Trojan (Suzhou) Material Technology Co., Ltd.
Alpha 100 Manual Grinder Polisher
Product Description
Alpha-series is suitable for rough grinding, fine grinding and
polishing of metallographic/petrographic specimens. It is
widely used in material analysis/theory analysis laboratories of
large and small enterprises and scientific research institutions.
Features
(1) One-button flushing and cleaning, effective prevent the
obstruction causing by grinding debris；
(2) Fully sealed in bowl, never leakage, safe and reliable；
(3) Faucet can be switched to automatic mode, less operations
for manual grinding and polishing；
(4) Large diameter drain hose, not easy to blocking and
drainage quickly；
(5) Retractable water hose for easy cleaning and remaining；
(6) Optional glass operation panel, easy to clean and good at
sealing；
(7) Optional buttons operation panel, simple and practical for
using；
MN 60 Series Microscope
Product Description
MN 60 Series has been designed with modularity to meet
vairous industrial and materials science applications. It gives
users flexibility to build a system for specific needs.
Features
(1) Remote Control Pad：Objectives could be switched by
simply pressing the rotating buttons. Users could also
self-define two of the most commonly used objectives.User
could swap between these two objectives by pressing the
green button；
(2) Shortcut Buttons：With this shortcut button, the user could
switch 2 preseted objectives fast. Also, this shortcut button
could be set with other functions by user；
(3) ECO Function：The microscope light would be off
automatically after 30 minutes from operators leave. It can not
only save energy, but also save the lamp lifetime；
(4) With newly designed DIC module, the height difference of
a specimen which can not be detected with brightfield
becomes a relief-like or 3D image. It is ideal for the
observation of LCD conducting particles and the surface
scratches of hard-disk etc；
(5) In order to allow all operators to operate the equipment
comfortably, either a manual or an electric system can be
equipped with an angled viewing head；
(6) In order to make the system suitable forthe operating
habits of the operators，the knob of focusing and stage can be
adjusted to the left-hand side or right-hand side. This design
makes the operation comfortable；
(7) The microscope light would be off automatically after 30
minutes from operators leave. It can not only save energy, but
also save the lamp lifetime.