LED Candle Bulb is replacing
But LED Candle Bulb will not soon replace energy-consuming hot tungsten
filaments, glass vacuum flasks, or energy-saving lamps of other
designs. The reason for this is the relatively high cost of led bulbs.
Another brake on progress in the lighting industry is that LEDs emit a
pulsating light that unpleasantly irritates the eyes.
But this annoying drawback can be eliminated with the help of a simple
electronic device consisting of a diode bridge, a capacitor, and resistors.
The trouble is that each (!) LED Candle bulb has to be supplied with such
an individual power supply. To achieve the complete elimination of LED
flicker, manufacturers add electronic controllers and miniature
transformers to the ice light bulb power supply. Of course, all this increases
the cost of innovative lamps.
In addition, there is a lobby of manufacturers of incandescent lamps who
do not want to convert factories to create lamps using new technologies.
Choosing an LED Candle Bulb
LED l Candle Bulb to buy vying offers numerous online stores.
There are many models of LED light bulbs designed for a variety of
applications.
Among them are designed where the LEDs are located on the same
horizontal plane and create a luminous flux going in one direction. They
are good for table lamps, lamps that illuminate a small work area.
More powerful lamps with an aluminum radiator, internal reflectors, and
silicone optics are designed for ceiling chandeliers. In this segment, corn
lamps are popular, spreading light in all directions.
Before you buy LED Candle Bulb, read the online forums of their many
fans and critics. There you will learn about the properties, features,
advantages, and birth defects of the LED light bulb. There are quite a few
video blogs with visual descriptions of different designs of LED lamps.
So within an hour you can make an objective black list of manufacturers
that have flooded the market with low-quality goods, decide on brands
that offer a product worth their money.
On the blue eye
For example, Chinese manufacturers on a blue eye, without any hesitation,
indicate fantastic data in the descriptions of their ice lamps, and in fact, the
real lighting power is often less than the declared one by two or even three
times.
However, it is possible to find out the real luminosity only with the help of
test devices. This is not difficult to do, but the light bulb will already be
bought.
DIY repair
Unlike incandescent lamps, failed LED Candle bulbs can be quite easily
repaired and even upgraded. Of course, provided that you have some
knowledge in the field of electrical engineering. Here are some tips from
the internet:
Keep failed ice lamps. They will serve as donors for LEDs and power
supply parts.
Burnt-out LEDs can be carefully soldered, and serviceable ones from a
donor lamp can be installed in their place.
When soldering LEDs, apply a soldering iron for no more than 1-2 seconds,
otherwise, the LED will overheat and burn out.
Flicker is eliminated by selecting a capacitor with a gradual increase in its
capacity.
Power supply capacitors with a rating of fewer than 400 volts will
inevitably burn out and must be replaced.
Overheating of the lamp can be eliminated by drilling a few holes in the
silicone or plastic protective bulb.
On homemade forums, inventive home craftsmen share their observations
and tips, talk about original ideas and lighting options that only led bulbs
or flexible LED strips provide.