LED Candle Bulb
But LED Candle Bulb will not soon replace energy-consuming hot tungsten filaments, glass vacuum
flasks, or energy-saving lamps of other designs. The reason for this is the relatively high cost of led bulbs.
Another brake on progress in the lighting industry is that LEDs emit a pulsating light that unpleasantly
irritates the eyes.
But this annoying drawback can be eliminated with the help of a simple electronic device consisting of
a diode bridge, a capacitor, and resistors.
The trouble is that each (!) LED Candle bulb has to be supplied with such an individual power supply. To
achieve the complete elimination of LED flicker, manufacturers add electronic controllers and miniature
transformers to the ice light bulb power supply. Of course, all this increases the cost of innovative lamps.
In addition, there is a lobby of manufacturers of incandescent lamps who do not want to convert
factories to create lamps using new technologies.
Choosing an LED Candle Bulb
LED l Candle Bulb to buy vying offers numerous online stores.
There are many models of LED light bulbs designed for a variety of applications.
Among them are designed where the LEDs are located on the same horizontal plane and create a
luminous flux going in one direction. They are good for table lamps, lamps that illuminate a small work
area.
More powerful lamps with an aluminum radiator, internal reflectors, and silicone optics are
designed for ceiling chandeliers. In this segment, corn lamps are popular, spreading light
in all directions.
 Before you buy LED Candle Bulb, read the online forums of their many fans and critics. There you
will learn about the properties, features, advantages, and birth defects of the LED light bulb. There
are quite a few video blogs with visual descriptions of different designs of LED lamps.
 So within an hour you can make an objective black list of manufacturers that have flooded the
market with low-quality goods, decide on brands that offer a product worth their money.
 On the blue eye
 For example, Chinese manufacturers on a blue eye, without any hesitation, indicate fantastic data
in the descriptions of their ice lamps, and in fact, the real lighting power is often less than the
declared one by two or even three times.
 However, it is possible to find out the real luminosity only with the help of test devices. This is not
difficult to do, but the light bulb will already be bought.
DIY repair
Unlike incandescent lamps, failed LED Candle bulbs can be quite easily repaired
and even upgraded. Of course, provided that you have some knowledge in the field of electrical
engineering. Here are some tips from the internet:
Keep failed ice lamps. They will serve as donors for LEDs and power supply parts.
Burnt-out LEDs can be carefully soldered, and serviceable ones from a donor lamp can be installed in
their place.
 When soldering LEDs, apply a soldering iron for no more than 1-2 seconds, otherwise, the LED will
overheat and burn out.
 Flicker is eliminated by selecting a capacitor with a gradual increase in its capacity.
 Power supply capacitors with a rating of fewer than 400 volts will inevitably burn out and must be
replaced.
 Overheating of the lamp can be eliminated by drilling a few holes in the silicone or plastic
protective bulb.
 On homemade forums, inventive home craftsmen share their observations and tips, talk about
original ideas and lighting options that only led bulbs or flexible LED strips provide.