skills & Strengths




SAP PM, SAP MM, SAP PS Module
Good computational skills - MS office, Excel.
Strong communication, Dedication, Quick learner. 
Strong planning, problem solving and decision making ability
Personal Details
Date of Birth:
Languages Known:
Marital Status:
Interest:
2nd June 1994
English, Hindi & Marathi
Unmarried
Listening Music, Playing Cricket.
Date:
Place:
Mr. DATTATRAY DIGAMBAR GUNDU