blocklayer.com Directory ? 👈 Inch or Help Metric Search Home ♻ Wall Framing Baluster Spacing All Centers Spacing Hole Spacing Fastener Spacing Gable Spacings Gable Stud Lengths Kerf Spacing Wood Bending Woodturning Segments Directory Inch Inch Inch Inch Inch Inch Inch Inch Inch Circle Centers Paving Circles Masonry Arch Tile Fit Spacing Running Set-out Paling Fence Rails past Posts Panels or Palings Between Posts Arched Fence Paling Lengths Diminishing Lengths At Angle Inch Inch Inch Inch Inch Inch Inch Inch Inch Kerf Spacing Calculator for Bending Wood This calculator finds the spacing of the cuts (at entered dimensions), so when the piece is bent, the inside edges of each cut touch together to form the correct curve. The optimum depth of the cut, and thus remaining minimum thickness of wood to obtain the curve cannot be calculated. It depends on the type of wood, grain, dimensions etc. Test your dimensions and cut depth on pieces of scrap first, to perfect. Geometrically, more, closer and thinner kerf cuts should give a smoother curve -- Less and wider cuts may give a curve with segments having sharper bends at the kerf cut. Please let us know your experience re: optimal actual curves, using different wood, min thickness, kerf thickness etc, so we can try to improve this calculator. Curve Radius (outside) 1372 Curve Sweep Angle 47 Cut Width (blade thick) 1.7 Wood Thickness 40 ? Min Thickness 4 Colour Calculate Curve Radius Sweep Angle Cut Width Scale 20 Cuts of 1.7 mm @ 59.2 mm centres with 57.5 mm wood width between cuts Running Centres 0, 59, 118, 178, 237, 296, 355, 415, 474, 533, 592, 652, 711, 770, 829, 889, 948, 1007, 1066, 1125 Mark-out See Full Scale Ads? Arc Templates to print full scale arc template to mark curve, orBlue drag Scale slider Children's to 1:1 scale (if possible). Blocking - Please at least consider helping usout support Dragon Foundation OK!
