Plastic Surgery Key
Fastest Plastic Surgery & Dermatology Insight Engine
Home
Categories »
More References »
About
Contact
Gold Member
Search...
Harvesting Bone Graft from the Iliac Crest
10.1055/b-0034-99038
Harvesting Bone Graft from the Iliac Crest
Autogenous bone is needed for the reconstruction of defects or to correct cosmetic deformities. Along with the tibia, fibula, scapula, and ribs, the iliac
crest is among the most common donor sites for autogenous bone. It can furnish extremely large grafts, which are usually taken in the form of
compound or composite flaps that include soft-tissue elements (see Fig. 14.2 ).
Indications:
Cancellous bone chips are used as filling material for mandibular reconstructions and bone cysts, and composite corticocancellous grafts of various
sizes are used to correct facial contour deformities, augment the nasal skeleton, and replace portions of the mandible (see Fig. 15.3 ).
Position:
The patient is placed in the supine position, with the hip (generally the right one) elevated on a cushion.
Approach:
The somewhat thicker portions of the iliac crest (~1.3–1.7 cm in diameter) are located in the anterior third between the anterior superior iliac spine (
Fig. 15.1a , 3) and the iliac tubercle ( Fig. 15.1a , Tub). The iliac spine is preserved anteriorly. An assistant presses down on the skin medial to the
iliac crest, so that the incision, and later the scar, will be lateral to the site where the bone graft is harvested. The incision should not be carried
anteriorly past the iliac spine, to avoid injury of the lateral femoral cutaneous nerve, as this would cause anesthesia or hypesthesia on the anterolateral
thigh ( Fig. 15.1b ). The incision over the anterior iliac crest extends through the skin and subcutaneous tissue down to the periosteum. The length of
the incision depends on the length of bone graft that will be removed.
a, b Iliac crest bone graft. a Position of the patient. Pressing down on the abdominal wall draws the skin medially across the iliac crest, positioning the
incision and scar lateral to the crest. The diagram shows the inserting muscles, which are partially detached along with the periosteum. 1 Internal and external
oblique muscles. 2 Tensor muscle. 3 Sartorius muscle; sas = anterior superior iliac spine. 4 Gluteus minimus muscle. 5 Gluteus medius muscle. 6 Gluteus
maximus muscle. (Tub = iliac tubercle) b Sensory nerve supply of the leg (in the standing patient). 1 Iliohypogastric nerve. 2 Lateral cutaneous branch. 3
Anterior cutaneous branch. 4 Lateral femoral cutaneous nerve. 5 Ilioinguinal nerve. 6 Inguinal ligament. (sas = anterior superior iliac spine; S = incision)
a, b a The periosteum is incised laterally, and the iliac crest is raised with an osteotome, leaving it hinged medially on periosteum and muscle. b With the
cortical cap opened, a straight osteotome is driven along the inner and outer tables of the iliac crest, and a transverse osteotomy is added to free the cancellous
bone block.
Harvesting of large two-layer and three-layer grafts. 1 Graft for hemimandibular reconstruction. 2 Graft for anterior mandibular reconstruction sas =
anterior superior iliac spine; Tub = iliac tubercle; today this graft has been superseded by the fibular graft or pedicled iliac crest graft, see Fig. 14.2 ).
Harvesting cancellous bone (Fig. 15.2):
The periosteum is first incised along the lateral edge of the iliac crest. Then it is incised transversely behind the iliac spine and anterior to the tubercle,
and the bone is divided transversely with an osteotome, to a depth of ~0.5 cm ( Fig. 15.2a ). On the lateral side, the upper portion of the iliac crest is
divided with a straight osteotome and fractured on the medial side. This forms a cortical cap that is hinged medially on the periosteum and attached
muscles, and can be opened like a trapdoor to expose cancellous bone ( Fig. 15.2b ).
The straight osteotome is advanced down along the inner surface of the inner and outer tables of the iliac crest, and a transverse osteotomy is made
behind the spine and in front of the tubercle. An osteotome curved on the flat is then used to cut through the base of the cancellous block ( Fig. 15.2b
). Harvesting of the cancellous bone is followed by meticulous hemostasis, in which bleeding sites in the bone are first cauterized and then occluded
with fibrin glue or bone wax. The outer and inner tables may be fractured toward each other slightly, to reduce the size of the donor cavity. The cavity
is packed with blood-soaked fibrin foam or collagen sponge, for example. The cortical cap is returned to its original position, the periosteum is
reapproximated with sutures, and the wound is closed in layers. Suction drainage is essential to prevent hematoma formation. Two continuous-suction
drains should be used. One is placed at the bone graft donor site, maintaining suction for only ~30 minutes, to prevent excessive blood loss; the other
is placed in the soft-tissue mantle, where suction is maintained for 2 to 3 days. The cancellous bone can also be harvested with sharp curettes.
Harvesting corticocancellous bone (Figs. 15.3 and 15.4):
Corticocancellous bone can be obtained from various regions of the iliac crest, depending on the necessary graft size ( Fig. 15.3 ).
1. Small grafts ( Fig. 15.3 ): the border of the iliac crest is an excellent donor site for small grafts used to reconstruct the nose, orbital ring,
or facial contours. The periosteum is incised along the center and dissected from the inner and outer tables, according to the necessary graft
size. The graft is harvested with a straight osteotome or saw ( Fig. 15.4a ). After meticulous hemostasis, the periosteum is closed with
absorbable sutures, and the wound is closed in layers over a suction drain.
2. Larger corticocancellous grafts ( Figs. 15.3 and 15.4 ): the desired graft size will determine whether it is necessary to strip the medial
periosteum with the iliac muscles, the lateral periosteum with the attached gluteal muscles, or the periosteum on both sides. The inner table
is easier to expose, and larger corticocancellous grafts should be taken from the inner table whenever possible ( Fig. 15.4b ). This leaves the
outer table with the gluteal muscle attachments intact. The anterior superior iliac spine with the tensor fasciae latae attachment should also
be preserved. The grafts can be harvested with straight and curved osteotomes, or with a motorized saw. After the desired grafts have been
obtained, the bone edges are rounded off with burs, rasps, or ronguers. A three-layer (full-thickness) corticocancellous graft can also be
harvested, and again it is recommended that the superior border of the iliac crest be preserved ( Fig. 15.5 ). In selected cases, bone from
the posterior iliac wing can also be used.
a, b a A small cortical bone graft is obtained from the iliac crest after stripping of the periosteum. The anterior surface of the iliac spine should be preserved
(tensor fasciae latae). b A two-layer graft (dotted line) is taken from the inner table after periosteal stripping. The anterior surface of the iliac spine should be
preserved.
A three-layer corticocancellous graft has been removed with preservation of the iliac crest, which is reattached after graft harvest. The iliac crest segment
should be slightly larger than the graft.
Hemostasis:
Heavy bleeding, especially from the cancellous bone, requires meticulous hemostasis. This can be accomplished with bone wax and suction drainage
(see above). Donor cavities are packed with blood-soaked fibrin foam or similar material. Blood loss in excess of 500 mL is not unusual.
Wound closure:
The wound should be closed in layers. When large bone grafts have been obtained, the iliac muscles can be sutured to the gluteal muscles over the
iliac wing, and the medial and lateral periosteum are sewn together with heavy sutures.
Complications:
1. Hypesthesia or anesthesia on the medial surface of the thigh can occur if the surgeon did not keep strictly below the periosteum while
working on the inner table ( Fig. 15.1b ; cutaneous branch of iliohypogastric nerve, ilioinguinal nerve), or if the lateral femoral nerve has
been injured ( Fig. 15.1b ).
2. Grating of the fascia lata over the trochanter can cause friction sounds during walking because the surgeon neglected to reattach the tensor
fasciae latae to the lateral aspect of the iliac spine ( Fig. 15.1b ).
3. Perforation of the abdominal cavity during removal of graft from the inner table requires immediate closure in layers.
4. A hernia may develop if the medial and lateral muscles are not sutured together after a large graft has been harvested from the iliac wing.
Crockford and Converse (1972) suggested that graft harvest be limited to the outer table behind the anterior superior iliac spine in children
aged over 2 to 3 years.
5. Atrophy of the gluteal muscles (medius and minimus) can develop if the lateral periosteum is not repaired after graft harvest ( Fig. 15.1a ).
6. The technique of preserving the pelvic brim ( Fig. 15.5 ) should be practiced, to avoid contour changes in the iliac wing (Laurie et al. 1984).
7. Scars directly over the iliac crest can lead to problems when wearing belts, girdles, or the like. Also, the scars may be cosmetically
objectionable in women, and hypertrophic scars may require later revision.
8. Pain generally lasts from 4 to 6 weeks but may persist longer in some cases.
You may also need
Free Flaps
Harvesting Split Calvarian
Bone Graft
Rib Cartilage
Forehead Region
Basic Principles of Facial
Surgery
Deltopectoral Flap
Dermabrasion
Myocutaneous Island Flaps
Load more posts
Share this:



Jun 15, 2020 | Posted by drzezo in Reconstructive surgery | Comments Off on Harvesting Bone Graft from the Iliac Crest
WordPress theme by UFO themes