How to use combustion analyzers
Greenhouse effect! a very familiar word, isn't it? Do you know which gas is responsible for this? Prime
Culprit is Carbon Dioxide. An increased level of CO over 150 ppm may cause death.
Now the burning question is, what to do with industrial plants and combustion processes that produce
CO and hazardous wastage? Well, we have combustion analyzers to monitor it. Although you must
need a combustion analyzer review to know how to use combustion analyzer properly! Let's go
through it.
What is a combustion analyzer?
A combustion analyzer is an essential tool for combustion plants and furnaces. This is used for various
intents. Do you need to measure flue pressure or stack temperature? Combustion analyzers are always
there at your service.
Why is it necessary?
Our heavy types of machinery often produce mechanical issues. So, it is necessary to maintain a
proper level of fuel. Proper temperature control is also necessary. Helping on those jobs, the
combustion analyzer offers pieces of machinery a long lifespan with proper monitoring. You can use
them in wood, oil, gas plants, boiler & heater also. Regarding safety measurement, a combustion
analyzer is an important component of your toolbox. It will ensure you low cost with safety.
Components
Combustion analyzer, the Swiss army knife of its field, has a few components to provide multiple
functionalities. Including★Keypad
 Power button: To turn the device on or off
 Navigation keys: To cycle through measurement values on the screen.
 Backlight button: For Better screen visibility adjustment
 Print button: For printing the data.
 & Home key
★Function keys: Start/ stop measurement, select any settings
★ An worthy display that presents all information.
★Batteries
★Printer
★Flue gas probe with probe cone
★Silicone hose.
Use it: The "How to"
At first, install your batteries. However, if it contains rechargeable batteries than charge it near about 8
hours. Hold the power button for 3 seconds. Now, the tool is available for use. On topmost section of
the screen, there are 4 symbols. Use the function key to select the measurement. A good combustion
analyzer ordinarily gets 4 determinations.
 Flue gas test
 Ambient CO test
 Draught measurement
 Differential pressure measurement.
Perfect fitting with the probe is necessary to connect the device with the measurement area. The box
contains a silicone hose that has to be attached to the probe. You need to make sure that the whole
probe opening is covered. Settle other ends of the silicone hose to the measuring point. The
measurement point should be selected conveniently. Hold the power button to get the device ready for
measurement. If the device is measuring for the first time, it is necessary to select area, time, date &
language. You can select them using navigation keys. Give it a standard zeroing on fresh air. It may
take 30 to 60 seconds to warm up. Choose a correct fuel type, like- propane/ biomass / wood. Carry out
the measurement. The probe should remain still. After completing the measurement, press the print
button and receive your measurement printed. Does your screen show a sign " plug up"? Then it is
necessary to replace the filter. On the back of your probe handle, there is a plastic cap to rotate counterclockwise to unlock. Inside this, you will find a comb. Replace it with another one. In case of
continuous use, it will accumulate moisture which is visible through the view window. Remove the
moisture or drain the liquid by pulling the plug. You will find it at the top of your device. Never miss
sealing the plug carefully. Otherwise, it will cause measurement error by pulling air.
Safety precaution
 Cigarette smoke may interfere with the measurement result
 It has a magnetic holder. So keep it away if the user carries an artificial pacemaker.
 During storage, the battery should be charged from time to time.
 Excessive cold or warm weather may cause a short lifespan.
 Be careful about the accumulated moisture, it may become frozen in cold weather. So clean it
carefully.
 Draft measurement shouldn't take more than 5 minutes. Otherwise, it will exceed the tolerance
limit of the sensor and start drifting.
Today, our world is tired of universal pollution. Ensuring proper use of fuel has become our essential
responsibility. In this field, the role of a combustion analyzer is very important. Defective mechanical
systems always put your health at risk. So we have to know the correct use of a combustion analyzer to
make the equipment safe and easy to use in factories, even in houses. This combustion analyzer review
will guide you regarding how to use combustion analyzers. Don't miss to utilize a combustion analyzer.