Curriculum vitae Curriculum vitae Curriculum vitae Curriculum vitae Curriculum vitae Curriculum vitae
Houssem ETTWIL
CONTACT & INFO
Full name: Houssem ETTWIL
LEEA APPROVED LIFTING INSPECTOR/SUPERVISOR Address : ELAmra (Mahdia Road km25) - 3046 - Sfax - Tunisia
Phones N°: +216 29831067/+222 44177349 / +216 25358700
QA/QC INSPECTOR / SUPERVISOR
E-mail : ettwilhoussem@gmail.com
NDT II INSPECTOR
Family
situation: Single
MAINTENANCE / MECHANICAL SUPERVISOR
Nationality:
Tunisian
B1, B2 & B3 Industrial Ministry of Tunisia
: www.linkedin.com/in/houssem-ettwil
approved INSPECTOR
06 to 07 YEARS OF EXPERIENCE
•
•
•
•
•
EDUCATION
2011 to 2014
02-06/2014
(4 months)
01/2013 (1 month)
01/2012
(1 month)
2010-2011
Degree in mechanical engineering
Institution: Higher Institute of Technological Studies of Sfax - ISET
Internship/Training:
• Superior Technician training:
Company: SOCOMENIN Sfax– Tunisia
Final project study:
Study and design of belt conveyor
• Technician training:
Company: SOCOMENIN Sfax– Tunisia
• Operator training:
Company: YAB “Agrifood Production Company” El Amra-Sfax
Bachelor Degree
High school: January 18, 1954 – Sfax
Section: Scientific And Technical Education
PROFESSIONNEL EXPERIENCE
05/2015 - Current days
Company: PIC PROCESS INSPECTION AND CONTROL , Part of Group IPS – Belgium
Web site: www.pic-inspection.com
Function: - QA/QC Inspector/Supervisor
- WELDING Supervisor
- NDT Level II Inspector
- MAINTENANCE Supervisor
- LEEA LIFTING Inspector/Supervisor
- Industrial ministry of tunisia Approved :
Lifting Inspector B3 – Electrical Inspector B2 - Gas Inspector B1
QUALIFIED TRAINING AND CERTIFICATION
Date
Organization providing training
Title of qualification awarded
01-02 / September / 2020
LLOYDS BRITISH Training Center, a LEEA accredited training provider
CCU Offshore cargo carrying units inspection and testing
Training Certificate ID: 2020-09-058-006 – Validity : 02 Years
Date
Organization providing training
Title of qualification awarded
05-06 / September / 2020
LLOYDS BRITISH Training Center, a LEEA accredited training provider
EOTC Electric Overhead travelling Crane inspection and testing
Training Certificate ID: 2020-09-059-006 – Validity : 02 Years
Date
Organization providing training
Title of qualification awarded
07-11 / September / 2020
LLOYDS BRITISH Training Center, a LEEA accredited training provider
Mobile and Crawler crane inspection and testing
Training Certificate ID: 2020-09-060-006 – Validity : 02 Years
Date
Organization providing training
Title of qualification awarded
14-18 / September / 2020
LLOYDS BRITISH Training Center, a LEEA accredited training provider
Offshore Pedestal carne inspection and testing
Training Certificate ID 2020-09-061-006 – Validity : 02 Years
curriculum vitae Page 1 I 10
QUALIFIED TRAINING AND CERTIFICATION
CONTINUED
Date
Organization providing training
Title of qualification awarded
21-25 / September / 2020
LLOYDS BRITISH Training Center, a LEEA accredited training provider
LEI Lifting equipment inspection and testing
Training certificate ID: 2020-09-062-006 - Validity : 02 Years
Date
Organization providing training
Title of qualification awarded
28-30 / September / 2020
LLOYDS BRITISH Training Center, a LEEA accredited training provider
LEI Lifting Equipment Powred Hoists and winches Inspection and testing
Training Certificate ID: 2020-09-063-006 - Validity : 02 Years
Date
Organization providing training
Title of qualification awarded
05-07 / October / 2020
LLOYDS BRITISH Training Center, a LEEA accredited training provider
FLT Forklift Truck inspection and testing
Training Certificate ID: 2020-10-064-006 - Validity : 02 Years
Date
Organization providing training
Title of qualification awarded
12-14 / October / 2020
LLOYDS BRITISH Training Center, a LEEA accredited training provider
MEWP Mobile Elevating Work Platform Inspection and Testing
Training Certificate ID: 2020-10-065-006 - Validity : 02 Years
Date
Organization providing training
Title of qualification awarded
11-12-13/August/2020 RENEWAL
ITC International training center Tunisia (OPPITO Approved training center)
T-BOSIET 5501 (Basic Offshore Safety Induction & Emergency Training)
Training Certificate ID: 93915501130814002 - Validity : 04 Years
Date
Organization providing training
Title of qualification awarded
14-15/April/2018
Personal Development Center « OPTIMISM » , Tunisia
Quality management system according to ISO 9001- 2015
Date
Organization providing training
Title of qualification awarded
Trainer
05-05/July/2017
SAVOIR PLUS Training Center Sfax : Tunisian accredited training center
Safety and fire prevention
Mr. Mohamed BEN SALEM : CFTP FORMER EMPLOYEE
Date
Organization providing training
Title of qualification awarded
Trainer
10-11-16-17-18/June/2017
PROFESSIONAL CONTROL AND INSPECTION Training Center Sfax
Inspection of residential, and industrial buildings gas installations
Brahim Trabelsi : STEG Tunisia EMPLOYEE
Date
Organization providing training
Title of qualification awarded
Trainer
05-11-12/March/2017
SAVOIR PLUS Training Center Sfax : Tunisian accredited training center
Regulatory inspection and control of Lifting equipment
Mr. Monji MAALEJ : APAVE TUNISIA FORMER Technical manager
Date
Organization providing training
Title of qualification awarded
Trainer
23-24-30-31 July 2016 and 6-7 August 2016
SAVOIR PLUS Training Center Sfax : Tunisian accredited training center
Examination, protection condition and control of electrical installations HVLV
Mr. Monji MAALEJ : APAVE TUNISIA FORMER Technical manager
Date
Organization providing training
Title of qualification awarded
Trainer
11-12-13 January 2016
National center for radioprotection in Tunisia CNRP
Safety Radiation-protection Certificate
Mr. Fawzi BEN SLIMEN: Professor, Doctor and director of the National
Center for Radiation Protection of Tunisia
curriculum vitae Page 2 I 10
QUALIFIED TRAINING AND CERTIFICATION
CONTINUED
Date
Organization providing training
Title of qualification awarded
27/06/2015 to 10/07/2015
CIFA : Cabinet International de Formation d’étude et Assistance - Tunisia
RT (Radiographic Testing) level 2 COTEND according to ISO 9712 and EN 473
Date
Organization providing training
Title of qualification awarded
Trainer
23/11/2020 to 22/11/2023 RENEWAL
Quality control Co. SIS of ASNT & VERDA Inspection and Consulting
• MT (Magnetic Testing) level 2 according to ASNT-SNT-TC-1A
• PT (Liquid Penetrant Testing) level 2 according to ASNT-SNT-TC-1A
• RT (Radiographic Testing) level 2 according to ASNT-SNT-TC-1A
• UT (Ultrasonic Testing) level 2 according to ASNT-SNT-TC-1A
Mr. Naoufel WALHA: ASNT Level III Inspector and Trainer
Date
Organization providing training
Title of qualification awarded
15/02/2014 to 17/04/2014
ITL Training center - Sfax
English communication Certificate
Date
Organization providing training
Title of qualification awarded
08-09/2014
ITL Training center - Sfax
• TEKLA STRUCTURE software training certificate
• SOLIDWORKS software training certificate
WORK EXPERIENCE AND SKILLS
• Non Destructive Testing - NDT
Perform NDT testing VT, PT, MT, RT and UT in accordance with ASNT standards and customer specifications.
• QA/QC Inspection
Perform surveillance, inspection, monitoring of shop and Field activities in accordance with the Projects
specifications and relevant standards.
• Lifting Equipment Inspection – LEEA Approved Inspector
Carrying out Periodic safety inspection and Load testing to maintain quality assurance during the entire cycle of
life of lifting equipment and accessories such as Ship to shore cranes, offshore cranes, forklift trucks, CCU, etc.
• Mechanical Supervision
Provide skilled mechanical work in troubleshooting, repairing, and maintaining a variety of mechanical,
hydraulic, and electrical systems
• Static and Rotating Equipment Inspection
Check and inspect static/rotating equipment to ensure it is in excellent working order and meets the criteria of
the project.
• Steel Structure Inspection
Carried out assigned inspections to give a detail insight of the structural integrity, identify any deterioration or
potential hazards.
curriculum vitae Page 3 I 10
WORK EXPERIENCE AND SKILLS
• Hydrostatic and Pneumatic Testing
Witnessing and conducting hydrostatic and pneumatic testing to quickly and accurately discover leaks
in pressure vessels, pipes, valves, BOPs, risers, etc.
• Mechanical Testing
Expertise with local and international standards for witnessing and conducting destructive materials
testing to enhance the credibility in the global infrastructure.
• Painting Inspection
Oversee the painting and coating of a wide range of products including pipings tanks steelworks, etc.
and to help identify the cause of why the majority of industrial paint an d protective treatment failures
occur.
• Welding Inspection
Inspecting and assessing the quality and strength of welding work to ensure welds are safe and ready to function
as part of the device or structure with advanced knowledge of modern welding procedures, a good eye for
detail, and A top-class to quickly spot welding flaws and unsafe procedures on the work floor.
• Electrical Installations Inspection
Undertake Periodic, preventive, and statutory inspections on electrical installations to analyze their safety,
efficiency, and compliance with electro-technical regulations, codes, and standards.
• Gas Installations Inspection
Perform periodic examination, tests, and certify that the gas installations in residential, commercial, and
industrial buildings are still safe and comply with the established codes.
• Fire protection equipment and systems Inspection
Conduct periodic inspection and testing as the best defense against system failure for the secure and efficient
operation of projects.
• CAD Modeling and Design
Performs a variety of design/drafting activities group including preparing/updating installation drawings for
projects, preparing assembly/manufacturing drawings, establishing guidelines and procedures for CAD data
management, and managing workload distribution within the CAD department.
curriculum vitae Page 4 I 10
SELECTED PROJECTS
1/6
DATE
CLIENT/ OWNER
PROJECT / INSPECTION DETAILS
28/09/2021
To
Current Days
Clients / Owners:
Project : Development and construction of a new terminal container
Location: Port "l‘Amitié", Main new berth, Nouakchott, Mauritania
Position: TP Mechanical supervisor, Lifting and NDT Inspector
Responsibilities:
• Ultrasonic testing of STS crane rail joints type CR120.
• Ultrasonic and Radiographic testing of under berth transportation
pipeline in line with ASME B31.3.
• Supervision of Electrical & Mechanical Installation and
Commissioning of (x2) ZPMC 75 Ton STS/Container Cranes.
• Load test and thorough examination of:
(x2) STS Cranes, (x4) RTG Cranes, (x15) Terminal tractors, (x5) Forklift
Client/ Owner:
Project 1 : 3 Years contract Periodic lifting equipments inspection
Location: Tasiast mine site, Mauritania
Position: Lifting and NDT Inspector
Responsibilities:
• Test and thorough examination of:
o56 Lifting machines (All types Cranes, Forklifts, MWEP, etc.)
o232 Lifting equipments (Lever hoists, chain blocks, etc.)
o1746 Lifting accessories including wire rope slings, shackles, Chains
hoists, Master links, etc.
• Load test
• MPI Inspection
Project 2 : Rehabilitation of fire-damaged SAG Mill steel structure
Location: CIL Plant, Tasiast site, Mauritania
Position: Multi-discipline Inspector (QC, NDT, Structure, Mechanical)
and Team Leader
Responsibilities:
• Analyze configurations of the basic components of a structures
• Make drawings, specifications and computer models of structures
• Examine the fire-damaged structures and advise how to improve
their structural integrity
• MPI Inspection of fire-damaged cyclone critical areas
• Hardness testing of heat treating surfaces
• Wall thickness measurement
• Painting inspection of fire-damaged structure
• Dimensional inspection of the main structure for deformation
• Construction/Quality control inspection
• Others assigned works
(Mauritania)
22/04/2021
To
Current Days
(Mauritania)
KINROSS TASIAST
MAURITANIA
07/12/2020
To
1/11/2021
Client:
(Mauritania)
Owner:
JDN Vessels:
Simon steven
Pinta
Adhémar de Saint-Venan
Willem Van Rubroeck
Project : BP Greater Tortue Ahmeyim Phase 1, Offshore Mauritania
Location: All involved JDN Vessels, Offshore Mauritania
Position: Lifting and NDT Inspector
Responsibilities:
- Test and thorough examination of lifting equipment and gears used
on both vessels bord and port’s yards and berths:
• Offshore cranes, Rough terrain cranes, Forklifts trucks, Terminal
tractors, ISO Containers, Telehandlers, Reach stackers, etc.
• Liftings accessories: Slings, shackles, clamps, Manbaskets, etc.
- Inspection of excavators grabs buckets welding repair, UT and MPI
inspection
- Ultrasonic testing of offshore crane boom mast (Welds repair)
curriculum vitae Page 5 I 10
SELECTED PROJECTS
2/6
CONTINUED
DATE
CLIENT/ OWNER
PROJECT / INSPECTION DETAILS
20/09/2021
To
24/09/2021
(Mauritania)
Client/ Owner:
Project : Development and construction of a new container terminal
Location: Port "l‘Amitié", Main new berth, Nouakchott, Mauritania
Position: TP Mechanical supervisor, Lifting and NDT Inspector
Responsibilities:
Load test and thorough examination of 150 metric Ton dynamic
mooring systems according to Directive 2014/68/EU and code for
lifting appliances in a marine environment.
01/12/2020
To
06/12/2020
Client/ Owner:
Project : Periodic inspection of lifting equipments and accessories
Location: Port "l‘Amitié", Nouakchott, Mauritania
Position: Lifting Inspector and NDT Inspector
Responsibilities:
Test and thorough examination of:
• Lifting equipment: (x4) Mobile Harbour cranes, Rough terrain
cranes, Forklifts, Reach stackers, Empty container handlers,
Terminal tractors, Trailers, Lever hoist, Chain blocks, etc.
• Lifting accessories: Lifting Spreaders, CCU, Slings, clamps, Lifting
bolts and nuts, Shackles, Fall arrestors, Tripod, Safety harness, etc.
• MPI inspection before and after load test
Contractor:
PGS Systems
Project 1: Construction of petroleum station on Jorf-Lasfar, which
contain 3 x Gasoil loading skids and 2 x Jet A1 loading skids
Project 2: Fabrication of 11 water and chemicals products injection
skids (including Storage tanks 47m3 and filtration units)
Project 3: Supply, installation of 4 additives skids to the petroleum
station , horizon tangier terminal s. a
Location: PGS Systems Workshop – Tunisia, Morocco
Position: Quality Control Inspector (Under helmet of PGS Systems)
Responsibilities:
• Review of Inspection & Test Plans, Quality Control procedures,
Method statements, Welding Procedures etc.
• Monitoring / Witnessing all the Welding, Fabrication & Erection
related activities as per client approved Inspection & Test
Plans/Quality Control procedures.
• Inspection of incoming materials (Pipe, Beams, Tubing, valves,
Pumps, Mixers, …) and reviewing test certificate as per code
• Inspection of piping and tubing materials identification as per
isometric drawings.
• Witnessing of activities like PQR, Welder’s qualification Tests,
Mechanical testing and preparation of PQR records and WQT
certificates.
• Review of radiographic films, Witnessing of UT, MPI, DPI, Hardness,
PWHT and review of test reports.
• Review of Daily Welding reports & Welding Pipe book.
• Line walk and Punch List preparation before Hydro Test
• Verification of Reinstatement of Piping systems after completion of
all hydro testing activities
• Issue of Non- conformance reports & verification of
Corrective/Preventive action
(Mauritania)
06/2020
To
09/2020
Owner Project 1 :
OLA Energy, Morocco
Owner Project 2 :
Groupement Sonatrach
Agip GSA, Algeria
Owner Project 3 :
HTT HORIZON
TERMINALS, Morocco
curriculum vitae Page 6 I 10
SELECTED PROJECTS
3/6
CONTINUED
DATE
CLIENT/ OWNER
PROJECT / INSPECTION DETAILS
01/04/2019
To
15/03/2020
Owner: GICA Group
Algeria
Mega Project : 3rd Production line 6000 Ton/Day of Clinker
Location: CHLEF Cement plant-Algeria
Position: Construction supervisor
Responsibilities (Included some of palnner’s responsibilities):
• Ensure that projects progress at an optimum level with a minimum
of downtime.
• Review and provide comments on construction method statements
• Maintain healthy and safe work environment by enforcing
procedures and standards and complying with legal regulations
• Conducts quality control inspections on project sites
• Ensuring that contractor activities are properly coordinated.
• Plan and coordinate of project activities to develop and implement
procedures, processes and systems.
• Supervise sub-contractors by selecting and evaluating them as well
as monitoring and controlling their performance
• Meet operational standards by resolving problems, contributing
information to strategic plans, and identifying improvements
• Study and evaluate the work sequences and methods of the
Department and explore new ideas to improve quality and
productively
• Preparing schedules, work progress, production and other reports
• Performs other duties as described under Construction manager
(Algeria)
Contractor:
FIVES FCB France
01/02/2019
To
01/04/2019
Sub-contractor:
Contractor:
Owner:
01/12/2018
To
15/01/2019
(LISCO Plant Lybia)
Owner: LISCO
Project : Construction of combined cycle power plant
Location: Socomenin Workshop-Sfax / STEG Rades- PZ Tunis
Position: QC Inspector (Under helmet of SOCOMENIN)
Responsibilities:
• Raw material Receiving Inspection
• Perform routine surveillance, Visual & Dimensional inspection of
more than 24000 inches Shop-welds
• Monitoring work for compliance with approved shop drawings
and specifications (ITP, RFQ, WPS, …)
• Prepare daily NDT Programs
• Interpreting and evaluating of NDT results (RT+PT)
• Update welding book, Drawings, welds-map, …
• Supervision of welding, sand-blasting and painting activities, …
• Carry out Inspection and Monitoring with GAMA and STEG
Representatives
• Final Release and Signing Off
Project: G4&H3 Area piping replacement and repair
Mission: QC and Multidisciplinary inspection
• Welding and painting supervision
• Performs examinations, inspections as required by project
management such as Ultrasonic testing, DFT measurement, Visual
inspection in order to locate pipes damage and corrosion
• Assists management in establishing project requirements for
selecting the proper procedures and techniques for project
quality control in pipe/welding segment of the project
• Carry out continuous monitoring for quality and compliance to
project data sheets, standards, and specifications
curriculum vitae Page 7 I 10
SELECTED PROJECTS
DATE
30/08/2018
To
15/11/2018
4/6
CLIENT/ OWNER
Sub-contractor:
Contractor:
Owner:
28/05/2018
To
28/07/2018
Sub-contractor:
Contractor:
Owner:
CONTINUED
PROJECT / INSPECTION DETAILS
Project : Construction of new lubricants manufacturing plant
Location: Socomenin Workshop-Sfax / TOTAL Oran-Algeria
Position: Piping QC Inspector (Under helmet of SOCOMENIN)
Responsibilities:
• Raw material Receiving Inspection
• Perform routine surveillance, Visual & Dimensional inspection of
more than 22000 inches Shop-welds
• Monitoring work for compliance with approved shop drawings
and specifications (ITP, RFQ, WPS, …)
• Interpreting and evaluating of NDT results (RT+PT)
• Update welding book, Drawings, welds-map, …
• Supervision of welding, sand-blasting and painting activities, …
• Carry out Inspection and Monitoring with ENGIE and TOTAL
Representatives
• Final Release and Signing Off
Project : Construction of new inlet gas compression station LYG213
Location: Socomenin Workshop-Sfax / WAFA FIELD Libya
Position: Piping QC Inspector (Under helmet of SOCOMENIN)
Responsibilities:
• Perform routine surveillance, Visual & Dimensional inspection of
more than 48000 inches Shop-welds
• Monitoring work for compliance with approved shop drawings
and specifications (ITP, RFQ, WPS, …)
• Interpreting and evaluating of NDT, witnessing hardness test,
and PWHT
• Update welding book, Drawings, welds-map, …
• Supervision of welding, sand-blasting and painting activities, …
GPS /
MABROUK OIL
OPERATION MOO &
TOTAL LYBIA
Project 01: Shut down & Short term water de bottle necking solution
Mission: Radiographic inspection of 2inch flare line after PWHT
Project 02: 18’’ Offloading line repair and construction of new frame
Mission: NDT inspection of field welds
35 Tons Load test of the new frame
Painting inspection as per owner requirement
Project 03: Water ballast tank coating repair WB.1S 3640 m³
Mission: HSE assistant & site supervisor
Painting inspector
Lifting and Scaffolding inspector
08/09/2017
To
24/01/2018
STEG GAFSA-Tunisia
Project: Supply of natural gas pipeline for the industrial zone of
METLAOUI (GAFSA)
Mission: Preparation of WPS, WPQ and PQR
Mechanical test witnessing as per STEG&API1104 requirements
Radiographic testing of 6 kilometers 4inch pipeline
26/08/2017
To 11/04/2018
GPS / MABROUK OIL
OPERATION MOO
Project: Short term water de bottle necking solution –FPSO FARWAH
Mission: Piping QC Inspector:
• Preparation of welding book / map, WPS, WPQ and PQR
• Third party inspector of PostWeld Heat Treatment& hardness test
• QA/QC Inspection & Painting - Welding inspection
05/02/2018
To 18/04/2018
Al Jurf field
FARWAH FPSO
Lybia
Al Jurf field
FARWAH
Lybia
curriculum vitae Page 8 I 10
SELECTED PROJECTS
5/6
DATE
CLIENT/ OWNER
19/05/2017
INAP/ MAZARINE
ENERGY
To 22/10/2017
CONTINUED
INSPECTION DETAILS
Project 01: Construction of inlet manifold
Project 02: Construction of pig launcher and related piping
Project 03: Construction of pig receiver and related piping
Project 04: Construction of Gas scrubber and related piping
Mission:
• Preparation of WPS, WPQ and PQR
• QA/QC Inspection
• Radiographic examination of butt welds 2” 6” and 8”
• Penetrant examination of nozzles
• Lifting inspection and load test of 04 skids
08/2016
To 08/2017
INAP/ WEATHERFORD
Project: Manufacture and supply of Special 04 Rig camps
Mission: QA/QC inspection & NDT inspection & Lifting inspection Of:
• 119: 20’ and 40’ accommodation containers
• 10: storage tank (24m³ + 10m³)
• 50: Master skids
06/01/2017 to
02/02/2017
INAP / EXPRO Algeria
Project: Separator px1-003 pipe line modification
Mission: QA/QC Inspection
Radiographic & magnetic testing of: 184 butt & fillet welds
Lifting inspection: load test of separator skid
13/08/2016 to
01/01/2017
MERI / GTP Algeria
01-02/2017
AcoServ / SODEPS
Project: Construction of KRDSW 01 Flow line TIE-IN 4” 6 Kilometers
Mission: Radiographic testing of 6 Kilometers 4inch pipeline
Location: Desert Tunisia
01/2016 to
06/2016
AEC / Thyna Petroleum
Services
Project 01: Construction of new pipeline from Guebiba /TB to CFTP
Mission : Radiographic inspection of pipeline 8” 35 kilometers
Project 02: Construction of new water tank T3
Mission : Radiographic & penetrant testing of butt welds
Topographic measurement and leak test witnessing
(06 months)
09/2015
to 01/2016
Client : GCER & BRI
(04 months)
Owner: Arcelormittal
Algeria
07/2016
TRAPSA
Project: Construction of 02 Scraper station 16” 20”
Mission: QA/QC Inspection
NDT inspection of butt and fillet welds
Hydro test assistance
Project: REHABILITATION OF AGGLOMERATIONS - Arcelormittal
steel complex of El-Hadjar – ANNABA - Algeria
Mission : NDT and QA/QC INSPECTOR
• Preparation of ITP and Review of RFQ
• Welders performance qualification
• Preparation of WPS and PQR
• Preparation of Welding register and welds maps
• Magnetic particle testing
• Liquid penetrant testing of metallic structures
• Painting and sandblasting Inspection
• Dimensional inspection and preparation of As-built drawings
Mission:
Ultrasonic testing of tank bottom
Vacuum box test of tank bottom N°S-4
Gas detection
curriculum vitae Page 9 I 10
SELECTED PROJECTS
6/6
CONTINUED
DATE
CLIENT/ OWNER
INSPECTION DETAILS
09/2016
INA / BG T - OMV - ENI
Mission BGT:
Hydro test assistance of manifolds , risers and gates valves 5"1/8 10k
Project OMV : MONA WELL HOOK-UP
Mission OMV : Penetrant examination of barred tee 4” x 4’’
Mission ENI : Heat exchanger 210HR-001 Penetrant examination
24/01/2017
08/03/2017
09-10-11/2016
BAKER HUGHES /
EJCOM
11/2016
INAP / CTF
05/2015
MERI / SNDP
2015
2016
2017
2018
2019
2020
Project: LEGAL PERIODIC REGULATORY CONTROL
Mission: NDT inspection & lifting inspection of :
Shelves + Exhausts Silencer + Generators container + Garbage skip
Crane jibs + lifting appliances + …
Project : Construction of new diesel tank
Mission : Load test & NDT inspection
Project : Construction of new fire water tank
Mission : Radiographic & penetrant inspection
Hydro test and topographic assistance
Schlumberger: Electrical installations inspection
Sofpince : Electrical installations inspection
Forklift inspection
AciaSud : Forklift inspection
Over head cranes inspection
Lifting Beams & spreaders inspection
SBF société bouzguenda frères : Over head cranes inspection
Electrical inspection assistance
MEDLIGHT: Electrical installations inspection
Forklift inspection
TBH + ALFA :Lifting (crane + forklift + sling …) inspection
EJCOM + GPS+ GLOBAL GROUP : Lifting equipment inspection
STEG + EJCOM + EMP Engineering and machine precision:
Welding machine verification + welders qualification + PQR + WPS
LANGUAGES
English : Good
French : Good
Arabic : Native
COMPUTER SKILLS
•
•
•
•
•
•
Microsoft Office 2017 (Excel, Word, …)
MS Project
AutoCAD
SolidWorks
Tekla structures
Catia
OTHER :
Driving license (B)
curriculum vitae Page 10 I 10