Version: 3 Sep 2020
Table of Content
No. Product Name
1.
Rimula R2 Extra 15W-40
2.
Rimula R2 Extra 20W-50
3.
Rimula R3 10W
4.
Rimula R3+ 30
5.
Rimula R3+ 40
6.
Rimula R4X 15W-40
7.
Rimula R4X 20W-50
8.
Rimula R5 LE 10W-40
9.
Rimula R6LM 10W-40
10.
Rimula R6MS 10W-40
11.
Rimula LD4
12.
Rimula LD5
Technical Data Sheet
Shell Rimula R2 Extra 15W-40
• Turbo-charger Performance
Heavy Duty Diesel Engine Oil
Shell Rimula R2 Extra oils keep the engine clean. Additives ensure protection against deposits, wear and resist
thickening by heat, suitable for most heavy duty applications including turbo-charged engines.
·
Performance, Features & Benefits
·
·
Multigrade benefits
Shell Rimula R2 Extra is the ideal choice for a wide range of
Compared to monograde oils, Shell Rimula R2 Extra can
turbo-charged and non-turbocharged engines under normal
deliver the user a range of benefits associated with the use
operation. It is particularly recommended for use in older
of multigrade oils. These include reduction of oil
trucks and buses as well as for cost effective lubrication in
consumption by up to 30%*, longer oil life and improved
off highway applications such as agricultural tractors.
fuel economy. (* As stated by a leading engine maker).
·
For more severe operations or applications in modern low
emission engines we recommend Shell Rimula R4 X
Protection for turbo-charged engines
multigrade engine oils.
Shell Rimula R2 Extra can be used in many turbocharged
·
Automotive diesel engines
engines to provide protection and long engine life.
Specifications, Approvals & Recommendations
Major engine manufacturer acceptance
Shell Rimula R2 Extra meets the recommendation of many
major automotive engine builders providing flexibility to
vehicle and equipment owners.
·
·
API CF-4
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Help Desk.
Main Applications
Typical Physical Characteristics
Properties
Method
cSt
ASTM D445
Shell Rimula R2 Extra 15W40
104
cSt
ASTM D445
14.3
ASTM D2270
141
mPa s
ASTM D5293
6600
kg/l
ASTM D4052
0.890
Flash Point (COC)
0
ASTM D92
226
Pour Point
0
ASTM D97
-33
@400C
Kinematic Viscosity
0
Kinematic Viscosity
@100 C
Viscosity Index
0
Dynamic Viscosity
@-20 C
0
Density
@15 C
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Page 1 of 2
Rimula R2 Extra 15W-40 (CF-4), v 1.1
10.02.2016.17.45
Health, Safety & Environment
·
Health and Safety
Shell Rimula R2 Extra 15W-40 is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Rimula R2 Extra 15W-40 (CF-4), v 1.1
10.02.2016.17.45
Technical Data Sheet
Shell Rimula R2 Extra 20W-50
• Turbo-charger Performance
Heavy Duty Diesel Engine Oil
Shell Rimula R2 Extra oils keep the engine clean. Additives ensure protection against deposits, wear and resist
thickening by heat, suitable for most heavy duty applications including turbo-charged engines.
·
Performance, Features & Benefits
·
·
Multigrade benefits
Shell Rimula R2 Extra is the ideal choice for a wide range of
Compared to monograde oils, Shell Rimula R2 Extra can
turbo-charged and non-turbocharged engines under normal
deliver the user a range of benefits associated with the use
operation. It is particularly recommended for use in older
of multigrade oils. These include reduction of oil
trucks and buses as well as for cost effective lubrication in
consumption by up to 30%*, longer oil life and improved
off highway applications such as agricultural tractors.
fuel economy. (* As stated by a leading engine maker).
·
For more severe operations or applications in modern low
emission engines we recommend Shell Rimula R4 X
Protection for turbo-charged engines
multigrade engine oils.
Shell Rimula R2 Extra can be used in many turbocharged
·
Automotive diesel engines
engines to provide protection and long engine life.
Specifications, Approvals & Recommendations
Major engine manufacturer acceptance
Shell Rimula R2 Extra meets the recommendation of many
major automotive engine builders providing flexibility to
vehicle and equipment owners.
·
·
API CF-4
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Help Desk.
Main Applications
Typical Physical Characteristics
Properties
Method
cSt
ASTM D445
Shell Rimula R2 Extra 20W50
162
cSt
ASTM D445
18.9
ASTM D2270
134
mPa s
ASTM D5293
8400
kg/l
ASTM D4052
0.893
Flash Point (COC)
0
ASTM D92
246
Pour Point
0
ASTM D97
-27
@400C
Kinematic Viscosity
0
Kinematic Viscosity
@100 C
Viscosity Index
0
Dynamic Viscosity
@-15 C
0
Density
@15 C
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Page 1 of 2
Rimula R2 Extra 20W-50 (CF-4), v 1.1
10.02.2016.17.47
Health, Safety & Environment
·
Health and Safety
Shell Rimula R2 Extra 20W-50 is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Rimula R2 Extra 20W-50 (CF-4), v 1.1
10.02.2016.17.47
Technical Data Sheet
Shell Rimula R3 10W
• Extra Performance
Heavy Duty Diesel Engine Oil
Shell Rimula R3 oil adapts to driving needs to provide extra protection. Its active-detergent system keeps pistons
and other engine parts clean, provides protection against wear for long engine life and against deposits for
efficient performance.
·
Performance, Features & Benefits
·
·
Equipment manufacturer acceptance
Engine oil technology is sometimes specified for use in
Shell Rimula R3 monogrades are approved for use in a
transmission and hydraulic applications. Shell Rimula R3
variety of engine application by leading OEMs.
monogrades offer premium performance and protection for
High standard of piston cleanliness
·
The high thermal stability and oil oxidation resistance
·
Construction industry application
these applications.
Stationary equipment
Shell Rimula R3 monogrades are suitable for certain
provide a high standard of piston cleanliness.
stationary equipment, such as pumps, that run continuously
Low engine wear and long component life
under steady state conditions.
Overall engine cleanliness contributes to low engine wear,
long component life, maintenance of power output, more
Specifications, Approvals & Recommendations
·
operational stability and lower servicing costs.
Main Applications
API CF
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Helpdesk.
·
Compatibility & Miscibility
·
Dedicated diesel engine oil performance
Shell Rimula R3 monogrades have been formulated to
Shell Rimula R3 oils should not be used in Detroit Diesel
two-stroke engines. An SAE 40 oil meeting the API CF-II
provide robust engine performance in a variety of off-
Specification and having a sulphated ash content of less
highway applications or older on-highway diesel vehicles.
than 1% should be used.
Typical Physical Characteristics
Properties
Kinematic Viscosity
0
@40 C
mm /s
Method
ASTM D445
Shell Rimula R3 10W
43
2
Kinematic Viscosity
@100 C
mm2/s
ASTM D445
7
Dynamic Viscosity
@-250C
mPa s
ASTM D5293
6240
ASTM D2270
122
kg/l
ASTM D4052
0.885
Flash Point (COC)
0
ASTM D92
219
Pour Point
0
ASTM D97
-33
0
Viscosity Index
Density
@150C
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Page 1 of 2
Rimula R3 10W (CF), v 2.2
11.03.2019.08.17
Health, Safety & Environment
·
Health and Safety
Shell Rimula R3 Oil is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Rimula R3 10W (CF), v 2.2
11.03.2019.08.17
Technical Data Sheet
Shell Rimula R3+ 30
• Extra Performance
Heavy Duty Diesel Engine Oil
Shell Rimula R3 oils adapts to your driving needs to provide extra protection and keep pistons and other engine
parts clean. It provides protection against wear for long engine life and protection against deposits for efficient
engine performance.
·
Performance, Features & Benefits
·
·
Equipment manufacturer acceptance
Engine oil technology is sometimes specified for use in the
Shell Rimula R3 monogrades are approved for use in a
transmission and hydraulic applications. Shell Rimula R3
variety of engine applications by leading OEMs.
monogrades offer premium performance and protection for
High standard of piston cleanliness
The high thermal stability and oil oxidation resistance
·
·
these applications.
Stationary equipment
Shell Rimula R3 monogrades are suitable for certain
provide a high standard of piston cleanliness.
stationary equipment, such as pumps, that run continuously
Low engine wear and long component life
under steady state conditions.
Overall engine cleanliness contributes to low engine wear,
long component life, maintenance of power output, more
Specifications, Approvals & Recommendations
·
·
·
·
operational stability and lower servicing costs.
Main Applications
·
Construction industry application
MAN 270
MB-Approval 228.0
MTU Category 1
API CF
For a full listing of equipment approvals and
Dedicated diesel engine oil performance
recommendations, please consult your local Shell Technical
Shell Rimula R3 monogrades have been formulated to
Helpdesk.
provide robust engine performance in a variety of offhighway applications or older on-highway diesel vehicles.
Compatibility & Miscibility
·
Shell Rimula R3 oils should not be used in Detroit Diesel
two-stroke engines. An SAE 40 oil meeting the API CF-II
Specification and having a sulphated ash content of less
than 1% should be used.
Typical Physical Characteristics
Properties
Kinematic Viscosity
0
@40 C
mm /s
Method
ASTM D445
Shell Rimula R3+ 30
93
2
Kinematic Viscosity
@100 C
mm2/s
ASTM D445
11
Dynamic Viscosity
@-250C
mPa s
ASTM D5293
-
ASTM D2270
103
kg/l
ASTM D4052
0.89
Flash Point (COC)
0
ASTM D92
242
Pour Point
0
ASTM D97
-18
0
Viscosity Index
Density
Page 1 of 2
@150C
C
C
Rimula R3+ 30 (CF/228.0), v 1.3
29.02.2016.14.04
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Rimula R3+ is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Rimula R3+ 30 (CF/228.0), v 1.3
29.02.2016.14.04
Technical Data Sheet
Shell Rimula R3+ 40
• Extra Performance
Heavy Duty Diesel Engine Oil
Shell Rimula R3 oils adapts to your driving needs to provide extra protection and keep pistons and other engine
parts clean. It provides protection against wear for long engine life and protection against deposits for efficient
engine performance.
·
Performance, Features & Benefits
·
·
Equipment manufacturer acceptance
Shell Rimula R3 monogrades are suitable for certain
Shell Rimula R3 monogrades are approved for use in a
stationary equipment, such as pumps, that run continuously
variety of engine applications by leading OEMs.
under steady state conditions.
High standard of piston cleanliness
Compatibility & Miscibility
The high thermal stability and oil oxidation resistance
·
Stationary equipment
provide a high standard of piston cleanliness.
·
Shell Rimula R3 oils should not be used in Detroit Diesel
two-stroke engines. An SAE 40 oil meeting the API CF-II
Low engine wear and long component life
Specification and having a sulphated ash content of less
Overall engine cleanliness contributes to low engine wear,
than 1% should be used.
long component life, maintenance of power output, more
Specifications, Approvals & Recommendations
operational stability and lower servicing costs.
·
·
·
·
·
Main Applications
·
·
Dedicated diesel engine oil performance
MAN 270
MB-Approval 228.0
MTU Category 1
API CF
ACEA E2
Shell Rimula R3 monogrades have been formulated to
For a full listing of equipment approvals and
provide robust engine performance in a variety of off-
recommendations, please consult your local Shell Technical
highway applications or older on-highway diesel vehicles.
Helpdesk.
Construction industry application
Engine oil technology is sometimes specified for use in the
transmission and hydraulic applications. Shell Rimula R3
monogrades offer premium performance and protection for
these applications.
Typical Physical Characteristics
Properties
Kinematic Viscosity
0
@40 C
mm /s
Method
ASTM D445
Shell Rimula R3+ 40
126
2
Kinematic Viscosity
@100 C
mm2/s
ASTM D445
13.5
Dynamic Viscosity
@-250C
mPa s
ASTM D5293
-
ASTM D2270
102
kg/l
ASTM D4052
0.895
0
ASTM D92
0
Viscosity Index
Density
Flash Point (COC)
Page 1 of 2
@150C
C
Rimula R3+ 40 (CF/228.0), v 1.4
250
29.02.2016.13.59
Properties
0
Pour Point
C
Method
ASTM D97
Shell Rimula R3+ 40
-15
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Rimula R3+ Oil is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Rimula R3+ 40 (CF/228.0), v 1.4
29.02.2016.13.59
Technical Data Sheet
Shell Rimula R4 X 15W-40
• Triple Protection
Heavy Duty Diesel Engine Oil
Shell Rimula R4 X is designed to provide Triple Protection to improve engine and oil durability. It helps to lower
maintenance and increase reliability of vehicles. It’s suitable for most heavy-duty diesel engines for on and off
highway applications.
·
Performance, Features & Benefits
·
Acid and Corrosion Control
Shell Rimula R4 X is suitable for most modern low emission
Shell Rimula R4 X shows excellent control of acids by
engines meeting Euro 5, 4, 3, 2, and US 2002 emission
reducing the accumulation of acids and chemical corrosion
requirements.
of engine bearings. Harmful acids from fuel combustion are
controlled by using selected detergent additives to
neutralise them and help to prevent corrosion of metal
·
High Technology Low Emission Engines
surfaces.
·
·
Shell Rimula R4 X is suitable for use with biodiesel per the
OEM recommended oil drain intervals.
For the latest low emissions engines especially those fitted
with exhaust diesel particulate filters (DPF), we recommend
Reduced Engine Wear
the use of our low-emissions products, Shell Rimula R4 L or
Shell Rimula R4 X offers high levels of engine wear
Shell Rimula R5 LE.
protection in the critical areas of the valve train, piston ring
and cylinder liners. This wear control is achieved through
the addition of anti-wear additives that are designed to form
protective films in metal-to-metal contacts when needed
under different engine operating conditions, and by the use
of soot dispersant additives to keep soot particles finely
·
dispersed to help prevent wear.
Deposit Control
Shell Rimula R4 X helps to prevent oil thickening and the
formation of harmful deposits in all areas of the engine,
including sludge and piston deposits. The optimised
detergent and dispersant additive system for Shell Rimula
R4 X keeps engines cleaner than previous-generation Shell
Rimula R3 products.
Main Applications
·
Severe duty heavy duty diesel engines
Shell Rimula R4 X provides demonstrated protection and
performance in the latest high power heavy-duty diesel
engines from European, US and Japanese manufacturers
in both on-highway and off-highway applications.
Page 1 of 2
Specifications, Approvals & Recommendations
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
API CI-4, CH-4, SL
ACEA E7, E5, E3
Global DHD-1
Caterpillar ECF-2, ECF-1A
Cummins CES 20078, 77, 76, 75, 72, 71
Detroit Fluids Specification 93K215
Deutz DQC III-10
Iveco T1 - Meets the requirements
JASO DH-1
Mack EO-N, EO-M Plus, EO-M
MAN M 3275-1
MB-Approval 228.3
MTU Category 2
Renault Trucks RLD-2
Volvo VDS-3
Case New Holland MAT 3520 (meets specification)
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Helpdesk.
Rimula R4 X 15W-40 (CI-4/E7/DH-1), v 5.0
13.12.2018.09.56
Typical Physical Characteristics
Properties
Kinematic Viscosity
0
@40 C
mm /s
Method
ASTM D445
Shell Rimula R4 X 15W-40
109
2
Kinematic Viscosity
@100 C
mm2/s
ASTM D445
14.7
Dynamic Viscosity
@-200C
mPa s
ASTM D5293
6700
ASTM D2270
139
0
Viscosity Index
Total Base Number
mgKOH/g
ASTM D2896
10.5
Sulphated Ash
%
ASTM D874
1.45
kg/l
ASTM D4052
0.881
Flash Point (COC)
0
ASTM D92
230
Pour Point
0
ASTM D97
-36
Density
@150C
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Rimula R4 X is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Rimula R4 X 15W-40 (CI-4/E7/DH-1), v 5.0
13.12.2018.09.56
Technical Data Sheet
Shell Rimula R5 LE 10W-40
• Low Emissions
• Energy Saving
Synthetic Technology Heavy Duty Diesel Engine Oil
Shell Rimula R5 LE oils feature "Low-SAPS" additive technology while delivering energy savings. Protective
power is enhanced through the use of synthetic base oil technology to deliver fuel economy performance with no
compromise in durability.
·
Performance, Features & Benefits
·
OEM recommended oil drain intervals.
Emissions system capability
Advanced low-ash formulation helps control the blocking or
poisoning of exhaust after-treatment devices, helping
maintain vehicle emission compliance and engine fuel
·
efficiency.
Fuel economy capability
The use of synthetic base oil components provides Shell
Rimula R5 LE with the capability to improve cold starting
and reduce fuel consumption and save money, without
·
compromising engine protection or durability.
Improved engine cleanliness
The advanced formulation delivers good engine cleanliness
and protection against piston deposits allowing Shell
Rimula R5 LE to ensure engine and component reliability at
extended oil drain intervals.
Main Applications
·
Shell Rimula R5 LE is suitable for use with biodiesel per the
Specifications, Approvals & Recommendations
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
API CK-4, CJ-4, CI-4 Plus, CI-4, CH-4, SN
ACEA E9, E7
JASO DH-2
Caterpillar ECF-3, ECF-2
Cummins CES 20086, 20081
Deutz DQC III-10 LA
Detroit Fluids Specification 93K222, 93K218
MAN M 3575
MB-Approval 228.31
MTU Category 2.1
Mack EO-S 4.5, EO-O Premium Plus
Renault VI RLD-4, VI RLD-3
Volvo VDS-4.5, VDS-4
Iveco TLS E9 - Meets the requirements
CNH MAT 3521 (Meets specification)
European heavy duty engines
For a full listing of equipment approvals and
Shell Rimula R5 LE provides protection and performance in
recommendations, please consult your local Shell Technical
modern high power heavy-duty diesel engines from leading
Helpdesk.
European engine makers such as Mercedes-Benz and
·
MAN and where oils meeting ACEA E9 are called for.
Low emission engine use
Shell Rimula R5 LE meets the requirements of the major
European and North American engine manufacturers for
low emission applications.
Page 1 of 2
Rimula R5 LE 10W-40 (CK-4), v 1.5
11.03.2019.04.04
Typical Physical Characteristics
Properties
Kinematic Viscosity
0
@40 C
mm /s
Method
ASTM D445
Shell Rimula R5 LE 10W-40
102
2
Kinematic Viscosity
@100 C
mm2/s
ASTM D445
14.8
Dynamic Viscosity
@-250C
mPa s
ASTM D5293
6 500
ASTM D2270
152
0
Viscosity Index
Total Base Number
mg KOH/g
ASTM D2896
10
Sulphated Ash
%
ASTM D874
1
kg/l
ASTM D4052
0.862
Flash Point (COC)
0
ASTM D92
237
Pour Point
0
ASTM D97
-42
Density
@150C
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Rimula R5 LE 10W-40 is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Rimula R5 LE 10W-40 (CK-4), v 1.5
11.03.2019.04.04
Technical Data Sheet
Shell Rimula R6 LM 10W-40
• Low Emissions
• Maintenance Saving
Fully Synthetic Heavy Duty Diesel Engine Oil
Fully synthetic oil featuring "Low-SAPS" additive technology to provide protective power and deliver Maintenance
Savings.
·
Performance, Features & Benefits
·
·
Maintenance saving
Shell Rimula R6 LM meets the latest requirements of most
Shell Rimula R6 LM meets the long oil drain requirements
OEMs for Euro 4, 5, 6 engines and exceeds the performance
of Mercedes-Benz, MAN and others, from the latest Euro 6
requirements of industry specifications such as ACEA E9
to older generation engines, to allow operators to optimize
and API CK-4.
maintenance schedules and control maintenance costs.
Advanced low-ash formulation helps control blocking of or
fitted with engines designed to run on 100% CNG such as
poisoning of exhaust after-treatment devices, helping
those from Mercedes-Benz and MAN.
·
efficiency.
Low wear, low deposits
Specifications, Approvals & Recommendations
protection.
Fuel economy
Shell Rimula R6 LM can save money in fuel consumption
compared to high viscosity grades.
Main Applications
On-highway heavy duty applications
Particularly suited for a wide range of trucking and
transportation applications in modern low-emission vehicles
from Mercedes-Benz, MAN, Volvo and others. Especially
suitable for fleets with mixed Euro 2,3,4, 5 and 6 engine
types.
Shell Rimula R6 LM is suitable for use with biodiesel per the
OEM recommended oil drain intervals.
cleanliness essential for long engine life and wear
·
CNG engine oil performance
Shell Rimula R6 LM is approved for use in buses and trucks
Unique additive technology delivers high levels of piston
·
·
Emissions system compatibility
maintain vehicle emission compliance and engine fuel
·
Low emission engine use
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
ACEA E6, E9, E7
API CK-4, CJ-4
Caterpillar ECF-3, ECF-2
Cummins CES 20086, 20081
DAF Meets ACEA E6
Deutz DQC IV-10 LA
Detroit Fluids Specification 93K222, 93K218
JASO DH-2
Mack EO-S 4.5, EO-O Premium Plus
MAN M 3477, M 3271-1
MB-Approval 228.51
MTU Category 3.1
Renault Trucks RLD-4, RLD-3
Volvo VDS-4.5, VDS-4
Iveco NG2 - Meets the requirements
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Helpdesk.
Page 1 of 2
Rimula R6 LM 10W-40 (CK-4), v 1.3
23.01.2019.13.45
Typical Physical Characteristics
Properties
Kinematic Viscosity
0
@40 C
mm /s
Method
ASTM D445
Shell Rimula R6 LM 10W-40
96.8
2
Kinematic Viscosity
@100 C
mm2/s
ASTM D445
14.5
Dynamic Viscosity
@-250C
mPa s
ASTM D5293
6 080
%
ASTM D874
0.95
kg/m3
ASTM D4052
849
Flash Point (COC)
0
ASTM D92
250
Pour Point
0
C
ASTM D97
-36
Total base number (TBN)
mg KOH/g
ASTM D2896
12.9
0
Sulphated Ash
Density
@150C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Rimula R6 LM oils are unlikely to present any significant health or safety hazard when properly used in the
recommended application, and good standards of industrial and personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorized collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell Representative.
Page 2 of 2
Rimula R6 LM 10W-40 (CK-4), v 1.3
23.01.2019.13.45
Technical Data Sheet
Shell Rimula R6 MS 10W-40
• Maintenance Saving
Fully Synthetic Heavy Duty Diesel Engine Oil
Shell Rimula R6 MS fully synthetic oils deliver highly responsive protection, maintenance saving long drain
performance, protection against soot, wear, deposits and fuel economy. Suitable for most Euro 4, 5 engines and
Euro 6 Scania engines.
Performance, Features & Benefits
·
Also meets or exceeds the performance requirements of
Maintenance Saving
other European makers such as Volvo, Renault, DAF,
Shell Rimula R6 MS meets the long oil drain requirements
Scania, Deutz and Iveco as well as Cummins, Mack and
of leading engine makers such as Mercedes-Benz, MAN,
many Japanese engine types Not recommended for
DAF, Volvo and others to allow operators to optimize
Caterpillar engines.
maintenance scheduling and maximize equipment
·
·
Shell Rimula R6 MS meets the requirements of most
Exceptional Piston Cleanliness
European manufacturers for Euro 2,3 engines and most
Shell Rimula R6 MS use advanced additive technology that
Euro IV and Euro V engines without Diesel Particle Filter as
builds on the reputation and performance of Shell Rimula
well as Euro VI engines of Scania.
engine oils for high levels of piston cleanliness essential for
For enhanced performance and protection of the latest low
long engine life.
emission engines, we recommend the use of our advanced
Low Wear -Long Engine Life
low-emissions products, Shell Rimula R6 LM/LME.
of many European, American and Japanese engines,
controlling bore polish and valve train wear thus maximising
engine life.
Fuel Economy
Shell Rimula R6 MS can save money in fuel consumption
compared to high viscosity grades.
Main Applications
·
Low Emission Engine Use
availability without compromising durability.
Shell Rimula R6 MS meets the demanding wear protection
·
·
On-highway Heavy Duty Applications
Specifications, Approvals & Recommendations
·
·
·
·
·
·
·
·
·
ACEA E7, E4
Deutz DQC IV-10
IVECO T3 E4 (Meets Iveco Specification)
MAN M3277
MB-Approval 228.5
MTU Category 3
Renault trucks RXD
Scania LDF-2 / LDF-3
Volvo VDS-3
For a full listing of equipment approvals and
Particularly suited for a wide range of trucking and
recommendations, please consult your local Shell Technical
transportation applications in vehicle using modern low-
Help Desk.
emission engines from Mercedes-Benz and MAN.
Typical Physical Characteristics
Properties
Kinematic Viscosity
@400C
mm2/s
Method
ASTM D445
Shell Rimula R6 MS 10W-40
90.0
Kinematic Viscosity
@1000C
mm2/s
ASTM D445
13.6
Page 1 of 2
Rimula R6 MS 10W-40 (E7/LDF-3) , v 2.2
03.03.2016.13.57
Properties
0
Dyn. Viscosity
@ -25 C
mPa s
Viscosity Index
Method
ASTM D5293
Shell Rimula R6 MS 10W-40
6600
ASTM D2270
153
Total Base Number
mgKOH/g
ASTM D2896
15.9
Sulphated Ash
%
ASTM D874
1.9
kg/l
ASTM D4052
0.867
Flash Point (COC)
0
ASTM D92
240
Pour Point
0
ASTM D97
-42
@150C
Density
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Rimula R6 MS 10W-40 is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Rimula R6 MS 10W-40 (E7/LDF-3) , v 2.2
03.03.2016.13.57
Table of Content
No. Product Name
1.
Hydraulic S1 M 68
2.
Tellus S2 MX 32
3.
Tellus S2 MX 46
4.
Tellus S2 MX 68
5.
Tellus S2 MX 100
6.
Tellus S2 VX 15
7.
Tellus S2 VX 32
8.
Tellus S2 VX 46
9.
Tellus S2 VX 68
10.
Tellus S2 VX 100
11.
Tellus S3 M 46
12.
Tellus S3 M 68
Technical Data Sheet
Previous Name: Shell Hydrau HM
• Reliable Protection
• Industrial Applications
Shell Hydraulic S1 M 68
Industrial Hydraulic Fluid
Shell Hydraulic S1 M 32/46/68 is a quality anti-wear hydraulic fluid which provides cost effective and reliable
protection and performance in most industrial and mobile applications.
·
Performance, Features & Benefits
·
Tellus range of fluids provide superior performance for
Oxidation resistant
systems where the stress on the fluid is high and ultra-fine
Resists oxidation in presence of air, water and copper
filtration and sophisticated control valves are employed.
therefore offering good oil life and deposit control in
·
hydraulic systems.
Specifications, Approvals & Recommendations
Good anti-wear performance
Formulated with proven anti-wear technology to be
effective throughout the range of operating conditions,
·
·
DIN 51524 Part 2 HLP type
recommendations, please consult your local Shell Technical
protect components like pumps etc.
Helpdesk.
Good air release and anti-foam properties
Good surface properties to ensure quick air release while
·
ISO 11158 (HM fluids)
For a full listing of equipment approvals and
including low and severe duty high load conditions to
·
For more demanding and specialized applications, the Shell
ensuring foam control in the system.
Compatibility & Miscibility
·
Compatibility
Shell Hydraulic S1 M fluids are suitable for use with most
Good water separation
hydraulic pumps. However, please consult your Shell
Good demulsibility to resist formation of water-in-oil
representative before using in pumps containing silver plated
emulsions and prevent consequent damage to pump and
·
hydraulic system cleanliness: Meets cleanliness
requirement of ISO 4406 class 21/19/16.
components.
Fluid Compatibility
Shell Hydraulic S1 M fluids are compatible with most other
Main Applications
mineral oil based hydraulic fluids. However, mineral oil
hydraulic fluids should not be mixed with other fluid types
·
·
·
(e.g. environmentally acceptable or fire resistant fluids).
Seal & Paint Compatibility
Industrial hydraulic systems
Shell Hydraulic S1 M fluids are compatible with seal
Suitable for a wide range of hydraulic power applications
materials and paints normally specified for use with mineral
found in industrial environments.
oils.
Mobile hydraulic fluid power transmission systems
Shell Hydraulic S1 M fluids can be used in mobile hydraulic
power applications such as excavators and cranes.
Operating under moderate duty cycles, except where
significant ambient temperature variations are encountered.
Page 1 of 3
Hydraulic S1 M 68, v 3.5
12.11.2015.16.02
Typical Physical Characteristics
Properties
Method
ISO 3448
ISO Viscosity Grade
Hydraulic S1 M 68
68
HM
ISO Fluid Type
Kinematic Viscosity
@400C
cSt
ASTM D445
68
Kinematic Viscosity
@1000C
cSt
ASTM D445
8.6
ISO 2909
97
kg/l
ISO 12185
0.875
Flash Point (COC)
0
ISO 2592
240
Pour Point
0
ISO 3016
-12
Viscosity Index
Density
@150C
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
·
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Hydraulic S1 M 68, v 3.5
12.11.2015.16.02
Page 3 of 3
Hydraulic S1 M 68, v 3.5
12.11.2015.16.02
Technical Data Sheet
•
•
•
•
Shell Tellus S2 MX 32
Long Oil Life
Extra Protection
Maintain System Efficiency
Industrial Applications
High Performance Hydraulic Fluid, Group II Base Oil Technology, Industrial Applications
Shell Tellus S2 MX fluids are high performance hydraulic fluids based on Group II base oils that provide
outstanding protection and performance in most manufacturing and many mobile equipment operations. They
resist breakdown under heat or mechanical stress and help prevent damaging deposit formation that can
decrease the efficiency of your hydraulic power system.
Performance, Features & Benefits
·
Shell Tellus S2 MX fluids are formulated for exceptional
foam control and excellent air release to facilitate efficient
Long fluid life – maintenance saving
hydraulic power transfer and minimise fluid and equipment
Shell Tellus S2 MX fluids help extend equipment
impacts of cavitation induced oxidation that can shorten fluid
maintenance intervals by resisting thermal and chemical
life.
breakdown. This minimizes any harmful sludge formation
and provides better reliability and system cleanliness.
Main Applications
Shell Tellus S2 MX fluids also have good stability in the
presence of moisture, which ensures long fluid life and
reduces the risk of corrosion and rusting, particularly in
·
moist or humid environments.
Industrial hydraulic systems
Outstanding wear protection
Shell Tellus S2 MX fluids are suitable for a wide range of
Tellus S2 MX is designed to meet the demands of hydraulic
hydraulic power applications found in manufacturing and
systems well in to the future, including new specifications
industrial environments.
such as Bosch Rexroth Fluid Rating RDE 90245 and
·
·
·
Mobile hydraulic fluid power transmission systems
enhanced extreme pressure performance in the FZG test
Shell Tellus S2 MX fluids can be used effectively in mobile
(FLS 11 at ISO VG 32). It also demonstrates excellent
hydraulic power applications such as excavators and cranes,
performance in the tough Denison T6H20C (dry and wet
except where significant ambient temperature variations are
versions) and the demanding Eaton Vickers 35VQ25. Shell
encountered. For these applications we recommend Shell
Tellus S2 MX fluids can help system components last
Tellus S2 VX.
longer.
Maintaining system efficiency
·
Marine hydraulic systems
Suitable for marine applications where ISO HM category
Excellent filterability and high performance water
hydraulic fluids are recommended.
separation, air release and antifoam characteristics all help
contribute to maintaining or enhancing the efficiency of
hydraulic systems. Optimization of friction characteristics
also helps reduce harmful stick-slip effects.
An oil cleanliness particle count of ISO 4406 20/18/15 or
better (measured at the point of filling) helps reduce the
impact of contaminants on filter blocking, allowing both
extended filter life and enhancing equipment protection.
Page 1 of 3
Tellus S2 MX 32 (2016), v 4.1
05.07.2016.09.57
Specifications, Approvals & Recommendations
Product is designed to meet :
·
·
·
·
·
·
·
·
Compatibility & Miscibility
·
Compatibility
Bosch Rexroth Fluid Rating RDE 90245
Shell Tellus S2 MX fluids are suitable for use with most
Parker Denison (HF-0, HF-1, HF-2)
hydraulic pumps.
·
Eaton E-FDGN-TB002-E
Fluid Compatibility
Shell Tellus S2 MX fluids are compatible with most other
Fives (Cincinnati Machine) P-68
mineral oil based hydraulic fluids. However, mineral oil
ISO 11158 (HM fluids)
hydraulic fluids should not be mixed with other fluid types
DIN 51524 Part 2 HLP type
·
ASTM D6158-05 (HM fluids)
Swedish Standard SS 15 54 34 AM
(e.g. environmentally acceptable or fire resistant fluids).
Seal & Paint Compatibility
Shell Tellus S2 MX fluids are compatible with seal materials
and paints normally specified for use with mineral oils.
For a full listing of equipment approvals and
recommendations, please consult your local Shell
Technical Helpdesk.
Typical Physical Characteristics
Properties
Method
ISO Fluid Type
Shell Tellus S2 MX 32
HM
Kinematic Viscosity
@00C
cSt
ASTM D445
340
Kinematic Viscosity
@400C
cSt
ASTM D445
32
Kinematic Viscosity
@1000C
cSt
ASTM D445
5.4
ISO 2909
105
kg/l
ISO 12185
0.854
Flash Point (COC)
0
ISO 2592
220
Pour Point
0
ISO 3016
-30
ASTM D1500
L0.5
Viscosity Index
Density
@150C
C
C
Colour
Water Separation
minutes
ASTM D1401
20
TOST life
hours minimum
ASTM D943
5000
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Tellus S2 MX hydraulic fluid is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Tellus S2 MX 32 (2016), v 4.1
05.07.2016.09.57
Technical Data Sheet
•
•
•
•
Shell Tellus S2 MX 46
Long Oil Life
Extra Protection
Maintain System Efficiency
Industrial Applications
Industrial Hydraulic Fluid, Group II Base Oil Technology, Industrial Applications
Shell Tellus S2 MX fluids are high performance hydraulic fluids based on Group II base oils that provide
outstanding protection and performance in most manufacturing and many mobile equipment operations. They
resist breakdown under heat or mechanical stress and help prevent damaging deposit formation that can
decrease the efficiency of your hydraulic power system.
Performance, Features & Benefits
·
Shell Tellus S2 MX fluids are formulated for exceptional
foam control and excellent air release to facilitate efficient
Long fluid life – maintenance saving
hydraulic power transfer and minimise fluid and equipment
Shell Tellus S2 MX fluids help extend equipment
impacts of cavitation induced oxidation that can shorten fluid
maintenance intervals by resisting thermal and chemical
life.
breakdown. This minimizes any harmful sludge formation
and provides better reliability and system cleanliness.
Main Applications
Shell Tellus S2 MX fluids also have good stability in the
presence of moisture, which ensures long fluid life and
reduces the risk of corrosion and rusting, particularly in
·
moist or humid environments.
Industrial hydraulic systems
Outstanding wear protection
Shell Tellus S2 MX fluids are suitable for a wide range of
Tellus S2 MX is designed to meet the demands of hydraulic
hydraulic power applications found in manufacturing and
systems well in to the future, including new specifications
industrial environments.
such as Bosch Rexroth Fluid Rating RDE 90245 and
·
·
·
Mobile hydraulic fluid power transmission systems
enhanced extreme pressure performance in the FZG test
Shell Tellus S2 MX fluids can be used effectively in mobile
(FLS 11 at ISO VG 32). It also demonstrates excellent
hydraulic power applications such as excavators and cranes,
performance in the tough Denison T6H20C (dry and wet
except where significant ambient temperature variations are
versions) and the demanding Eaton Vickers 35VQ25. Shell
encountered. For these applications we recommend Shell
Tellus S2 MX fluids can help system components last
Tellus S2 VX.
longer.
Maintaining system efficiency
·
Marine hydraulic systems
Suitable for marine applications where ISO HM category
Excellent filterability and high performance water
hydraulic fluids are recommended.
separation, air release and antifoam characteristics all help
contribute to maintaining or enhancing the efficiency of
hydraulic systems. Optimization of friction characteristics
also helps reduce harmful stick-slip effects.
An oil cleanliness particle count of ISO 4406 20/18/15 or
better (measured at the point of filling) helps reduce the
impact of contaminants on filter blocking, allowing both
extended filter life and enhancing equipment protection.
Page 1 of 3
Tellus S2 MX 46 (2016), v 4.1
05.07.2016.12.04
Specifications, Approvals & Recommendations
Product is designed to meet :
·
·
·
·
·
·
·
·
Compatibility & Miscibility
·
Compatibility
Bosch Rexroth Fluid Rating RDE 90245
Shell Tellus S2 MX fluids are suitable for use with most
Parker Denison (HF-0, HF-1, HF-2)
hydraulic pumps.
·
Eaton E-FDGN-TB002-E
Fluid Compatibility
Shell Tellus S2 MX fluids are compatible with most other
Fives (Cincinnati Machine) P-70
mineral oil based hydraulic fluids. However, mineral oil
ISO 11158 (HM fluids)
hydraulic fluids should not be mixed with other fluid types
DIN 51524 Part 2 HLP type
·
ASTM D6158-05 (HM fluids)
Swedish Standard SS 15 54 34 AM
(e.g. environmentally acceptable or fire resistant fluids).
Seal & Paint Compatibility
Shell Tellus S2 MX fluids are compatible with seal materials
and paints normally specified for use with mineral oils.
For a full listing of equipment approvals and
recommendations, please consult your local Shell
Technical Helpdesk.
Typical Physical Characteristics
Properties
Method
ISO Fluid Type
Shell Tellus S2 MX 46
HM
Kinematic Viscosity
@00C
cSt
ASTM D445
580
Kinematic Viscosity
@400C
cSt
ASTM D445
46
Kinematic Viscosity
@1000C
cSt
ASTM D445
6.9
ISO 2909
105
kg/l
ISO 12185
0.856
Flash Point (COC)
0
ISO 2592
230
Pour Point
0
ISO 3016
-30
ASTM D1500
L0.5
Viscosity Index
Density
@150C
C
C
Colour
Water Separation
minutes
ASTM D1401
20
TOST life
hours minimum
ASTM D943
5000
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Tellus S2 MX hydraulic fluid is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Tellus S2 MX 46 (2016), v 4.1
05.07.2016.12.04
Technical Data Sheet
•
•
•
•
Shell Tellus S2 MX 68
Long Oil Life
Extra Protection
Maintain System Efficiency
Industrial Applications
High Performance Hydraulic Fluid, Group II Base Oil Technology, Industrial Applications
Shell Tellus S2 MX fluids are high performance hydraulic fluids based on Group II base oils that provide
outstanding protection and performance in most manufacturing and many mobile equipment operations. They
resist breakdown under heat or mechanical stress and help prevent damaging deposit formation that can
decrease the efficiency of your hydraulic power system.
Performance, Features & Benefits
·
Shell Tellus S2 MX fluids are formulated for exceptional
foam control and excellent air release to facilitate efficient
Long fluid life – maintenance saving
hydraulic power transfer and minimise fluid and equipment
Shell Tellus S2 MX fluids help extend equipment
impacts of cavitation induced oxidation that can shorten fluid
maintenance intervals by resisting thermal and chemical
life.
breakdown. This minimizes any harmful sludge formation
and provides better reliability and system cleanliness.
Main Applications
Shell Tellus S2 MX fluids also have good stability in the
presence of moisture, which ensures long fluid life and
reduces the risk of corrosion and rusting, particularly in
·
moist or humid environments.
Industrial hydraulic systems
Outstanding wear protection
Shell Tellus S2 MX fluids are suitable for a wide range of
Tellus S2 MX is designed to meet the demands of hydraulic
hydraulic power applications found in manufacturing and
systems well in to the future, including new specifications
industrial environments.
such as Bosch Rexroth Fluid Rating RDE 90245 and
·
·
·
Mobile hydraulic fluid power transmission systems
enhanced extreme pressure performance in the FZG test
Shell Tellus S2 MX fluids can be used effectively in mobile
(FLS 11 at ISO VG 32). It also demonstrates excellent
hydraulic power applications such as excavators and cranes,
performance in the tough Denison T6H20C (dry and wet
except where significant ambient temperature variations are
versions) and the demanding Eaton Vickers 35VQ25. Shell
encountered. For these applications we recommend Shell
Tellus S2 MX fluids can help system components last
Tellus S2 VX.
longer.
Maintaining system efficiency
·
Marine hydraulic systems
Suitable for marine applications where ISO HM category
Excellent filterability and high performance water
hydraulic fluids are recommended.
separation, air release and antifoam characteristics all help
contribute to maintaining or enhancing the efficiency of
hydraulic systems. Optimization of friction characteristics
also helps reduce harmful stick-slip effects.
An oil cleanliness particle count of ISO 4406 20/18/15 or
better (measured at the point of filling) helps reduce the
impact of contaminants on filter blocking, allowing both
extended filter life and enhancing equipment protection.
Page 1 of 3
Tellus S2 MX 68 (2016), v 4.1
05.07.2016.12.54
Specifications, Approvals & Recommendations
Product is designed to meet :
·
·
·
·
·
·
·
·
Compatibility & Miscibility
·
Compatibility
Bosch Rexroth Fluid Rating RDE 90245
Shell Tellus S2 MX fluids are suitable for use with most
Parker Denison (HF-0, HF-1, HF-2)
hydraulic pumps.
·
Eaton E-FDGN-TB002-E
Fluid Compatibility
Shell Tellus S2 MX fluids are compatible with most other
Fives (Cincinnati Machine) P-69
mineral oil based hydraulic fluids. However, mineral oil
ISO 11158 (HM fluids)
hydraulic fluids should not be mixed with other fluid types
DIN 51524 Part 2 HLP type
·
ASTM D6158-05 (HM fluids)
Swedish Standard SS 15 54 34 AM
(e.g. environmentally acceptable or fire resistant fluids).
Seal & Paint Compatibility
Shell Tellus S2 MX fluids are compatible with seal materials
and paints normally specified for use with mineral oils.
For a full listing of equipment approvals and
recommendations, please consult your local Shell
Technical Helpdesk.
Typical Physical Characteristics
Properties
Method
ISO Fluid Type
Shell Tellus S2 MX 68
HM
Kinematic Viscosity
@00C
cSt
ASTM D445
1000
Kinematic Viscosity
@400C
cSt
ASTM D445
68
Kinematic Viscosity
@1000C
cSt
ASTM D445
8.9
ISO 2909
105
kg/l
ISO 12185
0.860
Flash Point (COC)
0
ISO 2592
230
Pour Point
0
ISO 3016
-24
ASTM D1500
L0.5
Viscosity Index
Density
@150C
C
C
Colour
Water Separation
minutes
ASTM D1401
20
TOST life
hours minimum
ASTM D943
5000
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Tellus S2 MX hydraulic fluid is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Tellus S2 MX 68 (2016), v 4.1
05.07.2016.12.54
Technical Data Sheet
•
•
•
•
Shell Tellus S2 MX 100
Long Oil Life
Extra Protection
Maintain System Efficiency
Industrial Applications
High Performance Hydraulic Fluid, Group II Base Oil Technology, Industrial Applications
Shell Tellus S2 MX fluids are high performance hydraulic fluids based on Group II base oils that provide
outstanding protection and performance in most manufacturing and many mobile equipment operations. They
resist breakdown under heat or mechanical stress and help prevent damaging deposit formation that can
decrease the efficiency of your hydraulic power system.
Performance, Features & Benefits
·
Shell Tellus S2 MX fluids are formulated for exceptional
foam control and excellent air release to facilitate efficient
Long fluid life – maintenance saving
hydraulic power transfer and minimise fluid and equipment
Shell Tellus S2 MX fluids help extend equipment
impacts of cavitation induced oxidation that can shorten fluid
maintenance intervals by resisting thermal and chemical
life.
breakdown. This minimizes any harmful sludge formation
and provides better reliability and system cleanliness.
Main Applications
Shell Tellus S2 MX fluids also have good stability in the
presence of moisture, which ensures long fluid life and
reduces the risk of corrosion and rusting, particularly in
·
moist or humid environments.
Industrial hydraulic systems
Outstanding wear protection
Shell Tellus S2 MX fluids are suitable for a wide range of
Tellus S2 MX is designed to meet the demands of hydraulic
hydraulic power applications found in manufacturing and
systems well in to the future, and enhanced extreme
industrial environments.
pressure performance in the FZG test (FLS 11 at ISO VG
·
·
·
Mobile hydraulic fluid power transmission systems
32). It also demonstrates excellent performance in the
Shell Tellus S2 MX fluids can be used effectively in mobile
tough Denison T6H20C (dry and wet versions) and the
hydraulic power applications such as excavators and cranes,
demanding Eaton Vickers 35VQ25. Shell Tellus S2 MX
except where significant ambient temperature variations are
fluids can help system components last longer.
encountered. For these applications we recommend Shell
Maintaining system efficiency
Tellus S2 VX.
Excellent filterability and high performance water
·
Marine hydraulic systems
separation, air release and antifoam characteristics all help
Suitable for marine applications where ISO HM category
contribute to maintaining or enhancing the efficiency of
hydraulic fluids are recommended.
hydraulic systems. Optimization of friction characteristics
Specifications, Approvals & Recommendations
also helps reduce harmful stick-slip effects.
Product is designed to meet :
An oil cleanliness particle count of ISO 4406 20/18/15 or
better (measured at the point of filling) helps reduce the
impact of contaminants on filter blocking, allowing both
extended filter life and enhancing equipment protection.
Page 1 of 3
·
·
·
·
Eaton E-FDGN-TB002-E
ISO 11158 (HM fluids)
DIN 51524 Part 2 HLP type
ASTM D6158-05 (HM fluids)
Tellus S2 MX 100 (2016), v 4.1
05.07.2016.21.25
·
For a full listing of equipment approvals and
recommendations, please consult your local Shell
Shell Tellus S2 MX fluids are compatible with most other
Technical Helpdesk.
mineral oil based hydraulic fluids. However, mineral oil
hydraulic fluids should not be mixed with other fluid types
Compatibility & Miscibility
·
Fluid Compatibility
Compatibility
Shell Tellus S2 MX fluids are suitable for use with most
·
(e.g. environmentally acceptable or fire resistant fluids).
Seal & Paint Compatibility
Shell Tellus S2 MX fluids are compatible with seal materials
hydraulic pumps.
and paints normally specified for use with mineral oils.
Typical Physical Characteristics
Properties
Method
ISO Fluid Type
Shell Tellus S2 MX 100
HM
Kinematic Viscosity
@320F
cSt
ASTM D445
1800
Kinematic Viscosity
@1040F
cSt
ASTM D445
100
Kinematic Viscosity
@2120F
cSt
ASTM D445
11.7
ISO 2909
105
kg/l
ISO 12185
0.870
Flash Point (COC)
0
ISO 2592
464
Pour Point
0
ISO 3016
-11.2
ASTM D1500
L0.5
Viscosity Index
Density
@150C
F
F
Colour
Water Separation
minutes
ASTM D1401
20
TOST life
hours minimum
ASTM D943
5000
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Tellus S2 MX hydraulic fluid is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Tellus S2 MX 100 (2016), v 4.1
05.07.2016.21.25
Page 3 of 3
Tellus S2 MX 100 (2016), v 4.1
05.07.2016.21.25
Technical Data Sheet
•
•
•
•
Shell Tellus S2 VX 15
Long Oil Life
Extra Protection
Maintain System Efficiency
Versatile Applications
High Performance Hydraulic Fluid, Group II Base Oil Technology, Versatile Applications
Shell Tellus S2 VX fluids are high performance hydraulic fluids based on Group II base oils that provide
outstanding protection and performance across a wide range of temperatures. They resist breakdown under heat
or mechanical stress and are ideally suited to most mobile equipment and other applications subjected to a wider
range of ambient or operating temperatures.
Performance, Features & Benefits
·
An oil cleanliness particle count of ISO 4406 20/18/15 or
better (measured at the point of filling) helps reduce the
Long fluid life – maintenance saving
impact of contaminants on filter blocking, allowing both
Shell Tellus S2 VX fluids help extend equipment
extended filter life and enhancing equipment protection.
maintenance intervals by resisting thermal and chemical
breakdown. This minimizes any harmful sludge formation
Shell Tellus S2 VX fluids are formulated for exceptional foam
and provides better reliability and system cleanliness.
control and excellent air release to facilitate efficient
hydraulic power transfer and minimise fluid and equipment
Shell Tellus S2 VX fluids also have good stability in the
impacts of cavitation induced oxidation that can shorten fluid
presence of moisture, which ensures long fluid life and
life.
reduces the risk of corrosion and rusting, particularly in
moist or humid environments.
Main Applications
Highly shear stable viscosity modifiers help minimize
variations in the fluid properties throughout the service life
·
of the fluid.
·
Outstanding wear protection
Tellus S2 VX is designed to meet the demands of hydraulic
Hydraulic and fluid power transmission systems in exposed
systems well in to the future, including enhanced extreme
environments can be subject to wide variations in
pressure performance in the FZG test (FLS 11 at ISO VG
temperature. The high viscosity index of Shell Tellus S2 VX
32). It also demonstrates excellent performance in the
helps deliver responsive performance from cold start
tough Denison T6H20C (dry and wet versions) and the
conditions to full load, severe duty operation.
demanding Eaton Vickers 35VQ25. Shell Tellus S2 VX
·
Mobile/exterior hydraulic systems
fluids can help system components last longer.
·
Precision hydraulic systems require excellent control of fluid
viscosity over the operating cycle. Shell Tellus S2 VX
Maintaining system efficiency
provides greater temperature-viscosity stability compared to
Excellent filterability and high performance water
ISO HM fluids that can help improve the performance of
separation, air release and antifoam characteristics all help
contribute to maintaining or enhancing the efficiency of
hydraulic systems. Optimization of friction characteristics
also helps reduce harmful stick-slip effects.
Precision hydraulic systems
·
such systems.
Marine hydraulic systems
Suitable for marine applications where ISO HV category
hydraulic fluids are recommended.
Page 1 of 3
Tellus S2 VX 15 (2016), v 4.3
09.09.2016.10.32
Specifications, Approvals & Recommendations
Product is designed to meet :
·
·
·
·
Compatibility & Miscibility
·
Compatibility
Eaton E-FDGN-TB002-E
Shell Tellus S2 VX fluids are suitable for use with most
ISO 11158 (HV fluids)
hydraulic pumps.
·
DIN 51524 Part 3 HVLP type
Fluid Compatibility
Shell Tellus S2 VX fluids are compatible with most other
ASTM D6158 (HV fluids)
mineral oil based hydraulic fluids. However, mineral oil
For a full listing of equipment approvals and
hydraulic fluids should not be mixed with other fluid types
recommendations, please consult your local Shell
·
Technical Helpdesk.
(e.g. environmentally acceptable or fire resistant fluids).
Seal & Paint Compatibility
Shell Tellus S2 VX fluids are compatible with seal materials
and paints normally specified for use with mineral oils.
Typical Physical Characteristics
Properties
Method
ISO Fluid Type
Kinematic Viscosity
Kinematic Viscosity
Kinematic Viscosity
@-200C
0
@40 C
0
@100 C
cSt
ASTM D445
350
cSt
ASTM D445
15
cSt
ASTM D445
3.7
ISO 2909
143
Viscosity Index
Shear Stability
Density
0
@100 C
0
@15 C
Flash Point (COC)
Shell Tellus S2 VX 15
HV
% loss
CEC L45-A-99
kg/l
ISO 12185
0.820
0
ISO 2592
200
ASTM D1500
L0.5
C
Colour
3
Water Separation
minutes
ASTM D1401
20
TOST life
hours minimum
ASTM D943
5000
Pour Point
0
ISO 3016
C
-42
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Tellus S2 VX hydraulic fluid is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Tellus S2 VX 15 (2016), v 4.3
09.09.2016.10.32
Page 3 of 3
Tellus S2 VX 15 (2016), v 4.3
09.09.2016.10.32
Technical Data Sheet
•
•
•
•
Shell Tellus S2 VX 32
Long Oil Life
Extra Protection
Maintain System Efficiency
Versatile Applications
High Performance Hydraulic Fluid, Group II Base Oil Technology, Versatile Applications
Shell Tellus S2 VX fluids are high performance hydraulic fluids based on Group II base oils that provide
outstanding protection and performance across a wide range of temperatures. They resist breakdown under heat
or mechanical stress and are ideally suited to most mobile equipment and other applications subjected to a wider
range of ambient or operating temperatures.
Performance, Features & Benefits
·
An oil cleanliness particle count of ISO 4406 20/18/15 or
better (measured at the point of filling) helps reduce the
Long fluid life – maintenance saving
impact of contaminants on filter blocking, allowing both
Shell Tellus S2 VX fluids help extend equipment
extended filter life and enhancing equipment protection.
maintenance intervals by resisting thermal and chemical
breakdown. This minimizes any harmful sludge formation
Shell Tellus S2 VX fluids are formulated for exceptional foam
and provides better reliability and system cleanliness.
control and excellent air release to facilitate efficient
hydraulic power transfer and minimise fluid and equipment
Shell Tellus S2 VX fluids also have good stability in the
impacts of cavitation induced oxidation that can shorten fluid
presence of moisture, which ensures long fluid life and
life.
reduces the risk of corrosion and rusting, particularly in
moist or humid environments.
Main Applications
Highly shear stable viscosity modifiers help minimize
variations in the fluid properties throughout the service life
·
of the fluid
·
Outstanding wear protection
Tellus S2 VX is designed to meet the demands of hydraulic
Hydraulic and fluid power transmission systems in exposed
systems well in to the future, including enhanced extreme
environments can be subject to wide variations in
pressure performance in the FZG test (FLS 11 at ISO VG
temperature. The high viscosity index of Shell Tellus S2 VX
32). It also demonstrates excellent performance in the
helps deliver responsive performance from cold start
tough Denison T6H20C (dry and wet versions) and the
conditions to full load, severe duty operation.
demanding Eaton Vickers 35VQ25. Shell Tellus S2 VX
·
Mobile/exterior hydraulic systems
fluids can help system components last longer.
·
Precision hydraulic systems require excellent control of fluid
viscosity over the operating cycle. Shell Tellus S2 VX
Maintaining system efficiency
provides greater temperature-viscosity stability compared to
Excellent filterability and high performance water
ISO HM fluids that can help improve the performance of
separation, air release and antifoam characteristics all help
contribute to maintaining or enhancing the efficiency of
hydraulic systems. Optimization of friction characteristics
also helps reduce harmful stick-slip effects.
Precision hydraulic systems
·
such systems.
Marine hydraulic systems
Suitable for marine applications where ISO HV category
hydraulic fluids are recommended.
Page 1 of 3
Tellus S2 VX 32 (2016), v 4.3
05.07.2016.07.18
Specifications, Approvals & Recommendations
Product is designed to meet :
·
·
·
·
·
·
·
Compatibility & Miscibility
·
Compatibility
Parker Denison (HF-0, HF-1, HF-2)
Shell Tellus S2 VX fluids are suitable for use with most
Eaton E-FDGN-TB002-E
hydraulic pumps.
·
Fives (Cincinnati Machine) P-68
Fluid Compatibility
Shell Tellus S2 VX fluids are compatible with most other
ISO 11158 (HV fluids)
mineral oil based hydraulic fluids. However, mineral oil
DIN 51524 Part 3 HVLP type
hydraulic fluids should not be mixed with other fluid types
ASTM D6158 (HV fluids)
·
Swedish Standard SS 15 54 34 AM
For a full listing of equipment approvals and
(e.g. environmentally acceptable or fire resistant fluids).
Seal & Paint Compatibility
Shell Tellus S2 VX fluids are compatible with seal materials
recommendations, please consult your local Shell
and paints normally specified for use with mineral oils.
Technical Helpdesk.
Typical Physical Characteristics
Properties
Method
ISO Fluid Type
Shell Tellus S2 VX 32
HV
Kinematic Viscosity
@-200C
cSt
ASTM D445
1430
Kinematic Viscosity
@400C
cSt
ASTM D445
32
Kinematic Viscosity
@1000C
cSt
ASTM D445
6.1
ISO 2909
143
10
Viscosity Index
Shear Stability
@1000C
% loss
CEC L45-A-99
Density
@150C
kg/l
ISO 12185
0.854
0
ISO 2592
215
ASTM D1500
L0.5
Flash Point (COC)
C
Colour
Water Separation
minutes
ASTM D1401
20
TOST life
hours minimum
ASTM D943
5000
Pour Point
0
ISO 3016
C
-39
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Tellus S2 VX hydraulic fluid is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Tellus S2 VX 32 (2016), v 4.3
05.07.2016.07.18
Technical Data Sheet
•
•
•
•
Shell Tellus S2 VX 46
Long Oil Life
Extra Protection
Maintain System Efficiency
Versatile Applications
High Performance Hydraulic Fluid, Group II Base Oil Technology, Versatile Applications
Shell Tellus S2 VX fluids are high performance hydraulic fluids based on Group II base oils that provide
outstanding protection and performance across a wide range of temperatures. They resist breakdown under heat
or mechanical stress and are ideally suited to most mobile equipment and other applications subjected to a wider
range of ambient or operating temperatures.
Performance, Features & Benefits
·
An oil cleanliness particle count of ISO 4406 20/18/15 or
better (measured at the point of filling) helps reduce the
Long fluid life – maintenance saving
impact of contaminants on filter blocking, allowing both
Shell Tellus S2 VX fluids help extend equipment
extended filter life and enhancing equipment protection.
maintenance intervals by resisting thermal and chemical
breakdown. This minimizes any harmful sludge formation
Shell Tellus S2 VX fluids are formulated for exceptional foam
and provides better reliability and system cleanliness.
control and excellent air release to facilitate efficient
hydraulic power transfer and minimise fluid and equipment
Shell Tellus S2 VX fluids also have good stability in the
impacts of cavitation induced oxidation that can shorten fluid
presence of moisture, which ensures long fluid life and
life.
reduces the risk of corrosion and rusting, particularly in
moist or humid environments.
Main Applications
Highly shear stable viscosity modifiers help minimize
variations in the fluid properties throughout the service life
·
of the fluid
·
Outstanding wear protection
Tellus S2 VX is designed to meet the demands of hydraulic
Hydraulic and fluid power transmission systems in exposed
systems well in to the future, including enhanced extreme
environments can be subject to wide variations in
pressure performance in the FZG test (FLS 11 at ISO VG
temperature. The high viscosity index of Shell Tellus S2 VX
32). It also demonstrates excellent performance in the
helps deliver responsive performance from cold start
tough Denison T6H20C (dry and wet versions) and the
conditions to full load, severe duty operation.
demanding Eaton Vickers 35VQ25. Shell Tellus S2 VX
·
Mobile/exterior hydraulic systems
fluids can help system components last longer.
·
Precision hydraulic systems require excellent control of fluid
viscosity over the operating cycle. Shell Tellus S2 VX
Maintaining system efficiency
provides greater temperature-viscosity stability compared to
Excellent filterability and high performance water
ISO HM fluids that can help improve the performance of
separation, air release and antifoam characteristics all help
contribute to maintaining or enhancing the efficiency of
hydraulic systems. Optimization of friction characteristics
also helps reduce harmful stick-slip effects.
Precision hydraulic systems
·
such systems.
Marine hydraulic systems
Suitable for marine applications where ISO HV category
hydraulic fluids are recommended.
Page 1 of 3
Tellus S2 VX 46 (2016), v 4.3
05.07.2016.07.40
Specifications, Approvals & Recommendations
Product is designed to meet :
·
·
·
·
·
·
·
Compatibility & Miscibility
·
Compatibility
Parker Denison (HF-0, HF-1, HF-2)
Shell Tellus S2 VX fluids are suitable for use with most
Eaton E-FDGN-TB002-E
hydraulic pumps.
·
Fives (Cincinnati Machine) P-70
Fluid Compatibility
Shell Tellus S2 VX fluids are compatible with most other
ISO 11158 (HV fluids)
mineral oil based hydraulic fluids. However, mineral oil
DIN 51524 Part 3 HVLP type
hydraulic fluids should not be mixed with other fluid types
ASTM D6158 (HV fluids)
·
Swedish Standard SS 15 54 34 AM
For a full listing of equipment approvals and
(e.g. environmentally acceptable or fire resistant fluids).
Seal & Paint Compatibility
Shell Tellus S2 VX fluids are compatible with seal materials
recommendations, please consult your local Shell
and paints normally specified for use with mineral oils.
Technical Helpdesk.
Typical Physical Characteristics
Properties
Method
ISO Fluid Type
Shell Tellus S2 VX 46
HV
Kinematic Viscosity
@-200C
cSt
ASTM D445
2630
Kinematic Viscosity
@400C
cSt
ASTM D445
46
Kinematic Viscosity
@1000C
cSt
ASTM D445
7.9
ISO 2909
143
12
Viscosity Index
Shear Stability
@1000C
% loss
CEC L45-A-99
Density
@150C
kg/l
ISO 12185
0.856
0
ISO 2592
220
ASTM D1500
L0.5
Flash Point (COC)
C
Colour
Water Separation
minutes
ASTM D1401
20
TOST life
hours minimum
ASTM D943
5000
Pour Point
0
ISO 3016
C
-36
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Tellus S2 VX hydraulic fluid is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Tellus S2 VX 46 (2016), v 4.3
05.07.2016.07.40
Technical Data Sheet
•
•
•
•
Shell Tellus S2 VX 68
Long Oil Life
Extra Protection
Maintain System Efficiency
Versatile Applications
High Performance Hydraulic Fluid, Group II Base Oil Technology, Versatile Applications
Shell Tellus S2 VX fluids are high performance hydraulic fluids based on Group II base oils that provide
outstanding protection and performance across a wide range of temperatures. They resist breakdown under heat
or mechanical stress and are ideally suited to most mobile equipment and other applications subjected to a wider
range of ambient or operating temperatures.
Performance, Features & Benefits
·
An oil cleanliness particle count of ISO 4406 20/18/15 or
better (measured at the point of filling) helps reduce the
Long fluid life – maintenance saving
impact of contaminants on filter blocking, allowing both
Shell Tellus S2 VX fluids help extend equipment
extended filter life and enhancing equipment protection.
maintenance intervals by resisting thermal and chemical
breakdown. This minimizes any harmful sludge formation
Shell Tellus S2 VX fluids are formulated for exceptional foam
and provides better reliability and system cleanliness.
control and excellent air release to facilitate efficient
hydraulic power transfer and minimise fluid and equipment
Shell Tellus S2 VX fluids also have good stability in the
impacts of cavitation induced oxidation that can shorten fluid
presence of moisture, which ensures long fluid life and
life.
reduces the risk of corrosion and rusting, particularly in
moist or humid environments.
Main Applications
Highly shear stable viscosity modifiers help minimize
variations in the fluid properties throughout the service life
·
of the fluid
·
Outstanding wear protection
Tellus S2 VX is designed to meet the demands of hydraulic
Hydraulic and fluid power transmission systems in exposed
systems well in to the future, including enhanced extreme
environments can be subject to wide variations in
pressure performance in the FZG test (FLS 11 at ISO VG
temperature. The high viscosity index of Shell Tellus S2 VX
32). It also demonstrates excellent performance in the
helps deliver responsive performance from cold start
tough Denison T6H20C (dry and wet versions) and the
conditions to full load, severe duty operation.
demanding Eaton Vickers 35VQ25. Shell Tellus S2 VX
·
Mobile/exterior hydraulic systems
fluids can help system components last longer.
·
Precision hydraulic systems require excellent control of fluid
viscosity over the operating cycle. Shell Tellus S2 VX
Maintaining system efficiency
provides greater temperature-viscosity stability compared to
Excellent filterability and high performance water
ISO HM fluids that can help improve the performance of
separation, air release and antifoam characteristics all help
contribute to maintaining or enhancing the efficiency of
hydraulic systems. Optimization of friction characteristics
also helps reduce harmful stick-slip effects.
Precision hydraulic systems
·
such systems.
Marine hydraulic systems
Suitable for marine applications where ISO HV category
hydraulic fluids are recommended.
Page 1 of 3
Tellus S2 VX 68 (2016), v 4.3
05.07.2016.07.57
Specifications, Approvals & Recommendations
Product is designed to meet :
·
·
·
·
·
·
Compatibility & Miscibility
·
Compatibility
Parker Denison (HF-0, HF-1, HF-2)
Shell Tellus S2 VX fluids are suitable for use with most
Eaton E-FDGN-TB002-E
hydraulic pumps.
·
Fives (Cincinnati Machine) P-69
Fluid Compatibility
Shell Tellus S2 VX fluids are compatible with most other
ISO 11158 (HV fluids)
mineral oil based hydraulic fluids. However, mineral oil
DIN 51524 Part 3 HVLP type
hydraulic fluids should not be mixed with other fluid types
ASTM D6158 (HV fluids)
·
Swedish Standard SS 15 54 34 AM
For a full listing of equipment approvals and
(e.g. environmentally acceptable or fire resistant fluids).
Seal & Paint Compatibility
Shell Tellus S2 VX fluids are compatible with seal materials
recommendations, please consult your local Shell
and paints normally specified for use with mineral oils.
Technical Helpdesk.
Typical Physical Characteristics
Properties
Method
ISO Fluid Type
Shell Tellus S2 VX 68
HV
Kinematic Viscosity
@400C
cSt
ASTM D445
68
Kinematic Viscosity
@1000C
cSt
ASTM D445
10.5
ISO 2909
143
14
Viscosity Index
Shear Stability
@1000C
% loss
CEC L45-A-99
Density
@150C
kg/l
ISO 12185
0.860
0
ISO 2592
230
ASTM D1500
L0.5
Flash Point (COC)
C
Colour
Water Separation
minutes
ASTM D1401
20
TOST life
hours minimum
ASTM D943
5000
Pour Point
0
ISO 3016
C
-30
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Tellus S2 VX hydraulic fluid is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Tellus S2 VX 68 (2016), v 4.3
05.07.2016.07.57
Technical Data Sheet
•
•
•
•
Shell Tellus S2 VX 100
Long Oil Life
Extra Protection
Maintain System Efficiency
Versatile Applications
High Performance Hydraulic Fluid, Group II Base Oil Technology, Versatile Applications
Shell Tellus S2 VX fluids are high performance hydraulic fluids based on Group II base oils that provide
outstanding protection and performance across a wide range of temperatures. They resist breakdown under heat
or mechanical stress and are ideally suited to most mobile equipment and other applications subjected to a wider
range of ambient or operating temperatures.
Performance, Features & Benefits
·
An oil cleanliness particle count of ISO 4406 20/18/15 or
better (measured at the point of filling) helps reduce the
Long fluid life – maintenance saving
impact of contaminants on filter blocking, allowing both
Shell Tellus S2 VX fluids help extend equipment
extended filter life and enhancing equipment protection.
maintenance intervals by resisting thermal and chemical
breakdown. This minimizes any harmful sludge formation
Shell Tellus S2 VX fluids are formulated for exceptional foam
and provides better reliability and system cleanliness.
control and excellent air release to facilitate efficient
hydraulic power transfer and minimise fluid and equipment
Shell Tellus S2 VX fluids also have good stability in the
impacts of cavitation induced oxidation that can shorten fluid
presence of moisture, which ensures long fluid life and
life.
reduces the risk of corrosion and rusting, particularly in
moist or humid environments.
Main Applications
Highly shear stable viscosity modifiers help minimize
variations in the fluid properties throughout the service life
·
of the fluid
·
Outstanding wear protection
Tellus S2 VX is designed to meet the demands of hydraulic
Hydraulic and fluid power transmission systems in exposed
systems well in to the future, including enhanced extreme
environments can be subject to wide variations in
pressure performance in the FZG test (FLS 11 at ISO VG
temperature. The high viscosity index of Shell Tellus S2 VX
32). It also demonstrates excellent performance in the
helps deliver responsive performance from cold start
tough Denison T6H20C (dry and wet versions) and the
conditions to full load, severe duty operation.
demanding Eaton Vickers 35VQ25. Shell Tellus S2 VX
·
Mobile/exterior hydraulic systems
fluids can help system components last longer.
·
Precision hydraulic systems require excellent control of fluid
viscosity over the operating cycle. Shell Tellus S2 VX
Maintaining system efficiency
provides greater temperature-viscosity stability compared to
Excellent filterability and high performance water
ISO HM fluids that can help improve the performance of
separation, air release and antifoam characteristics all help
contribute to maintaining or enhancing the efficiency of
hydraulic systems. Optimization of friction characteristics
also helps reduce harmful stick-slip effects.
Precision hydraulic systems
·
such systems.
Marine hydraulic systems
Suitable for marine applications where ISO HV category
hydraulic fluids are recommended.
Page 1 of 3
Tellus S2 VX 100 (2016), v 4.4
12.09.2017.13.21
Specifications, Approvals & Recommendations
Compatibility & Miscibility
·
Product is designed to meet :
·
·
·
·
Compatibility
Eaton E-FDGN-TB002-E
Shell Tellus S2 VX fluids are suitable for use with most
ISO 11158 (HV fluids)
hydraulic pumps.
·
DIN 51524 Part 3 HVLP type
Fluid Compatibility
Shell Tellus S2 VX fluids are compatible with most other
ASTM D6158 (HV fluids)
mineral oil based hydraulic fluids. However, mineral oil
For a full listing of equipment approvals and
hydraulic fluids should not be mixed with other fluid types
recommendations, please consult your local Shell
·
Technical Helpdesk.
(e.g. environmentally acceptable or fire resistant fluids).
Seal & Paint Compatibility
Shell Tellus S2 VX fluids are compatible with seal materials
and paints normally specified for use with mineral oils.
Typical Physical Characteristics
Properties
Method
ISO Fluid Type
Shell Tellus S2 VX 100
HV
cSt
ASTM D445
100
cSt
ASTM D445
14.0
ISO 2909
143
% loss
CEC L45-A-99
15
kg/l
ISO 12185
0.870
Flash Point (COC)
0
ISO 2592
230
Pour Point
0
ISO 3016
-30
ASTM D1500
L0.5
Kinematic Viscosity
Kinematic Viscosity
@400C
0
@100 C
Viscosity Index
Shear Stability
Density
0
@100 C
0
@15 C
C
C
Colour
Water Separation
minutes
ASTM D1401
20
TOST life
hours minimum
ASTM D943
5000
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Tellus S2 VX hydraulic fluid is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Tellus S2 VX 100 (2016), v 4.4
12.09.2017.13.21
Page 3 of 3
Tellus S2 VX 100 (2016), v 4.4
12.09.2017.13.21
Technical Data Sheet
• Long life and improved efficiency
• Industrial applications
Shell Tellus S3 M 46
Premium Zinc-Free Industrial Hydraulic Fluid
Shell Tellus S3 M hydraulic fluids are high performance lubricants that use exclusive zinc-free technology to
provide outstanding protection and performance in most manufacturing and many mobile equipment operations.
They resist breakdown under heat or mechanical stress, helping to prevent damaging deposits that can decrease
the efficiency of your hydraulic system.
Performance, Features & Benefits
·
Main Applications
Long fluid life - maintenance saving
Shell Tellus S3 M fluids offer an improved capability to
extend fluid maintenance intervals and hence reduce
equipment downtime through:
·
Shell Tellus S3 M fluids are suitable for a wide range of
- An extended ASTM D943 TOST lifetime, with an oxidative
hydraulic power applications found in manufacturing and
stability that is designed for a minimum 5000 hours TOST
life.
- Excellent resistance to breakdown in the presence of
·
Severe duty hydraulic service
make them particularly suitable for severe duty (e.g. load,
These features provide extended maintenance capability
temperature) applications or where extended life is required
without compromising protection or performance, even
under severe or extended temperature range applications.
Outstanding wear protection
·
(e.g. Remote or inaccessible locations).
Marine and mobile hydraulic systems
Shell Tellus S3 M fluids are suitable for marine and mobile
Advanced zinc-free anti-wear additives provide protection
applications where ISO HM type hydraulic fluids are
over a wide range of conditions, including low and severe
duty, and high load operation. This protection has been
demonstrated in tough industry standard hydraulic pump
·
industrial environments.
The long-life characteristics of Shell Tellus S3 M fluids can
water and heat.
·
Manufacturing and industrial hydraulic systems
·
recommended.
Low toxicity towards the environment
tests such as the Denison T6H and Eaton Vickers 35VQ25
Shell Tellus S3 M has a reduced environmental impact in the
tests.
event of a leak or accidental spillage compared to
conventional zinc-based hydraulic fluids. This is achieved
Maintaining system efficiency
through the use of zinc-free anti-wear technology and low
Superior cleanliness and filterability; coupled with excellent
water separation, air release and anti-foam characteristics,
all help to maintain or enhance hydraulic system efficiency.
The filterability of Shell Tellus S3 M is maintained even
sulphur base oils. Shell Tellus S3 M is classified as 'not
harmful' to freshwater and marine invertebrates when tested
as water-accommodated fractions (WAFs) according to
OECD and EPA test guidelines.
when the fluid is contaminated with water.
For further reductions in environmental impact, we offer the
Shell Tellus S3 M fluids have a ISO 4406 cleanliness of
21/19/16 or better ex Shell filling lines. As recognized by
Shell Naturelle range of environmentally considerate
lubricants.
DIN 51524 specification, the oil is exposed to various
influences with transport and storage that could effect the
cleanliness level.
Page 1 of 3
For applications that experience wide temperature variations
we recommend the Shell Tellus “V” series of hydraulic fluids.
Tellus S3 M 46, v 4.3
17.11.2015.23.38
Specifications, Approvals & Recommendations
·
·
·
·
·
·
·
Compatibility & Miscibility
·
Denison Hydraulics (HF-0, HF-1 and HF-2)
Compatibility
Shell Tellus S3 M fluids are suitable for use with most
Eaton Vickers (Brochure 694)
Fives Cincinnati P-70 (ISO 46)
·
ISO 11158 (HM fluids)
hydraulic pumps.
Fluid Compatibility
Shell Tellus S3 M fluids are compatible with most other
DIN 51524-2 (HLP oils)
mineral oil based hydraulic fluids. However, mineral oil
ASTM 6158 (HM mineral oils)
hydraulic fluids should not be mixed with other fluid types
SS 15 54 34 M
(e.g. environmentally acceptable or fire-resistant fluids).
·
For a full listing of equipment approvals and
recommendations, please consult your local Shell
Seal & Paint Compatibility
Shell Tellus S3 M fluids are compatible with seal materials
Technical Helpdesk.
and paints normally specified for use with mineral oils.
Typical Physical Characteristics
Properties
Method
ISO 3448
ISO Viscosity Grade
Tellus S3 M 46
46
ISO 6743-4
HM
cSt
ASTM D445
565
cSt
ASTM D445
46
cSt
ASTM D445
6.8
ISO 2909
105
kg/m
ISO 12185
865
Flash Point (COC)
0
ASTM D92
220
Pour Point
0
ISO 3016
-33
ISO Fluid Type
Kinematic Viscosity
Kinematic Viscosity
Kinematic Viscosity
0
@0 C
0
@40 C
0
@100 C
Viscosity Index
Density
0
@15 C
3
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health & Safety
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Tellus S3 M 46, v 4.3
17.11.2015.23.38
Page 3 of 3
Tellus S3 M 46, v 4.3
17.11.2015.23.38
Technical Data Sheet
• Long life and improved efficiency
• Industrial applications
Shell Tellus S3 M 68
Premium Zinc-Free Industrial Hydraulic Fluid
Shell Tellus S3 M hydraulic fluids are high performance lubricants that use exclusive zinc-free technology to
provide outstanding protection and performance in most manufacturing and many mobile equipment operations.
They resist breakdown under heat or mechanical stress, helping to prevent damaging deposits that can decrease
the efficiency of your hydraulic system.
Performance, Features & Benefits
·
Main Applications
Long fluid life - maintenance saving
Shell Tellus S3 M fluids offer an improved capability to
extend fluid maintenance intervals and hence reduce
equipment downtime through:
·
Shell Tellus S3 M fluids are suitable for a wide range of
- An extended ASTM D943 TOST lifetime, with an oxidative
hydraulic power applications found in manufacturing and
stability that is designed for a minimum 5000 hours TOST
life.
- Excellent resistance to breakdown in the presence of
·
Severe duty hydraulic service
make them particularly suitable for severe duty (e.g. load,
These features provide extended maintenance capability
temperature) applications or where extended life is required
without compromising protection or performance, even
under severe or extended temperature range applications.
Outstanding wear protection
·
(e.g. Remote or inaccessible locations).
Marine and mobile hydraulic systems
Shell Tellus S3 M fluids are suitable for marine and mobile
Advanced zinc-free anti-wear additives provide protection
applications where ISO HM type hydraulic fluids are
over a wide range of conditions, including low and severe
duty, and high load operation. This protection has been
demonstrated in tough industry standard hydraulic pump
·
industrial environments.
The long-life characteristics of Shell Tellus S3 M fluids can
water and heat.
·
Manufacturing and industrial hydraulic systems
·
recommended.
Low toxicity towards the environment
tests such as the Denison T6H and Eaton Vickers 35VQ25
Shell Tellus S3 M has a reduced environmental impact in the
tests.
event of a leak or accidental spillage compared to
conventional zinc-based hydraulic fluids. This is achieved
Maintaining system efficiency
through the use of zinc-free anti-wear technology and low
Superior cleanliness and filterability; coupled with excellent
water separation, air release and anti-foam characteristics,
all help to maintain or enhance hydraulic system efficiency.
The filterability of Shell Tellus S3 M is maintained even
sulphur base oils. Shell Tellus S3 M is classified as 'not
harmful' to freshwater and marine invertebrates when tested
as water-accommodated fractions (WAFs) according to
OECD and EPA test guidelines.
when the fluid is contaminated with water.
For further reductions in environmental impact, we offer the
Shell Tellus S3 M fluids have a ISO 4406 cleanliness of
21/19/16 or better ex Shell filling lines. As recognized by
Shell Naturelle range of environmentally considerate
lubricants.
DIN 51524 specification, the oil is exposed to various
influences with transport and storage that could effect the
cleanliness level
Page 1 of 3
For applications that experience wide temperature variations
we recommend the Shell Tellus “V” series of hydraulic fluids.
Tellus S3 M 68, v 4.4
17.11.2015.23.39
Specifications, Approvals & Recommendations
·
·
·
·
·
·
·
Compatibility & Miscibility
·
Denison Hydraulics (HF-0, HF-1 and HF-2)
Compatibility
Shell Tellus S3 M fluids are suitable for use with most
Eaton Vickers (Brochure 694)
Fives Cincinnati P-69 (ISO 68)
·
ISO 11158 (HM fluids)
hydraulic pumps.
Fluid Compatibility
Shell Tellus S3 M fluids are compatible with most
DIN 51524-2 (HLP oils)
other mineral oil based hydraulic fluids. However,
ASTM 6158 (HM mineral oils)
mineral oil hydraulic fluids should not be mixed with
SS 15 54 34 M
other fluid types (e.g. environmentally acceptable or
For a full listing of equipment approvals and
fire-resistant fluids).
·
recommendations, please consult your local Shell
Technical Helpdesk.
Seal & Paint Compatibility
Shell Tellus S3 M fluids are compatible with seal
materials and paints normally specified for use with
mineral oils.
Typical Physical Characteristics
Properties
Method
ISO 3448
ISO Viscosity Grade
Tellus S3 M 68
68
ISO 6743-4
HM
cSt
ASTM D445
990
cSt
ASTM D445
68
cSt
ASTM D445
8.9
ISO 2909
105
kg/m
ISO 12185
870
Flash Point (COC)
0
ASTM D92
235
Pour Point
0
ISO 3016
-33
ISO Fluid Type
Kinematic Viscosity
Kinematic Viscosity
Kinematic Viscosity
0
@0 C
0
@40 C
0
@100 C
Viscosity Index
Density
0
@15 C
3
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health & Safety
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Tellus S3 M 68, v 4.4
17.11.2015.23.39
Page 3 of 3
Tellus S3 M 68, v 4.4
17.11.2015.23.39
Table of Content
No. Product Name
1.
Omala S1 W 460
2.
Omala S2 GX 68
3.
Omala S2 GX 100
4.
Omala S2 GX 150
5.
Omala S2 GX 220
6.
Omala S2 GX 320
7.
Omala S2 GX 460
8.
Omala S2 GX 680
9.
Omala S4 GXV 220
10.
Omala S4 GXV 320
11.
Omala S4 WE 220
12.
Omala S4 WE 320
Technical Data Sheet
Previous Name: Shell Valvata J
Shell Omala S1 W 460
• Reliable Protection
• Worm Drive Applications
Industrial Gear Oils
Shell Omala S1 W oils are quality refined, high viscosity mineral oils compounded with a small percentage of fatty
oils. They are particularly suitable for the lubrication of low speed enclosed gears and worm drive application. They
are also suitable for the lubrication of high temperature, high pressure steam cylinders.
· Steam cylinder lubrication
Performance, Features & Benefits
· Oil life – Maintenance saving
Suitable for steam cylinder applications working under high
Shell Omala S1 W possesses low volatility and a natural
temperature and high pressure conditions.
resistance to the formation of gummy or carbonaceous
For highly-loaded worm drives Shell Omala S4 WE is
deposits in high temperature conditions to give consistent
recommended.
performance through the lubrication maintenance intervals.
For industrial enclosed spur and helical gear systems the Shell
· Wear protection
Omala “G” series is recommended.
Provides a reliable oil film under low speed operation such as
For automotive hypoid gears, the appropriate Shell Spirax Oil
worm gear drives.
should be used.
Specifications, Approvals & Recommendations
Main Applications
· AGMA 9005-EO2 (CP)
For a full listing of equipment approvals and recommendations,
please consult your local Shell Technical Helpdesk.
· Enclosed industrial worm gear systems
Shell Omala S1 W may be used to advantage in worm gears
prone to suffer extensive wear and to reduce the bulk oil
temperature. Typical examples are gears running at low speed
under stop-start conditions.
Typical Physical Characteristics
Properties
ISO Viscosity Grade
Method
ISO 3448
Omala S1 W 460
460
Kinematic Viscosity
@400C
mm2/s
ISO 3104
460
Kinematic Viscosity
@1000C
mm2/s
ISO 3104
31.2
ISO 2909
98
kg/m3
ISO 12185
887
Flash Point (COC)
0
ISO 2592
318
Pour Point
0
ISO 3016
-6
Viscosity Index
Density
@150C
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Page 1 of 2
Shell Omala S1 W 460, v 1.1
28.08.2014.13.55
Health, Safety & Environment
· Health & Safety
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Shell Omala S1 W 460, v 1.1
28.08.2014.13.55
Technical Data Sheet
•
•
•
•
Shell Omala S2 GX 68
EXTRA PROTECTION
Against oxidation
Against wear & micropitting
Against corrosion & foaming
Industrial Gear Oils
Shell Omala S2 GX oils are high quality extreme-pressure (EP) oils designed primarily for the lubrication of heavy
duty industrial gearboxes. Their high load carrying capacity, protection against micropitting and compatibility with
seals and paints, combine to offer excellent performance in enclosed gear applications.
Performance, Features & Benefits
·
Main Applications
Long oil life through oxidation stability and resistance to
thermal stress – leading to reduced total cost of ownership
Shell Omala S2 GX oils are formulated to reduce the risk of
thermal and chemical breakdown throughout the
·
maintenance interval. They withstand high thermal loading
Shell Omala S2 GX technology provides an effective
and resist the formation of sludge to provide extended oil
extreme pressure (EP) formulation designed specifically for
life capability, even with bulk oil temperatures of up to
enclosed industrial gearboxes using steel-on-steel, spur,
0
·
·
Enclosed industrial gear systems
100 C.
helical, or planetary gear drives, including highly loaded
Excellent wear and micropitting protection
systems with splash or forced circulation systems.
Shell Omala S2 GX is formulated to have excellent load
Shell Omala S2 GX oils are also suitable for the lubrication
carrying capacity and micropitting performance, providing
of non-geared applications, that include bearings and other
long component life.
steel-on-steel components with splash or forced circulation
Gear system efficiency is maintained by optimized water
separation performance, corrosion and foam control
·
systems.
Other applications
Shell Omala S2 GX oils display a combination of excellent
Shell offers a wide range of products for other gear
water shedding capability, corrosion protection and low
applications that have their own specific requirements
foam forming tendency.
Water can greatly accelerate surface fatigue of gears and
·
Shell Omala S4 GXV is recommended for gear systems
where a synthetic lubricant is specified, when the longest
bearings as well as promoting ferrous corrosion on internal
lifespan is required, or when operating in environments that
surfaces. Excellent corrosion protection is provided, even in
experience large temperature variations.
the presence of contamination by seawater and solids.
The oils are designed to minimize the potential for foaming,
often experienced in applications where oil reservoir
residence times are marginal.
Excellent shear stability, maintains viscosity stability
throughout the service interval.
Further system efficiencies are gained through compatibility
with popular seals, sealants, and engineering adhesives, to
help avoid leakage. Shell Omala S2 GX is compatible with
prevalent paint finishes.
·
·
·
·
Shell Omala S5 Wind 320 is recommended for wind turbine
main gear drives.
Shell Omala S4 WE, Shell Morlina S4 B and Shell Omala S1
W are recommended for worm-wheel drives.
For automotive gear applications, the appropriate Shell
Spirax Oil should be used.
For geared systems, or other applications that employ a
filtration unit finer than 5 microns, please consult your Shell
Local Technical Advisor and Product Application Specialist
before using Shell Omala S2 GX.
Page 1 of 2
Omala S2 GX 68 (2015), v 1.8
04.09.2017.09.46
·
·
·
Specifications, Approvals & Recommendations
Meets requirements of:
·
·
·
ISO 12925-1 Type CKD (ISO 68)
AGMA EP 9005- F16 (ISO 68)
AIST (US Steel) 224 (ISO 68)
Fives Cincinnati: P-63 (ISO 68)
ISO 12925-1 Type CKC (ISO 68)
For a full listing of equipment approvals and
DIN 51517- Part 3 CLP (ISO 68)
recommendations, please consult your local Shell Technical
Help Desk.
Typical Physical Characteristics
Properties
Kinematic Viscosity
@ 400C
mm2/s
Method
ISO 3104
Shell Omala S2 GX 68
68
Kinematic Viscosity
@ 1000C
mm2/s
ISO 3104
8.7
ISO 2909
100
ISO 2592
>230
ISO 3016
-27
ISO 12185
885
Viscosity Index
Flash Point COC
0
Pour Point
0
Density
C
C
0
@ 15 C
3
Kg/m
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
This product is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on health and safety is available on the appropriate Material Safety Data Sheet (MSDS), which can be obtained
·
from http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell Representative
Page 2 of 2
Omala S2 GX 68 (2015), v 1.8
04.09.2017.09.46
Technical Data Sheet
•
•
•
•
Shell Omala S2 GX 100
EXTRA PROTECTION
Against oxidation
Against wear & micropitting
Against corrosion & foaming
Industrial Gear Oils
Shell Omala S2 GX oils are high quality extreme-pressure (EP) oils designed primarily for the lubrication of heavy
duty industrial gearboxes. Their high load carrying capacity, protection against micropitting and compatibility with
seals and paints, combine to offer excellent performance in enclosed gear applications.
Performance, Features & Benefits
·
Main Applications
Long oil life through oxidation stability and resistance to
thermal stress – leading to reduced total cost of ownership
Shell Omala S2 GX oils are formulated to reduce the risk of
thermal and chemical breakdown throughout the
·
maintenance interval. They withstand high thermal loading
Shell Omala S2 GX technology provides an effective
and resist the formation of sludge to provide extended oil
extreme pressure (EP) formulation designed specifically for
life capability, even with bulk oil temperatures of up to
enclosed industrial gearboxes using steel-on-steel, spur,
0
·
·
Enclosed industrial gear systems
100 C.
helical, or planetary gear drives, including highly loaded
Excellent wear and micropitting protection
systems with splash or forced circulation systems.
Shell Omala S2 GX is formulated to have excellent load
Shell Omala S2 GX oils are also suitable for the lubrication
carrying capacity and micropitting performance, providing
of non-geared applications, that include bearings and other
long component life.
steel-on-steel components with splash or forced circulation
Gear system efficiency is maintained by optimized water
separation performance, corrosion and foam control
·
systems.
Other applications
Shell Omala S2 GX oils display a combination of excellent
Shell offers a wide range of products for other gear
water shedding capability, corrosion protection and low
applications that have their own specific requirements
foam forming tendency.
·
Shell Omala S4 GXV is recommended for gear systems
Water can greatly accelerate surface fatigue of gears and
where a synthetic lubricant is specified, when the longest
bearings as well as promoting ferrous corrosion on internal
lifespan is required, or when operating in environments that
surfaces. Excellent corrosion protection is provided, even in
experience large temperature variations.
the presence of contamination by seawater and solids.
The oils are designed to minimize the potential for foaming,
often experienced in applications where oil reservoir
residence times are marginal.
Excellent shear stability, maintains viscosity stability
throughout the service interval.
Further system efficiencies are gained through compatibility
with popular seals, sealants, and engineering adhesives, to
help avoid leakage. Shell Omala S2 GX is compatible with
prevalent paint finishes.
·
·
·
·
Shell Omala S5 Wind 320 is recommended for wind turbine
main gear drives.
Shell Omala S4 WE, Shell Morlina S4 B and Shell Omala S1
W are recommended for worm-wheel drives.
For automotive gear applications, the appropriate Shell
Spirax Oil should be used.
For geared systems, or other applications that employ a
filtration unit finer than 5 microns, please consult your Shell
Local Technical Advisor and Product Application Specialist
before using Shell Omala S2 GX.
Page 1 of 2
Omala S2 GX 100 (2015), v 2.0
04.09.2017.08.31
·
·
·
Specifications, Approvals & Recommendations
Meets requirements of:
·
·
·
·
ISO 12925-1 Type CKD (ISO 100)
AIST (US Steel) 224 (ISO 100)
Fives Cincinnati: P-76 (ISO 100)
Approved or Recommended by:
ISO 12925-1 Type CKC (ISO 100)
Siemens AG
DIN 51517- Part 3 CLP (ISO 100)
Shell Omala S2 GX 100 is approved by Siemens AG for use
AGMA EP 9005- F16 (ISO 100)
in Flender, helical, bevel, planetary and marine gear units.
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Help Desk.
Typical Physical Characteristics
Properties
Kinematic Viscosity
Kinematic Viscosity
0
@ 40 C
0
@ 100 C
mm /s
Method
ISO 3104
Shell Omala S2 GX 100
100
mm2/s
ISO 3104
11.3
ISO 2909
99
2
Viscosity Index
Flash Point COC
0
ISO 2592
>230
Pour Point
0
C
ISO 3016
-24
Kg/m3
ISO 12185
891
Density
C
@ 150C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
This product is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on health and safety is available on the appropriate Material Safety Data Sheet (MSDS), which can be obtained
·
from http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell Representative
Page 2 of 2
Omala S2 GX 100 (2015), v 2.0
04.09.2017.08.31
Technical Data Sheet
•
•
•
•
Shell Omala S2 GX 150
EXTRA PROTECTION
Against oxidation
Against wear & micropitting
Against corrosion & foaming
Industrial Gear Oils
Shell Omala S2 GX oils are high quality extreme-pressure (EP) oils designed primarily for the lubrication of heavy
duty industrial gearboxes. Their high load carrying capacity, protection against micropitting and compatibility with
seals and paints, combine to offer excellent performance in enclosed gear applications.
Performance, Features & Benefits
·
Main Applications
Long oil life through oxidation stability and resistance to
thermal stress – leading to reduced total cost of ownership
Shell Omala S2 GX oils are formulated to reduce the risk of
thermal and chemical breakdown throughout the
·
maintenance interval. They withstand high thermal loading
Shell Omala S2 GX technology provides an effective
and resist the formation of sludge to provide extended oil
extreme pressure (EP) formulation designed specifically for
life capability, even with bulk oil temperatures of up to
enclosed industrial gearboxes using steel-on-steel, spur,
0
·
·
Enclosed industrial gear systems
100 C.
helical, or planetary gear drives, including highly loaded
Excellent wear and micropitting protection
systems with splash or forced circulation systems.
Shell Omala S2 GX is formulated to have excellent load
Shell Omala S2 GX oils are also suitable for the lubrication
carrying capacity and micropitting performance, providing
of non-geared applications, that include bearings and other
long component life.
steel-on-steel components with splash or forced circulation
Gear system efficiency is maintained by optimized water
separation performance, corrosion and foam control
·
systems.
Other applications
Shell Omala S2 GX oils display a combination of excellent
Shell offers a wide range of products for other gear
water shedding capability, corrosion protection and low
applications that have their own specific requirements
foam forming tendency.
Water can greatly accelerate surface fatigue of gears and
·
Shell Omala S4 GXV is recommended for gear systems
where a synthetic lubricant is specified, when the longest
bearings as well as promoting ferrous corrosion on internal
lifespan is required, or when operating in environments that
surfaces. Excellent corrosion protection is provided, even in
experience large temperature variations.
the presence of contamination by seawater and solids.
The oils are designed to minimize the potential for foaming,
often experienced in applications where oil reservoir
residence times are marginal.
Excellent shear stability, maintains viscosity stability
throughout the service interval.
Further system efficiencies are gained through compatibility
with popular seals, sealants, and engineering adhesives, to
help avoid leakage. Shell Omala S2 GX is compatible with
prevalent paint finishes.
·
·
·
·
Shell Omala S5 Wind 320 is recommended for wind turbine
main gear drives.
Shell Omala S4 WE, Shell Morlina S4 B and Shell Omala S1
W are recommended for worm-wheel drives.
For automotive gear applications, the appropriate Shell
Spirax Oil should be used.
For geared systems, or other applications that employ a
filtration unit finer than 5 microns, please consult your Shell
Local Technical Advisor and Product Application Specialist
before using Shell Omala S2 GX.
Page 1 of 2
Omala S2 GX 150 (2015), v 1.8
04.09.2017.08.54
·
·
·
Specifications, Approvals & Recommendations
Meets requirements of:
·
·
·
·
ISO 12925-1 Type CKD (ISO 150)
AIST (US Steel) 224 (ISO 150)
Fives Cincinnati: P-77 (ISO 150)
Approved or Recommended by:
ISO 12925-1 Type CKC (ISO 150)
Siemens AG
DIN 51517- Part 3 CLP (ISO 150)
Shell Omala S2 GX 150 is approved by Siemens AG for use
AGMA EP 9005- F16 (ISO 150)
in Flender, helical, bevel, planetary and marine gear units.
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Help Desk.
Typical Physical Characteristics
Properties
Kinematic Viscosity
Kinematic Viscosity
0
@ 40 C
0
@ 100 C
mm /s
Method
ISO 3104
Shell Omala S2 GX 150
150
mm2/s
ISO 3104
14.8
ISO 2909
98
2
Viscosity Index
Flash Point COC
0
ISO 2592
>240
Pour Point
0
C
ISO 3016
-24
Kg/m3
ISO 12185
897
Density
C
@ 150C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
This product is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on health and safety is available on the appropriate Material Safety Data Sheet (MSDS), which can be obtained
·
from http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell Representative
Page 2 of 2
Omala S2 GX 150 (2015), v 1.8
04.09.2017.08.54
Technical Data Sheet
•
•
•
•
Shell Omala S2 GX 220
EXTRA PROTECTION
Against oxidation
Against wear & micropitting
Against corrosion & foaming
Industrial Gear Oils
Shell Omala S2 GX oils are high quality extreme-pressure (EP) oils designed primarily for the lubrication of heavy
duty industrial gearboxes. Their high load carrying capacity, protection against micropitting and compatibility with
seals and paints, combine to offer excellent performance in enclosed gear applications.
Performance, Features & Benefits
·
Main Applications
Long oil life through oxidation stability and resistance to
thermal stress – leading to reduced total cost of ownership
Shell Omala S2 GX oils are formulated to reduce the risk of
thermal and chemical breakdown throughout the
·
maintenance interval. They withstand high thermal loading
Shell Omala S2 GX technology provides an effective
and resist the formation of sludge to provide extended oil
extreme pressure (EP) formulation designed specifically for
life capability, even with bulk oil temperatures of up to
enclosed industrial gearboxes using steel-on-steel, spur,
0
·
·
Enclosed industrial gear systems
100 C.
helical, or planetary gear drives, including highly loaded
Excellent wear and micropitting protection
systems with splash or forced circulation systems.
Shell Omala S2 GX is formulated to have excellent load
Shell Omala S2 GX oils are also suitable for the lubrication
carrying capacity and micropitting performance, providing
of non-geared applications, that include bearings and other
long component life.
steel-on-steel components with splash or forced circulation
Gear system efficiency is maintained by optimized water
separation performance, corrosion and foam control
·
systems.
Other applications
Shell Omala S2 GX oils display a combination of excellent
Shell offers a wide range of products for other gear
water shedding capability, corrosion protection and low
applications that have their own specific requirements
foam forming tendency.
·
Shell Omala S4 GXV is recommended for gear systems
Water can greatly accelerate surface fatigue of gears and
where a synthetic lubricant is specified, when the longest
bearings as well as promoting ferrous corrosion on internal
lifespan is required, or when operating in environments that
surfaces. Excellent corrosion protection is provided, even in
experience large temperature variations.
the presence of contamination by seawater and solids.
The oils are designed to minimize the potential for foaming,
often experienced in applications where oil reservoir
residence times are marginal.
Excellent shear stability, maintains viscosity stability
throughout the service interval.
Further system efficiencies are gained through compatibility
with popular seals, sealants, and engineering adhesives, to
help avoid leakage. Shell Omala S2 GX is compatible with
prevalent paint finishes.
·
·
·
·
Shell Omala S5 Wind 320 is recommended for wind turbine
main gear drives.
Shell Omala S4 WE, Shell Morlina S4 B and Shell Omala S1
W are recommended for worm-wheel drives.
For automotive gear applications, the appropriate Shell
Spirax Oil should be used.
For geared systems, or other applications that employ a
filtration unit finer than 5 microns, please consult your Shell
Local Technical Advisor and Product Application Specialist
before using Shell Omala S2 GX.
Page 1 of 2
Omala S2 GX 220 (2015), v 1.9
04.09.2017.09.09
·
·
Specifications, Approvals & Recommendations
Meets requirements of:
·
·
·
·
·
Fives Cincinnati: P-74 (ISO 220)
Approved or Recommended by:
ISO 12925-1 Type CKD (ISO 220)
Siemens AG
ISO 12925-1 Type CKC (ISO 220)
Shell Omala S2 GX 220 is approved by Siemens AG for use
DIN 51517- Part 3 CLP (ISO 220)
in Flender, helical, bevel, planetary and marine gear units.
AGMA EP 9005- F16 (ISO 220)
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
AIST (US Steel) 224 (ISO 220)
Help Desk.
Typical Physical Characteristics
Properties
Kinematic Viscosity
@ 400C
mm2/s
Method
ISO 3104
Shell Omala S2 GX 220
220
Kinematic Viscosity
@ 1000C
mm2/s
ISO 3104
19.0
ISO 2909
98
ISO 2592
>240
ISO 3016
-18
ISO 12185
899
Viscosity Index
Flash Point COC
0
Pour Point
0
Density
C
C
0
@ 15 C
3
Kg/m
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
This product is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on health and safety is available on the appropriate Material Safety Data Sheet (MSDS), which can be obtained
·
from http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell Representative
Page 2 of 2
Omala S2 GX 220 (2015), v 1.9
04.09.2017.09.09
Technical Data Sheet
•
•
•
•
Shell Omala S2 GX 320
EXTRA PROTECTION
Against contamination
Against oxidation
Against micropitting
Industrial Gear Oils
Shell Omala S2 GX oils are high quality extreme-pressure oils designed primarily for the lubrication of heavy duty
industrial gears. Their high load carrying capacity and anti-friction characteristics combine to offer superior
performance in gears.
Performance, Features & Benefits
Shell Omala S2 GX oils offers:
Performance Benefits can be summarised in
OMALA. C O M (Protection against Contamination,
·
Oxidation and Micropitting)
Handling Contamination and hence maintaining system
efficiency
·
·
·
Excellent micropitting performance to help prolong
component life.
Low sludge tendency, which reduces wear on rollers and
helps ensure bearing protection.
Outstanding corrosion protection, protecting steel
Shell Omala S2 GX oils display a combination of excellent
components, even in the presence of contamination by water
water shedding capability and low foaming tendency. The
and solids.
oils are designed to minimize the potential for foaming in
Shell Omala S2 GX oils offers excellent shear stability by
the most testing of environments.
maintaining its viscosity, thereby protecting the component
Shell Omala S2 GX oils have excellent water separation
from friction and wear.
properties, such that excess water can be drained easily
from lubrication systems to help extend the life of the gears
and ensure efficient lubrication of the contact areas.
Main Applications
·
Enclosed industrial gear systems
Shell Omala S2 GX technology provides an extreme EP
Water can greatly accelerate surface fatigue of gears and
system which allows trouble-free application in most
bearings as well as promoting ferrous corrosion on internal
enclosed industrial gearboxes using steel spur and helical
surfaces. Water contamination should therefore be
avoided or removed as quickly as possible after the
·
occurrence.
·
Highly loaded gears
Shell Omala S2 GX oils have an effective full extreme
Long oil life through Oxidation stability – leading to
pressure (EP) additive system allowing them to be used in
maintenance saving
Shell Omala S2 GX oils are formulated to reduce the risk of
thermal and chemical breakdown throughout the
maintenance interval. They withstand high thermal loading
and resist the formation of sludge to provide extended oil
life capability, even with bulk oil temperatures of up to
·
gear drives with circulation or splash lubrication systems.
1000C in certain applications.
·
highly-loaded gear systems.
Other applications
Shell Omala S2 GX oils are suitable for lubrication of
bearings and other components in circulating and splashlubricated systems. For loaded worm drives Shell Omala S4
WE, Shell Morlina S4 B and Shell Omala S1 W are
recommended. For automotive hypoid gears, the appropriate
Excellent wear & corrosion protection incl. protection
against Micro-pitting
Shell Spirax Oil should be used.
Shell do not recommend/support use in systems with fine
Shell Omala S2 GX oils have superb load carrying capacity
filtration (<10 microns) because sustained foam control
that helps reduce gear tooth and bearing wear on steel
performance is not assured. Please consult your Shell Local
components.
Technical Advisor and Product Application Specialist.
Page 1 of 2
Omala S2 GX 320 (2015), v 1.4
11.03.2016.20.09
·
Specifications, Approvals & Recommendations
Shell Omala S2 GX 150, 220, 320, 460 and 680 are
Meets requirements of:
·
·
·
·
·
·
Siemens AG
ISO 12925-1 Type CKD (ISO 68 through 460)
approved by Siemens AG for use in Flender gearboxes.
ISO 12925-1 Type CKC (ISO 680, 1000)
For a full listing of equipment approvals and
DIN 51517- Part 3 CLP (ISO 68 through 1000)
recommendations, please consult your local Shell Technical
Help Desk.
AGMA EP 9005- EO2 (ISO 68 through 1000)
Compatibility & Miscibility
AIST (US Steel) 224 (ISO 68 through 680)
Fives Cincinnati P-63 (ISO 68), P-76 (ISO 100), P-77 (ISO
Shell Omala S2 GX oils are compatible with various seal
150), P-74 (ISO 220), P-59 (ISO 320), P-35 (ISO 460), P-
materials to help prevent premature failure of seals and thus
34 (ISO 680), P-78 (ISO 1000)
avoid leakage.
Typical Physical Characteristics
Properties
Kinematic Viscosity
@ 400C
mm2/s
Method
ISO 3104
Shell Omala S2 GX 320
320
Kinematic Viscosity
@ 1000C
mm2/s
ISO 3104
24.4
ISO 2909
97
ISO 2592
>250
ISO 3016
-15
ISO 12185
897
Viscosity Index
Flash Point COC
0
Pour Point
0
Density
C
C
0
@ 15 C
3
Kg/m
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
This product is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on health and safety is available on the appropriate Material Safety Data Sheet (MSDS), which can be obtained
·
from http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell Representative
Page 2 of 2
Omala S2 GX 320 (2015), v 1.4
11.03.2016.20.09
Technical Data Sheet
•
•
•
•
Shell Omala S2 GX 460
EXTRA PROTECTION
Against contamination
Against oxidation
Against micropitting
Industrial Gear Oils
Shell Omala S2 GX oils are high quality extreme-pressure oils designed primarily for the lubrication of heavy duty
industrial gears. Their high load carrying capacity and anti-friction characteristics combine to offer superior
performance in gears.
Performance, Features & Benefits
Shell Omala S2 GX oils offers:
Performance Benefits can be summarised in
OMALA. C O M (Protection against Contamination,
·
Oxidation and Micropitting)
Handling Contamination and hence maintaining system
efficiency
·
·
·
Excellent micropitting performance to help prolong
component life.
Low sludge tendency, which reduces wear on rollers and
helps ensure bearing protection
Outstanding corrosion protection, protecting steel
Shell Omala S2 GX oils display a combination of excellent
components, even in the presence of contamination by water
water shedding capability and low foaming tendency. The
and solids.
oils are designed to minimize the potential for foaming in
Shell Omala S2 GX oils offers excellent shear stability by
the most testing of environments.
maintaining its viscosity, thereby protecting the component
Shell Omala S2 GX oils have excellent water separation
from friction and wear.
properties, such that excess water can be drained easily
from lubrication systems to help extend the life of the gears
and ensure efficient lubrication of the contact areas.
Main Applications
·
Enclosed industrial gear systems
Shell Omala S2 GX technology provides an extreme EP
Water can greatly accelerate surface fatigue of gears and
system which allows trouble-free application in most
bearings as well as promoting ferrous corrosion on internal
enclosed industrial gearboxes using steel spur and helical
surfaces. Water contamination should therefore be
avoided or removed as quickly as possible after the
·
occurrence.
·
Highly loaded gears
Shell Omala S2 GX oils have an effective full extreme
Long oil life through Oxidation stability – leading to
pressure (EP) additive system allowing them to be used in
maintenance saving
Shell Omala S2 GX oils are formulated to reduce the risk of
thermal and chemical breakdown throughout the
maintenance interval. They withstand high thermal loading
and resist the formation of sludge to provide extended oil
life capability, even with bulk oil temperatures of up to
·
gear drives with circulation or splash lubrication systems.
1000C in certain applications.
·
highly-loaded gear systems.
Other applications
Shell Omala S2 GX oils are suitable for lubrication of
bearings and other components in circulating and splashlubricated systems. For loaded worm drives Shell Omala S4
WE, Shell Morlina S4 B and Shell Omala S1 W are
recommended. For automotive hypoid gears, the appropriate
Excellent wear & corrosion protection incl. protection
against Micro-pitting
Shell Spirax Oil should be used.
Shell do not recommend/support use in systems with fine
Shell Omala S2 GX oils have superb load carrying capacity
filtration (<10 microns) because sustained foam control
that helps reduce gear tooth and bearing wear on steel
performance is not assured. Please consult your Shell Local
components.
Technical Advisor and Product Application Specialist.
Page 1 of 2
Omala S2 GX 460 (2015), v 1.3
11.03.2016.20.11
·
Specifications, Approvals & Recommendations
Shell Omala S2 GX 150, 220, 320, 460 and 680 are
Meets requirements of:
·
·
·
·
·
·
Siemens AG
ISO 12925-1 Type CKD (ISO 68 through 460)
approved by Siemens AG for use in Flender gearboxes.
ISO 12925-1 Type CKC (ISO 680, 1000)
For a full listing of equipment approvals and
DIN 51517- Part 3 CLP (ISO 68 through 1000)
recommendations, please consult your local Shell Technical
Help Desk.
AGMA EP 9005- EO2 (ISO 68 through 1000)
Compatibility & Miscibility
AIST (US Steel) 224 (ISO 68 through 680)
Fives Cincinnati (MAG IAS) P-63 (ISO 68), P-76 (ISO 100),
Shell Omala S2 GX oils are compatible with various seal
P-77 (ISO 150), P-74 (ISO 220), P-59 (ISO 320), P-35 (ISO
materials to help prevent premature failure of seals and thus
460), P-34 (ISO 680), P-78 (ISO 1000)
avoid leakage.
Typical Physical Characteristics
Properties
Kinematic Viscosity
@ 400C
mm2/s
Method
ISO 3104
Shell Omala S2 GX 460
460
Kinematic Viscosity
@ 1000C
mm2/s
ISO 3104
30.6
ISO 2909
96
ISO 2592
>250
ISO 3016
-12
ISO 12185
903
Viscosity Index
Flash Point COC
0
Pour Point
0
Density
C
C
0
@ 15 C
3
Kg/m
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
This product is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on health and safety is available on the appropriate Material Safety Data Sheet (MSDS), which can be obtained
·
from http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell Representative
Page 2 of 2
Omala S2 GX 460 (2015), v 1.3
11.03.2016.20.11
Technical Data Sheet
•
•
•
•
Shell Omala S2 GX 680
EXTRA PROTECTION
Against oxidation
Against wear & micropitting
Against corrosion & foaming
Industrial Gear Oils
Shell Omala S2 GX oils are high quality extreme-pressure (EP) oils designed primarily for the lubrication of heavy
duty industrial gearboxes. Their high load carrying capacity, protection against micropitting and compatibility with
seals and paints, combine to offer excellent performance in enclosed gear applications.
Performance, Features & Benefits
·
Main Applications
Long oil life through oxidation stability and resistance to
thermal stress – leading to reduced total cost of ownership
Shell Omala S2 GX oils are formulated to reduce the risk of
thermal and chemical breakdown throughout the
·
maintenance interval. They withstand high thermal loading
Shell Omala S2 GX technology provides an effective
and resist the formation of sludge to provide extended oil
extreme pressure (EP) formulation designed specifically for
life capability, even with bulk oil temperatures of up to
enclosed industrial gearboxes using steel-on-steel, spur,
0
·
·
Enclosed industrial gear systems
100 C.
helical, or planetary gear drives, including highly loaded
Excellent wear and micropitting protection
systems with splash or forced circulation systems.
Shell Omala S2 GX is formulated to have excellent load
Shell Omala S2 GX oils are also suitable for the lubrication
carrying capacity and micropitting performance, providing
of non-geared applications, that include bearings and other
long component life.
steel-on-steel components with splash or forced circulation
Gear system efficiency is maintained by optimized water
separation performance, corrosion and foam control
·
systems.
Other applications
Shell Omala S2 GX oils display a combination of excellent
Shell offers a wide range of products for other gear
water shedding capability, corrosion protection and low
applications that have their own specific requirements
foam forming tendency.
·
Shell Omala S4 GXV is recommended for gear systems
Water can greatly accelerate surface fatigue of gears and
where a synthetic lubricant is specified, when the longest
bearings as well as promoting ferrous corrosion on internal
lifespan is required, or when operating in environments that
surfaces. Excellent corrosion protection is provided, even in
experience large temperature variations.
the presence of contamination by seawater and solids.
The oils are designed to minimize the potential for foaming,
often experienced in applications where oil reservoir
residence times are marginal.
Excellent shear stability, maintains viscosity stability
throughout the service interval.
Further system efficiencies are gained through compatibility
with popular seals, sealants, and engineering adhesives, to
help avoid leakage. Shell Omala S2 GX is compatible with
prevalent paint finishes.
·
·
·
·
Shell Omala S5 Wind 320 is recommended for wind turbine
main gear drives.
Shell Omala S4 WE, Shell Morlina S4 B and Shell Omala S1
W are recommended for worm-wheel drives.
For automotive gear applications, the appropriate Shell
Spirax Oil should be used.
For geared systems, or other applications that employ a
filtration unit finer than 5 microns, please consult your Shell
Local Technical Advisor and Product Application Specialist
before using Shell Omala S2 GX.
Page 1 of 2
Omala S2 GX 680 (2015), v 1.7
04.09.2017.10.01
Specifications, Approvals & Recommendations
Approved or Recommended by
·
Meets requirements of:
·
·
·
·
Siemens AG
ISO 12925-1 Type CKC (ISO 680)
Shell Omala S2 GX 680 is approved by Siemens AG for use
DIN 51517- Part 3 CLP (ISO 680)
in Flender, helical, bevel, planetary and marine gear units.
AGMA EP 9005- F16 (ISO 680)
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Fives Cincinnati: P-34 (ISO 680)
Help Desk.
Typical Physical Characteristics
Properties
Kinematic Viscosity
@ 400C
mm2/s
Method
ISO 3104
Shell Omala S2 GX 680
680
Kinematic Viscosity
@ 1000C
mm2/s
ISO 3104
42.1
ISO 2909
105
ISO 2592
>250
ISO 3016
-9
ISO 12185
912
Viscosity Index
Flash Point COC
0
Pour Point
0
Density
C
C
0
@ 15 C
3
Kg/m
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
This product is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on health and safety is available on the appropriate Material Safety Data Sheet (MSDS), which can be obtained
·
from http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell Representative
Page 2 of 2
Omala S2 GX 680 (2015), v 1.7
04.09.2017.10.01
Technical Data Sheet
Shell Omala S4 GXV 220
• Extra Life and Protection
• Special Applications
Advanced Synthetic Industrial Gear Oil
Shell Omala S4 GXV 220 is an advanced synthetic heavy duty industrial gear oil, approved by Siemens AG,
offering outstanding lubrication performance under severe operating conditions, including reduced friction, long
service life, high resistance to micro-pitting for optimal gear protection and superb compatibility with seals.
Performance, Features & Benefits
·
Main Applications
Long oil life - maintenance saving
Shell Omala S4 GXV 220 is formulated using an advanced
additive system in combination with specially selected
synthetic base fluids to provide outstanding resistance to
Shell Omala S4 GXV 220 is particularly recommended for
operation.
certain systems where extra long life is required,
0
temperatures up to 120 C. Shell Omala S4 GXV 220 offers
the potential to significantly extend service intervals
·
maintenance is infrequent or systems are inaccessible.
Excellent compatibility with seals, paints and sealants
Recommended for industrial reduction gear systems using a
compared to conventional industrial gear oils.
wide range of seals, including nitrile rubber and fluoro-
Excellent wear and corrosion protection
elastomers. Meets the demanding requirements of Siemens
Shell Omala S4 GXV 220 is formulated to have excellent
for Flender gearboxes and gear motors.
load carrying capacity and micro-pitting performance
providing long component life even under shock loading
·
Enclosed industrial gear systems
Recommended for industrial reduction gear systems
conditions. These features provide benefits over mineral
operating under severe operating conditions, such as high
oil-based products in terms of gear and bearing component
load, very low or elevated temperatures and wide
life.
temperature variations.
Shell Omala S4 GXV 220 also has excellent corrosion
protection, even in the presence of contamination by water
·
Gear motor systems and other inaccessible installations
breakdown over long duration and/or high temperature
Shell Omala S4 GXV 220 can operate successfully at bulk
·
·
and solids.
·
Other applications
Shell Omala S4 GXV 220 is suitable for lubrication of
bearings and other components in circulating and splash-
Maintaining system efficiency
lubricated systems.
Shell Omala S4 GXV 220 can help maintain or enhance the
For highly loaded worm drives the Shell Omala “W”series
efficiency of industrial gear systems through improved low
oils are recommended. For automotive hypoid gears, the
temperature performance and lower friction in comparison
appropriate Shell Spirax Oil should be used.
to mineral oil-based products. This provides better
lubrication at low start-up temperatures.
Page 1 of 2
Omala S4 GXV 220, v 1.4
02.11.2017.14.44
·
·
Specifications, Approvals & Recommendations
·
·
·
·
ISO 12925-1 Type CKD
China National Standard GB 5903-2011 CKD
AIST (US Steel) Req. No. 224
ANSI/AGMA 9005-F16
For a full listing of equipment approvals and
Siemens AG – Omala S4 GXV ISO 150 – 680 are approved
recommendations, please consult your local Shell Technical
by Siemens AG for use in Flender gearboxes and gear
Help Desk.
motors.
DIN 51517-3 (CLP)
Typical Physical Characteristics
Properties
Kinematic Viscosity
Kinematic Viscosity
0
@40 C
0
@100 C
mm /s
Method
ASTM D445
Shell Omala S4 GXV 220
220
mm2/s
ASTM D445
30
ASTM D2270
171
2
Viscosity Index
Flash Point (COC)
0
ASTM D92
240
Pour Point
0
C
ASTM D97
-42
kg/m3
ASTM D4052
864
Four Ball EP Weld load
kg minimum
ASTM D2783
250
FZG Load Carrying Test
failure load stage
minimum
A/8,3/90
14
Density
C minimum
@150C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Omala S4 GXV 220 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Change over procedure
Omala S4 GXV 220 is based on synthesized hydrocarbon fluids and is compatible with petroleum mineral oil-based
industrial gear lubricants - no special change-over procedure is necessary. However, to achieve the complete benefit of
Omala S4 GXV 220, it should not be mixed with other oils.
·
It is also advisable to ensure that oil systems are clean and free from contamination.
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Omala S4 GXV 220, v 1.4
02.11.2017.14.44
Technical Data Sheet
Shell Omala S4 GXV 320
• Extra Life and Protection
• Special Applications
Advanced Synthetic Industrial Gear Oil
Shell Omala S4 GXV 320 is an advanced synthetic heavy duty industrial gear oil, approved by Siemens AG,
offering outstanding lubrication performance under severe operating conditions, including reduced friction, long
service life, high resistance to micro-pitting for optimal gear protection and superb compatibility with seals.
Performance, Features & Benefits
·
Main Applications
Long oil life - maintenance saving
Shell Omala S4 GXV 320 is formulated using an advanced
additive system in combination with specially selected
synthetic base fluids to provide outstanding resistance to
Shell Omala S4 GXV 320 is particularly recommended for
operation.
certain systems where extra long life is required,
0
temperatures up to 120 C. Shell Omala S4 GXV 320 offers
the potential to significantly extend service intervals
·
maintenance is infrequent or systems are inaccessible.
Excellent compatibility with seals, paints and sealants
Recommended for industrial reduction gear systems using a
compared to conventional industrial gear oils.
wide range of seals, including nitrile rubber and fluoro-
Excellent wear and corrosion protection
elastomers. Meets the demanding requirements of Siemens
Shell Omala S4 GXV 320 is formulated to have excellent
for Flender gearboxes and gear motors.
load carrying capacity and micro-pitting performance
providing long component life even under shock loading
·
Enclosed industrial gear systems
Recommended for industrial reduction gear systems
conditions. These features provide benefits over mineral
operating under severe operating conditions, such as high
oil-based products in terms of gear and bearing component
load, very low or elevated temperatures and wide
life.
temperature variations.
Shell Omala S4 GXV 320 also has excellent corrosion
protection, even in the presence of contamination by water
·
Gear motor systems and other inaccessible installations
breakdown over long duration and/or high temperature
Shell Omala S4 GXV 320 can operate successfully at bulk
·
·
and solids.
·
Other applications
Shell Omala S4 GXV 320 is suitable for lubrication of
bearings and other components in circulating and splash-
Maintaining system efficiency
lubricated systems.
Shell Omala S4 GXV 320 can help maintain or enhance the
For highly loaded worm drives the Shell Omala “W”series
efficiency of industrial gear systems through improved low
oils are recommended. For automotive hypoid gears, the
temperature performance and lower friction in comparison
appropriate Shell Spirax Oil should be used.
to mineral oil-based products. This provides better
lubrication at low start-up temperatures.
Page 1 of 2
Omala S4 GXV 320, v 1.4
02.11.2017.14.49
·
·
Specifications, Approvals & Recommendations
·
·
·
·
ISO 12925-1 Type CKD
China National Standard GB 5903-2011 CKD
AIST (US Steel) Req. No. 224
ANSI/AGMA 9005-F16
For a full listing of equipment approvals and
Siemens AG – Omala S4 GXV ISO 150 – 680 are approved
recommendations, please consult your local Shell Technical
by Siemens AG for use in Flender gearboxes and gear
Help Desk.
motors.
DIN 51517-3 (CLP)
Typical Physical Characteristics
Properties
Kinematic Viscosity
Kinematic Viscosity
0
@40 C
0
@100 C
mm /s
Method
ASTM D445
Shell Omala S4 GXV 320
320
mm2/s
ASTM D445
37
ASTM D2270
169
2
Viscosity Index
Flash Point (COC)
0
ASTM D92
240
Pour Point
0
C
ASTM D97
-42
kg/m3
ASTM D4052
866
Four Ball EP Weld load
kg minimum
ASTM D2783
250
FZG Load Carrying Test
failure load stage
minimum
A/8,3/90
14
Density
C minimum
@150C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Omala S4 GXV 320 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Change over procedure
Omala S4 GXV 320 is based on synthesized hydrocarbon fluids and is compatible with petroleum mineral oil-based
industrial gear lubricants - no special change-over procedure is necessary. However, to achieve the complete benefit of
Omala S4 GXV 320, it should not be mixed with other oils.
·
It is also advisable to ensure that oil systems are clean and free from contamination.
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Omala S4 GXV 320, v 1.4
02.11.2017.14.49
Technical Data Sheet
Previous Name: Shell Tivela S
• Extra Protection & Life
• Energy Saving
• Worm Drive Applications
Shell Omala S4 WE 220
Advanced Synthetic Industrial Gear Oil
Shell Omala S4 WE is an advanced synthetic heavy duty industrial worm drive gear oil formulated using specially
selected polyalkylene glycol base fluids and additives. It offers outstanding lubrication performance under severe
operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting.
· Enclosed industrial worm gear systems
Performance, Features & Benefits
· Long oil life - maintenance saving
Recommended for industrial worm gear reduction systems
Shell Omala S4 WE is formulated to provide excellent
operating under severe operating conditions, such as high load,
oxidation and thermal stability, extending lubricant life and
very low or elevated temperatures and wide temperature
resisting the formation of harmful oxidation products at high
variations.
operating temperatures. This helps maintain system
· Extended life systems
cleanliness over extended maintenance intervals.
Shell Omala S4 WE is particularly recommended for certain
Shell Omala S4 WE offers the potential to extend service
systems where maintenance is infrequent or systems are
intervals significantly compared to conventional industrial gear
inaccessible (eg yaw gears in wind turbine installations).
· Other applications
oils.
· Excellent wear protection
Shell Omala S4 WE oils are suitable for lubrication of bearings
Shell Omala S4 WE is formulated to have excellent load
and other components in circulating and splash-lubricated
carrying capacity providing long component life even under
systems.
shock loading conditions. It also has a high resistance to
Shell Omala S4 WE is not recommended for the lubrication of
micro-pitting. These features provide benefits over mineral oil-
components manufactured from aluminium or aluminium alloys.
based products in terms of gear and bearing component life.
For highly-loaded spur and helical gears the Shell Omala “G”
· Maintaining system efficiency
series oils are recommended.
Shell Omala S4 WE offers improved energy efficiency and
For automotive hypoid gears, the appropriate Shell Spirax Oil
lower operating temperatures in worm gear applications. Rig
should be used.
testing has shown efficiency improvements of up to 15% in
Specifications, Approvals & Recommendations
comparison with mineral oil-based products and 11% over
· David Brown S1.53.105 G
· Fully approved by Bonfiglioli
· ISO 12925-1 Type CKE
· Ansi/Agma 9005-E02 (EP)
other synthetic hydrocarbon-based lubricants. These results
have been confirmed by OEM testing and field experience.
Main Applications
For a full listing of equipment approvals and recommendations,
please consult your local Shell Technical Helpdesk, or the OEM
Approvals website.
Page 1 of 3
Shell Omala S4 WE 220, v 4
25.06.2013.08.42
Compatibility & Miscibility
The system should be flushed with the minimum quantity of Shell
· Seal & Paint Compatibility
Omala S4 WE, operating under no load and draining whilst
High quality epoxy paints are recommended, as polyalkylene
warm. Ideally, seals exposed to mineral oils should also be
glycols will tend to attack certain conventional paints. Shell
replaced. Inspect the lubricant after a few days use. Ensure that
Omala S4 WE has been found to be satisfactory with nitrile
oil systems are clean and free from contamination.
and Viton seal materials, although Viton seals are preferred.
Shell Omala S4 WE is also not miscible with some other
· Change-over Procedure
polyalkylene glycols, so caution is needed when topping-up.
Shell Omala S4 WE contains polyalkylene glycols and is not
Generally the preference is to avoid mixtures by draining and
compatible with mineral oils or most other synthetic lubricant
refilling.
types. Care should be taken when changing from such
products to Shell Omala S4 WE.
Typical physical characteristics
Properties
Method
ICO 3448
Viscosity Grade
Shell Omala S4 WE
220
Kinematic Viscosity
@40°C
mm²/s
222
Kinematic Viscosity
@100°C
mm²/s
34.4
Viscosity Index
ISO 2909
203
Flash Point
°C
ISO 2592 (COC)
278
Pour Point
°C
ISO 3016
-39
kg/m³
ISO 12185
1074
density
FZG Load Carrying Test
@15°C
failure load stage DIN 51354-2
A/8.3/90
>12
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Health, Safety & Environment
· Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your shell representative.
Page 2 of 3
Shell Omala S4 WE 220, v 4
25.06.2013.08.42
Technical Data Sheet
Previous Name: Shell Tivela S
• Extra Protection & Life
• Energy Saving
• Worm Drive Applications
Shell Omala S4 WE 320
Advanced Synthetic Industrial Gear Oil
Shell Omala S4 WE is an advanced synthetic heavy duty industrial worm drive gear oil formulated using specially
selected polyalkylene glycol base fluids and additives. It offers outstanding lubrication performance under severe
operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting.
· Enclosed industrial worm gear systems
Performance, Features & Benefits
· Long oil life - maintenance saving
Recommended for industrial worm gear reduction systems
Shell Omala S4 WE is formulated to provide excellent
operating under severe operating conditions, such as high load,
oxidation and thermal stability, extending lubricant life and
very low or elevated temperatures and wide temperature
resisting the formation of harmful oxidation products at high
variations.
operating temperatures. This helps maintain system
cleanliness over extended maintenance intervals.
· Extended life systems
Shell Omala S4 WE is particularly recommended for certain
Shell Omala S4 WE offers the potential to extend service
systems where maintenance is infrequent or systems are
intervals significantly compared to conventional industrial gear
inaccessible (eg yaw gears in wind turbine installations).
· Other applications
oils.
· Excellent wear protection
Shell Omala S4 WE oils are suitable for lubrication of bearings
Shell Omala S4 WE is formulated to have excellent load
and other components in circulating and splash-lubricated
carrying capacity providing long component life even under
systems.
shock loading conditions. It also has a high resistance to
Shell Omala S4 WE is not recommended for the lubrication of
micro-pitting. These features provide benefits over mineral oil-
components manufactured from aluminium or aluminium alloys.
based products in terms of gear and bearing component life.
For highly-loaded spur and helical gears the Shell Omala “G”
· Maintaining system efficiency
series oils are recommended.
Shell Omala S4 WE offers improved energy efficiency and
For automotive hypoid gears, the appropriate Shell Spirax Oil
lower operating temperatures in worm gear applications. Rig
should be used.
testing has shown efficiency improvements of up to 15% in
Specifications, Approvals & Recommendations
comparison with mineral oil-based products and 11% over
· DIN 51517-3 (CLP)
· Fully approved by Bonfiglioli
· For a full listing of equipment approvals and recommendations,
other synthetic hydrocarbon-based lubricants. These results
have been confirmed by OEM testing and field experience.
Main Applications
Page 1 of 3
please consult your local Shell Technical Helpdesk.
Shell Omala S4 WE 320, v 4.1
11.10.2013.13.49
Compatibility & Miscibility
The system should be flushed with the minimum quantity of Shell
· Seal & Paint Compatibility
Omala S4 WE, operating under no load and draining whilst
High quality epoxy paints are recommended, as polyalkylene
warm. Ideally, seals exposed to mineral oils should also be
glycols will tend to attack certain conventional paints. Shell
replaced. Inspect the lubricant after a few days use. Ensure that
Omala S4 WE has been found to be satisfactory with nitrile
oil systems are clean and free from contamination.
and Viton seal materials, although Viton seals are preferred.
Shell Omala S4 WE is also not miscible with some other
· Change-over Procedure
polyalkylene glycols, so caution is needed when topping-up.
Shell Omala S4 WE contains polyalkylene glycols and is not
Generally the preference is to avoid mixtures by draining and
compatible with mineral oils or most other synthetic lubricant
refilling.
types. Care should be taken when changing from such
products to Shell Omala S4 WE.
Typical Physical Characteristics
Properties
Method
ISO 3448
Viscosity Grade
S4 WE
320
Kinematic Viscosity
@40°C
mm²/s
321
Kinematic Viscosity
@100°C
mm²/s
52.7
Viscosity Index
ISO 2909
230
Flash Point
°C
ISO 2592 (COC)
270
Pour Point
°C
ISO 3016
-39
kg/m³
ISO 12185
1069
Density
FZG Load Carrying Test
@15°C
failure load stage DIN 51354-2
A/8.3/90
>12
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Health, Safety & Environment
· Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Shell Omala S4 WE 320, v 4.1
11.10.2013.13.49
Page 3 of 3
Shell Omala S4 WE 320, v 4.1
11.10.2013.13.49
Table of Content
No. Product Name
1.
Spirax S2 ATF D2
2.
Spirax S3 ATF MD3
3.
Spirax S6 ATF A295
4.
Spirax S3 T
5.
Spirax S4 TXM
6.
Spirax S4 CX 30
7.
Spirax S4 CX 50
8.
Spirax S2 G 90
9.
Spirax S2 G 80W-90
10.
Spirax S2 G 140
11.
Spirax S3 G 80W-90
12.
Spirax S2 A 90
13.
Spirax S2 A 80W-90
14.
Spirax S2 A 140
15.
Spirax S3 AX 85W-140
Technical Data Sheet
Previous Name: Shell Donax TA
Shell Spirax S2 ATF D2
High Performance ATF, Power Steering and Hydraulic Oil On-Road Trucks and Cars
A high quality transmission fluid suitable for many passenger car and heavy-duty automatic transmissions, power
steering and hydraulic fluid applications.
· Passenger car automatic transmissions
· Heavy duty automatic transmissions
· Some off-road transmissions
· Power steering units
· Hydraulic power systems
Performance, Features & Benefits
· Friction modified
Provides consistent, reliable, smooth and trouble free
operation of many automotive transmission systems.
· High oxidation resistance
Resistance to oil degradation ensures consistent performance.
Specifications, Approvals & Recommendations
· Suitable for performance in applications requiring a Dexron IID
· Excellent shear-stability
A special 'VI' improver ensures Shell Spirax S2 ATF D2 stays
type fluid.
· Suitable for use in applications where Allison C-4 type fluids
'in grade' for a longer period.
· Dependable anti-wear protection
are required.
Long component life required for consistent gear and hydraulic
For a full listing of equipment approvals and recommendations,
pump applications.
please consult your local Shell Technical Helpdesk.
Main Applications
Typical Physical Characteristics
Properties
Kinematic Viscosity
@400C
mm2/s
Method
ISO 3104
Shell Spirax ATF D2
34.6
Kinematic Viscosity
@1000C
mm2/s
ISO 3104
7
ISO 2909
140
kg/m
ISO 12185
849
Flash Point (COC)
0
ISO 2592
189
Pour Point
0
ISO 3016
-45
Viscosity Index
Density
0
@15 C
3
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Health, Safety & Environment
· Health and Safety
Shell Spirax S2 ATF D2 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Page 1 of 2
Shell Spirax S2 ATF D2, v 1.1
11.07.2014.11.41
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Shell Spirax S2 ATF D2, v 1.1
11.07.2014.11.41
Technical Data Sheet
Previous Name: Shell ATF III
Shell Spirax S3 ATF MD3
High Performance Automatic Transmission Fluid in Many Applications
Shell Spirax S3 ATF MD3 is a premium quality automatic transmission fluid based on high viscosity index mineral oils
and carefully selected additives. It is blended to meet the stringent requirements of leading automotive transmission
manufacturers.
· Passenger car automatic transmissions
· Heavy duty automatic transmissions
· Power steering units
· Certain hydraulic applications calling for oils meeting ISO VG
Performance, Features & Benefits
· Friction modified
Provides consistent, reliable, smooth and trouble free
operation of automotive transmission systems.
· Exceptionally high oxidation resistance
32-46-68 viscosity requirements
Resistant to oil degradation and keeps automatic transmissions Specifications, Approvals & Recommendations
· Suitable for use in all vehicles where GM Dexron® III, Ford
clean.
· Excellent shear-stability
Mercon® or Allison C-4 fluids are required. Do not use where
A special 'VI' improver minimises the changes in viscosity with
GM Dexron® VI or Ford Mercon® V/Mercon® SP/Mercon®
operating temperature.
LV fluids are specified.
· Dexron ® is a trademark in many countries belonging to
· Dependable anti-wear and gear protection
General Motors Company. Mercon ® is a trademark in many
Long component life.
· Low temperature performance
countries belonging to Ford Motor Company.
For a full listing of equipment approvals and recommendations,
Excellent oil fluidity at low temperatures.
please consult your local Shell Technical Helpdesk.
Main Applications
Typical Physical Characteristics
Properties
Kinematic Viscosity
@400C
mm2/s
Method
ISO 3104
Shell Spirax S3 ATF MD3
33.8
Kinematic Viscosity
@1000C
mm2/s
ISO 3104
7.3
ISO 2909
175
kg/m
ISO 12185
864
Flash Point (COC)
0
ISO 2592
180
Pour Point
0
ISO 3016
-48
Viscosity Index
Density
0
@15 C
3
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Page 1 of 2
Shell Spirax S3 ATF MD3, v 1.1
11.07.2014.11.48
Health, Safety & Environment
· Health and Safety
Shell Spirax S3 ATF MD3 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Colour
Shell Spirax S3 ATF MD3 is dyed red for identification purposes.
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Shell Spirax S3 ATF MD3, v 1.1
11.07.2014.11.48
Technical Data Sheet
Shell Spirax S6 ATF A295
• Maintenance Saving
• Enhanced Efficiency
Synthetic Extended Drain Heavy Duty Automatic Transmission Fluid
Shell Spirax S6 ATF A295 Oil is a fully synthetic, heavy-duty automatic transmission fluid which is specifically
designed and approved for use in transmissions requiring Allison TES-295 fluids. Spirax S6 ATF A295 is
approved for extended service intervals and remains stable even under severe operating conditions.
·
Performance, Features & Benefits
·
Long enhanced protection – long equipment life
Spirax S6 ATF A295 was developed to meet the extended
Viscosity Control : Spirax S6 ATF A295 incorporates latest
drain requirements of late model medium and heavy duty
synthetic base fluid technology and mechanically stable
Allison automatic transmissions. It is particularly suitable for
viscosity index improver technology to help ensure the
transmissions requiring a TES-295 type product.
viscosity of the oil remains constant over the complete oil
Spirax S6 ATF A295 is recommended for use in
drain, thus helping to ensure consistent lubrication and oil
transmissions found in the following applications:
film thickness required to ensure protection of the gears,
·
bearings and other mechanical components.
Long fluid life – maintenance saving
The exceptional oxidation resistance of Spirax S6 ATF
A295 helps resist formation of deposits to ensure longer
fluid life and better fluid performance under arduous
conditions.
Extended fluid life demonstrated in full scale long duration
·
Allison Medium/Heavy Duty Automatic Transmissions
transmission testing.
·
·
·
·
·
·
·
·
Municipal fleets
Vans, school buses
Buses and Coaches
Emergency vehicles
Commercial vehicles and trucks
Motor-homes
Heavy duty pickup trucks
Spirax S6 ATF A295 can also be used in some ZF and Voith
heavy duty transmissions as well as those previously
Enhanced efficiency
serviceable by Dexron® III and Mercon® fluids, and is
Extremely high frictional stability, excellent viscometric
particularly suited to mixed fleet operations.
control and durability helps ensure consistent shifting and
power transfer characteristics. This helps provide smooth
shifting and helps maintain the fuel efficient operation of the
transmissions.
Excellent low temperature properties help ensure efficient
transmission operation even under cold climate conditions.
Specifications, Approvals & Recommendations
Approved:
·
·
·
·
·
·
·
·
Allison TES-295 AN-121008
Allison TES-468 AN-121008
Suitable for use in applications calling for:
Excellent anti-foam and filterability characteristics to help
ensure efficient and effective lubrication and hydraulic
control system performance within the transmission.
Main Applications
Page 1 of 2
Former Dexron-III applications
Voith DIWA transmissions
ZF TE-ML 14A, 14B, 14C
MAN 339 Z3
Mercedes-Benz Sheet 236.91
Caterpillar AT-1
Spirax S6 ATF A295, v 5.3
16.06.2016.09.24
For a full listing of equipment approvals and
recommendations, please consult your local Shell
Technical Help Desk.
Typical Physical Characteristics
Properties
cSt
Method
ASTM D445
Shell Spirax S6 ATF A295
36
cSt
ASTM D445
7.3
ASTM D2270
181
kg/l
ASTM D287
0.840
Flash Point (COC)
0
ASTM D92
213
Pour Point
0
ISO 3016
-51
Kinematic Viscosity
Kinematic Viscosity
0
@40 C
0
@100 C
Viscosity Index
Density
@150C
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Spirax S6 ATF A295 is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Spirax S6 ATF A295, v 5.3
16.06.2016.09.24
Technical Data Sheet
Formerly Known As: Shell Harvella T 15W-40
Shell Spirax S3 T
Premium Performance, SAE 15W-40, Universal Tractor Oil
Shell Spirax S3 T Oil is 'Super Tractor Oil Universal' (STOU) oil designed for use in a wide variety of modern
agricultural equipment. They are a blend of high viscosity index base oils and an advanced additive package
designed to give reliable performance in a wide range of farming applications.
·
Performance, Features & Benefits
·
·
Practical, convenient and multi-functional
Suitable for many types of tractor transmission/hydraulic
One oil for many lubricant applications around the farm.
systems:
transmissions, gears and bearings.
·
·
·
·
·
·
Jerk-free hydraulic operation
Specifications, Approvals & Recommendations
High performance
The high performance capabilities of Shell Spirax S3 T can
help maintain the life of all mechanical components
·
preventing metal fatigue and early wear of all working parts.
Excellent gear protection
Protects against scuffing, pitting and wear of all
·
·
·
·
·
·
·
Use of quality base oils to ensure consistent low
temperature viscosity characteristics ensures smooth
·
Universal performance
operation of hydraulic pumps and rams.
Excellent anti-corrosion properties
Excellent protection for all working parts.
Main Applications
Oil immersed brakes
Powershift Transmissions
Hydraulics
Power Steering Systems
Hydrostatic Transmissions
Conventional Gear Drive Systems
Massey Ferguson M 1139, M 1144
Caterpillar : CAT TO-2
John Deere : JDM J27
ZF : TE-ML 06B, 06Q, 07B
API Service Classification : GL-4
Can be used in applications requiring API CF-4 / SF
performance level
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Helpdesk.
Typical Physical Characteristics
Properties
Method
J 300
SAE Viscosity Grade
Shell Spirax S3 T
15W-40
ISO 3104
14.5
ISO 2909
135
kg/m3
ISO 12185
890
Flash Point (COC)
0
ISO 2592
226
Pour Point
0
ISO 3016
-27
Kinematic Viscosity
@1000C
mm2/s
Viscosity Index
Density
@150C
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Page 1 of 2
Spirax S3 T, v 2.1
11.03.2019.08.20
Health, Safety & Environment
·
Health and Safety
Shell Spirax S3 T is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Spirax S3 T, v 2.1
11.03.2019.08.20
Technical Data Sheet
Formerly Known As: Shell Donax TD
Shell Spirax S4 TXM
Premium SAE 10W-30 Multi-functional Tractor Transmission and Hydraulic Oil
Premium “universal tractor transmission oil” (UTTO) designed for use in transmissions, hydraulic systems, oil
immersed brakes and other ancillary systems fitted to agricultural tractors and off-road equipment. Spirax S4
TXM is recognised by leading agricultural equipment manufacturers and suitable for use in most modern
equipment.
·
Performance, Features & Benefits
·
·
Enhanced protection
Special friction modifying additives are included in Spirax S4
Excellent anti-oxidation, shear-stability, anti-wear, anti-
TXM to ensure optimum performance of oil immersed brakes
corrosion and anti-foam characteristics result from the use
whilst minimising brake noise. Spirax S4 TXM is
of the latest additive technology leading to greater reliability
recommended for most wet brake systems fitted to
and reduced down time thus minimising cost and
agricultural tractors and off-highway construction equipment.
·
maximising utilisation.
results in responsive hydraulic performance and smooth
gearshift performance, from cold starts to maximum
operating temperatures. Friction modifying additives help
create smooth, noise-free operation of oil immersed brakes.
OEM recognition
Shell Spirax S4 TXM has been tested and approved by a
wide range of equipment manufacturers.
Main Applications
·
Agricultural tractor transmissions
Shell Spirax S4 TXM has been evaluated against the latest
requirements of leading tractor and transmission
manufacturers including John Deere, Massey Ferguson,
·
CNH and ZF.
Hydraulic systems
of tractors and ancillary equipment. Spirax S4 TXM is
formulated using specially selected additives and high
quality base oils to provide good low temperature fluidity
Page 1 of 2
Specifications, Approvals & Recommendations
·
·
·
·
·
·
·
·
·
·
·
Suitable for use in applications where Allison C-4 type fluids
are required
Spirax S4 TXM can be used when a SAE J 306 85W grade
is recommended
Case New Holland MAT-3525, M2C-134 A-D, FNHA-2C.201.00
John Deere JDM-J20C
Massey-Ferguson M1143, M1145
Volvo WB 101, Transmission Oil 97303:015
ZF TE-ML 03E, 05F, 06D, 06K, 06M, 06N, 06R, 17E, 21F
Caterpillar TO-2
Komatsu - recommended for use in certain construction
equipment
Dana-Spicer mechanically controlled transmissions
Shell Spirax S4 TXM is also recommended for use in Case
equipment where fluids meeting MS 1207, 1209 or 1210 are
Shell Spirax S4 TXM is ideally suited for hydraulic systems
and wear protection.
Warning!
Not to be used as an Engine Oil.
Operator comfort
The excellent low temperature fluidity of Spirax S4 TXM
·
Oil immersed brakes
·
specified
API Gear Performance : API GL-4
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Helpdesk.
Spirax S4 TXM, v 4.4
11.03.2019.08.25
Typical Physical Characteristics
Properties
SAE Viscosity Grade
Method
SAE J 300
Shell Spirax S4 TXM
10W-30
Kinematic Viscosity
@400C
mm2/s
ISO 3104
60
Kinematic Viscosity
@1000C
mm2/s
ISO 3104
9.4
ISO 2909
138
kg/m3
ISO 12185
882
Flash Point (COC)
0
ISO 2592
220
Pour Point
0
ISO 3016
-42
Viscosity Index
Density
@150C
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Spirax S4 TXM is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Spirax S4 TXM, v 4.4
11.03.2019.08.25
Technical Data Sheet
Formerly Known As: Shell Donax TC 30
Shell Spirax S4 CX 30
High Performance Off-Highway Transmission and Hydraulic Oil for Many Applications
Shell Spirax S4 CX 30 is designed to provide operators with trouble free operation and maximum reliability for the
lifetime of the equipment. Spirax S4 CX meets the demanding requirements of modern transmission, final drive,
oil immersed brake and hydraulic systems fitted to heavy-duty off-highway.
Performance, Features & Benefits
·
Main Applications
Frictional performance and material compatibility
Highly consistent and reliable friction performance when
used with the advanced metallic and non-metallic materials
found in modern systems. Minimal clutch slippage, smooth
and quiet brake operation, and trouble-free transmission
·
Anti-wear protection
Dresser and in transmissions manufactured by Eaton, Eaton
The shear-stable SAE 30 viscosity grade is free from
Fuller, ZF, Dana, Rockwell amongst other:
requirements, providing superior protection during start-up
·
·
·
·
and low operating temperature conditions.
Specifications, Approvals & Recommendations
best protection of heavily loaded components.
Low temperature characteristics
Optimum mechanical performance and long oil life
Wide-ranging protection for critical components, such as
bronze friction discs in powershift transmissions and gears
·
·
duty off-highway equipment produced by the world’s leading
manufaturers including; Caterpillar, Komatsu, Komatsu-
Formulated to meet low temperature viscosity and fluidity
·
Shell Spirax S4 CX 30 is recommended for use in heavy
operation.
viscosity index (VI) improvers and thickeners and give the
·
·
in final drives and differential units.
Vickers 35V25 hydraulic pump test
Excellent performance in this demanding test.
·
·
·
·
Powershift Transmissions
Final drives
Oil immersed brakes
Hydraulic systems
Caterpillar Tractor TO-4
ZF TE-ML 03C, 07F
Suitable for use in applications where Allison C-4 type fluids
are required.
Shell Spirax S4 CX 30 oil is suitable for use in many
powershift or manual transmissions, wet brake systems, and
Oxidation stability
some hydraulic systems including Komatsu.
Contains inhibitors to control oxidation and deposit
formation. Protects both ferrous and non-ferrous metals
from corrosion. Suppresses foaming with improved flow
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
HelpdesK.
properties at low temperatures enhances efficiency.
Page 1 of 2
Spirax S4 CX 30, v 2.1
11.03.2019.08.22
Typical Physical Characteristics
Properties
SAE Viscosity Grade
Method
SAE J 300
Shell Spirax S4 CX 30
30
Kinematic Viscosity
@400C
mm2/s
ISO 3104
93.9
Kinematic Viscosity
@1000C
mm2/s
ISO 3104
10.9
Density
@150C
kg/m3
ISO 12185
899
Flash Point (COC)
0
ISO 2592
205
Pour Point
0
ISO 3016
-30
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Spirax S4 CX 30 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Spirax S4 CX 30, v 2.1
11.03.2019.08.22
Technical Data Sheet
Formerly Known As: Shell Donax TC 50
Shell Spirax S4 CX 50
High Performance Off-Highway Transmission and Final Drive Oil
Shell Spirax S4 CX 50 is designed to provide operators with trouble free operation and maximum reliability for the
lifetime of the equipment. Spirax S4 CX 50 meets the demanding requirements of modern transmission, final
drive, and oil immersed brakes fitted to heavy-duty off-highway equipment.
Performance, Features & Benefits
·
Main Applications
Frictional performance and material compatibility
Highly consistent and reliable friction performance when
used with the advanced metallic and non-metallic materials
·
found in modern systems. Minimal clutch slippage, smooth
and quiet brake operation, and trouble-free transmission
·
duty off-highway equipment produced by the world’s leading
operation.
manufaturers including; Caterpillar, Komatsu, Komatsu-
Anti-wear protection
Dresser and in transmissions manufactured by Eaton, Eaton
The shear-stable SAE 50 viscosity grade gives the best
Fuller, ZF, Dana, Rockwell amongst other:
Formulated to meet low temperature viscosity and fluidity
·
·
·
requirements, providing superior protection during start-up
Specifications, Approvals & Recommendations
protection of heavily loaded components particularly in
·
·
·
Shell Spirax S4 CX 50 is recommended for use in heavy
highly loaded final drive systems.
Low temperature characteristics
·
·
and low operating temperature conditions.
Optimum mechanical performance and long oil life
Powershift Transmissions
Final drives
Oil immersed brakes
Caterpillar Tractor : TO-4
Suitable for use in applications where Allison C-4 type fluids
Wide-ranging protection for critical components, such as
are required.
bronze friction discs in powershift transmissions and gears
For a full listing of equipment approvals and
in final drives and differential units.
recommendations, please consult your local Shell Technical
Oxidation Stability
Helpdesk.
Contains inhibitors to control oxidation and deposit
formation. Protects both ferrous and non-ferrous metals
from corrosion. Suppresses foaming.with improved flow
properties at low temperatures enhances efficiency.
Typical Physical Characteristics
Properties
Method
SAE J 300
Shell Spirax S4 CX 50
50
ISO 3104
217.4
ISO 3104
19
kg/m
ISO 12185
910
Flash Point (COC)
0
ISO 2592
205
Pour Point
0
ISO 3016
-18
SAE Viscosity Grade
Kinematic Viscosity
Kinematic Viscosity
Density
Page 1 of 2
@400C
0
@100 C
0
@15 C
mm2/s
2
mm /s
3
C
C
Spirax S4 CX 50, v 2.1
11.03.2019.08.23
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Spirax S4 CX 50 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Spirax S4 CX 50, v 2.1
11.03.2019.08.23
Technical Data Sheet
Previous Name: Shell Spirax G 90
Shell Spirax S2 G 90
High Quality API GL-4 Oil for Manual Transmissions and Gear Sets
Shell Spirax S2 G 90 is an automotive gear lubricant containing multi-functional additives required for mild extreme
pressure conditions.
· Rear axles
Performance, Features & Benefits
· Comprehensive components
Suitable for applications presenting conditions of medium
Specially selected additives impart good anti-wear, anti-rust
severity, such as some light duty commercial vehicles, passenger
characteristics and oxidation stability.
cars and motorcycles. Not suitable for heavy duty hypoid axles.
· Gear sets
Main Applications
Suitable for applications presenting conditions of medium
severity, such as lightly loaded gear sets of ancillary equipment
in commercial vehicles.
· Manual gearboxes
Specifications, Approvals & Recommendations
Shell Spirax S2 G 90 provides excellent lubrication of manual
· API Service Classification : GL-4
gearboxes of motorcycles, passenger cars and commercial
For a full listing of equipment approvals and recommendations,
vehicles (on and off road) operating under high speed/low
please consult your local Shell Technical Helpdesk.
torque and low speed/high torque conditions. Suitable for
gearboxes fitted with synchromesh.
Typical Physical Characteristics
Properties
SAE Viscosity Grade
Method
SAE J 306
Shell Spirax S2 G 90
90
Kinematic Viscosity
@400C
mm2/s
ISO 3104
145
Kinematic Viscosity
@1000C
mm2/s
ISO 3104
14.3
ISO 2909
96
kg/m3
ISO 12185
904
Flash Point (COC)
0
ISO 2592
191
Pour Point
0
ISO 3016
-18
Viscosity Index
Density
@150C
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Health, Safety & Environment
· Health and Safety
Shell Spirax S2 G 90 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
Page 1 of 2
Shell Spirax S2 G 90, v 1.1
11.07.2014.11.43
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Shell Spirax S2 G 90, v 1.1
11.07.2014.11.43
Technical Data Sheet
Previous Name: Shell Spirax G 80W-90
Shell Spirax S2 G 80W-90
High Quality API GL-4 Oil for Manual Transmissions and Gear Sets
Shell Spirax S2 G 80W-90 is an automotive gear lubricant containing multi-functional additives required for mild
extreme pressure conditions.
· Rear axles
Performance, Features & Benefits
· Comprehensive components
Suitable for applications presenting conditions of medium
Specially selected additives impart good anti-wear, anti-rust
severity, such as some light duty commercial vehicles, passenger
characteristics and oxidation stability.
cars and motorcycles. Not suitable for heavy duty hypoid axles.
Specifications, Approvals & Recommendations
Main Applications
· API Service Classification : GL-4
For a full listing of equipment approvals and recommendations,
please consult your local Shell Technical Helpdesk.
· Manual gearboxes
Shell Spirax S2 G 80W-90 provides excellent lubrication of
manual gearboxes of motorcycles, passenger cars and
commercial vehicles (on and off road) operating under high
speed/low torque and low speed/high torque conditions.
Suitable for gearboxes fitted with synchromesh.
Typical Physical Characteristics
Properties
SAE Viscosity Grade
Method
SAE J 306
Shell Spirax S2 G 80W-90
80W-90
Kinematic Viscosity
@400C
mm2/s
ISO 3104
146
Kinematic Viscosity
@1000C
mm2/s
ISO 3104
14.7
ISO 2909
100
kg/m3
ISO 12185
900
Flash Point (COC)
0
ISO 2592
175
Pour Point
0
ISO 3016
-27
Viscosity Index
Density
@150C
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Health, Safety & Environment
· Health and Safety
Shell Spirax S2 G 80W-90 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
Page 1 of 2
Shell Spirax S2 G 80W-90, v 1.1
11.07.2014.11.42
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Shell Spirax S2 G 80W-90, v 1.1
11.07.2014.11.42
Technical Data Sheet
Previous Name: Shell Spirax G 140
Shell Spirax S2 G 140
High Quality API GL-4 Oil for Manual Transmissions and Gear Sets
Spirax S2 G 140 is an automotive gear lubricant containing multi-functional additives required for mild extreme
pressure conditions
· Rear axles
Performance, Features & Benefits
· Comprehensive components
Suitable for applications presenting conditions of medium
Specially selected additives impart good anti-wear, anti-rust
severity, such as some light duty commercial vehicles, passenger
characteristics and oxidation stability.
cars and motorcycles. Not suitable for heavy duty hypoid axles.
Specifications, Approvals & Recommendations
Main Applications
· API Service Classification GL-4
For a full listing of equipment approvals and recommendations,
please consult your local Shell Technical Helpdesk.
· Manual gearboxes
Spirax S2 G 140 provides excellent lubrication of manual
gearboxes of motorcycles, passenger cars and commercial
vehicles (on and off road) operating under high speed/low
torque and low speed/high torque conditions. Suitable for
gearboxes fitted with synchromesh.
Typical Physical Characteristics
Properties
SAE Viscosity Grade
Method
SAE J 306
Shell Spirax S2 G 140
140
Kinematic Viscosity
@400C
mm2/s
ISO 3104
340
Kinematic Viscosity
@1000C
mm2/s
ISO 3104
25.1
ISO 2909
96
kg/m3
ISO 12185
918
Flash Point (COC)
0
ISO 2592
199
Pour Point
0
ISO 3016
-9
Viscosity Index
Density
@150C
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Health, Safety & Environment
· Health and Safety
Shell Spirax S2 G 140 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
Page 1 of 2
Shell Spirax S2 G 140, v 1.1
11.07.2014.11.41
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Shell Spirax S2 G 140, v 1.1
11.07.2014.11.41
Technical Data Sheet
Formerly Known As: Shell Spirax GX 80W-90
Shell Spirax S3 G 80W-90
High Performance Manual Transmission and Gear Oil for MAN, ZF and other OEMs
Shell Spirax S3 G 80W-90 are long life gearbox oils designed to give new benefits based on improved levels of
performance to meet the future requirements of gearboxes. Specially optimised mineral base oils and new
additive technology improve lubrication of the drive train and potentially extend oil drain intervals.
Performance, Features & Benefits
·
Main Applications
Longer oil drain capability
Higher reserves of additives ensure long-term protection of
the gears. Longer oil life as a result of higher oxidation
·
·
stability also improves oil drain intervals.
Synchromesh gearboxes and medium loaded axle drives.
Longer gear life
Clear improvement in protection against wear prevents
Specifications, Approvals & Recommendations
·
·
·
·
·
premature failure. High oxidation resistance also prevents
·
damaging deposit formation in the gears.
Greater efficiency
Ideal shear-stable formulations give improved flow
properties and shiftability at low temperatures. Optimised
friction properties minimise power losses and wear, thereby
·
Automotive transmissions
also improving efficiency.
MAN : 341 Type Z2, 341 Type E2
ZF TE-ML : 02B-016A-17A-19A
Eaton (ex US) : meets
Isuzu : meets
API Service Classification : GL-4
For a full listing of equipment approvals and
Less environmental pollution
recommendations, please consult your local Shell Technical
Reduced environmental damage and improved recyclability
Helpdesk.
result from the significantly lower chlorine content.
Markedly improved seal compatibility for increased
protection against leaks.
Typical Physical Characteristics
Properties
SAE Viscosity Grade
Method
SAE J 306
Shell Spirax S3 G 80W-90
80W-90
Kinematic Viscosity
@400C
mm2/s
ISO 3104
160.5
Kinematic Viscosity
@1000C
mm2/s
ISO 3104
16.1
ISO 2909
105
kg/m3
ISO 12185
895
Flash Point (COC)
0
ISO 2592
215
Pour Point
0
ISO 3016
-30
Viscosity Index
Density
@150C
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Page 1 of 2
Spirax S3 G 80W-90, v 2.1
11.03.2019.08.19
Health, Safety & Environment
·
Health and Safety
Shell Spirax S3 G 80W-90 is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Spirax S3 G 80W-90, v 2.1
11.03.2019.08.19
Technical Data Sheet
Previous Name: Shell Spirax A 90
Shell Spirax S2 A 90
High quality, GL-5axle oil
Shell Spirax S2 A 90 is blended for use in a wide variety of automotive axle units subjected to heavy duty conditions.
Performance, Features & Benefits
· Comprehensive components
Specially selected additives impart good anti-wear, anti-rust
· Hypoid gear axles.
· Motorcycle gear units separate from the engine.
· Other automotive transmission units operating under high
speed/shock load, high speed/low torque and low speed/high
characteristics and oxidation stability.
torque conditions.
· High quality base oils
Maintains low temperature flow in the designed temperature
Specifications, Approvals & Recommendations
range, resists oxidation, and maintains oil film between gears.
· API Service Classification GL-5
· For a full listing of equipment approvals and recommendations,
Main Applications
please consult your local Shell Technical Helpdesk.
· Automotive transmissions, differentials.
· Moderate to heavily loaded gear sets in stationary and
ancillary equipment.
Typical Physical Characteristics
Properties
SAE Viscosity Grade
Method
SAE J 306
Shell Spirax S2 A 90
90
Kinematic Viscosity
@40°C
mm²/s
ISO 3104
145
Kinematic Viscosity
@100°C
mm²/s
ISO 3104
14.3
ISO 2909
96
kg/m³
ISO 12185
909
Flash Point (COC)
°C
ISO 2592
180
Pour Point
°C
ISO 3016
-18
Viscosity Index
Density
@15°C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Health, Safety & Environment
· Health and Safety
Shell Spirax S2 A 90 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Page 1 of 2
Shell Spirax S2 A 90, v 2
23.08.2013.14.44
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Shell Spirax S2 A 90, v 2
23.08.2013.14.44
Technical Data Sheet
Previous Name: Shell Spirax A 80W-90
Shell Spirax S2 A 80W-90
High quality, GL-5 axle oil
Spirax S2 A 80W-90 is blended for use in a wide variety of automotive axle units subjected to heavy duty conditions.
Performance, Features & Benefits
· Comprehensive components
Specially selected additives impart good anti-wear, anti-rust
characteristics and oxidation stability.
· High quality base oils
Maintains low temperature flow in the designed temperature
range, resists oxidation, and maintains oil film between gears.
· Automotive transmissions, differentials
· Moderate to heavily loaded gear sets in stationary and ancillary
equipment
· Hypoid gear axles
· Motorcycle gear units separate from the engine
· Other automotive transmission units operating under high
speed/shock load, high speed/low torque and low speed/high
torque conditions.
Main Applications
Specifications, Approvals & Recommendations
· API Service Classification GL-5
For a full listing of equipment approvals and recommendations,
please consult your local Shell Technical Helpdesk.
Typical Physical Characteristics
Properties
Method
SAE J 306
Shell Spirax S2 A 80W-90
80W-90
ISO 3104
146
ISO 3104
14.7
ISO 2909
100
kg/m
ISO 12185
904
Flash Point (COC)
0
ISO 2592
175
Pour Point
0
ISO 3016
-27
SAE Viscosity Grade
Kinematic Viscosity
@400C
Kinematic Viscosity
0
mm /s
@15 C
3
@100 C
mm2/s
2
Viscosity Index
Density
0
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Health, Safety & Environment
· Health and Safety
Shell Spirax S2 A 80W-90 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Page 1 of 2
Shell Spirax S2 A 80W-90, v 1.1
11.07.2014.11.33
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Shell Spirax S2 A 80W-90, v 1.1
11.07.2014.11.33
Technical Data Sheet
Previous Name: Shell Spirax A 140
Shell Spirax S2 A 140
High quality, GL-5 axle oil
Shell Spirax S2 A 140 is blended for use in a wide variety of automotive axle units subjected to heavy duty conditions.
Performance, Features & Benefits
· Comprehensive components
Specially selected additives impart good anti-wear, anti-rust
characteristics and oxidation stability.
· High quality base oils
Maintains low temperature flow in the designed temperature
range, resists oxidation, and maintains oil film between gears.
· Automotive transmissions, differentials.
· Moderate to heavily loaded gear sets in stationary and ancillary
equipment.
· Hypoid gear axles.
· Motorcycle gear units separate from the engine.
· Other automotive transmission units operating under high
speed/shock load, high speed/low torque and low speed/high
torque conditions.
Main Applications
Specifications, Approvals & Recommendations
· API Service Classification GL-5
For a full listing of equipment approvals and recommendations,
please consult your local Shell Technical Helpdesk.
Typical Physical Characteristics
Properties
Method
SAE J 306
Shell Spirax S2 A 140
140
ISO 3104
340
ISO 3104
25.1
ISO 2909
96
kg/m
ISO 12185
918
Flash Point (COC)
0
ISO 2592
199
Pour Point
0
ISO 3016
-9
SAE Viscosity Grade
Kinematic Viscosity
@400C
Kinematic Viscosity
0
mm /s
@15 C
3
@100 C
mm2/s
2
Viscosity Index
Density
0
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Health, Safety & Environment
· Health and Safety
Shell Spirax S2 A 140 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Page 1 of 2
Shell Spirax S2 A 140, v 1.1
11.07.2014.11.32
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Shell Spirax S2 A 140, v 1.1
11.07.2014.11.32
Technical Data Sheet
Shell Spirax S3 AX 85W-140
High Performance, GL-5 Axle Oil for General Applications
Shell Spirax S3 AX 85W-140 is a high performance, API GL-5 gear and axle oil for moderate to heavily loaded on
and off-road driveline applications requiring SAE 85W-140 oil.
·
Performance, Features & Benefits
·
Multiple vehicle applications
Automotive gearboxes, differentials and hypoid gear sets in
High performance fluid for API GL-5 applications that may
motorcycle, passenger car, commercial vehicles, off-road
require SAE 85W-140, 140, or 80W-140 fluids. May be
construction and agricultural equipment.
used in some SAE 75W-140 applications where low
·
·
General gear sets
temperature performance is not needed.
Ancillary equipment gear sets and some industrial
Longer oil drain capability
equipment.
Long life additives ensure long-term protection of the gears
and high oxidation resistance so providing extended drain
·
Automotive differentials
capability.
Longer transmission life
Outstanding pitting, scoring and wear protection.
Main Applications
Specifications, Approvals & Recommendations
·
·
·
·
MAN: 342 Type M1
ZF TE-ML: 07A, 16D, 21A
API Service Classification : GL-5
US Military : MIL-L-2105D
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Helpdesk.
Typical Physical Characteristics
Properties
Method
SAE J 306
Shell Spirax S3 AX
85W-140
ISO 3104
435
ISO 3104
29.6
kg/m
ISO 12185
910
Flash Point (COC)
0
ISO 2592
225
Pour Point
0
ISO 3016
-15
SAE Viscosity Grade
@400C
Kinematic Viscosity
0
Kinematic Viscosity
@100 C
0
Density
@15 C
mm2/s
2
mm /s
3
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Spirax S3 AX 85W-140 is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
Page 1 of 2
Shell Spirax S3 AX 85W-140, v 2.2
17.03.2015.09.12
·
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Shell Spirax S3 AX 85W-140, v 2.2
17.03.2015.09.12
Table of Content
No. Product Name
1.
Corena S2 P 100
2.
Corena S2 RJ 32
3.
Corena S3 R 32
4.
Corena S3 R 46
5.
Corena S3 R 68
6.
Corena S4 R 46
7.
Corena S4 R 68
Technical Data Sheet
Formerly Known As: Shell Corena P
• Reliable Protection
• Standard Life Applications
Shell Corena S2 P 100
Reciprocating (Piston) Air Compressor Oil
Shell Corena S2 P is high quality air compressor oil designed to deliver the lubrication performance for high
pressure reciprocating compressors. It is suitable for most reciprocating air compressors running at up to 2200C
discharge temperatures at elevated pressures.
Performance, Features & Benefits
·
Main Applications
Long oil life – Maintenance saving
Shell Corena S2 P allows the interval between valve and
piston maintenance to be extended under certain
applications. Compressors can be kept in service for much
Reciprocating air compressors
longer periods, operating at a consistently high level of
Shell Corena S2 P is suitable for use in industrial
efficiency.
reciprocating air compressors operating with air discharge
Extended maintenance capability is supported by
temperatures of up to 2200C.
resistance to formation of carbon deposits and lacquer on
valves and piston crowns at high working temperatures and
·
·
·
Breathing air compressors
Shell Corena S2 P may be used in breathing air
pressures.
compressors, provided subsidiary clean-up apparatus is
Outstanding wear protection
used to ensure that the air produced is fit for breathing.
Shell Corena S2 P helps provide effective protection of
internal metal surfaces from corrosion and wear to help
prolong the life of critical parts such as bearings and
·
pistons.
Maintaining system efficiency
Specifications, Approvals & Recommendations
·
·
DIN 51506 VBL
ISO 6743-3A-L DAA Normal Duty
For a full listing of equipment approvals and
Shell Corena S2 P helps prevent the formation of carbon
recommendations, please consult your local Shell Technical
deposits and lacquer on valves and piston crowns at high
Helpdesk.
working temperatures and pressures. These can cause
serious damage, lower compressor efficiency and increase Compatibility & Miscibility
maintenance costs. In addition, Shell Corena S2 P has
good water separation to help prevent accelerated
·
corrosion, facilitating easy condensate draining.
·
Seal Compatibility
Shell Corena S2 P oils are compatible with all sealing
materials commonly used in air compressors.
Enhanced air line safety
In discharge air-lines, the combination of rust particles,
dispersed in carbonaceous deposits, coupled with heat
from recently compressed air, can cause a reaction leading
to the possibility of fires and explosion. Shell Corena S2 P
helps to minimise the likelihood of this danger.
Page 1 of 3
Corena S2 P 100, v 2.2
07.09.2018.07.13
Typical Physical Characteristics
Properties
Method
ISO 3448
ISO Viscosity Grade
Shell Corena S2 P 100
100
Kinematic Viscosity
@400C
mm2/s
ASTM D445
100
Kinematic Viscosity
@1000C
mm2/s
ASTM D445
9.2
Density
@150C
kg/m3
ASTM D1298
899
Flash Point (COC)
0
ASTM D92
240
Pour Point
0
C
ASTM D97
-33
Neutralisation Value
mg KOH/g
ASTM D974
0.3
Sulphated Ash
%m
DIN 51575
0.06
Rust Prevention - Synthetic Sea Water
degree
ASTM D665B
Pass
C
Water Separability
@540C
min
ASTM D1401
-
Water Sperability
@820C
min
ASTM D1401
20
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Corena S2 P is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Corena S2 P 100, v 2.2
07.09.2018.07.13
Page 3 of 3
Corena S2 P 100, v 2.2
07.09.2018.07.13
Technical Data Sheet
Previous Name: Shell Corena RS
• STANDARD LIFE APPLICATIONS
• JAPANESE COMPRESSOR
APPLICATIONS
Shell Corena S2 RJ
Rotary Air Compressor Oil
Shell Corena S2 RJ is a high quality air compressor oil designed to deliver reliable lubrication of rotary screw air
compressors. It uses an optimised non-detergent additive system to provide good protection and performance,
particularly in Japanese compressor machinery where low sludge, good thermal-oxidation stability and high flash point
are required.
Performance, Features & Benefits
Main Applications
· Long oil life - Maintenance saving
Shell Corena S2 RJ is formulated to help:
· Resist sludge formation, to ensure efficient operation even in
humid environments
· Screw air compressors
· Resist formation of deposits on rotating components in screw Suitable for oil flooded or oil injected air compressors,
compressors
particularly those from Japanese manufacturers.
Exact oil maintenance interval will depend on intake air
Shell Corena S2 RJ should not be used in reciprocating
quality, duty cycle and ambient conditions (consult OEM
compressors, rotary vane, drip-feed rotary compressors or
recommendations).
compressors used for breathing air.
· Maintaining System Efficiency
Specifications, Approvals & Recommendations
Air release and prevention of foaming are critical
performance characteristics in a compressor oil, ensuring
reliable start-up and continous compressed air availability.
For a full listing of equipment approvals and recommendations,
please consult your local Shell Technical Help Desk.
Shell Corena S2 RJ is designed to provide rapid air release
Compatibility & Miscibility
without excessive foaming to give trouble-free operation even
· Seal Compatability
under cycling conditions.
Shell Corena S2 RJ oils are compatible with seal materials
Shell Corena S2 RJ has low volatility and oil carryover
commonly specified for use in air compressors.
properties to reduce oil top-up.
In addition, Shell Corena S2 RJ has excellent water separation
properties to help ensure continuous efficient operation of the
compressor even in the presence of water.
Page 1 of 3
Shell Corena S2 RJ , v 1.0
07.05.2014.13.47
Typical Physical Characteristics
Properties
Density
0
@15 C
3
kg/m
Method
ASTM D1298
Shell Corena S2 RJ
851
Flash Point (COC)
0
ASTM D92
220
Pour Point
0
C
ASTM D97
-30
C
Kinematic Viscosity
@400C
mm2/s
ASTM D445
32
Kinematic Viscosity
@1000C
mm2/s
ASTM D445
6.07
ISO 2909
140
Viscosity Index
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Health, Safety & Environment
· Health and Safety
Shell Corena S2 RJ is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
www.epc.shell.com
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
To find the right Shell Corena product for your vehicles and equipment, please consult Shell LubeMatch at
http://lubematch.shell.com
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Shell Corena S2 RJ , v 1.0
07.05.2014.13.47
Page 3 of 3
Shell Corena S2 RJ , v 1.0
07.05.2014.13.47
Technical Data Sheet
• Long life
• Improved Efficiency
Shell Corena S3 R 32
Premium Rotary Air Compressor Oil
Shell Corena S3 R is a premium quality air compressor oil designed to deliver high performance lubrication of
rotary sliding vane and screw air compressors. It uses an advanced additive system to provide excellent
protection and performance for compressors running with oil maintenance intervals up to 4,000 hours (where
allowed by manufacturers).
·
Performance, Features & Benefits
·
·
·
·
Maintaining system efficiency
Long oil life – Maintenance saving
Air release and prevention of foaming are critical
Shell Corena S3 R is capable of providing oil maintenance
performance characteristics in a compressor oil, ensuring
intervals of 4,000 hours (where allowed by manufacturers)
reliable start-up and continuous compressed air availability.
even when operating at maximum discharge temperatures
Shell Corena S3 R is designed to provide rapid air release
of up to 1000C.
without excessive foaming to give trouble-free operation
even under cycling conditions.
It is formulated to help:
In addition, Shell Corena S3 R has excellent water
Resist formation of carbon deposits in sliding vane slots in
separation properties to help ensure continuous efficient
vane compressors
operation of the compressor even in the presence of water.
Resist formation of deposits on rotating components in
Main Applications
screw compressors.
Resist thermal breakdown and deposit formation to
maintain excellent internal surface cleanliness particularly
·
·
in oil/air separator and coalescer systems.
The exact oil maintenance interval will depend on intake air
·
Rotary sliding vane and screw air compressors
quality, duty cycle and ambient conditions. For hot and
Shell Corena S3 R is suitable for use in oil-flooded/ oil
humid type climates as found in the Asian and Pacific
injected single or two-stage rotary vane or screw air
regions, oil drain period below 4,000hrs is recommended
compressors.
(also consult OEM recommendations).
Specifications, Approvals & Recommendations
Outstanding wear protection
With many years of successful application, Shell Corena S3
·
ISO 6743-3:2003(E) L-DAH
For a full listing of equipment approvals and
R helps provide effective protection of internal metal
recommendations, please consult your local Shell Technical
surfaces from corrosion and wear.
Helpdesk.
It contains an advanced ashless anti-wear system to help
prolong the life of critical parts such as bearings and gears.
Compatibility & Miscibility
·
Seal Compatibility
Shell Corena S3 R oils are compatible with seal materials
specified for use with mineral oils.
Page 1 of 3
Corena S3 R 32, v 1.5
13.11.2018.08.59
Typical Physical Characteristics
Properties
Method
ISO 3448
ISO Viscosity Grade
Shell Corena S3 R 32
32
Kinematic Viscosity
@400C
mm2/s
ASTM D445
32
Kinematic Viscosity
@1000C
mm2/s
ASTM D445
5.4
ISO 2909
102
kg/m3
ASTM D1298
864
Flash Point (COC)
0
C
ASTM D92
218
Air Release
minutes
ASTM D3427
2
RPVOT
minutes
ASTM D2272
700
FZG Test
LS Fail
CEC-L-07-A-95
11
Pour Point
0
C
ASTM D97
-30
minutes
ASTM D1401
15
Viscosity Index
Density
Water Separability
@150C
@540C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Corena S3 R is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Corena S3 R 32, v 1.5
13.11.2018.08.59
Technical Data Sheet
• Long Life
• Improved Efficiency
Shell Corena S3 R 46
Premium Rotary Air Compressor Oil
Shell Corena S3 R is a premium quality air compressor oil designed to deliver high performance lubrication of
rotary sliding vane and screw air compressors. It uses an advanced additive system to provide excellent
protection and performance for compressors running with oil maintenance intervals up to 4,000 hours (where
allowed by manufacturers).
·
Performance, Features & Benefits
·
·
·
·
Maintaining system efficiency
Long oil life – Maintenance saving
Air release and prevention of foaming are critical
Shell Corena S3 R is capable of providing oil maintenance
performance characteristics in a compressor oil, ensuring
intervals of 4,000 hours (where allowed by manufacturers)
reliable start-up and continuous compressed air availability.
even when operating at maximum discharge temperatures
Shell Corena S3 R is designed to provide rapid air release
of up to 1000C.
without excessive foaming to give trouble-free operation
even under cycling conditions.
It is formulated to help:
In addition, Shell Corena S3 R has excellent water
Resist formation of carbon deposits in sliding vane slots in
separation properties to help ensure continuous efficient
vane compressors.
operation of the compressor even in the presence of water.
Resist formation of deposits on rotating components in
Main Applications
screw compressors.
Resist thermal breakdown and deposit formation to
maintain excellent internal surface cleanliness particularly
·
·
in oil/air separator and coalescer systems.
The exact oil maintenance interval will depend on intake air
·
Rotary sliding vane and screw air compressors
quality, duty cycle and ambient conditions. For hot and
Shell Corena S3 R is suitable for use in oil-flooded/ oil
humid type climates as found in the Asian and Pacific
injected single or two-stage rotary vane or screw air
regions, oil drain period below 4,000hrs is recommended
compressors.
(also consult OEM recommendations).
Specifications, Approvals & Recommendations
Outstanding wear protection
With many years of successful application, Shell Corena S3
·
ISO 6743-3:2003(E) L-DAH
For a full listing of equipment approvals and
R helps provide effective protection of internal metal
recommendations, please consult your local Shell Technical
surfaces from corrosion and wear.
Helpdesk.
It contains an advanced ashless anti-wear system to help
prolong the life of critical parts such as bearings and gears.
Compatibility & Miscibility
·
Seal Compatibility
Shell Corena S3 R oils are compatible with seal materials
specified for use with mineral oils.
Page 1 of 3
Corena S3 R 46, v 1.5
13.11.2018.09.06
Typical Physical Characteristics
Properties
Method
ISO 3448
ISO Viscosity Grade
Shell Corena S3 R 46
46
Kinematic Viscosity
@400C
mm2/s
ASTM D445
46
Kinematic Viscosity
@1000C
mm2/s
ASTM D445
6.9
ISO 2909
105
kg/m3
ASTM D1298
868
Flash Point (COC)
0
C
ASTM D92
230
Air Release
minutes
ASTM D3427
3
RPVOT
minutes
ASTM D2272
700
FZG Test
LS Fail
CEC-L-07-A-95
11
Pour Point
0
C
ASTM D97
-30
minutes
ASTM D1401
15
Viscosity Index
Density
Water Separability
@150C
@540C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Corena S3 R is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Corena S3 R 46, v 1.5
13.11.2018.09.06
Technical Data Sheet
• Long Life
• Improved Efficiency
Shell Corena S3 R 68
Premium Rotary Air Compressor Oil
Shell Corena S3 R is a premium quality air compressor oil designed to deliver high performance lubrication of
rotary sliding vane and screw air compressors. It uses an advanced additive system to provide excellent
protection and performance for compressors running with oil maintenance intervals up to 4,000 hours (where
allowed by manufacturers).
·
Performance, Features & Benefits
·
Long oil life – Maintenance saving
Air release and prevention of foaming are critical
Shell Corena S3 R is capable of providing oil maintenance
performance characteristics in a compressor oil, ensuring
intervals of 4,000 hours (where allowed by manufacturers)
reliable start-up and continuous compressed air availability.
even when operating at maximum discharge temperatures
Shell Corena S3 R 68 is designed to provide rapid air
0
·
·
·
Maintaining system efficiency
of up to 100 C.
release without excessive foaming to give trouble-free
It is formulated to help:
operation even under cycling conditions.
Resist formation of carbon deposits in sliding vane slots in
In addition, Shell Corena S3 R 68 has excellent water
vane compressors.
separation properties to help ensure continuous efficient
operation of the compressor even in the presence of water.
Resist formation of deposits on rotating components in
screw compressors.
Main Applications
Resist thermal breakdown and deposit formation to
maintain excellent internal surface cleanliness particularly
·
in oil/air separator and coalescer systems.
The exact oil maintenance interval will depend on intake air
quality, duty cycle and ambient conditions. For hot and
·
·
Rotary sliding vane and screw air compressors
Shell Corena S3 R is suitable for use in oil-flooded/ oil
humid type climates as found in the Asian and Pacific
injected single or two-stage rotary vane or screw air
regions, oil drain period below 4,000hrs is recommended
compressors.
(also consult OEM recommendations).
Specifications, Approvals & Recommendations
Outstanding wear protection
With many years of successful application, Shell Corena S3
·
ISO 6743-3:2003(E) L-DAH
For a full listing of equipment approvals and
R 68 helps provide effective protection of internal metal
recommendations, please consult your local Shell Technical
surfaces from corrosion and wear.
Helpdesk.
It contains an advanced ashless anti-wear system to help
prolong the life of critical parts such as bearings and gears. Compatibility & Miscibility
·
Seal Compatibility
Shell Corena S3 R oils are compatible with seal materials
specified for use with mineral oils.
Page 1 of 3
Corena S3 R 68, v 1.6
13.11.2018.09.12
Typical Physical Characteristics
Properties
Method
ISO 3448
ISO Viscosity Grade
Shell Corena S3 R 68
68
Kinematic Viscosity
@400C
mm2/s
ASTM D445
68
Kinematic Viscosity
@1000C
mm2/s
ASTM D445
8.9
ISO 2909
104
kg/m3
ASTM D1298
873
Flash Point (COC)
0
C
ASTM D92
248
Air Release
minutes
ASTM D3427
5
RPVOT
minutes
ASTM D2272
700
FZG Test
LS Fail
CEC-L-07-A-95
11
Pour Point
0
C
ASTM D97
-30
minutes
ASTM D1401
15
Viscosity Index
Density
Water separability
@150C
@540C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Corena S3 R is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Corena S3 R 68, v 1.6
13.11.2018.09.12
Page 3 of 3
Corena S3 R 68, v 1.6
13.11.2018.09.12
Technical Data Sheet
• Extra Long Life
• Improved Efficiency
• Severe Applications
Shell Corena S4 R 46
Advanced Synthetic Rotary Air Compressor Oil
Shell Corena S4 R is primarily an advanced synthetic air compressor oil designed to deliver the highest
performance lubrication of rotary sliding vane and screw air compressors. It uses a unique advanced additive
system to provide excellent protection and performance for compressors running with oil maintenance intervals of
10,000 hours and up to 12,000 hours under certain conditions. Shell Corena S4 R is also perfectly suitable to
cover applications where a synthetic bearing & circulating oil or R&O oil (ISO VG 32-68) is required.
·
Performance, Features & Benefits
·
Long oil life – Maintenance saving
Shell Corena S4 R is designed to provide rapid air release
Shell Corena S4 R is capable of providing oil maintenance
without excessive foaming to give trouble-free operation
intervals of 10,000 hours (where allowed by manufacturers)
even under cycling conditions helping to ensure reliable
even when operating at maximum discharge temperatures
start-up and continuous compressed air availability.
0
·
·
·
Maintaining system efficiency
in excess of 100 C. This may be extended up to 12,000
Shell Corena S4 R also has low volatility which can result in
hours under certain conditions.
lower evaporation and oil carryover in the compressor,
The advanced formulation of Shell Corena S4 R helps
providing reduced oil top-up requirements in combination
deliver exceptional oil life through:
with increased air quality.
Exceptional resistance to thermal and chemical breakdown.
In addition, Shell Corena S4 R has excellent water
Resist formation of deposits on rotating components in
separation properties to help ensure continuous efficient
screw compressors and in sliding vane slots for continuous
operation of the compressor even in the presence of water.
efficient operation.
Main Applications
Exceptionally low levels of deposit formation to help
maintain excellent internal surface cleanliness particularly
in oil/air separator and coalescer systems.
The exact oil maintenance interval will depend on intake air
quality, duty cycle and ambient conditions. For hot and
·
·
Rotary sliding vane and screw air compressors
Shell Corena S4 R is suitable for use in oil-flooded/ oil
humid type climates as found in the Asian and Pacific
injected single or two-stage rotary vane or screw air
regions, the lower oil drain period of 10,000hrs is
compressors.
recommended (also consult OEM recommendations).
Outstanding wear protection
·
Severe service conditions
May be used where exceptionally high ambient temperatures
Shell Corena S4 R helps provide exceptional protection of
internal metal surfaces from corrosion and wear.
It contains an advanced ashless anti-wear system to help
prolong the life of critical parts such as bearings and gears.
·
or humidity are found.
Bearing & Circulating oil
Perfectly suitable to cover applications where a synthetic
bearing & circulating oil or R&O oil (ISO VG 32-68) is
required, and will provide benefits due to increased
resistance to deposits formation, improved low temperature
fluidity and lowering of equipment operating temperatures.
Page 1 of 3
Corena S4 R 46, v 2.5
07.09.2018.08.49
Specifications, Approvals & Recommendations
·
Compatibility & Miscibility
·
ISO 6743-3:2003(E) L-DAJ
Miscibility
For a full listing of equipment approvals and
Shell Corena S4 R is fully miscible with mineral oils,
recommendations, please consult your local Shell
although dilution with mineral lubricants will markedly reduce
Technical Helpdesk.
its performance. Care must be taken to avoid mixing Shell
Corena S4 R with certain other types of synthetic fluids.
·
Contact your Shell representative for further information.
Seal Compatibility
Shell Corena S4 R oils are compatible with seal materials
specified for use with mineral oils.
Typical Physical Characteristics
Properties
Method
ISO 3448
ISO Viscosity Grade
Shell Corena S4 R 46
46
ASTM D445
46
ASTM D445
7.5
ISO 2909
135
kg/m
ASTM D1298
843
Flash Point (COC)
0
C
ASTM D92
230
Air Release
minutes
ASTM D3427
2
RPVOT
minutes minimum
ASTM D2272
2100
FZG Test
LS Fail
CEC-L-07-A-95
12
Pour Point
0
C
ASTM D97
-48
minutes
ASTM D1401
10
Kinematic Viscosity
Kinematic Viscosity
@400C
0
mm2/s
@100 C
2
mm /s
Viscosity Index
Density
Water Separability
0
@15 C
0
@54 C
3
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Corena S4 R is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Corena S4 R 46, v 2.5
07.09.2018.08.49
Technical Data Sheet
• Extra Long Life
• Improved Efficiency
• Severe Applications
Shell Corena S4 R 68
Advanced Synthetic Rotary Air Compressor Oil
Shell Corena S4 R is primarily an advanced synthetic air compressor oil designed to deliver the highest
performance lubrication of rotary sliding vane and screw air compressors. It uses a unique advanced additive
system to provide excellent protection and performance for compressors running with oil maintenance intervals of
10,000 hours and up to 12,000 hours under certain conditions. Shell Corena S4 R is also perfectly suitable to
cover applications where a synthetic bearing & circulating oil or R&O oil (ISO VG 32-68) is required.
·
Performance, Features & Benefits
·
Long oil life – Maintenance saving
Shell Corena S4 R is designed to provide rapid air release
Shell Corena S4 R is capable of providing oil maintenance
without excessive foaming to give trouble-free operation
intervals of 10,000 hours (where allowed by manufacturers)
even under cycling conditions, helping to ensure reliable
even when operating at maximum discharge temperatures
start-up and continuous compressed air availability.
0
·
·
·
Maintaining System Efficiency
in excess of 100 C. This may be extended up to 12,000
Shell Corena S4 R also has low volatility which can result in
hours under certain conditions.
lower evaporation and oil carryover in the compressor,
The advanced formulation of Shell Corena S4 R helps
providing reduced oil top-up requirements in combination
deliver exceptional oil life through:
with increased air quality
Exceptional resistance to thermal and chemical breakdown.
In addition, Shell Corena S4 R has excellent water
Resist formation of deposits on rotating components in
separation properties to help ensure continuous efficient
screw compressors and in sliding vane slots for continuous
operation of the compressor even in the presence of water.
efficient operation.
Main Applications
Exceptionally low levels of deposit formation to help
maintain excellent internal surface cleanliness particularly
in oil/air separator and coalescer systems.
The exact oil maintenance interval will depend on intake air
quality, duty cycle and ambient conditions. For hot and
·
·
Rotary sliding vane and screw air compressors
Shell Corena S4 R is suitable for use in oil-flooded/ oil
humid type climates as found in the Asian and Pacific
injected single or two-stage rotary vane or screw air
regions, the lower oil drain period of 10,000hrs is
compressors.
recommended (also consult OEM recommendations).
Outstanding wear protection
·
Severe service conditions
May be used where exceptionally high ambient temperatures
Shell Corena S4 R helps provide exceptional protection of
internal metal surfaces from corrosion and wear.
It contains an advanced ashless anti-wear system to help
prolong the life of critical parts such as bearings and gears.
·
or humidity are found.
Bearing & Circulating Oil
Perfectly suitable to cover applications where a synthetic
bearing & circulating oil or R&O oil (ISO VG 32-68) is
required, and will provide benefits due to increased
resistance to deposits formation, improved low temperature
fluidity and lowering of equipment operating temperatures.
Page 1 of 3
Corena S4 R 68, v 2.4
07.09.2018.08.51
Specifications, Approvals & Recommendations
·
·
Compatibility & Miscibility
·
ISO 6743-3:2003(E) L-DAJ
Miscibility
Shell Corena S4 R 68 is approved by ABB for use in VTR
Shell Corena S4 R is fully miscible with mineral oils,
turbochargers, with a maximum oil change interval of
although dilution with mineral lubricants will markedly reduce
5,000hrs
its performance. Care must be taken to avoid mixing Shell
Corena S4 R with certain other types of synthetic fluids.
For a full listing of equipment approvals and
recommendations, please consult your local Shell
·
Technical Helpdesk.
Contact your Shell representative for further information.
Seal Compatibility
Shell Corena S4 R oils are compatible with seal materials
specified for use with mineral oils.
Typical Physical Characteristics
Properties
Method
ISO 3448
ISO Viscosity Grade
Shell Corena S4 R 68
68
ASTM D445
68
ASTM D445
10.2
DIN ISO 2909
135
kg/m
ASTM D1298
848
Flash Point (COC)
0
C
ASTM D92
248
Air Release
minutes
ASTM D3427
4
RPVOT
minutes minimun
ASTM D2272
2100
FZG Test
LS Fail
CEC-L-07-A-95
12
Pour Point
0
C
ASTM D97
-48
minutes
ASTM D1401
10
Kinematic Viscosity
Kinematic Viscosity
@400C
0
mm2/s
@100 C
2
mm /s
Viscosity Index
Density
Water Separability
0
@15 C
0
@54 C
3
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Corena S4 R is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Corena S4 R 68, v 2.4
07.09.2018.08.51
Page 3 of 3
Corena S4 R 68, v 2.4
07.09.2018.08.51
Table of Content
No. Product Name
1.
Air Tool Oil S2 A 100
2.
Air Tool Oil S2 A 320
Technical Data Sheet
Formerly Known As: Shell Torcula Oils
• Reliable Protection
• Mist Lubrication
Shell Air Tool S2 A 100
Pneumatic Tool and Rock Drill Oils
Shell Air Tool S2 A has been developed to meet the special lubrication requirements of pneumatic tools,
including percussion type pneumatic tools subjected to the most arduous conditions. They are designed to
maintain high oil film strength and effectively lubricate even the most demanding requirements of pneumatic drill
impact mechanisms as well as providing excellent mist lubrication of general purpose air tools.
·
Performance, Features & Benefits
·
Suitable for a wide range of mobile percussive pneumatic
Reliable wear & corrosion protection
tools such as those used in rock drilling, mining and
Shell Air Tool Oil S2 A has been developed to provide
construction activities (e.g. jack hammers, sinkers and other
excellent lubricity and anti-wear properties to protect
percussion tools including rock drills operating under
arduous conditions.
·
air operated tools).
Oil mist lubrication applications
Shell Air Tool Oil can also be used in applications requiring
It also provides high levels of corrosion protection even
mist lubrication, such as air tool installations commonly
under severe water wash conditions.
The high oil film strength provides for excellent load
·
Percussive pneumatic tools
carrying performance and increased drill life.
·
found in manufacturing.
Other applications
May be used in certain gear and bearing lubrication systems
Maintaining system efficiency
subject to water ingress.
To ensure efficient lubrication under the full range of
Specifications, Approvals & Recommendations
operation, Shell Air Tool Oil S2 A has good low
temperature fluidity at low temperatures to provide
consistent lubrication and to resist oil build-up in areas
·
ISO 6743-11 Types PAC and PBC
For a full listing of equipment approvals and
cooled by rapid air expansion.
recommendations, please consult your local Shell Technical
Shell Air Tool Oil S2 A has excellent emulsability enabling
Helpdesk.
lubrication in a wet environment.
Main Applications
Compatibility & Miscibility
·
Seal & Paint Compatibility
Shell Air Tool Oil S2 A is compatible with seal materials and
paints normally specified for use with mineral oils.
Page 1 of 2
Air Tool Oil S2 A 100, v 2.2
07.09.2018.13.12
Typical Physical Characteristics
Properties
ISO Viscosity Grade
Method
ISO 3448
Air Tool S2 A 100
100
Kinematic Viscosity
@400C
mm2/s
ISO 3104
100
Kinematic Viscosity
@1000C
mm2/s
ISO 3104
11.5
ISO 2909
102
Viscosity Index
Flash Point
0
ISO 2592 (COC)
241
Pour Point
0
C
ISO 3016
-24
kg/m3
ISO 12185
884
Density
C
@150C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Air Tool Oil S2 A 100, v 2.2
07.09.2018.13.12
Technical Data Sheet
Formerly Known As: Shell Torcula Oils
• Reliable Protection
• Mist Lubrication
Shell Air Tool S2 A 320
Pneumatic Tool and Rock Drill Oils
Shell Air Tool S2 A has been developed to meet the special lubrication requirements of pneumatic tools,
including percussion type pneumatic tools subjected to the most arduous conditions. They are designed to
maintain high oil film strength and effectively lubricate even the most demanding requirements of pneumatic drill
impact mechanisms as well as providing excellent mist lubrication of general purpose air tools.
·
Performance, Features & Benefits
·
Suitable for a wide range of mobile percussive pneumatic
Reliable wear & corrosion protection
tools such as those used in rock drilling, mining and
Shell Air Tool Oil S2 A has been developed to provide
construction activities (e.g. jack hammers, sinkers and other
excellent lubricity and anti-wear properties to protect
percussion tools including rock drills operating under
arduous conditions.
·
air operated tools).
Oil mist lubrication applications
Shell Air Tool Oil can also be used in applications requiring
It also provides high levels of corrosion protection even
mist lubrication, such as air tool installations commonly
under severe water wash conditions.
The high oil film strength provides for excellent load
·
Percussive pneumatic tools
carrying performance and increased drill life.
·
found in manufacturing.
Other applications
May be used in certain gear and bearing lubrication systems
Maintaining system efficiency
subject to water ingress.
To ensure efficient lubrication under the full range of
Specifications, Approvals & Recommendations
operation, Shell Air Tool Oil S2 A has good low
temperature fluidity at low temperatures to provide
consistent lubrication and to resist oil build-up in areas
·
ISO 6743-11 Types PAC and PBC
For a full listing of equipment approvals and
cooled by rapid air expansion.
recommendations, please consult your local Shell Technical
Shell Air Tool Oil S2 A has excellent emulsability enabling
Helpdesk.
lubrication in a wet environment.
Main Applications
Compatibility & Miscibility
·
Seal & Paint Compatibility
Shell Air Tool Oil S2 A is compatible with seal materials and
paints normally specified for use with mineral oils.
Page 1 of 2
Air Tool Oil S2 A 320, v 2.2
07.09.2018.13.15
Typical Physical Characteristics
Properties
ISO Viscosity Grade
Method
ISO 3448
Air Tool S2 A 320
320
Kinematic Viscosity
@400C
mm2/s
ISO 3104
320
Kinematic Viscosity
@1000C
mm2/s
ISO 3104
25
ISO 2909
100
Viscosity Index
Flash Point
0
ISO 2592 (COC)
248
Pour Point
0
C
ISO 3016
-18
kg/m3
ISO 12185
895
Density
C
@150C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Air Tool Oil S2 A 320, v 2.2
07.09.2018.13.15
Table of Content
No. Product Name
1.
Gadus S1 A320 3
14.
Gadus S3 T220 2
2.
Gadus S1 OG 200
15.
Gadus S5 V220 2
3.
Gadus S2 V100 2
4.
Gadus S2 V100 3
5.
Gadus S2 V220 0
6.
Gadus S2 V220 1
7.
Gadus S2 V220 2
8.
Gadus S2 V220AC 2
9.
Gadus S2 V220AD 2
10.
Gadus S2 V460A 2
11.
Gadus S3 V220C 2
12.
Gadus S3 V220C 3
13.
Gadus S3 T150J 2
Technical Data Sheet
Formerly Known As: Shell Multiroad Grease CT 3
• Multi-purpose Application
• Calcium
Shell Gadus S1 A320 3
Multi-purpose Grease
Shell Gadus S1 A320 is a light-duty grease based on mineral oil and a calcium soap thickener with tackifier
additives.
·
·
·
·
·
Performance, Features & Benefits
·
Excellent water wash-out resistance
Prevents corrosion. An excellent quality for vehicles
·
working in wet environments.
Good adhesive properties
Reduces losses, reducing grease consumption.
Commercial vehicle chassis lubrication
Shackle pins
Ball joints
Suspension joints
Shell Gadus S1 A320 is NOT suitable for the lubrication of
automotive wheel bearings.
Main Applications
Specifications, Approvals & Recommendations
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
·
Helpdesk.
Shell Gadus S1 A320 is used for the following automotive
applications:
Typical Physical Characteristics
Properties
Method
NLGI Consistency
Shell Gadus S1 A320 3
3
Brown
Colour
Soap Type
Calcium
Base Oil Type
Mineral
Kinematic Viscosity
@400C
cSt
IP 71 / ASTM D445
320
Kinematic Viscosity
@1000C
cSt
IP 71 / ASTM D445
27
Cone Penetration, Worked
@250C
0.1mm
IP 50 / ASTM D217
220-250
0
IP 396
Dropping Point
C
90
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Gadus S1 A320 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
Page 1 of 2
Gadus S1 A320 3, v 2.1
11.03.2019.07.22
·
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Gadus S1 A320 3, v 2.1
11.03.2019.07.22
Technical Data Sheet
Previous Name: Shell Cardium Compound, Cardium Compound EP
Shell Gadus S1 OG 200
• Suitable Wear Resistance
• Bitumen
Open Gear and Wire Rope Grease
Shell Gadus S1 OG are a range of high viscosity, residual-type (bituminous) lubricants, which are recommended
principally for open gears, sugar mills and wire rope applications which require an adhesive, high load-carrying, EP
product. All grades are blends of bitumen and heavy mineral based oils, blended in different proportions to suit
various applications.
· Shell Gadus S1 OG are recommended for use in open gears
Performance, Features & Benefits
· Strongly adhesive and resistant to water washout
· Excellent load carrying capacity
· Good corrosion resistance
and cane bearings operating with high loads and low speeds.
They may also be used for lubrication of wire ropes.
Specifications, Approvals & Recommendations
For a full listing of equipment approvals and recommendations,
Main Applications
please consult your local Shell Technical Helpdesk.
Typical Physical Characteristics
Properties
Method
Shell Gadus S1 OG 200
Black
ISO 3104
200
ASTM D92
Min 2100C
Colour
Kinematic Viscosity
@1000C
mm2/s
Flash Point (COC)
4 Ball Weld Load
kg
Copper Corrosion
ASTM D2596
Min 250
ASTM D4048
1b
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Health, Safety & Environment
· Health and Safety
Shell Gadus S1 OG is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 1 of 1
Shell Gadus S1 OG 200, v 2.1
28.08.2014.12.14
Technical Data Sheet
Formerly Known As: Shell Alvania Grease RL 2
• Reliable Protection
• Multi-purpose
• Lithium
Shell Gadus S2 V100 2
High Performance Multipurpose Grease
Shell Gadus S2 V100 2 is a general purpose grease based on a new lithium hydroxystearate soap thickener
fortified with anti-oxidant, anti-wear and anti-rust additives.
·
·
·
·
Performance, Features & Benefits
·
Reliable high temperature performance
Very good performance up to +1300C, resulting in longer
·
bearing life.
Electric motor bearings
Sealed-for-life bearings
Water pump bearings
Good oxidation and mechanical stability
May be used under a wide range of operating conditions
Resists the formation of deposits caused by oxidation at
offering very significant advantages over conventional lithium
high operating temperatures. Shell Gadus S2 V100
greases at high temperature or in the presence of water.
·
greases are extremely stable under vibrations and give NO
·
·
Rolling element and plain grease lubricated bearings
LEAKAGE even in repeated shock-loaded bearings.
A medium consistency grease designed, mainly, for general
industrial lubrication. Ideal for centralised lubrication systems
Good corrosion resistance characteristics
operating at normal temperatures.
Effective protection in hostile environments.
Specifications, Approvals & Recommendations
Long storage life
For a full listing of equipment approvals and
Does not alter in consistency during prolonged storage.
recommendations, please consult your local Shell Technical
Helpdesk.
Main Applications
Typical Physical Characteristics
Properties
Method
NLGI Consistency
Shell Gadus S2 V100 2
2
Soap Type
Lithium hydroxystearate
Mineral
Base Oil (Type)
Kinematic Viscosity
@400C
cSt
IP 71 / ASTM D445
100
Kinematic Viscosity
@1000C
cSt
IP 71 / ASTM D445
11
Cone Penetration, Worked
@250C
0.1mm
IP 50 / ASTM D217
265-295
0
IP 396
Dropping Point
C
180
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Page 1 of 2
Gadus S2 V100 2, v 1.1
11.03.2019.07.30
Health, Safety & Environment
·
Health and Safety
Shell Gadus S2 V100 Grease is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
·
Re-greasing Intervals
For bearings operating near their maximum recommended temperatures, re-greasing intervals should be reviewed.
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Gadus S2 V100 2, v 1.1
11.03.2019.07.30
Technical Data Sheet
Formerly Known As: Shell Alvania Grease RL 3
• Reliable Protection
• Multi-purpose
• Lithium
Shell Gadus S2 V100 3
High Performance Multipurpose Grease
Shell Gadus S2 V100 3 is a general purpose grease based on a new lithium hydroxystearate soap thickener
fortified with anti-oxidant, anti-wear and anti-rust additives.
·
·
·
·
Performance, Features & Benefits
·
Reliable high temperature performance
Very good performance up to +1300C, resulting in longer
·
bearing life.
Electric motor bearings
Sealed-for-life bearings
Water pump bearings
Good oxidation and mechanical stability
May be used under a wide range of operating conditions
Resists the formation of deposits caused by oxidation at
offering very significant advantages over conventional lithium
high operating temperatures. Shell Gadus S2 V100
greases at high temperature or in the presence of water.
·
greases are extremely stable under vibrations and give NO
·
·
Rolling element and plain grease lubricated bearings
LEAKAGE even in repeated shock-loaded bearings.
A medium/hard high performance industrial grease,
particularly recommended for the lubrication of electrical
Good corrosion resistance characteristics
motor bearings.
Effective protection in hostile environments.
Specifications, Approvals & Recommendations
Long storage life
For a full listing of equipment approvals and
Does not alter in consistency during prolonged storage.
recommendations, please consult your local Shell Technical
Helpdesk.
Main Applications
Typical Physical Characteristics
Properties
Method
NLGI Consistency
Shell Gadus S2 V100 3
3
Soap Type
Lithium hydroxystearate
Mineral
Base Oil (Type)
Kinematic Viscosity
@400C
cSt
IP 71 / ASTM D445
100
Kinematic Viscosity
@1000C
cSt
IP 71 / ASTM D445
11
Cone Penetration, Worked
@250C
0.1mm
IP 50 / ASTM D217
220-250
0
IP 396
Dropping Point
C
180
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Page 1 of 2
Gadus S2 V100 3, v 1.1
11.03.2019.07.32
Health, Safety & Environment
·
Health and Safety
Shell Gadus S2 V100 Grease is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
·
Re-greasing Intervals
For bearings operating near their maximum recommended temperatures, re-greasing intervals should be reviewed.
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Gadus S2 V100 3, v 1.1
11.03.2019.07.32
Technical Data Sheet
Formerly Known As: Shell Alvania Grease EP(LF) 0
• Reliable Protection
• Multi-purpose
• Lithium
Shell Gadus S2 V220 0
High Performance Multipurpose Extreme Pressure Grease
Shell Gadus S2 V220 greases are high quality multipurpose, extreme-pressure greases based on a blend of high
viscosity index mineral oils and a lithium hydroxystearate soap thickener and contain extreme-pressure and other
proven additives to enhance their performance in a wide range of applications.
Shell Gadus S2 V220 greases are designed for multipurpose grease lubrication of rolling element and plain
bearings as well as hinges and sliding surfaces such as those found in throughout most industrial and transport
sectors.
·
Performance, Features & Benefits
·
·
Anti- corrosion protection
Outstanding load carrying capacity
Shell Gadus S2 V220 greases have an affinity with metal
Shell Gadus S2 V220 greases contain special extreme-
and have the ability to protect bearing surfaces against
pressure additives which enable them to withstand heavy
corrosion, even when the grease is contaminated with water.
and shock loads without failure of the lubricant film.
Main Applications
Improved mechanical stability
This is particularly important in vibrating environments
where poor mechanical stability can lead to grease
softening with subsequent loss of lubrication performance
·
Shell Gadus S2 V220 0 greases are specifically designed for:
·
·
and leakage.
Good resistance to water wash-out
Shell Gadus S2 V220 greases have been formulated to
·
offer resistance to water wash-out.
Steel mill lubrication where a softer grease is necessary for
specialised dispensing systems.
Heavy duty plain and rolling element bearings operating
under harsh conditions including shock loading in wet
environments.
Oxidation stability
Specially selected base oil components have excellent
Specifications, Approvals & Recommendations
oxidation resistance. Their consistency will not alter in
For a full listing of equipment approvals and
storage and they withstand high operating temperatures
recommendations, please consult your local Shell Technical
without hardening or forming bearing deposits.
Helpdesk.
Typical Physical Characteristics
Properties
Method
NLGI Consistency
Shell Gadus S2 V220 0
0
Soap Type
Lithium
Base Oil
Mineral
Kinematic Viscosity
@400C
cSt
IP 71 / ASTM D445
220
Kinematic Viscosity
@1000C
cSt
IP 71 / ASTM D445
19
Cone Penetration, Worked
@250C
0.1mm
IP 50 / ASTM D217
355-385
Dropping Point
0
C
IP 396
Four Ball Weld Load
Kg minimum
ASTM D2596
Page 1 of 2
Gadus S2 V220 0, v 1.4
250
11.03.2019.07.36
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Gadus S2 V220 Grease is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
·
http://www.epc.shell.com
Hydraulic Brake Rubber Components
Care should be taken to ensure that the grease does NOT come into contact with hydraulic brake rubber components.
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
·
·
Re-greasing Intervals
For bearings operating near their maximum recommended temperatures, re-greasing intervals should be reviewed.
Operating Temperature
-200C to +1200C
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Gadus S2 V220 0, v 1.4
11.03.2019.07.36
Technical Data Sheet
Formerly Known As: Shell Alvania Grease EP(LF) 1
• Reliable Protection
• Multi-purpose Applications
• Lithium
Shell Gadus S2 V220 1
High Performance Multipurpose Extreme Pressure Grease
Shell Gadus S2 V220 greases are high quality multipurpose, extreme-pressure greases based on a blend of high
viscosity index mineral oils and a lithium hydroxystearate soap thickener and contain extreme-pressure and other
proven additives to enhance their performance in a wide range of applications.
Shell Gadus S2 V220 greases are designed for multipurpose grease lubrication of rolling element and plain
bearings as well as hinges and sliding surfaces such as those found in throughout most industrial and transport
sectors.
Performance, Features & Benefits
·
Main Applications
Outstanding load carrying capacity
Shell Gadus S2 V220 greases contain special extremepressure additives which enable them to withstand heavy
·
and shock loads without failure of the lubricant film.
Improved mechanical stability
This is particularly important in vibrating environments
where poor mechanical stability can lead to grease
softening with subsequent loss of lubrication performance
·
and leakage.
·
·
·
·
Heavy duty bearings served by centralised dispensing
equipment.
Extreme-pressure gear grease for applications at normal
ambient temperature.
Heavy duty plain and rolling element bearings operating
under harsh conditions including shock loading in wet
Good resistance to water wash-out
Shell Gadus S2 V220 greases have been formulated to
·
Shell Gadus S2 V220 1 grease is designed for:
offer resistance to water wash-out.
Oxidation stability
·
environments.
Low temperature greasing applications.
Specifications, Approvals & Recommendations
Specially selected base oil components have excellent
For a full listing of equipment approvals and
oxidation resistance. Their consistency will not alter in
recommendations, please consult your local Shell Technical
storage and they withstand high operating temperatures
Helpdesk.
without hardening or forming bearing deposits.
Anti- corrosion protection
Shell Gadus S2 V220 greases have an affinity with metal
and have the ability to protect bearing surfaces against
corrosion, even when the grease is contaminated with
water.
Typical Physical Characteristics
Properties
Method
NLGI Consistency
Shell Gadus S2 V220 1
1
Soap Type
Lithium
Base Oil
Mineral
Page 1 of 2
Gadus S2 V220 1, v 1.4
11.03.2019.07.38
Properties
Kinematic Viscosity
0
@40 C
cSt
Method
IP 71 / ASTM D445
Shell Gadus S2 V220 1
220
Kinematic Viscosity
@100 C
cSt
IP 71 / ASTM D445
19
Cone Penetration, Worked
@250C
0.1mm
IP 50 / ASTM D217
310-340
Dropping Point
0
C
IP 396
180
Four Ball Weld Load
Kg minimum
ASTM D2596
315
0
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Gadus S2 V220 Grease is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
·
http://www.epc.shell.com
Hydraulic Brake Rubber Components
Care should be taken to ensure that the grease does NOT come into contact with hydraulic brake rubber components.
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
·
Re-greasing Intervals
For bearings operating near their maximum recommended temperatures, re-greasing intervals should be reviewed.
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Gadus S2 V220 1, v 1.4
11.03.2019.07.38
Technical Data Sheet
Formerly Known As: Shell Alvania Grease EP(LF) 2, Shell Retinax EP 2
• Reliable Protection
• Multi-purpose Applications
• Lithium
Shell Gadus S2 V220 2
High Performance Multipurpose Extreme Pressure Grease
Shell Gadus S2 V220 greases are high quality multipurpose, extreme-pressure greases based on a blend of high
viscosity index mineral oils and a lithium hydroxystearate soap thickener and contain extreme-pressure and other
proven additives to enhance their performance in a wide range of applications.
Shell Gadus S2 V220 greases are designed for multipurpose grease lubrication of rolling element and plain
bearings as well as hinges and sliding surfaces such as those found in throughout most industrial and transport
sectors.
·
Performance, Features & Benefits
·
·
Good Corrosion Resistance Characteristics
Outstanding Load Carrying Capacity
Shell Gadus S2 V220 greases reliably protect bearing
Shell Gadus S2 V220 greases contain special extreme-
surfaces against corrosion, even when a high amount of
pressure additives which enable them to withstand heavy
water is present.
and shock loads without failure of the lubricant film.
Main Applications
Improved Mechanical Stability
This is particularly important in vibrating environments
where poor mechanical stability can lead to grease
softening with subsequent loss of lubrication performance
·
Shell Gadus S2 V220 2 greases are designed for:
·
·
and leakage.
Good Resistance to Water Wash-out
Shell Gadus S2 V220 greases have been formulated to
·
Heavy duty bearings and general industrial lubrication.
Heavy duty plain and rolling element bearings operating
under harsh conditions including shock loading in wet
offer resistance to water wash-out.
environments.
Oxidation Stability
Specifications, Approvals & Recommendations
Specially selected base oil components have excellent
For a full listing of equipment approvals and
oxidation resistance. Their consistency will not alter in
recommendations, please consult your local Shell Technical
storage and they withstand high operating temperatures
Helpdesk.
without hardening or forming bearing deposits.
Typical Physical Characteristics
Properties
Method
NLGI Consistency
Shell Gadus S2 V220 2
2
Soap Type
Lithium
Base Oil
Mineral
Kinematic Viscosity
@400C
cSt
IP 71 / ASTM D445
220
Kinematic Viscosity
@1000C
cSt
IP 71 / ASTM D445
19
Cone Penetration, Worked
@250C
0.1mm
IP 50 / ASTM D217
265-295
Dropping Point
0
C
IP 396
180
Four Ball Weld Load
Kg
ASTM D2596
315
Page 1 of 2
Gadus S2 V220 2, v 3.5
11.03.2019.07.40
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Gadus S2 V220 Grease is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
·
http://www.epc.shell.com/
Hydraulic Brake Rubber Components
Care should be taken to ensure that the grease does NOT come into contact with hydraulic brake rubber components.
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
·
·
Operating Temperature
Shell Gadus S2 V220 2 is recommended for the operating temperature range -200C to +1300C.
Re-greasing Intervals
For bearings operating near their maximum recommended temperatures, re-greasing intervals should be reviewed.
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Gadus S2 V220 2, v 3.5
11.03.2019.07.40
Technical Data Sheet
Formerly Known As: Shell Alvania Grease WR 2, Shell Alvania HD 2, Shell Retinax
HD 2
• Reliable Protection
• Water Resistant
• Red Lithium Calcium
Shell Gadus S2 V220AC 2
High Performance Multi-purpose Extreme Pressure Grease
Shell Gadus S2 V220AC greases are high quality multi-purpose greases based on high viscosity index mineral oil
and a mixed lithium/calcium soap thickener. They contain extreme-pressure, anti-wear, anti-oxidation and anticorrosion additives to enhance their performance in a wide range of applications.
Performance, Features & Benefits
·
Main Applications
Excellent mechanical stability even under vibrating
conditions.
Consistency retained over long periods, even in conditions
·
·
·
·
·
·
·
·
of severe vibration.
Good corrosion resistance.
Provides protection from the elements of corrosion.
Extended life at moderate temperatures.
Allows longer periods between maintenance schedules
reducing down-time and grease consumption.
Demonstrated to work in the field with regreasing intervals
above 30,000 kms even for demanding applications such
·
Heavy-duty plain and rolling element bearings operating in
the following environments:
Vibrating conditions
Heavy load
High temperature
Shock load
Presence of water
as transmission joints.
Multipurpose convenience, especially in the transport sector
Good oil separation.
where product can be used for both wheelbearings and
Effective lubrication and reliable performance.
chassis lubrication of passenger cars, light trucks and heavy
Specifications, Approvals & Recommendations
·
duty trucks. These greases are also suitable for construction
equipment exposed to intense water washout.
ASTM D4950 LB
For a full listing of equipment approvals and
recommendations, please consult your local Shell
Technical Helpdesk.
Typical Physical Characteristics
Properties
Method
NLGI Consistency
Shell Gadus S2 V220AC 2
2
Red
Colour
Lithium/Calcium
Soap Type
Mineral
Base Oil
Kinematic Viscosity
@400C
cSt
IP 71 / ASTM D445
220
Kinematic Viscosity
@1000C
cSt
IP 71 / ASTM D445
18
Cone Penetration, Worked
@250C
0.1mm
IP 50 / ASTM D217
265-295
0
IP 396
Dropping Point
Page 1 of 2
C
Gadus S2 V220AC 2, v 1.5
180
09.10.2018.13.11
Properties
Four Ball Weld Load
Kg minimum
Method
ASTM D2596
Shell Gadus S2 V220AC 2
315
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Gadus S2 V220AC Grease is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Operating Temperature Range
Shell Gadus S2 V220AC greases are recommended for the grease lubrication of heavy duty bearings operating up to their
·
maximum rated speed over the temperature range -200C to 1300C (1400C peak)
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Gadus S2 V220AC 2, v 1.5
09.10.2018.13.11
Technical Data Sheet
Formerly Known As: Shell Alvania Grease HDX, Shell Retinax HDX
• Heavy Duty Protection
• Water Resistant
• Lithium Calcium
Shell Gadus S2 V220AD 2
High Performance Multi-purpose Grease with Solids
Shell Gadus S2 V220AD Greases are high performance grease for the lubrication of bearings subjected to harsh
conditions.
They are based on high viscosity index mineral oil and a mixed lithium/calcium soap thickener and contains
extreme-pressure, anti-oxidation, anti-wear, anti-corrosion and adhesion additives. It also contains solids to
provide resistance to shock loading.
Performance, Features & Benefits
·
Main Applications
Good oxidation and mechanical stability
Resists the formation of deposits caused by oxidation at
high operating temperatures and maintains consistency,
·
·
·
·
·
reducing leakage.
Shell Gadus S2 V220AD Greases are recommended for the
Good corrosion resistance
lubrication of shock loaded heavy duty bearings working in
Provides protection from the elements of corrosion.
damp hostile conditions. They are well-suited for use in off-
For shock loaded conditions
highway applications and also for the lubrication of fifth
Resists breakdown, softening and subsequent leakage
wheels.
under shock loads.
Specifications, Approvals & Recommendations
Good adhesion properties
For a full listing of equipment approvals and
Reduces losses and grease consumption.
recommendations, please consult your local Shell Technical
Extreme pressure performance
Helpdesk.
Rig tests confirm EP additives in Shell Gadus S2 V220AD
Greases prolong bearing life when subjected to heavy and
shock loads.
Typical Physical Characteristics
Properties
Method
NLGI Consistency
Shell Gadus S2 V220AD 2
2
Black
Colour
Lithium/Calcium
Soap Type
Mineral
Base Oil
cSt
IP 71 / ASTM D445
220
cSt
IP 71 / ASTM D445
18
0.1mm
IP 50 / ASTM D217
265-295
Dropping Point
0
C
IP 396
175
4 Ball Weld Load
Kg typical
IP 239
400
4 Ball Weld Load
Kg minimum
IP 239
315
Kinematic Viscosity
Kinematic Viscosity
Cone Penetration, Worked
0
@40 C
0
@100 C
0
@25 C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Page 1 of 2
Gadus S2 V220AD 2, v 2.2
11.03.2019.07.42
Health, Safety & Environment
·
Health and Safety
Shell Gadus S2 V220AD Grease is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
·
Operating Temperature Range
Operating Temperature Range -250C to +1200C, peak 1300C
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Gadus S2 V220AD 2, v 2.2
11.03.2019.07.42
Technical Data Sheet
Previous Names: Shell Alvania Grease WR 2 (460), Alvania HD
• Heavy duty protection
• Water resistant
• Lithium Calcium
Shell Gadus S2 V460A 2
High performance multipurpose heavy duty grease
· Convenience
Performance, Features & Benefits
· Cost Savings
One supplier for all requirements, reduces time wasted on calls
Reduced grease consumption versus high quality Lithium
to numerous suppliers, simplifies way of working.
greases, due to excellent adhesiveness, better resistance to
Guaranteed suitable lubrication of equipment world-wide, as
washout & vibration that result from Shell’s “in house”
this product is part of the International SeaShell range of
formulation & manufacturing expertise.
products, which can be found throughout the world.
Lower waste grease disposal costs that result from lower
Availability wherever required, Nationally & Internationally
usage.
(Shell now markets lubricants in more than 100 countries).
Lower maintenance costs due to prolonged bearing operation
Main Applications
that is possible when high quality, superior products are used.
Lower total labour costs, due to the extended lubrication
intervals & less downtime that results from using a superior
performance product.
·
· Steel, Cement
Peace of Mind
Heavy-duty plain and rolling element bearings operating in the
The knowledge that Shell is in FULL control from Research &
Development to manufacture & quality assurance in our own
QS and ISO approved plants, which have often been audited
and passed by quality conscious customers.
Availability of Shell expertise, to assist in safely developing the
cost savings available from the wide range of Shell products.
· Proven products that have been demonstrated to work in a
following environments:
· Water rich environments.
· Heavy/shock loads.
Specifications, Approvals & Recommendations
For a full listing of equipment approvals and recommendations,
please consult your local Shell Technical Helpdesk.
range of field applications, giving them the pedigree expected
from the largest Grease marketer in the world
Shell brand which guarantees professional standards &
guaranteed back up whatever the lubrication problem.
Typical Physical Characteristics
Properties
Method
NLGI Consistency
Lithium/Calcium
Soap Type
Mineral
Base Oil
Kinematic Viscosity
Cone Penetration, Worked
Dropping Point
Shell Gadus S2 V460A 2
2
0
cSt
IP 71 / ASTM D445
460
0
0.1mm
IP 50 / ASTM D217
265-295
0
IP 396
@40 C
@25 C
C
175
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Page 1 of 2
Shell Gadus S2 V460A 2, v 1.1
13.05.2014.11.52
Health, Safety & Environment
· Health and Safety
Shell Gadus S2 V460A 2 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Operating Temperature Range
Shell Gadus S2 V460A is recommended for use over the temperature range -200C to 1300C (1400C peak).
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Shell Gadus S2 V460A 2, v 1.1
13.05.2014.11.52
Technical Data Sheet
Formerly Known As: Shell Albida Grease EP 2, Shell Retinax LX 2
• Extra Protection
• High Temperature
• Red Lithium Complex
Shell Gadus S3 V220C 2
Premium multipurpose extreme-pressure grease
Shell Gadus S3 V220C greases are premium multi-purpose greases based on high viscosity index mineral oil
and a lithium complex soap thickener. They contain the latest additives to offer excellent high temperature
oxidation performance and other additives to enhance its anti-oxidation, anti-wear and anti-corrosion properties.
Shell Gadus S3 V220C greases are especially suitable for bearings operating at high temperature and under
load.
·
Performance, Features & Benefits
·
Excellent mechanical stability even under vibrating
lubrication of heavy-duty bearings used in machinery found
conditions.
in the following applications:
amounts of water.
·
·
·
·
·
·
High dropping point.
Specifications, Approvals & Recommendations
Consistency retained over long periods, even in conditions
·
·
of severe vibration.
Enhanced extreme-pressure properties.
Excellent load-carrying performance.
Good water resistance.
Ensures lasting protection even in the presence of large
·
·
·
Shell Gadus S3 V220C greases are used for the grease
·
·
Long operational life at high temperatures.
Effective corrosion protection.
Ensures components/bearings do not fail due to corrosion.
Continuous casting
Vibrating sieves
Quarries
Breakers
Roller conveyors
Automotive Wheelbearings
SEB 18 12 53
ASTM D4950 LB-GC
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Main Applications
Helpdesk.
Typical Physical Characteristics
Properties
Method
NLGI Consistency
Red
Colour
Lithium complex
Soap Type
Mineral
Base Oil Type
Base Oil Viscosity
Base Oil Viscosity
Cone Penetration, Worked
Dropping Point
0
@40 C
0
@100 C
0
@25 C
cSt
IP 71 / ASTM D445
220
cSt
IP 71 / ASTM D445
19
0.1mm
IP 50 / ASTM D217
265-295
0
IP 396
C
240
Fair
Pumpability Long Distance
Page 1 of 2
Shell Gadus S3 V220C 2
2
Gadus S3 V220C 2, v 2.7
11.03.2019.07.48
Properties
Four Ball Weld Load
Kg minimum
Method
ASTM D2596
Shell Gadus S3 V220C 2
315
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Gadus S3 V220C Grease is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
·
·
Operating Temperature
Operating temperature range -200C to 1400C (peak 1500C)
Re-greasing Intervals
For bearings operating near their maximum recommended temperatures, re-greasing intervals should be reviewed
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Gadus S3 V220C 2, v 2.7
11.03.2019.07.48
Technical Data Sheet
Formerly Known As: Shell Retinax LX 3
• Extra Protection
• High Temperature
• Red Lithium Complex
Shell Gadus S3 V220C 3
Premium multipurpose extreme-pressure grease
Shell Gadus S3 V220C greases are premium multi-purpose greases based on high viscosity index mineral oil
and a lithium complex soap thickener. They contain the latest additives to offer excellent high temperature
oxidation performance and other additives to enhance its anti-oxidation, anti-wear and anti-corrosion properties.
Shell Gadus S3 V220C greases are especially suitable for bearings operating at high temperature and under
load.
Performance, Features & Benefits
·
Main Applications
Excellent mechanical stability even under vibrating
conditions.
Consistency retained over long periods, even in conditions
·
·
·
of severe vibration.
Enhanced extreme-pressure properties.
lubrication of heavy-duty bearings used in machinery found
Excellent load-carrying performance.
in the following applications:
·
·
·
·
·
·
Good water resistance.
Ensures lasting protection even in the presence of large
·
·
·
Shell Gadus S3 V220C greases are used for the grease
amounts of water.
High dropping point.
Long operational life at high temperatures.
Effective corrosion protection.
Ensures components/bearings do not fail due to corrosion.
Continuous casting
Vibrating sieves
Quarries
Breakers
Roller conveyors
Automotive Wheelbearings
Specifications, Approvals & Recommendations
·
ASTM D4950 LB-GC
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Helpdesk.
Typical Physical Characteristics
Properties
Method
NLGI Consistency
Shell Gadus S3 V220C 3
3
Red
Colour
Lithium complex
Soap Type
Mineral
Base Oil Type
Base Oil Viscosity
@400C
cSt
IP 71 / ASTM D445
220
Base Oil Viscosity
@1000C
cSt
IP 71 / ASTM D445
19
Cone Penetration, Worked
@250C
0.1mm
IP 50 / ASTM D217
220-250
0
IP 396
Dropping Point
Page 1 of 2
C
Gadus S3 V220C 3, v 1.4
240
11.03.2019.07.52
Properties
Method
Pumpability Long Distance
Shell Gadus S3 V220C 3
Fair
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Gadus S3 V220C Grease is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
·
Re-greasing Intervals
For bearings operating near their maximum recommended temperatures, re-greasing intervals should be reviewed
Operating Temperature
-200C to +1400C (peak 1500C)
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Gadus S3 V220C 3, v 1.4
11.03.2019.07.52
Technical Data Sheet
Previous Name: Shell Stamina Grease RL 2 J
• Extra Protection
• Extreme Temperature
• Polyurea
Shell Gadus S3 T150J 2
Premium Quality Industrial Bearing Greases
Shell Gadus S3 T150 J Grease is a high technology grease designed to give optimum performance for grease
lubrication in industrial bearings.
It is based on mineral oil with a special diurea thickener to give long life, low wear and shear-stable properties at high
temperatures.
In high temperature applications Shell Gadus S3 T150 J 2 grease will outperform even fully synthetic (PAO) lithium
complex greases proposed in the market.
Performance, Features & Benefits
· Outstanding life at high temperatures
· Excellent wear protection
· Excellent mechanical stability at high temperatures
· Excellent oxidation resistance
· Good protection against false brinnelling
· Low oil separation
· Excellent corrosion resistance
Provides protection from the elements of corrosion
· Versatile
· Water resistant
slow moving, loaded large bearings such as those found in
continuous casters in steel plants.
· Oxidation Stability
Shell Gadus S3 T150J 2 grease has a superior high
deposits. Unlike the soap thickeners used in most greases, the
diurea thickener in Shell Gadus T150J 2 grease does not
For use in steel plants using reheat furnaces requiring a zincfree formulation.
catalyse grease ocidation, indeed the diurea thickener offers
inherent anti-oxidant properties. This contributes to longer
grease life at higher temperatures.
High Temperature Performance
The diurea thickener used in Shell Gadus S3 T150J 2 grease
has a high melting point and the grease performance is limited
only by the properties of the base oil and additive
components.
· The base oil component of Shell Gadus S3 T150J 2 grease is a
specially selected high viscosity index mineral oil with excellent
oxidation and evaporation resistance.
· Sealing
The rheology of Shell Gadus S3 T150J 2 grease is such that at
· Corrosion Protection
low shear rates and with heating the consistency increases.
When a bearing is running, most high wuality greases can
maintain an adequate lubricating film even when the grease is
loaded with water. However when the grease bearing is idle
corrosion may occur causing pitting which can be destructive.
Shell Gadus S3 T150J 2 grease is formulated with corrosion
inhibitors to help protect bearing surfaces even when the
Page 1 of 2
Gadus S3 T150J 2 grease has been used very sucessfully in
withstand high operating temperatures without forming
· Zinc-free formulation
grease is contaminated with water
Although not specifically designated extreme pressue, Shell
temperature oxidation inhibitor system to ensure that they will
Withstands washing with water, preventing loss of protection.
·
· The lubrication properties of Shell Gadus S3 T150J 2 grease is
unimpaired by small quantites of salt water.
· Load carrying capacity
Consequently, in bearings operating at high temperatures the
grease remains in place providing good sealing and continuous
lubrication even in te presence of vibration.
· Water Washout
Shell Gadus S3 T150J 2 grease exhibits very good resistance to
water washout by immersion or spray.
Shell Gadus S3 T150J 2, v 1.1
20.06.2014.14.59
Main Applications
Specifications, Approvals & Recommendations
For a full listing of equipment approvals and recommendations,
please consult your local Shell Technical Help Desk.
Shell Gadus S3 T150 J 2 grease is particularly recommended
for use in high temperature (1500C), lightly loaded industrial
bearings. It is recommended for use where long operational
life and extended re-greasing intervals are an important
consideration, for example in Steel Mill applications.
Typical Physical Characteristics
Properties
Method
NLGI Consistency
Shell Gadus S3 T150J 2
2
Colour
Brown
Soap type
Diurea
Mineral Oil
Base Oil (type)
Kinematic Viscosity
Cone Penetration, worked
Dropping Point
0
2
mm /s
ASTM D445
150
0
0.1 mm
ASTM D217
265 - 295
0
IP 396
@40 C
@25 C
C
250
Fair
Pumpability, long distance
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Health, Safety & Environment
· Health and Safety
Shell Gadus S3 T150 J is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
· Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
· Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from your Shell
representative.
Additional Information
· Re-lubrication
Grease life varies considerably from application to application, even with bearings operating under nominally identical conditions.
Variables such as air flow, dirt and humidity can have a considerable effect in addition to the more commonly recognised
parameters of load, speed and temperature. The use of Shell Gadus S3 T150J 2 grease usually permits considerable extension of
the re-lubrication interval.
· Operating Temperature Range
Operating Temperature Range is from -200C to +1500C. With caution, Shell Gadus S3 T150J 2 grease may, in some
circumstances, be used at temperatures up to 1800C, but only if te re-lubrication period is suitably adjusted.
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Shell Gadus S3 T150J 2, v 1.1
20.06.2014.14.59
Technical Data Sheet
Formerly Known As: Shell Stamina Grease EP 2
• Extra Protection
• Extreme Temperature
• Polyurea
Shell Gadus S3 T220 2
Premium Multipurpose Extreme Pressure Grease
Performance, Features & Benefits
·
Proven product that has been demonstrated to work in a
range of field applications, it benefits from the wide
Cost Savings
Reduced grease consumption at high temperatures, as
grease resists melting and subsequent leakage, due to the
·
experience gained with Shell Gadus S3 T100.
Convenience
use of the latest diurea thickener technology developed by
Use of the same grease whatever the lubrication mode, as
Shell’s “in house” expertise in Japan.
Shell Gadus S3 T220 is the grease used for the automatic
Reduced maintenance costs since lower bearing
single point lubricator Shell Tactic EMV.
replacement rates can be achieved, due to the excellent
Guaranteed suitable lubrication of equipment world-wide, as
anti wear properties that are available from the latest
product is part of the International SeaShell range of
technology diurea thickened greases.
products, which can be found throughout the world.
Lower total labour costs, due to the extended lubrication
Availability wherever required, Nationally & Internationally
intervals & less downtime that results from using the latest
(Shell now markets lubricants in more than 100 countries).
in high performance greases.
Main Applications
Simplified maintenance programs can be established,
resulting from the multi purpose capabilities of this grease
·
and long service lives that are possible.
Peace of Mind
Proven new technology (not to be confused with 25 year
·
General Engineering, Steel, Paper, Aluminium, Chemical
and many others
old American polyurea greases), developed in Japan and
Recommended as an extreme pressure grease for highly
now being used by bearing manufacturers throughout the
loaded ball, roller & plain bearing applications at high
world.
temperatures where extended service life is required. Proven
The knowledge that Shell is in FULL control from Research
& Development to manufacture & quality assurance in our
own ISO approved plants, which have often been audited
and passed by quality conscious customers.
Availability of Shell expertise, to assist in safely developing
·
·
·
in the following applications:
Hot strip mills
Paper mill bearings (dry end)
Electrical motors (large)
the cost savings available from the wide range of Shell
In steel plate applications we recommend the Zn free Gadus
products.
S3 T150J.
No unexpected Product Health & Safety problems, Shell
Gadus S3 T220 is free from lead & nitrite & does not
require labelling.
Specifications, Approvals & Recommendations
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Helpdesk.
Page 1 of 2
Gadus S3 T220 2, v 2.3
11.03.2019.07.43
Typical Physical Characteristics
Properties
Method
NLGI Consistency
Shell Gadus S3 T220 2
2
Light brown
Colour
Soap Type
Diurea
Base Oil (type)
Mineral
Kinematic Viscosity
@400C
cSt
IP 71 / ASTM D445
220
Kinematic Viscosity
@1000C
cSt
IP 71 / ASTM D445
19
Cone Penetration, Worked
@250C
0.1mm
IP 50 / ASTM D217
280
0
IP 396
260
Dropping Point
C
Fair
Pumpability Long Distance
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Gadus S3 T220 Grease is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
·
Operating Temperature Range
Shell Gadus S3 T220 is recommended for use over the temperature range -250C to 1500C (higher temperatures when tested
and lubrication intervals are adjusted).
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Gadus S3 T220 2, v 2.3
11.03.2019.07.43
Technical Data Sheet
Formerly Known As: Shell Albida Grease PPS, Albida SLC220
• Heavy Duty Protection
• Water Resistant
• Lithium Complex
Shell Gadus S5 V220 2
Advanced Multipurpose Extreme Pressure Grease
Shell Gadus S5 V220 is an advanced performance grease for general transport and industrial applications. It is
based on high viscosity index synthetic base oil and a lithium complex soap thickener. It contains additives
against wear, oxidation and corrosion.
Performance, Features & Benefits
·
Main Applications
Excellent mechanical stability and water resistance
Critical properties for the function of labyrinth seals in
·
·
·
·
·
bearing housings in the wet end of a paper machine.
Corrosion protection
Shell Gadus S5 V220 is used for the grease lubrication of
Good protection against corrosion from aggressive process
bearings in both transport and industrial applications,
water.
including also both the wet and dry ends of paper machines.
Enhanced extreme-pressure properties
Specifications, Approvals & Recommendations
·
Extreme load-carrying performance.
High dropping point
ASTM D4950 LB-GC
For a full listing of equipment approvals and
Long operational life at both high and low temperatures
recommendations, please consult your local Shell Technical
Compatible with seals
Helpdesk.
Compatible with elastomers in systems designed for use
with conventional grease.
Typical Physical Characteristics
Properties
Method
NLGI Consistency
Shell Gadus S5 V220 2
2
Light Brown
Colour
Lithium complex
Soap Type
PAO
Base Oil (type)
Kinematic Viscosity
@400C
cSt
ASTM D445
220
Kinematic Viscosity
@1000C
cSt
ASTM D445
26
Four Ball Weld Load
N
DIN 51350:4
3400
Dropping Point
0
C
IP 132
260
Starting Torque
-400C
Nm
ASTM D4693
6.50
Running Torque
-400C
Nm
ASTM D4693
5.25
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Page 1 of 2
Gadus S5 V220 2, v 2.6
09.10.2018.08.59
Health, Safety & Environment
·
Health and Safety
Shell Gadus S5 V220 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
·
Re-greasing Intervals
For bearings operating near their maximum recommended temperatures, re-greasing intervals should be reviewed.
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Gadus S5 V220 2, v 2.6
09.10.2018.08.59
Table of Content
No. Product Name
1.
Morlina S2 B 150
2.
Morlina S2 B 220
3.
Morlina S2 BA 100
4.
Morlina S2 BL 10
Technical Data Sheet
Formerly Known As: Shell Morlina Oils
• Reliable Protection
• Industrial Application
• Water Shedding
Shell Morlina S2 B 150
Industrial Bearing & Circulating Oils
Shell Morlina S2 B oils are high performance oils designed to provide outstanding oxidation and water separation
protection for most general industrial bearing and circulating oil system applications and certain other industrial
applications which do not require oils with extreme pressure (EP) properties. These oils meet the requirements
of the Morgan Construction Company and Danieli for common bearing oils.
·
·
Performance, Features & Benefits
·
Long oil life – Maintenance saving
Suitable for most plain and rolling element bearings and
rust and oxidation inhibitor additive package that helps
general industrial applications.
the maintenance interval.
Reliable wear & corrosion protection
·
·
Roll-neck bearings
Enclosed industrial gear systems
Low or moderately loaded enclosed gears where EP
Shell Morlina S2 B oils help prolong the life of bearings and
circulating systems through:
- Excellent water separation characteristics that helps
ensure that critical oil films are retained between highly
loaded parts.
- Good air release characteristics to minimize cavitation
and associated damage to circulating pumps.
- Helps protect against corrosion, oxidation, and emulsion
·
Oil lubricated bearings
Shell Morlina S2 B oils are formulated with a well proven
provide consistent performance and protection throughout
·
Machine circulation systems
formation, even in the presence of water.
·
performance is not required.
Cylinder Lubrication for reciprocating Gas Compressors
Specifications, Approvals & Recommendations
·
·
·
·
Danieli Standard 6.124249.F
DIN 51517-1 C
DIN 51517-2 CL
Morgan MORGOIL® Lubricant Specification New Oil (Rev.
1.1) (MORGOIL is a registered trademark of the Morgan
Maintaining system efficiency
Construction Company)
Shell Morlina S2 B oils are blended with high quality,
For a full listing of equipment approvals and
solvent refined base oils that promote good water
recommendations, please consult your local Shell Technical
separation and air release to ensure the efficient lubrication
Helpdesk.
of the machines and systems.
Compatibility & Miscibility
Main Applications
·
Paint Compatibility
Shell Morlina S2 B oils are compatible with seal materials
and paints normally specified for use with mineral oils.
Page 1 of 4
Morlina S2 B 150, v 2.3
14.02.2019.11.28
Typical Physical Characteristics
Properties
Method
ISO 3448
ISO Viscosity Grade
Shell Morlina S2 B 150
150
Kinematic Viscosity
@400C
mm2/s
ASTM D445
150
Kinematic Viscosity
@1000C
mm2/s
ASTM D445
15
Density
@150C
kg/m3
ISO 12185
887
ISO 2909
95
Viscosity Index
Flash Point (COC)
0
ISO 2592
262
Pour Point
0
ISO 3016
-15
C
C
Rust, Distilled Water
ASTM D665A
Pass
Emulsion Test - @820C (Unless specified by *)
Mins
ASTM D1401
20
Oxidation Control Test : TOST
Hrs
ASTM D943
1 300+
Oxidation Control Test : RPVOT
Mins
ASTM D2272
200+
Foam Test, Seq II
ml foam at 0/10
mins
ASTM D892
10/0
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur. *@540C
Health, Safety & Environment
·
Health and Safety
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 4
Morlina S2 B 150, v 2.3
14.02.2019.11.28
Technical Data Sheet
Formerly Known As: Shell Morlina Oils
• Reliable Protection
• Industrial Application
• Water Shedding
Shell Morlina S2 B 220
Industrial Bearing & Circulating Oils
Shell Morlina S2 B oils are high performance oils designed to provide outstanding oxidation and water separation
protection for most general industrial bearing and circulating oil system applications and certain other industrial
applications which do not require oils with extreme pressure (EP) properties. These oils meet the requirements
of the Morgan Construction Company and Danieli for common bearing oils.
·
·
Performance, Features & Benefits
·
Long oil life – Maintenance saving
Suitable for most plain and rolling element bearings and
rust and oxidation inhibitor additive package that helps
general industrial applications.
the maintenance interval.
Reliable wear & corrosion protection
·
·
Roll-neck bearings
Enclosed industrial gear systems
Low or moderately loaded enclosed gears where EP
Shell Morlina S2 B oils help prolong the life of bearings and
circulating systems through:
- Excellent water separation characteristics that helps
ensure that critical oil films are retained between highly
loaded parts.
- Good air release characteristics to minimize cavitation
and associated damage to circulating pumps.
- Helps protect against corrosion, oxidation, and emulsion
·
Oil lubricated bearings
Shell Morlina S2 B oils are formulated with a well proven
provide consistent performance and protection throughout
·
Machine circulation systems
formation, even in the presence of water.
·
performance is not required.
Cylinder Lubrication for reciprocating Gas Compressors
Specifications, Approvals & Recommendations
·
·
·
·
Danieli Standard 6.124249.F
DIN 51517-1 C
DIN 51517-2 CL
Morgan MORGOIL® Lubricant Specification New Oil (Rev.
1.1) (MORGOIL is a registered trademark of the Morgan
Maintaining system efficiency
Construction Company)
Shell Morlina S2 B oils are blended with high quality,
For a full listing of equipment approvals and
solvent refined base oils that promote good water
recommendations, please consult your local Shell Technical
separation and air release to ensure the efficient lubrication
Helpdesk.
of the machines and systems.
Compatibility & Miscibility
Main Applications
·
Paint Compatibility
Shell Morlina S2 B oils are compatible with seal materials
and paints normally specified for use with mineral oils.
Page 1 of 4
Morlina S2 B 220, v 2.3
14.02.2019.11.40
Typical Physical Characteristics
Properties
Method
ISO 3448
ISO Viscosity Grade
Shell Morlina S2 B 220
220
Kinematic Viscosity
@400C
mm2/s
ASTM D445
220
Kinematic Viscosity
@1000C
mm2/s
ASTM D445
18.3
Density
@150C
kg/m3
ISO 12185
891
ISO 2909
92
Viscosity Index
Flash Point (COC)
0
ISO 2592
280
Pour Point
0
ISO 3016
-15
C
C
Rust, Distilled Water
ASTM D665A
Pass
Emulsion Test - @820C (Unless specified by *)
Mins
ASTM D1401
20
Oxidation Control Test : TOST
Hrs
ASTM D943
1 300+
Oxidation Control Test : RPVOT
Mins
ASTM D2272
200+
Foam Test, Seq II
ml foam at 0/10
mins
ASTM D892
10/0
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur. *@540C
Health, Safety & Environment
·
Health and Safety
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 4
Morlina S2 B 220, v 2.3
14.02.2019.11.40
Technical Data Sheet
Previous Name: Shell Morlina T
• Reliable Protection
• Industrial Applications
• Extra Water Shedding
Shell Morlina S2 BA 100
Special Application Bearing & Circulating Oils
Shell Morlina S2 BA Oils are High Performance Oils Designed to Provide Outstanding Protection for Most Challenging
Industrial Bearing and Circulating Applications Such as Those Found in Morgan No-Twist Mill Systems. Meets the
Requirements of Oems Such as Morgan and Danieli.
· Morgan No-Twist® Systems
Performance, Features & Benefits
· Good oil Life – Maintenance Saving
Shell Morlina S2 BA Oils Meet the Demanding Requirements for
Shell Morlina S2 BA Oils are Formulated With a Well Proven
the Lubrication of Morgan No-Twist Mill Systems Where a
Rust and Oxidation Inhibitor Package That Helps Provide
Single Lubricant (ISO 100 or Above) is Required to Protect the
Consistent Performance and Protection Throughout the
Highly Loaded Roller and Plain Bearings Working at High
Maintenance Interval.
Speeds and to Work Satisfactorily Even When Contaminated
With Cooling Water and Iron Oxides Coming From the Mill.
· Reliable Wear & Corrosion Protection
Shell Morlina S2 BA Oils Help Prolong the Life of Bearings
· General Industrial Bearing and Circulating Systems
Shell Morlina S2 BA Oils are Also Suitable for use in Many
and Circulating Systems Through:
- Enhanced Water Separation characteristics That Help Ensure
Critical oil Films are Retained Between Highly Loaded Parts in
Heavily Contaminated Environments
- Good air Release characteristics to Minimize Cavitation and
General Industrial Lubrication Systems Were an Anti-Wear
Lubricant With Mild EP Properties are Required.
· Enclosed Industrial Gear Systems
Low or Moderately Loaded Enclosed Gears Where Mild EP
Performance is Sufficient.
Associated Damage to Circulating Pumps
- Helps Protect Against Corrosion Oxidation, and Emulsion
Specifications, Approvals & Recommendations
Formation, Even in the Presence of Water
· Morgan Morgoil® Lubricant Specification New Oil (Rev. 1.1)
- Reduces Wear of Bearings During Mill Operation
· Maintaining System Efficiency
(Morgoil and Morgan No-Twist Mill are Registered Trademarks
of the Morgan Construction Company)
· Morgan No-Twist® Mill (Spec Mmc40003)
Solvent Refined Base Oils That Promote Good Water
· Danieli Standard 0.000.001, Revision 14
Separation and air Release to Ensure the Efficient Lubrication
· SEB 181-225 Specification
of the Machines and Systems.
· DIN 51517-1 – Type C
Shell Morlina S2 BA Oils are Also Suitable for use With Fine
DIN 51517-2 – Type CL
Filtration to Help Ensure Effective Contaminant Free Lubrication ·
Shell Morlina S2 BA Oils are Blended With High Quality,
to Critical Machine Parts.
For a Full Listing of Equipment Approvals and
Recommendations, Please Consult Your Local Shell Technical
Main Applications
Helpdesk, or the OEM Approvals Website.
Compatibility & Miscibility
· Paint Compatibility
Shell Morlina S2 BA Oils are Compatible With Seal Materials
and Paints Normally Specified for use With Mineral Oils.
Page 1 of 3
Shell Morlina S2 BA 100, v 2
08-Oct-2012 09:06
Typical physical characteristics
Properties
Method
ISO 3448
ISO Viscosity Grade
Morlina S2 BA 100
100
Kinematic Viscosity
@40°C
mm²/s
ASTM D 445
100
Kinematic Viscosity
@100°C
mm²/s
ASTM D 445
11.1
Density
@15°C
kg/m³
ISO 12185
880
ISO 2909
96
Viscosity Index
Flash Point (COC)
°C
ISO 2592
>240
Pour Point
°C
ISO 3016
-15
ASTM D 665B
Pass
ASTM D 1401
10
ASTM D 1582
12 Pass
Rust, Salt Water
Emulsion Test
Mins
FZG Load Stage
Load Wear Index
kgf
ASTM D 2783
33
Weld Point
kgf
ASTM D 2783
160
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in these characteristics
may occur.
Health, Safety & Environment
· Guidance on Health and Safety is Available on the Appropriate Material Safety Data Sheet, Which can be Obtained From
http://www.epc.Shell.com/
· Protect the Environment
Take Used oil to an Authorised Collection point. Do not Discharge Into Drains, Soil or Water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your local shell representative.
Page 2 of 3
Shell Morlina S2 BA 100, v 2
08-Oct-2012 09:06
Page 3 of 3
Shell Morlina S2 BA 100, v 2
08-Oct-2012 09:06
Technical Data Sheet
Previous Name: Shell Morlina 10, Shell Morlina HS 10
• Reliable Protection
• High Speed Applications
Shell Morlina S2 BL 10
Special Application Bearing & Circulating Oils
Shell Morlina S2 BL oils are special low viscosity, solvent refined mineral oil blended with zinc free additives, to
provide extended performance in the high speed spindles of machine tools.
Performance, Features & Benefits
·
Main Applications
Long oil life – Maintenance saving
Shell Morlina S2 BL oils are formulated with a well proven
rust and oxidation inhibitor package that provides high
resistance to oxidation, caused by heat in the presence of
·
Machine bearing and circulating systems
air, water and metal catalysts, such as copper, and helps to
Suitable for a range of machine lubrication systems that
prolong oil life and lower maintenance costs.
include oil lubricated plain and rolling element bearings.
·
Reliable wear & corrosion protection
High speed spindles
The special additives provide efficient anti-wear
The low viscosity fluids (ISO grades 2, 5 and 10) are
performance without reacting to the softer metals in
particularly suitable for the lubrication of high speed spindles
bearings and enhance machine reliability.
in machine tools.
In addition the additive package enhances the oil’s natural
corrosion protective properties and helps to prolong bearing
·
·
life.
Maintaining system efficiency
The low viscosity components of these oils have been
chosen to help promote the smooth running of high speed
machine elements and minimize heat build up through
Specifications, Approvals & Recommendations
·
·
Fives Cincinnati P-65 (ISO VG 2)
Fives Cincinnati P-62 (ISO VG 5, 10)
Shell Morlina S2 BL oils are designed to meet specifications
requiring a premium quality, light viscosity oil for applications
running at high speeds such as those found in high speed
frames and automated machine tools.
frictional energy losses.
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Helpdesk.
Typical Physical Characteristics
Properties
Kinematic Viscosity
@400C
mm2/s
Method
ASTM D445
Morlina S2 BL 10
10
Kinematic Viscosity
@1000C
mm2/s
ASTM D445
2.3
kg/m
ISO 12185
881
Flash Point (COC)
0
ASTM D92
150
Pour Point
0
ISO 3016
-30
Density
0
@15 C
3
C
C
Rust, Salt Water
ASTM D665B
Pass
Oxidation Control Test : TOST
Hrs
ASTM D943
2000+
Oxidation Control Test : RPVOT
Mins
ASTM D2272
300
Page 1 of 2
Morlina S2 BL 10, v 1.4
25.05.2016.08.21
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health & Safety
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Morlina S2 BL 10, v 1.4
25.05.2016.08.21
Table of Content
No. Product Name
1.
Turbo T 32
2.
Turbo T 46
3.
Turbo T 68
4.
Turbo J 32
5.
Turbo S4 GX 32
6.
Turbo S4 GX46
7.
Turbo S5 DR46
Technical Data Sheet
Shell Turbo Oil T 32
High Quality Industrial Steam & Gas Turbine Oils
Shell Turbo Oils T have long been regarded as the industry standard turbine oil. Building on this reputation, Shell
Turbo Oils T have been developed to offer improved performance capable of meeting the demands of the most
modern steam turbine systems and light duty gas turbines, which require no enhanced anti-wear performance for
the gearbox. Shell Turbo Oils T are formulated from high quality hydrotreated base oils and a combination of
zinc-free additives that provide excellent oxidative stability, protection against rust & corrosion, low foaming and
excellent demulsibility.
Performance, Features & Benefits
·
Strong Control of Oxidation
The use of inherently oxidatively stable base oils together
with an effective inhibitor package provides high resistance
·
·
·
to oxidative degradation. The result is extended oil life,
minimising the formation of aggressive corrosive acids,
·
deposits and sludge, reducing your operating costs.
High Resistance to Foaming and Rapid Air Release
The oils are formulated with an anti-foam additive, which
generally controls foam formation. This feature coupled
with fast air-release from the lubricant reduces the
possibility of problems such as pump cavitation, excessive
wear and premature oil oxidation, giving you increased
·
system reliability.
Positive Water-Shedding Properties
Robust demulsibility control such that excess water,
common-place in steam turbines, can be drained easily
from the lubrication system, minimising corrosion and
premature wear, lowering the risk of unplanned
·
maintenance.
Excellent Rust & Corrosion Protection
Prevents the formation of rust and guards against onset of
corrosion ensuring protection for equipment following
exposure to humidity or water during operation and during
shut-downs, minimising maintenance.
Main Applications
Shell Turbo Oils T are available in ISO grades 32, 46, 68 &
100 and are suited for application in the following areas:
·
Industrial steam turbines & light duty gas turbines requiring
Hydroelectric turbine lubrication.
Numerous applications where strong control over rust and
oxidation is required.
Centrifugal and axial, dynamic turbo-compressors and
pumps where an R&O type or turbine oil is recommended.
Specifications, Approvals & Recommendations
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
Siemens Power Generation TLV 9013 04 & TLV 9013 05
Alstom HTGD 90117 V 0001 AA
Man Turbo SP 079984 D0000 E99
Fives Cincinnati, LLC (formally Cincinnati Machine): P-38
General Electric GEK 28143b, GEK 32568K, GEK 46506e
and GEK 120498
Siemens - Westinghouse 21T0591 & PD-55125Z3
DIN 51515-1 L-TD, 51515-2 L-TG, 51524-1 HL
ISO 8068:2006 - L-TGA, 8068:2006 - L-TSA
Solar ES 9-224Y Class II
GEC Alstom NBA P50001A
JIS K 2213:2006 Type 2
ASTM D4304-13 Type I & III
GB 11120-2011, L-TSA and L-TGA
Indian Standard IS 1012:2002
Skoda Technical Properties Tp 0010P/97 use in steam
turbines.
Alstom Power Hydro Generators (spec HTWT600050)
Dresser Rand (spec 003-406-001)
Siemens Turbo Compressors (spec 800 037 98)
no enhanced anti-wear performance for the gearbox.
Page 1 of 2
Turbo T 32, v 6.9
21.08.2017.11.32
·
·
GE Oil and Gas – Appropriate Specification listed under
document ITN52220.04
For special applications such as Ammonia or High Sulphur
Syngas compressors with wet gas seals, please contact
your local technical expert.
For a full listing of equipment approvals and
recommendations, please consult your local Shell
Technical Helpdesk.
Typical Physical Characteristics
Properties
Viscosity
@400C
cSt
Method
ASTM D445
Shell Turbo T 32
32.0
Viscosity
@1000C
cSt
ASTM D445
5.45
ASTM D2270
105
ASTM D1500
L 0.5
kg/m
ASTM D4052
840
Pour Point
0
ASTM D97
-33
Flash Point (COC)
0
C minimum
ASTM D92
215
mg KOH/g
ASTM D974
0.10
minutes
ASTM D3427
4
Water Demulsibility
minutes
ASTM D1401
15
Steam Demulsibility
seconds
DIN 51589
150
ASTM D665B
Pass
Viscosity Index
Colour
Density
0
@15 C
C maximum
Total Acid Number
Air Release, Minutes
3
0
@50 C
Rust Control
Oxidation Control Test - TOST Life
hours
ASTM D943
10,000+
Oxidation Control Test - RPVOT
minutes minimum
ASTM D2272
950
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Turbo T 32 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Turbo T 32, v 6.9
21.08.2017.11.32
Technical Data Sheet
Shell Turbo Oil T 46
High Quality Industrial Steam & Gas Turbine Oils
Shell Turbo Oils T have long been regarded as the industry standard turbine oil. Building on this reputation, Shell
Turbo Oils T have been developed to offer improved performance capable of meeting the demands of the most
modern steam turbine systems and light duty gas turbines, which require no enhanced anti-wear performance for
the gearbox. Shell Turbo Oils T are formulated from high quality hydrotreated base oils and a combination of
zinc-free additives that provide excellent oxidative stability, protection against rust & corrosion, low foaming and
excellent demulsibility.
Performance, Features & Benefits
·
Strong Control of Oxidation
The use of inherently oxidatively stable base oils together
with an effective inhibitor package provides high resistance
·
·
·
to oxidative degradation. The result is extended oil life,
minimising the formation of aggressive corrosive acids,
·
deposits and sludge, reducing your operating costs.
High Resistance to Foaming and Rapid Air Release
The oils are formulated with an anti-foam additive, which
generally controls foam formation. This feature coupled
with fast air-release from the lubricant reduces the
possibility of problems such as pump cavitation, excessive
wear and premature oil oxidation, giving you increased
·
system reliability.
Positive Water-Shedding Properties
Robust demulsibility control such that excess water,
common-place in steam turbines, can be drained easily
from the lubrication system, minimising corrosion and
premature wear, lowering the risk of unplanned
·
maintenance.
Excellent Rust & Corrosion Protection
Prevents the formation of rust and guards against onset of
corrosion ensuring protection for equipment following
exposure to humidity or water during operation and during
shut-downs, minimising maintenance.
Main Applications
Shell Turbo Oils T are available in ISO grades 32, 46, 68 &
100 suited for application in the following areas:
·
Industrial steam turbines & light duty gas turbines requiring
Hydroelectric turbine lubrication.
Numerous applications where strong control over rust and
oxidation is required.
Centrifugal and axial, dynamic turbo-compressors and
pumps where an R&O type or turbine oil is recommended.
Specifications, Approvals & Recommendations
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
Siemens Power Generation TLV 9013 04 & TLV 9013 05
Alstom HTGD 90117 V 0001 AA
Man Turbo SP 079984 D0000 E99
Fives Cincinnati, LLC (formaly Cincinnati Machine): P-55
General Electric GEK 28143b, GEK 117064
DIN 51515-1 L-TD, 51515-2 L-TG, 51524-1 HL
ISO 8068:2006 - L-TGA, 8068:2006 - L-TSA
Solar ES 9-224Y Class II
GEC Alsthom NBA P50001A
JIS K 2213: 2006 Type 2
ASTM D4304-13 Type I & III
GB11120, L-TSA and L-TGA
Indian Standard IS 1012:2002
Skoda Technical Properties Tp 0010P/97 use in steam
engines.
Alstom Power Hydro Generators (spec HTWT600050)
Dresser Rand (spec 003-406-001)
Andritz Hydro
Siemens Turbo Compressors (spec 800 037 98)
MAN D&T SE TED 10000494596
no enhanced anti-wear performance for the gearbox.
Page 1 of 2
Turbo T 46, v 2.8
21.08.2017.11.40
·
·
·
GE Oil and Gas – Appropriate Specification listed under
document ITN52220.04
ANSALDO TGO2-0171-E00000/B
For special applications such as Ammonia or High Sulphur
Syngas compressors with wet gas seals, please contact
your local technical expert.
For a full listing of equipment approvals and
recommendations, please consult your local Shell
Technical Helpdesk.
Typical Physical Characteristics
Properties
Viscosity
@400C
cSt
Method
ASTM D445
Shell Turbo Oil T 46
46.0
Viscosity
@1000C
cSt
ASTM D445
6.90
ASTM D2270
105
ASTM D1500
L 0.5
kg/m
ASTM D4052
858
Pour Point
0
ASTM D97
-27
Flash Point (COC)
0
C minimum
ASTM D92
220
mg KOH/g
ASTM D974
0.10
minutes
ASTM D3427
4
Water Demulsibility
minutes
ASTM D1401
15
Steam Demulsibility
seconds
DIN 51589
153
ASTM D665B
Pass
Viscosity Index
Colour
Density
0
@15 C
C maximum
Total Acid Number
Air Release, Minutes
3
0
@50 C
Rust Control
Oxidation Control Test - TOST Life
hours
ASTM D943
10,000+
Oxidation Control Test - RPVOT - minutes
minutes minimum
ASTM D2272
950
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Turbo Oil T 46 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Turbo T 46, v 2.8
21.08.2017.11.40
Technical Data Sheet
Shell Turbo Oil T 68
High Quality Industrial Steam & Gas Turbine Oils
Shell Turbo Oils T have long been regarded as the industry standard turbine oil. Building on this reputation, Shell
Turbo Oils T have been developed to offer improved performance capable of meeting the demands of the most
modern steam turbine systems and light duty gas turbines, which require no enhanced anti-wear performance for
the gearbox. Shell Turbo Oils T are formulated from high quality hydrotreated base oils and a combination of
zinc-free additives that provide excellent oxidative stability, protection against rust & corrosion, low foaming and
excellent demulsibility.
Performance, Features & Benefits
·
Strong Control of Oxidation
The use of inherently oxidatively stable base oils together
with an effective inhibitor package provides high resistance
to oxidative degradation. The result is extended oil life,
minimising the formation of aggressive corrosive acids,
·
deposits and sludge, reducing your operating costs.
with fast air-release from the lubricant reduces the
possibility of problems such as pump cavitation, excessive
wear and premature oil oxidation, giving you increased
system reliability.
Positive Water-Shedding Properties
Robust demulsibility control such that excess water,
common-place in steam turbines, can be drained easily
from the lubrication system, minimising corrosion and
premature wear, lowering the risk of unplanned
maintenance.
Excellent Rust & Corrosion Protection
Prevents the formation of rust and guards against onset of
corrosion ensuring protection for equipment following
exposure to humidity or water during operation and during
shut-downs, minimising maintenance.
Hydroelectric turbine lubrication.
Numerous applications where strong control over rust and
oxidation is required.
Centrifugal and axial, dynamic turbo-compressors and
·
·
·
·
·
·
·
·
·
·
·
·
·
Alstom HTGD 90 117 V0001 Z
Fives Cincinnati, LLC (formally Cincinnati Machine): P-54
Man Turbo SP 079984 D0000 E99
General Electric GEK 28143b
DIN 51515-1 L-TD, 51524-1 HL
ISO 8068:2006 - L-TGA, 8068:2006 - L-THA, 8068:2006 - LTSA
JIS K 2213: 2006 Type 2
ASTM D4304-13 Type I
GB11120-2011, L-TSA and L-TGA
Indian Standard IS 1012:2002
Andritz Hydro
Siemens Turbo Compressors (spec 800 037 98)
For special applications such as Ammonia or High Sulphur
Syngas compressors with wet gas seals, please contact your
local technical expert.
Main Applications
Shell Turbo Oils T are available in ISO grades 32, 46, 68 &
100 suited for application in the following areas:
require no enhanced anti-wear performance for the gearbox.
Specifications, Approvals & Recommendations
generally controls foam formation. This feature coupled
·
Industrial steam turbines & light duty gas turbines which
pumps where an R&O type or turbine oil is recommended.
High Resistance to Foaming and Rapid Air Release
The oils are formulated with an anti-foam additive, which
·
·
·
·
·
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Helpdesk.
Page 1 of 2
Turbo T 68, v 2.2
21.08.2017.12.04
Typical Physical Characteristics
Properties
cSt
Method
ASTM D445
Shell Turbo Oil T 68
68.0
cSt
ASTM D445
8.95
Viscosity index
ASTM D2270
105
Colour
ASTM D1500
L 0.5
kg/m3
ASTM D4052
871
Pour Point
0
ASTM D97
-24
Flash Point (COC)
0
C minimum
ASTM D92
240
Total Acid Number
mg KOH/g
ASTM D974
0.10
minutes
ASTM D3427
5
minutes
ASTM D1401
20
ASTM D665B
Pass
Viscosity
Viscosity
Density
Air Release, Minutes
0
@40 C
0
@100 C
@150C
C maximum
@500C
Water Demulsibility
Rust Control
Oxidation Control Test - TOST Life
hours
ASTM D943
7,000+
Oxidation Control Test - RPVOT - minutes
minutes
ASTM D2272
600
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Turbo T 68 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Turbo T 68, v 2.2
21.08.2017.12.04
Technical Data Sheet
Shell Turbo Oil J 32
Premium Industrial Turbine Oil
Shell Turbo Oil J has been specially formulated to satisfy the demanding requirements of the MHI (Mitsubishi
Heavy Industry) non-geared steam & gas turbines.
This is based on a blend of specially chosen high quality hydrotreated base oils with selected additives to
enhance their rust and oxidation properties.
Performance, Features & Benefits
·
·
·
·
·
Main Applications
·
Good thermal and oxidation stability
Power generation MHI turbines
Resists the formation of sludge and other harmful products
Shell Turbo Oil J may also be used for other industrial
of oxidation, giving long oil life.
applications requiring high quality rust and oxidation (R & O)
Excellent corrosion protection
inhibited oils, which separate easily from water.
High level of corrosion protection of all metal surfaces.
Specifications, Approvals & Recommendations
·
Excellent oil/water separation properties
Easy drainage of excess water from lubrication systems.
Shell Turbo Oil J is approved by MHI against their
specifications Turbine Oil Type 2 (additive) MS04-MA-CL001
Good air release characteristics
(R-2) and MS04-MA-CL002 (R-2).
Effective air release without excessive foaming.
For a full listing of equipment approvals and
Reliable performance in MHI turbines
recommendations, please consult your local Shell Technical
Shell Turbo Oil J meets the requirements of MHI turbines
Helpdesk.
and has been successfully tested in the MHI in-house dry
TOST test.
Typical Physical Characteristics
Properties
Viscosity
@400C
cSt
Method
ASTM D445
Shell Turbo J 32
32
Viscosity
@1000C
cSt
ASTM D445
5.3
ASTM D2270
104
ASTM D1500
L 0.5
kg/m
ASTM D4052
858
Pour Point
0
C
ASTM D97
-18
Total Acid Number
mg KOH/g
ASTM D974
0.05
Foaming Seq I
ml/ml
ASTM D892
30/Nil
Foaming Seq II
ml/ml
ASTM D892
20/Nil
ml/ml
ASTM D892
30/Nil
minutes
ASTM D1401
40-40-0(10)
ASTM D3427
<4
ASTM D130
1b
Viscosity Index
Colour
Density
0
3
@15 C
Foaming Seq III
Water Separability
0
@54 C
Air Release, Minutes
Copper Corrosion (3 hrs)
0
@100 C
Rust Control
Oxidation Control Test - TOST Life
hour
Oxidation Control Test - Dry TOST
Page 1 of 2
Turbo Oil J 32, v 1.3
ASTM D665B
Pass
ASTM D943
>8000
MHI Method
Pass
11.03.2019.08.33
Properties
Oxidation Control Test - RPVOT - minutes
minutes
Flash Point (COC)
0
C
Method
ASTM D2272
ASTM D92
Shell Turbo J 32
>950
222
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
·
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Turbo Oil J 32, v 1.3
11.03.2019.08.33
Technical Data Sheet
• Extra long oil life
• Enhanced wear protection
Shell Turbo S4 GX 32
Premium based industrial steam, gas and combined cycle turbine lubricant for geared turbines
Shell Turbo S4 GX 32 is based on Gas-to-Liquid (GTL) technology and has been developed to meet the
demands of the latest high efficiency turbine systems. Designed to offer outstanding, long term performance
under the most severe operating conditions Shell Turbo S4 GX 32 will minimise wear, deposit and sludge
formation even under cyclic peak loading conditions.
·
Performance, Features & Benefits
·
Extended oil life
Shell Turbo S4 GX 32 is used as the lubricating oil of choice
Shell Turbo S4 GX 32 delivers exceptional resistance to
in modern steam, gas and combined cycle turbines,
degradation, even under conditions of high oxidative and
especially those needing enhanced anti-wear performance
thermal stress. Excellent results in both the ASTM dry
to protect highly loaded gearboxes.
TOST and the TOST life test (ASTM D943) demonstrate
·
·
Further industrial applications
the potential for Shell Turbo S4 GX 32 to offer extended
Shell Turbo S4 GX 32 may also be used for other industrial
service life, reduced maintenance costs and less downtime
applications requiring a high performance gas turbine oil,
when compared to conventional mineral oil technology.
such as the lubrication of turbo compressors
Enhanced Equipment protection
Specifications, Approvals & Recommendations
The excellent prevention of deposit formation provided by
Shell Turbo S4 GX 32 meets & exceeds international
Shell Turbo S4 GX 32 enables it to lubricate the hottest gas
specification and requirements of the major turbine
turbine bearings with minimal deposit build up or sludge
formation. This reduces the potential for critical component
failure and the risk of unplanned turbine shutdown.
As the pressure increases on gearboxes in turbines it is
critical for an oil to provide greater anti-wear protection.
Shell Turbo S4 GX 32 offers enhanced anti-wear protection
for heavily loaded gear boxes helping end users maintain
optimum operating conditions under challenging situations
·
Power and industrial steam, gas & combined cycle turbines
without sacrificing resistance to deposits or oil life.
Enhanced System Efficiency
Demulsibility, air release, resistance to foaming, and filter
blockage are critical factors for oil in the latest geared
turbine designs (especially turbines which have shorter oil
residence times). Shell Turbo S4 GX 32 offers excellent
performance in all four areas, ensuring that optimum
operating conditions are maintained.
Main Applications
·
·
·
·
·
·
·
·
·
·
·
·
·
manufacturers including:
ASTM 4304-13 Type I, II & III
GB (China) 11120-2011, L-TSE, L-TGE and L-TGSE
DIN 51515 Part 1 L-TDP & Part 2 L-TGP, 51524-2-HLP
JIS K 2213:2006 Type 2
ISO 8068:2006 L-TGF, 8068:2006 L-TGSE
Shell Turbo S4 GX is approved by Siemens Power
Generation, spec TLV 9013 04 and TLV 9013 05
General Electric GEK 32568K, 46506e, 28143b, 101941a,
107395a and 120498
Alstom HTGD 90117 V 0001 AA
Dresser Rand 003-406-001 Type I and III
Westinghouse 21 TO591 and 55125Z3 and Eng
Spec_DP21T-00000443
Solar ES 9-224Y Class II
MAN D&T SE TED 10000494596
Shell Turbo S4 GX 32 meets the specification of Elliott
Turbo-machinery X-18-0004
Page 1 of 3
Turbo S4 GX 32, v 7.6
20.09.2017.07.15
·
Shell Turbo S4 GX meets Siemens Turbo-machinery
specifications 1CW0047915, WN80003798, and report
·
·
·
·
65/0027
Shell Turbo S4 GX meets Siemens Finspong MAT812109
GE Oil and Gas – Appropriate Specification listed under
document ITN52220.04
ANSALDO TGO2-0171-E00000/B
Shell Turbo S4 GX 32 has been classified as a low
varnishing type turbine oil by GE Oil & Gas against the
specifications listed under document ITN52220.04
For a full listing of equipment approvals and
recommendations, please consult your local Shell
Technical Helpdesk.
Typical Physical Characteristics
Properties
Method
ISO 3448
ISO Viscosity Grade
Shell Turbo S4 GX 32
32
Kinematic Viscosity
@400C
mm2/s
ASTM D445
32.0
Kinematic Viscosity
@1000C
mm2/s
ASTM D445
6.06
ASTM D2270
139
Viscosity Index
g/cm3
IP 365
Flash Point (COC)
0
ASTM D92
232
Pour Point
0
C
ASTM D97
-42
Neutralisation Number
mg KOH/g
ASTM D974
0.15
minutes
ASTM D3427
1
ASTM D130
1b
Density
@150C
C
Air Release
@500C
Copper Corrosion
3hr/1000C
ASTM D665 A & B
Rust Preventing Properties
Water Separability
Foaming Characteristics
tendency,
stability
No Rust
ASTM D1401
15
seconds
IP 19
95
mL/mL
ASTM D892
minutes to 3 mL minutes
emulsion
Steam Demulsibility
0.827
Sequence I
0/0
Sequence II
0/0
Sequence III
0/0
DIN 51354
Load Carrying - FZG - failure load stage
10
Oxidation Stability
ASTM D2272
1400
RPVOT
minutes
Modified RPVOT
% of RPVOT
TOST lifetime
hours
ASTM D943
10 000+
TOST 1000hr sludge
mg/kg
ASTM D4310
25
Dry TOST
95%
ASTM D7873
@1200C
Sludge Content at 50% RPVOT
mg/kg
25
Time to 50% RPVOT
hours
1410
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Page 2 of 3
Turbo S4 GX 32, v 7.6
20.09.2017.07.15
Health, Safety & Environment
·
Health and Safety
Shell Turbo S4 GX 32 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet (MSDS), which can be obtained
·
from www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 3 of 3
Turbo S4 GX 32, v 7.6
20.09.2017.07.15
Technical Data Sheet
• Extra long oil life
• Enhanced wear protection
Shell Turbo S4 GX 46
Premium based industrial steam, gas and combined cycle turbine lubricant for geared turbines
Shell Turbo S4 GX 46 is based on Gas-to-Liquid (GTL) technology and has been developed to meet the
demands of the latest high efficiency turbine systems. Designed to offer outstanding, long term performance
under the most severe operating conditions Shell Turbo S4 GX 46 will minimise wear, deposit and sludge
formation even under cyclic peak loading conditions.
·
Performance, Features & Benefits
·
Extended oil life
Shell Turbo S4 GX 46 is used as the lubricating oil of choice
Shell Turbo S4 GX 46 delivers exceptional resistance to
in modern steam, gas and combined cycle turbines,
degradation, even under conditions of high oxidative and
especially those needing enhanced anti-wear performance
thermal stress. Excellent results in both the ASTM dry
to protect highly loaded gearboxes.
TOST and the TOST life test (ASTM D943) demonstrate
·
·
Shell Turbo S4 GX 46 may also be used for other industrial
service life, reduced maintenance costs and less downtime
applications requiring a high performance gas turbine oil,
when compared to conventional mineral oil technology.
such as the lubrication of turbo compressors
Enhanced Equipment protection
Specifications, Approvals & Recommendations
Shell Turbo S4 GX 46 meets & exceeds international
Shell Turbo S4 GX 46 enables it to lubricate the hottest gas
specification and requirements of the major turbine
turbine bearings with minimal deposit build up or sludge
formation. This reduces the potential for critical component
failure and the risk of unplanned turbine shutdown.
As the pressure increases on gearboxes in turbines it is
critical for an oil to provide greater anti-wear protection.
Shell Turbo S4 GX 46 offers enhanced anti-wear protection
for heavily loaded gear boxes helping end users maintain
optimum operating conditions under challenging situations
·
Further industrial applications
the potential for Shell Turbo S4 GX 46 to offer extended
The excellent prevention of deposit formation provided by
·
Power and industrial steam, gas & combined cycle turbines
without sacrificing resistance to deposits or oil life.
Enhanced System Efficiency
Demulsibility, air release, resistance to foaming, and filter
blockage are critical factors for oil in the latest geared
turbine designs (especially turbines which have shorter oil
residence times). Shell Turbo S4 GX 46 offers excellent
performance in all four areas, ensuring that optimum
operating conditions are maintained.
·
·
·
·
·
·
·
·
·
·
·
·
ASTM 4304-13 Type I, II & III
GB (China) 11120-2011, L-TSE, L-TGE and L-TGSE
DIN 51515 Part 1 L-TDP & Part 2 L-TGP, 51524-2 HLP
JIS K 2213:2006 Type 2
ISO 8068:2006 L-TGF, ISO 8068:2006 L-TGSE
Shell Turbo S4 GX is approved by Siemens Power
Generation, spec TLV 9013 04 and TLV 9013 05
General Electric GEK 28143b, GEK 117064
Alstom HTGD 90117 V 0001 AA
Dresser Rand 003-406-001 Type I and III
Solar ES 9-224Y Class II
MAN D&T SE TED 10000494596
Shell Turbo S4 GX meets Siemens Turbo-machinery
specifications 1CW0047915, WN80003798, and report
Main Applications
·
Page 1 of 3
manufacturers including:
65/0027
Shell Turbo S4 GX meets Siemens Finspong MAT812109
Turbo S4 GX 46, v 7.8
30.01.2020.09.28
·
·
·
GE Oil and Gas – Appropriate Specification listed under
document ITN52220.04
ANSALDO TGO2-0171-E00000/B
Shell Turbo S4 GX 46 is approved against the
requirements of MHPS MS04-MA-CL003 (R-5)
For a full listing of equipment approvals and
recommendations, please consult your local Shell
Technical Helpdesk.
Typical Physical Characteristics
Properties
Method
ISO 3448
ISO Viscosity Grade
Kinematic Viscosity
Kinematic Viscosity
@400C
mm2/s
0
@100 C
2
mm /s
Viscosity Index
Shell Turbo S4 GX 46
46
ASTM D445
43.5
ASTM D445
7.50
ASTM D2270
139
g/cm
IP 365
Flash Point (COC)
0
ASTM D92
250
Pour Point
0
C
ASTM D97
-27
mg KOH/g
ASTM D974
0.15
minutes
ASTM D3427
1
ASTM D130
1b
Density
0
3
@15 C
C
Neutralisation Number
Air Release
Copper Corrosion
0
@50 C
0
3hr/100 C
ASTM D665 A & B
Rust Preventing Properties
Water Separability
Foaming Characteristics
tendency,
stability
No Rust
ASTM D1401
15
seconds
IP 19
95
mL/mL
ASTM D892
minutes to 3 mL minutes
emulsion
Steam Demulsibility
0.829
Sequence I
0/0
Sequence II
0/0
Sequence III
0/0
failure load stage
ISO 14635-1
A/8.3/90
11
RPVOT
minutes
ASTM D2272
1 400
Modified RPVOT
% of RPVOT
TOST lifetime
hours
ASTM D943
10 000+
mg/kg
ASTM D4310
25
Load Carrying Capacity (FZG Gear Machine)
Oxidation Stability
TOST 1000hr sludge
Dry TOST
95%
ASTM D7873
0
@120 C
Sludge Content at 50% RPVOT
mg/kg
26
Time to 50% RPVOT
hours
1 460
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Page 2 of 3
Turbo S4 GX 46, v 7.8
30.01.2020.09.28
Health, Safety & Environment
·
Health and Safety
Shell Turbo S4 GX 46 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet (SDS) which can be obtained from
·
https://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 3 of 3
Turbo S4 GX 46, v 7.8
30.01.2020.09.28
Technical Data Sheet
Shell Turbo S5 DR 46
Fire resistant hydraulic and lubricating fluid for turbines
Shell Turbo S5 DR 46 is a fire-resistant hydraulic and lubricating fluid made using Tri-Aryl Phosphates based on
butylated phenol.
Performance, Features & Benefits
·
Main Applications
·
Excellent fire resistance
Shell Turbo S5 DR 46 is a high-performance phosphate
It can be used as the hydraulic fluid in electrohydraulic
ester self-extinguishing fire-resistant fluid, offering high
governor control (EHC) systems in steam and gas turbines.
flash point, high fire point and high auto ignition
temperature. It minimises the risk of fire, which could
·
·
·
for main bearings in steam and gas turbines, generators and
Good oxidation stability
cooling pumps. As a precaution its compatibility with system
To provide long service life under normal operating
components should be confirmed.
conditions.
Specifications, Approvals & Recommendations
Good hydrolytic stability
·
To enable rapid separation from water for improved service
Shell Turbo S5 DR 46 is approved by FM (Factory Mutual)
Global against Standard 6930 for 'Less flammable hydraulic
fluids'. It also meets the requirements of ISO Standard
Controlled air release
12922 and ASTM 4293 for HFDR-type fire-resistant
Good air-release minimises air entrainment in lubrication
hydraulic fluids.
·
For a full listing of equipment approvals and
operation of the whole equipment.
recommendations, please consult your local Shell Technical
Low foaming
Helpdesk.
Minimal tendency for foaming to provide proper lubrication
·
·
Systems (MHPS), and Siemens, etc.
intervals.
and governor control systems in order to ensure safe
·
such as General Electric (GE), Mitsubishi Hitachi Power
influence of moisture and water in the oil system.
Good demulsibility
Shell Turbo S5 DR 46 is approved and/or exceeds the
requirements of the major original equipment manufacturers
withstand rapid decomposition of the base fluid under the
·
Lubrication of steam and gas turbines
Shell Turbo S5 DR 46 can also be used as the lubricating oil
potentially be caused by mineral oil products.
Shell Turbo S5 DR 46 is to a great extent able to
·
Hydraulic fluid
Compatibility & Miscibility
·
and heat transfer.
HSSE
Compatibility - Packing, seals and hoses
The following materials are recommended for use with Shell
Shell Turbo S5 DR 46 is an advanced low toxicity fire-
Turbo S5 DR 46: Butyl rubbers, Nylon, PTFE, VITON rubber
resistant hydraulic fluid that is trixylenyl phosphate (TXP)-
(depending on operation temperature range).
free and is designed specifically to comply with future EU
REACH regulations for use in EHC systems. It is a fully
formulated fluid based on tert-butylphenylphosphate.
·
Compatibility - Paints
Attention must be paid to painted surfaces. Cured epoxy
paints are regarded as resistant to Shell Turbo S5 DR 46.
Page 1 of 2
Shell Turbo S5 DR 46, v 1.6
12.04.2019.09.47
·
Compatibility - Other fluids
Shell Turbo S5 DR can be mixed in any proportion with
other phosphate ester fluids. However, when combining
different phosphate ester products, it is always suggested
to monitor the performance of the system. The mixing of
phosphate ester fluids with mineral oil and polyol esters,
polyalkylene glycol and water-based fluids should be
avoided. For more information, please consult your local
Shell Technical Helpdesk.
Typical Physical Characteristics
Properties
Method
ISO 3448
Shell Turbo S5 DR 46
46
ISO 3104
44.5
ISO 3104
5.4
kg/m
ISO 3675
1 150
Flash Point (COC)
0
ASTM D92
262
Fire Point (COC)
0
ASTM D92
354
Pour Point
0
C
ISO 3016
-24
Neutralisation Number
mg KOH/g
ISO 6619
0.05
Water Content
m-%
ISO 760
0.04
ISO 4406
-/15/12
ISO Viscosity Grade
Kinematic Viscosity
Kinematic Viscosity
Density
@400C
0
@100 C
0
@20 C
mm2/s
2
mm /s
3
C
C
Cleanliness
Air Release
minutes
ISO 9120
5.5
Hot Manifold Ignition
0
ISO 20823
726
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Turbo S5 DR 46 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Shell Turbo S5 DR 46, v 1.6
12.04.2019.09.47
Table of Content
No. Product Name
1.
Mysella S3 N 40
2.
Mysella S5 N 40
Technical Data Sheet
Formerly Known As: Shell Mysella LA
• Reliable Protection
• Low Ash - Four Stroke Engines
Shell Mysella S3 N 40
Low Ash Stationary Gas Engine Oil
Shell Mysella S3 N is a high performance quality oil blended for use in 4-stroke, spark-ignition engines which
require a 'low ash' oil and use natural gas as fuel.
Shell Mysella S3 N satisfies the new generation of stationary gas engines designed to meet the emerging
legislation limiting emissions of NOx, and those which employ the latest 'lean' or 'clean' burn technology.
Performance, Features & Benefits
·
Extended oil life
Significantly prolongs oil life relative to previous generation
gas engine oils by resisting oxidation and nitration, viscosity
·
increase and the formation of harmful acids.
Engine protection
Shell Mysella S3 N is formulated with low ash and low
phosphorus offering extended life to valves and spark plugs
and full compatibility with emission catalysts.
Main Applications
·
·
·
·
·
·
·
·
·
·
·
·
·
·
MTU: Series 4000 L32/L33/L61/L62/L63
MWM gas engines – TR 2105
Caterpillar CG132, CG170, CG260 – TR 2105
MAK: GCM 34 Category 1
Perkins: 4000 series
Rolls Royce: KG-1, KG-2, KG-3
Wartsila: W 34SG, W 50SG, W 20DF, W 32DF, W 34DF, W
50DF, W25SG, W28SG, W 175SG, W 220SG
Waukesha: 220 GL (Pipeline Quality Natural Gas)
MAN D&T : Medium Speed Engines for gas operation
S.E.M.T Pielstick PC - Dual Fuel engines
Shell Mysella S3 N meets Requirement of:
·
·
Spark-ignited gas engines fuelled by natural gas
May also be used for landfill and biogases
Specifications, Approvals & Recommendations
Shell Mysella S3 N is suitable in engine types where a "low
ash" oil is required.
Caterpillar Stationary Gas Engines
MAN: Ruston engines (Natural Gas, Landfill Gas/Digester
gas/Biogas). Dual Fuel (Pilot Diesel)
Waukesha: other gas engine types.
Nuovo Pignone: Reciprocating Compressor Service Class A
For engines under warranty, Shell advises contact with the
Shell Mysella S3 N is approved by:
·
engine manufacturer and Shell representative to choose the
GE Jenbacher: Series 2, 3 Fuel Class A and CAT. Series 4
(Version B) Fuel Class A, B, C and CAT. Series 6 (Version
·
E) Fuel Class A, B, C and CAT.
appropriate oil given the equipment operating conditions and
customer maintenance practices.
For a full listing of equipment approvals and
Hyundai H35/40G(V) series
recommendations, please consult your local Shell Technical
Helpdesk.
Typical Physical Characteristics
Properties
Method
SAE Viscosity Grade
Shell Mysella S3 N 40
40
Kinematic Viscosity
@400C
mm2/s
ASTM D445
135
Kinematic Viscosity
@1000C
mm2/s
ASTM D445
13.5
Page 1 of 2
Mysella S3 N 40, v 3.8
01.10.2018.09.27
Properties
Density
0
@15 C
3
kg/m
Method
ASTM D4052
Shell Mysella S3 N 40
890
Flash Point, closed cup
0
ASTM D93A
230
Pour Point
0
C
ISO 3016
-18
KOH/g
ASTM D2896
Sulphated Ash
%wt
ISO 3987
0.45
Phosphorus
ppm
ASTM D4047
300
BN
C
mg
5
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Mysella S3 N is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of industrial and personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
·
Oil Analysis
For optimum results regular oil analysis is strongly recommended
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Note: this product is not designed for automotive gas engines
Page 2 of 2
Mysella S3 N 40, v 3.8
01.10.2018.09.27
Technical Data Sheet
Previous Name: Shell Mysella XL
• Extended Oil Life
• Extra Protection from Deposits and
Corrosion
Shell Mysella S5 N 40
Long Life, Low Ash Stationary Gas Engine Oil
Shell Mysella S5 N is a high performance quality oil blended for use in highly-rated, 4-stroke, spark-ignition
engines which require a 'low ash' oil.
Shell Mysella S5 N satisfies the new generation of stationary gas engines designed to meet the emerging
legislation limiting emissions of NOx, and those which employ the latest 'lean' or 'clean' burn technology.
Shell Mysella S5 N is specially developed to provide extended drain intervals in those natural gas engines where
oil life is a limiting operational factor.
·
Performance, Features & Benefits
·
Extended oil life
Specifications, Approvals & Recommendations
Significantly prolongs oil life relative to previous generation
Shell Mysella S5 N is suitable in engine types where a "low
gas engine oils by resisting oxidation and nitration, viscosity
ash" oil is required.
increase and the formation of harmful acids, especially in
demanding cogeneration (CHP) applications. (When used
with landfill or biogases, oil life will be dependent on the
·
level of contaminants in the gas.)
Shell Mysella S5 N is approved by:
·
·
Cummins QSV 81G/91G, QSK 60G
GE Jenbacher Series 2,3, 4 and CAT, Series 6 all versions
Fuel Class A and CAT, Series 4 ( from version C) Fuel Class
Engine protection
Shell Mysella S5 N offers excellent control of deposits and
piston cleanliness in advanced engine designs. Shell
Mysella S5 N is formulated with low ash and low
phosphorus offering extended life to valves and spark plugs
·
May also be used for landfill and biogases
and full compatibility with emission catalysts.
System efficiency
Shell Mysella S5 N is designed to help prevent knocking
and thereby enable engines to be run at full load and
optimum efficiency and its viscosity control helps to
minimise engine friction losses. Shell Mysella S5 N helps to
provide excellent cleanliness for the heat recovery boilers,
turbochargers and intercoolers thus allow total system to
operate with consistent performance and efficiency over
time.
Main Applications
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
B and C, Series 6 ( from version F) Fuel Class B and C
Guascor FGLD, SFGLD
MAN D&T Medium Speed Engines for Gas Operation
MAN T&B M3271-2
MTU Series 4000 L61, L62, L63, L64 and L32/L33
MTU Onsite Energy Series 400
MWM gas engines – TR 2105
Caterpillar CG132, CG170, CG260 – TR 2105
MAK GCM 34 Category 1
Rolls Royce KG-1, KG-2, KG-3, KG-4, BV-G, CR-G
Perkins 4000 series
Wartsila W 34SG, W 50SG, W 20DF, W 32DF, W 34DF, W
50DF, W25SG, W28SG, W 175SG, W 220SG
Waukesha Cogen and 220 GL (Pipeline Quality Natural Gas)
Shell Mysella S5 N meets Requirement of:
·
Spark-ignited gas engines fuelled by natural gas, especially
those creating high oil stress
Page 1 of 2
Caterpillar Stationary Gas Engines
Waukesha other gas engine types.
Tedom
Mysella S5 N 40, v 3.3
23.08.2016.07.45
For engines under warranty, Shell advises contact with the
engine manufacturer and Shell representative to choose
the appropriate oil given the equipment operating
conditions and customer maintenance practices.
For a full listing of equipment approvals and
recommendations, please consult your local Shell
Technical Help Desk.
Typical Physical Characteristics
Properties
Method
SAE Viscosity Grade
Shell Mysella S5 N 40
40
ASTM D445
125
ASTM D445
13.5
kg/m
ASTM D4052
890
Flashpoint Cleveland Open Cup
0
ASTM D92
264
Pour Point
0
C
ISO 3016
-18
BN
mg KOH/g
ASTM D2896
4.5
Sulphated Ash
%wt
ISO 3987
0.48
Phosphorus
ppm
ASTM D4047
300
Kinematic Viscosity
Kinematic Viscosity
Density
@400C
0
@100 C
0
@15 C
mm2/s
2
mm /s
3
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Mysella S5 N is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of industrial and personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
·
Oil Analysis
For optimum results regular oil analysis is strongly recommended
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Note: this product is not designed for automotive gas engines
Page 2 of 2
Mysella S5 N 40, v 3.3
23.08.2016.07.45
Table of Content
No. Product Name
1.
Refrigeration Oil S2 FR-A 68
2.
Refrigeration Oil S4 FR-V 32
3.
Refrigeration Oil S4 FR-F 32
Technical Data Sheet
Previous Name: Shell Clavus Oil S
Shell Refrigeration Oil S2 FR-A
68
• Reliable Performance
• Compatible with NH3
Refrigerator Compressor Lubricant
Shell Refrigeration Oil S2 FR-A is a low miscibility compressor lubricant intended for use in refrigeration
compressors using Ammonia refrigerant. It is formulated from specially refined paraffinic base oils in
combination with additives selected to minimise system deposits and provide long service life.
·
Performance, Features & Benefits
·
·
Refrigerant compatibility
System efficiency
Shell Refrigeration Oil S2 FR-A is recommended for use with
Shell Refrigeration Oil S2 FR-A has been specially
ammonia (R717) based refrigeration systems where it offers
optimised for use in systems where oil separation is
excellent performance, even under high compressor
required. It has been designed to reduce “light end” oil
discharge temperatures, or down to evaporation
carryover; this minimises oil thickening in the compressor
temperatures of -300C.
and reduces oil coating of internal evaporator surfaces thus
It can also be used in systems using hydrocarbons such as
maintaining overall system efficiency.
propane (R290).
Extended maintenance intervals
Shell Refrigeration Oil S2 FR-A is not recommended for use
Shell Refrigeration Oil S2 FR-A has excellent high
with CFC, HCFC or HFC refrigerants such as R12, R22 or
temperature and oxidation stability providing long service
R134a.
life even where high compressor discharge temperatures
are found.
In addition it is formulated to provide excellent control of
Specifications, Approvals & Recommendations
·
Shell Refrigeration Oil S2 FR-A meets the requirements of
DIN 51503 KAA and KE.
deposit and sludge formation resulting in extended oil drain
For a full listing of equipment approvals and
intervals in comparison with conventional mineral oil based
recommendations, please consult your local Shell Technical
refrigerator oils.
Helpdesk.
Main Applications
Compatibility & Miscibility
·
Seal Compability
Shell Refrigeration Oil S2 FR-A is compatible with all
·
commonly used sealing materials designed for use with
Refrigerator compressors
Shell Refrigeration Oil S2 FR-A is recommended for use in
open, semi-open and hermetic compressors in domestic,
commercial and industrial refrigeration systems. It can be
used in both rotary and reciprocating compressor types.
·
mineral oils.
Lubricant Compatibility
Shell Refrigeration Oil S2 FR-A is completely miscible with
mineral oil, alkylated benzene and PAO based lubricants.
Typical Physical Characteristics
Properties
ISO Viscosity Grade
Method
ISO 3448
Refrigeration Oil S2 FR-A 68
68
Refrigerator Oil
DIN 51503
KAA, KE
Page 1 of 2
Shell Refrigeration Oil S2 FR-A 68, v 1.2
07.04.2015.13.25
Properties
Method
0
Kinematic Viscosity
@40 C
0
Kinematic Viscosity
@100 C
mm /s
Refrigeration Oil S2 FR-A 68
68
mm2/s
9
2
Flash Point (COC)
0
ISO 2592
232
Pour Point
0
C
ISO 3016
-39
kg/m3
ISO 12185
862
mg KOH/g
ASTM D664 (TAN)
C
@150C
Density
Neutralisation Number
Completely miscible with
hydrocarbon based
refrigerants
Miscibility with R290
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Refrigeration Oil S2 FR-A is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Shell Refrigeration Oil S2 FR-A 68, v 1.2
07.04.2015.13.25
Technical Data Sheet
Formerly Known As: Shell Clavus Oil AB
Shell Refrigeration Oil S4 FR-V
32
• Reliable Performance
• Compatible with most standard
Refrigerants
Advanced Synthetic Refrigerator Compressor Lubricant
Shell Refrigeration Oil S4 FR-V is a synthetic refrigeration lubricant based on alkylated benzenes. It offers a
universal solution to the lubrication requirements of most refrigeration compressors and is compatible with all
commonly used refrigerants with the exception of HFCs.
Performance, Features & Benefits
·
·
Specifications, Approvals & Recommendations
·
System efficiency
Shell Refrigeration Oil S4 FR-V meets the requirements of
Shell Refrigeration Oil S4 FR-V has high solvency and is
DIN 51503 KAA and KC.
designed to maintain refrigerant cleanliness and efficiency.
For a full listing of equipment approvals and
Extended maintenance intervals
recommendations, please consult your local Shell Technical
Helpdesk.
Shell Refrigeration Oil S4 FR-V has excellent high
temperature and oxidation stability providing long service
life even where high compressor discharge temperatures
are found.
Compatibility & Miscibility
·
Refrigerant compatibility
Shell Refrigeration Oil S4 FR-V is designed for use with
In addition it is formulated to provide excellent control of
most commonly occurring refrigerants:
deposit and sludge formation resulting in extended oil drain
Ammonia (R717) systems where it offers excellent
intervals in comparison with mineral oil based refrigerator
performance, even under high compressor discharge
oils.
temperatures or down to evaporation temperatures of -330C
Main Applications
or lower.
Carbon dioxide (R744) systems.
CFC and HCFC systems (R12 and R22)
·
Refrigerator compressors
Shell Refrigeration Oil S4 FR-V is recommended for use in
·
used in both rotary and reciprocating compressor types.
Seal compatibility
Shell Refrigeration Oil S4 FR-V is compatible with all
open, semi-open and hermetic compressors in domestic,
commercial and industrial refrigeration systems. It can be
Hydrocarbon systems such as propane (R290).
·
commonly used sealing materials used with mineral oils.
Lubricant compatibility
Because of its solvency power and compatibility with
Shell Refrigeration Oil S4 FR-V is completely miscible with
mineral oils it can be used as a flushing fluid in turbine oil
mineral oil, other alkylated benzene and PAO based
circuits. For more information contact your local Shell
lubricants.
representative.
Page 1 of 2
Refrigeration Oil S4 FR-V 32, v 2.5
26.09.2019.14.34
Typical Physical Characteristics
Properties
ISO Viscosity Grade
Method
ISO 3448
Refrigeration Oil S4 FR-V 32
32
Refrigerator Oil Group
DIN 51503
KAA, KC
Kinematic Viscosity
@400C
mm2/s
ISO 3104
29
Kinematic Viscosity
@1000C
mm2/s
ISO 3104
4.1
Density
@150C
kg/m3
ISO 12185
870
Flash Point (COC)
0
ASTM D92
180
Pour Point
0
C
ASTM D97
-45
Neutralisation Number
mg KOH/g
maximum
ASTM D664 (TAN)
0.04
Characteristics when used with R12 - Floc-point
0
C maximum
DIN 51351
-50
Characteristics when used with R12 - Refrigerant @2500C
Stability
minimum
DIN 51393
96
Characteristics when used with R22 - Floc-point
0
C maximum
DIN 51351
-50
Characteristics when used with R22 - Refrigerant @2500C
Stability
minimum
DIN 51393
96
0
C maximum
DIN 51351
Miscible over the whole
range of typical refrigeration
temp.
-50
minimum
DIN 51393
96
C
Miscibility
Characteristics when used with R290 - Floc-point
Characteristics when used with R290 Refrigerant Stability
@2500C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Refrigeration Oil S4 FR-V is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
https://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Refrigeration Oil S4 FR-V 32, v 2.5
26.09.2019.14.34
Technical Data Sheet
Formerly Known As: Shell Clavus Oil R
Shell Refrigeration Oil S4 FR-F
32
• Reliable Performance
• For use with HFC Refrigerants
Advanced Synthetic Refrigerator Compressor Lubricant
Shell Refrigeration Oil S4 FR-F is a synthetic refrigeration lubricant with a polyol ester base fluid. It has been
developed for use with R134a and other HFC refrigerants.
·
Performance, Features & Benefits
·
·
Refrigerator Compressors
Extended maintenance intervals
Shell Refrigeration Oil S4 FR-F is recommended for use in
Shell Refrigeration Oil S4 FR-F has excellent high
open, semi-open and hermetic compressors in domestic,
temperature and oxidation stability providing long service
commercial and industrial refrigeration systems. It can be
life even where high compressor discharge temperatures
used in both rotary and reciprocating compressor types.
·
are found.
Refrigerant Compatibility
Wear protection
Shell Refrigeration Oil S4 FR-F is recommended for use with
Shell Refrigeration Oil S4 FR-F has been designed to
R134a and other types of HFC refrigerant.
·
minimise the wear in bearings and pistons – the most
critical parts of a reciprocating compressor.
Seal Compability
Shell Refrigeration Oil S4 FR-F is compatible with all sealing
materials commonly used with HFC refrigerant systems.
Main Applications
Specifications, Approvals & Recommendations
·
Shell Refrigeration Oil S4 FR-F meets the requirements of
DIN 51503 KD.
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Helpdesk.
Typical Physical Characteristics
Properties
ISO Viscosity Grade
Method
ISO 3448
Refrigeration Oil S4 FR-F 32
32
Refrigerator Oil Group
DIN 51503
KD
Kinematic Viscosity
@400C
mm2/s
ISO 3104
31
Kinematic Viscosity
@1000C
mm2/s
ISO 3104
6
Density
@150C
kg/m3
ISO 12185
1018
Flash Point (COC)
0
ISO 2592
>220
Pour Point
0
C
ISO 3016
-54
Neutralisation Number
mg KOH/g
ASTM D664 (TAN)
<0.06
Characteristics when used with R134a - Flocpoint
0
DIN 51351
<-50
DIN 51393
>96
Characteristics when used with R134a Refrigerant Stability
Page 1 of 2
C
C
@2500C
Refrigeration Oil S4 FR-F 32, v 1.1
11.03.2019.08.14
Properties
Method
Miscibility
Refrigeration Oil S4 FR-F 32
Miscible over the whole
range of typical refrigeration
temperatures
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Refrigeration Oil S4 FR-F is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Product Handling
Due to the hygroscopic nature of the base fluid it is recommended that, when filling the system, air contact should be
avoided as much as possible. Once an oil pack has been opened it must be sealed carefully after use and the remaining
·
contents should be used within a few days.
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Refrigeration Oil S4 FR-F 32, v 1.1
11.03.2019.08.14
Technical Data Sheet
• Extra Performance
• Meets IEC 60296 - Higher
Oxidation Stability & Low Sulphur
Content
Shell Diala S4 ZX-I
Premium Inhibited Electrical Insulating Oil
Shell Diala S4 ZX-I is the new electrical insulating oil from Shell designed to meet the challenges presented by
the latest power transformers. It offers an extended oil life with the peace of mind of zero sulphur content.
Shell Diala S4 ZX-I is manufactured from zero sulphur base oils produced using Shell’s GTL (gas-to-liquid)
technology. These base oils offer a high degree of compositional consistency and have an excellent response to
anti-oxidant. In addition they are globally available and free from PCBs, DBDS and passivators.
Shell Diala S4 ZX-I meets both the established and new industry copper corrosion tests.
Performance, Features & Benefits
·
Shell Diala S4 ZX-I is specially dried and handled to achieve
a low water content and retain a high breakdown voltage at
Extended oil life
point of delivery. This enables it to be used in many
Shell Diala S4 ZX-I is a fully inhibited oil giving outstanding
applications without further treatment.
oxidation performance and an extended oil life. Shell Diala
S4 ZX-I is also suitable for use in highly loaded
·
Main Applications
applications.
Transformer protection
Shell Diala S4 ZX-I is manufactured from a zero sulphur*
base oil, making it intrinsically non-corrosive towards
copper, without the need for passivation or other additives.
Shell Diala S4 ZX-I meets all relevant tests for copper
corrosion, namely the established DIN 51353 (Silver Strip
Specifications, Approvals & Recommendations
·
IEC 60296 (2012): Table 2 Transformer Oil (I) (Inhibited oil)
Section 7.1 (“Higher oxidation stability & low sulphur
content”)
Test), ASTM D1275, and also the latest more severe tests:
For a full listing of equipment approvals and
IEC 62535 and ASTM D1275B.
recommendations, please consult your local Shell Technical
*Sulphur content below 1ppm detection limit of ASTM
·
Helpdesk.
D5185
System efficiency
The good low temperature viscometric properties of the oil
ensure proper heat transfer inside the transformer, even
from very low starting temperatures.
Typical Physical Characteristics
Properties
Method
Appearance
IEC 60296
Density
@200C
kg/m3
ISO 3675
IEC Table 2 +
section 7.1
maximum
Clear, free from
sediment and
suspended matter
895
Kinematic Viscosity
@400C
mm2/s
ISO 3104
12
9.9
Kinematic Viscosity
@-300C
mm2/s
ISO 3104
1 800
523
0
ISO 2719
Flashpoint P.M.
Page 1 of 3
C
IEC Table 2 +
section 7.1
minimum
Clear, free from
sediment and
suspended matter
Diala S4 ZX-I, v 3.9
135
Shell Diala S4 ZX-I
Typical
Complies
805
191
07.09.2018.11.21
Properties
Method
IEC Table 2 +
section 7.1
minimum
IEC Table 2 +
section 7.1
maximum
-40
Shell Diala S4 ZX-I
Typical
Pour Point
0
C
ISO 3016
-42
Neutralisation value
mg KOH/g
IEC 62021-1
0.01
0.01
Total Sulphur Content
mg/kg
ASTM D5185
Section 7.1 limit 500
1
Corrosive Sulphur
DIN 51353
Not corrosive
Not corrosive
Potentially Corrosive
Sulphur
IEC 62535
Not corrosive
Not corrosive
Corrosive Sulphur
ASTM D1275B
*
Not corrosive
Breakdown Voltage
Untreated
kV
IEC 60156
30
70
Breakdown Voltage After
Treatment
kV
IEC 60156
70
78
Dielectric Dissipation Factor @900C
DDF
IEC 60247
Oxidation Stability
IEC 61125 C
500h
/
1200C
0.005
Section 7.1 Limits
0.001
Section 7.1 Limits
Total Acidity
mg KOH/g
IEC 61125 C
0.3
0.02
Sludge
%m
IEC 61125 C
0.05
0.01
IEC 61125 C
0.05
0.001
Dielectric Dissipation Factor
DDF
@900C
Water content (Drums/IBC)
mg/kg
maximum
IEC 60296
40
14
Water content (Bulk)
mg/kg
maximum
IEC 60296
30
14
2-Furfural and related
compounds content
mg/kg
IEC 61198
Not detectable
Complies
Metal passivator additives
mg/kg
IEC 60666
Not detectable
Complies
Oxidation inhibitor content
(DBPC)
% mass
PCA Content
% mass
IP346
PCB content
mg/kg
IEC 61619
0.2
3
Complies
Not detectable
Complies
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
*Sulphur content below 1ppm detection limit of ASTM D5185.
Health, Safety & Environment
·
Health and Safety
Shell Diala S4 ZX-I is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Shell Diala S4 ZX-I is free from polychlorinated biphenyls (PCB). Avoid contact with skin. Use impervious gloves with used
oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Storage precautions
The critical electrical properties of Shell Diala are easily compromised by trace contamination with foreign material. Typically
encountered contaminants include moisture, particles, fibres and surfactants. Therefore, it is imperative that electrical
insulating oils be kept clean and dry. It is strongly recommended that storage containers be dedicated for electrical service
Page 2 of 3
Diala S4 ZX-I, v 3.9
07.09.2018.11.21
and include air-tight seals. It is further recommended that electrical insulating oils are stored indoors in climate-controlled
·
environments.
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 3 of 3
Diala S4 ZX-I, v 3.9
07.09.2018.11.21
Table of Content
No. Product Name
1.
Tonna S2 M 68
Technical Data Sheet
Previous Name: Shell Tonna T
Shell Tonna S2 M 68
• Extra Separation from Coolants
Machine tool slideway oils
Shell Tonna S2 M oils are specially designed for the lubrication of machine tool slides, tables and feed mechanisms.
Their enhanced tackiness and stick-slip characteristics combine to offer superior frictional performance on slideways.
They are specially recommended in cases where high exposure to soluble cutting fluids exist.
Performance, Features & Benefits
Main Applications
· Ready separation from water-miscible cutting fluids
Separates completely and immediately from water-miscible
metalworking fluids allowing easy removal by skimming. This
helps to achieve longer coolant life, better cutting performance
and to reduce Health & Safety issues.
· Machine tool slideways, tables and feed mechanisms
Developed for use on a wide range of materials used for
· Good slideway adhesion
machine tool slideway surfaces, including cast iron and
Provides very effective adhesion to slideway surfaces, resisting
synthetic materials.
wash-off by metalworking fluids and thus reducing oil
Shell Tonna S2 M oils can be used also in the hydraulic and
consumption and giving more uniform working condition for
gearboxes system although in such applications Shell Tonna S3
the machine.
M oils are generally preferable.
· Good frictional properties
The lower viscosity grades are intended for horizontal slide
“Stick-slip” problems are overcome allowing more accurate
lubrication (Shell Tonna S2 M 32 or 68). For vertical slides use
positioning. This provides benefits of improved finished surface
Shell Tonna S2 M 220.
quality and dimensional accuracy of work pieces.
Specifications, Approvals & Recommendations
· Good anti-wear performance
Provides anti-wear protection for slideways, gears, bearings
and hydraulic system components.
· Excellent corrosion prevention characteristics
· Fives Cincinnati P-50 (ISO 220), P-47 (ISO 68), P-53 (ISO 32)
· ISO 19378 / ISO 6743-13 GA and GB DIN CGLP
· CGLP Slideway Oils against DIN 51502
Provides effective prevention of machine tool surfaces and
For a full listing of equipment approvals and recommendations,
components in the presence of water-miscible cutting fluids.
please consult your local Shell Technical Helpdesk.
Typical Physical Characteristics
Properties
Method
ISO 3448
Shell Tonna S2 M 68
68
ISO 3104
68
ISO 3104
8.6
ISO 2909
98
kg/m
ISO 12185
879
Flash Point (Cleveland Open Cup)
0
ISO 2592
225
Pour Point
0
ISO 3016
-24
ISO Viscosity Grade
Kinematic Viscosity
@400C
Kinematic Viscosity
0
mm /s
@15 C
3
@100 C
mm2/s
2
Viscosity Index
Density
0
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Page 1 of 2
Shell Tonna S2 M 68, v 1.2
10.09.2014.09.16
Health, Safety & Environment
· Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Shell Tonna S2 M 68, v 1.2
10.09.2014.09.16
Table of Content
No. Product Name
1.
Melina S 30
2.
Argina S2 40
3.
Argina S3 30
4.
Argina S3 40
5.
Argina S4 40
6.
Gadinia S3 30
7.
Gadinia S3 40
8.
Gadinia AL 40
9.
Alexia 40
10.
Alexia 70
Technical Data Sheet
Shell Melina S 30
Multifunctional Lubricant for low speed marine diesel engines
Shell Melina S is a high performance multifunctional low speed diesel engine lubricant based on a blend of highly
refined high viscosity index mineral oils and a balanced selection of additives. It is designed to provide the highest
levels of machinery protection in highly rated low speed marine engines, but being multifunctional, can also be used in
many different items of marine equipment and used to rationalise the number of grades of lubricant carried on board
ship. Please note that Shell Melina S is NOT recommended for trunk-piston engines and in these cases Shell Melina
should be used.
Performance, Features & Benefits
Extreme pressure properties make the oil suitable many gear oil
· Improved engine operation and reliability
applications
Shell Melina S effectively neutralises the highly corrosive
· Re-assurance
combustion acids which can contaminate the main system
Shell Melina S Oil is approved by all major low speed diesel
when cylinder oil drains leak past piston rod glands.
engine manufacturers
Good resistance to corrosion results in protection of metal
Main Applications
surfaces from corrosion
· Low speed marine diesel engine crankcase and piston cooling
systems
· Turbochargers, geared transmissions, oil lubricated stern tubes
& deck machinery
· All ancillary equipment requiring an SAE 30 oil
Good detergency keeps crankcases and under piston spaces
clean and optimise efficiency
Good air release & antifoam properties mean that air is
released from the oil without foaming
· Lower Maintenance Costs
Specifications, Approvals & Recommendations
Good Oxidation stability combats thermal degradation of the
oil and extends its useful life
For a full listing of equipment approvals and recommendations,
please consult your local Shell Technical Helpdesk.
Good water shedding properties mean that water can be
easily removed by centrifuge
Typical Physical Characteristics
Properties
Method
SAE Viscosity Grade
Shell Melina S 30
30
ASTM D445
104
ASTM D445
11.6
ASTM D2270
102
kg/l
ASTM D4052
0.888
0
C
ASTM D93
227
Fail Stage
FZG A/8.3/90
11
Pour Point
0
C
ASTM D97
-18
TBN-E
mg/KOH/g
ASTM D2896
5
Sulphated Ash
% wt
ASTM D874
0.62
Kinematic Viscosity
@400C
Kinematic Viscosity
0
@100 C
mm2/s
2
mm /s
Viscosity Index
Density
0
@15 C
Flash Point (CC)
Load Carrying Capacity
FZG
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Page 1 of 2
Shell Melina S 30, v 1.0
22.07.2014.09.15
Health, Safety & Environment
· Health and Safety
Shell Melina S 30 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
· Condition Monitoring
Shell RLA and Shell RLA OPICA engine condition monitoring services are ideal for users of Shell Melina S. Use of these services
enable the ship operator to monitor the condition of the oil and equipment, and enable remedial action to be taken when
necessary. This helps to avoid breakdowns, costly downtime and all the associated inconvenience. To fully benefit from this service,
samples should be taken at regular intervals of approximately 750 hours.
Page 2 of 2
Shell Melina S 30, v 1.0
22.07.2014.09.15
Technical Data Sheet
Replacement For: Shell Argina S 40
• PROTECTION FROM DEPOSITS
AND CORROSION
• SUITABLE FOR RESIDUAL,
BLENDED AND DISTILLATE
FUELS
Shell Argina S2 40
Lubricants for medium-speed trunk piston engines
Shell Argina S2 40 is a multifunctional crankcase lubricant for highly rated medium-speed diesel engines
operating on residual, blended or distillate fuels. Shell Argina S2 40 has a BN of 20 and is designed for conditions
of low oil stress.
Performance, Features & Benefits
·
Main Applications
·
Extended oil life
Shell Argina S2 40 is a BN 20 oil which can be used with
engines, burning residual, blended or distillate fuel oils,
multiple fuel types.
which create conditions of low oil stress. These conditions
usually occur:
Please contact your Shell technical representative who will
·
be able to offer additional support in product selection and
In newer engine designs, less than 10 years old
guidance on extending oil life and minimising sweetening.
Where oil consumption is > 1.5 g/kWh
Engine protection
Where load factors are <70%
Shell Argina S2 40 has an optimised level of detergency
Where fuels with sulphur <2% are in use
·
leading to exceptionally clean crankcase, valve deck and
·
Medium-speed industrial or marine propulsion and auxiliary
pistons.
Shell Argina S2 40 can also be used in marine engine
reduction gears and certain other ship-board applications,
System efficiency
·
Shell Argina S2 40 has a high detergency/low dispersancy
formulation in order to effectively release contaminants and
where specialist lubricants are not required.
Advice on applications not covered in this leaflet may be
obtained from your Shell Representative.
water in centrifugal separators.
Specifications, Approvals & Recommendations
Shell Argina S2 40 can be used to top up engines already
running on any other member of the Argina family, giving
Shell Argina S2 40 is approved by Wartsila and MAN
immediate control of BN without the need for an oil change.
For a full listing of equipment approvals and
Shell Argina S2 40 may be particularly applicable as a
recommendations, please consult your local Shell Technical
balancing grade for engines which switch between residual
Helpdesk.
fuel and distillate operation.
Typical Physical Characteristics
Properties
Method
SAE grade (viscosity class)
Shell Argina S2 40
40
ASTM D445
131
ASTM D445
13.7
ASTM D2270
100
kg/m
ASTM D4052
900
Flash Point (PMCC)
0
ASTM D93
230
Pour Point
0
ASTM D97
-21
Kinematic Viscosity
Kinematic Viscosity
@400C
0
@100 C
mm2/s
2
mm /s
Viscosity Index
Density
Page 1 of 2
0
@15 C
3
C
C
Shell Argina S2 40, v 1.6
19.01.2018.08.19
Properties
Base Number
mg KOH/g
Method
ASTM D2896
Shell Argina S2 40
20
Sulphated Ash
% m/m
ASTM D874
2.6
Load Carrying Capacity (FZG Gear Machine)
Failure load stage
ISO 14635-1
A/8.3/90
11
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Argina S2 40 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of industrial and personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Oil Condition Monitoring
Shell RLA engine condition monitoring service enables the ship operator to monitor the condition of the oil and equipment
and to take remedial action when necessary. This helps to avioid breakdowns and costly downtime.
Shell RLA OPICA is an integrated software system enabling RLA data to be received electronically in the office and/or on
the vessel. It contains powerful data management and graphics, enabling efficiency gains in report handling and machine
condition monitoring.
Page 2 of 2
Shell Argina S2 40, v 1.6
19.01.2018.08.19
Technical Data Sheet
Replacement For: Shell Argina T 30
• PROTECTION FROM DEPOSITS
AND CORROSION
Shell Argina S3 30
Lubricants for medium-speed trunk piston engines
Shell Argina S3 30 is a multifunctional crankcase lubricant for highly rated medium-speed diesel engines
operating on residual fuel. Shell Argina S3 30 has a BN of 30 and is designed for conditions of moderate oil
stress.
Performance, Features & Benefits
·
Main Applications
Extended oil life
Medium-speed industrial or marine propulsion and auxiliary
Shell Argina S3 30 is a BN 30 oil which has been optimised
engines, burning residual fuel oils, which create conditions of
to resist oxidation and maintain BN in order to reduce the
moderate oil stress. These conditions usually occur:
·
·
·
·
amount of oil sweetening that is required.
Please contact your Shell technical representative who will
be able to offer additional support in product selection and
·
guidance on extending oil life and minimising sweetening.
Engine protection
Where oil consumption is > 1 g/kWh
Where load factors are <85%
Where fuels with sulphur <3% are in use
Shell Argina S3 30 can also be used in marine engine
Shell Argina S3 30 has an optimised level of detergency
reduction gears and certain other ship-board applications,
leading to exceptionally clean crankcase, valve deck and
where specialist lubricants are not required.
pistons. The formulation has been further optimised to
·
In newer engine designs, less than 10 years old
Advice on applications not covered in this leaflet may be
reduce deposits in critical areas, e.g. piston undercrown.
obtained from your Shell Representative.
System efficiency
Specifications, Approvals & Recommendations
Shell Argina S3 30 has a high detergency/low dispersancy
formulation in order to effectively release contaminants and
Shell Argina S3 30 is approved by Wartsila and MAN
water in centrifugal separators.
For a full listing of equipment approvals and
Shell Argina S3 30 can be used to top up engines already
recommendations, please consult your local Shell Technical
running on any other member of the Argina family, giving
Helpdesk.
immediate control of BN without the need for an oil change.
Typical Physical Characteristics
Properties
Method
SAE grade (viscosity class)
Shell Argina S3 30
30
ASTM D445
105
ASTM D445
11.85
ASTM D2270
101
kg/m
ASTM D4052
905
Flash Point (PMCC)
0
ASTM D93
210
Pour Point
0
C
ASTM D97
-21
Base Number
mg KOH/g
ASTM D2896
30
Sulphated Ash
% m/m
ASTM D874
3.8
Kinematic Viscosity
Kinematic Viscosity
@400C
0
@100 C
mm2/s
2
mm /s
Viscosity Index
Density
Page 1 of 2
0
@15 C
3
C
Shell Argina S3 30, v 1.6
23.10.2018.10.39
Properties
Load Carrying Capacity (FZG Gear Machine)
Failure load stage
Method
ISO 14635-1
A/8.3/90
Shell Argina S3 30
11
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Argina S3 30 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of industrial and personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Oil Condition Monitoring
Shell RLA engine condition monitoring service enables the ship operator to monitor the condition of the oil and equipment
and to take remedial action when necessary. This helps to avioid breakdowns and costly downtime.
Shell RLA OPICA is an integrated software system enabling RLA data to be received electronically in the office and/or on
the vessel. It contains powerful data management and graphics, enabling efficiency gains in report handling and machine
condition monitoring.
Page 2 of 2
Shell Argina S3 30, v 1.6
23.10.2018.10.39
Technical Data Sheet
Replacement For: Shell Argina T 40
• PROTECTION FROM DEPOSITS
AND CORROSION
Shell Argina S3 40
Lubricants for medium-speed trunk piston engines
Shell Argina S3 40 is a multifunctional crankcase lubricant for highly rated medium-speed diesel engines
operating on residual, blended or distillate fuels. Shell Argina S3 40 has a BN of 30 and is designed for conditions
of moderate oil stress.
Performance, Features & Benefits
·
Main Applications
Extended oil life
Medium-speed industrial or marine propulsion and auxiliary
Shell Argina S3 40 is a BN 30 oil which has been optimised
engines, burning residual fuel oils, which create conditions of
to resist oxidation and maintain BN in order to reduce the
moderate oil stress. These conditions usually occur:
·
·
·
·
amount of oil sweetening that is required.
Please contact your Shell technical representative who will
be able to offer additional support in product selection and
·
guidance on extending oil life and minimising sweetening.
Engine protection
Where oil consumption is > 1 g/kWh
Where load factors are <85%
Where fuels with sulphur <3% are in use
Shell Argina S3 40 can also be used in marine engine
Shell Argina S3 40 has an optimised level of detergency
reduction gears and certain other ship-board applications,
leading to exceptionally clean crankcase, valve deck and
where specialist lubricants are not required.
pistons. The formulation has been further optimised to
·
In newer engine designs, less than 10 years old
Advice on applications not covered in this leaflet may be
reduce deposits in critical areas, e.g. piston undercrown.
obtained from your Shell Representative.
System efficiency
Specifications, Approvals & Recommendations
Shell Argina S3 40 has a high detergency/low dispersancy
formulation in order to effectively release contaminants and
Shell Argina S3 40 is approved by Wartsila and MAN
water in centrifugal separators.
For a full listing of equipment approvals and
Shell Argina S3 40 can be used to top up engines already
recommendations, please consult your local Shell Technical
running on any other member of the Argina family, giving
Helpdesk.
immediate control of BN without the need for an oil change.
Typical Physical Characteristics
Properties
Method
SAE grade (viscosity class)
Shell Argina S3 40
40
ASTM D445
130
ASTM D445
13.7
ASTM D2270
101
kg/m
ASTM D4052
905
Flash Point
0
ASTM D93
230
Pour Point
0
C
ASTM D97
-21
Base Number
mg KOH/g
ASTM D2896
30
Sulphated Ash
% m/m
ASTM D874
3.8
Kinematic Viscosity
Kinematic Viscosity
@400C
0
@100 C
mm2/s
2
mm /s
Viscosity Index
Density
Page 1 of 2
0
@15 C
3
C
Shell Argina S3 40, v 1.5
19.12.2017.12.00
Properties
Load Carrying Capacity (FZG Gear Machine)
Failure load stage
Method
ISO 14635-1
A/8.3/90
Shell Argina S3 40
11
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Argina S3 40 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of industrial and personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Oil Condition Monitoring
Shell RLA engine condition monitoring service enables the ship operator to monitor the condition of the oil and equipment
and to take remedial action when necessary. This helps to avioid breakdowns and costly downtime.
Shell RLA OPICA is an integrated software system enabling RLA data to be received electronically in the office and/or on
the vessel. It contains powerful data management and graphics, enabling efficiency gains in report handling and machine
condition monitoring.
Page 2 of 2
Shell Argina S3 40, v 1.5
19.12.2017.12.00
Technical Data Sheet
Replacement For: Shell Argina X 40
• EXTRA PROTECTION FROM
DEPOSITS AND CORROSION
• EXTENDED OIL LIFE
Shell Argina S4 40
Lubricants for medium-speed trunk piston engines
Shell Argina S4 40 is a multifunctional crankcase lubricant for highly rated medium-speed diesel engines
operating on residual fuel. Shell Argina S4 40 has a BN of 40 and is designed for conditions of high oil stress. In
addition Shell Argina S4 40 has been optimised to improve deposit control.
Performance, Features & Benefits
·
Main Applications
Extended oil life
Medium-speed industrial or marine propulsion and auxiliary
Shell Argina S4 40 is a BN 40 oil which has been optimised
engines, burning residual fuel oils, which create conditions of
to resist oxidation and maintain BN in order to reduce the
high oil stress. These conditions usually occur:
·
·
·
·
amount of oil sweetening that is required.
Please contact your Shell technical representative who will
be able to offer additional support in product selection and
·
guidance on extending oil life and minimising sweetening.
Engine protection
Shell Argina S4 40 has a high level of detergency leading
with flame rings.
Where oil consumption is 0.5 - 1 g/kWh
Where load factors are >85%
Where fuels with sulphur >2% are in use
Shell Argina S4 40 can also be used in marine engine
to exceptionally clean crankcase, valve deck and pistons.
reduction gears and certain other ship-board applications,
The formulation has been further optimised to reduce
·
In newer engine designs, less than 10 years old and/or fitted
where specialist lubricants are not required.
deposits in critical areas, e.g. piston undercrown.
Advice on applications not covered in this leaflet may be
System efficiency
obtained from your Shell Representative.
Shell Argina S4 40 has a high detergency/low dispersancy
formulation in order to effectively release contaminants and Specifications, Approvals & Recommendations
water in centrifugal separators.
Shell Argina S4 40 is approved by Wartsila and MAN
Shell Argina S4 40 can be used to top up engines already
For a full listing of equipment approvals and
running on any other member of the Argina family, giving
recommendations, please consult your local Shell Technical
immediate control of BN without the need for an oil change.
Helpdesk.
Typical Physical Characteristics
Properties
Method
SAE grade (viscosity class)
Shell Argina S4 40
40
Kinematic Viscosity
@400C
mm2/s
ASTM D445
127
Kinematic Viscosity
@1000C
mm2/s
ASTM D445
13.7
ASTM D2270
104
kg/m3
ASTM D4052
916
Flash Point (PMCC)
0
ASTM D93
230
Pour Point
0
C
ASTM D97
-21
Base Number
mg KOH/g
ASTM D2896
40
Sulphated Ash
% m/m
ASTM D874
5.0
Viscosity Index
Density
Page 1 of 2
@150C
C
Shell Argina S4 40, v 1.5
19.12.2017.12.04
Properties
Load Carrying Capacity (FZG Gear Machine)
Failure load stage
Method
ISO 14635-1
A/8.3/90
Shell Argina S4 40
11
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Argina S4 40 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of industrial and personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Oil Condition Monitoring
Shell RLA engine condition monitoring service enables the ship operator to monitor the condition of the oil and equipment
and to take remedial action when necessary. This helps to avioid breakdowns and costly downtime.
Shell RLA OPICA is an integrated software system enabling RLA data to be received electronically in the office and/or on
the vessel. It contains powerful data management and graphics, enabling efficiency gains in report handling and machine
condition monitoring.
Page 2 of 2
Shell Argina S4 40, v 1.5
19.12.2017.12.04
Technical Data Sheet
Replacement For: Shell Gadinia 30
• DEPOSIT/CORROSION
PROTECTION
• NON-ENGINE APPLICATIONS
Shell Gadinia S3 30
Lubricants for medium-speed marine diesel engines running on distillate fuels
Shell Gadinia S3 30 is a high quality, multifunctional diesel engine lubricant which has been specially designed
for the most severe service main propulsion and auxiliary marine trunk piston engines burning distillates, bio-fuels
and 0.1% sulphur hybrid fuels.
The newly formulated Shell Gadinia S3 30 has also been optimised for use in non-engine applications which are
typically found on board such as gearboxes, clutches and stern tubes.
Performance, Features & Benefits
·
Main Applications
Extended oil life
Shell Gadinia S3 30 offers excellent resistance to oxidation
and thermal degradation so it can offer longer oil life,
·
Highly rated, medium speed, main propulsion & auxiliary
trunk-piston stationary & marine diesel engines.
Shell Gadinia S3 30 will also perform satisfactorily in smaller
especially in high stress engines under severe operating
high-speed engines typically used in fishing fleets which
conditions.
operate under arduous conditions and have small sump
Engine protection
sizes.
Shell Gadinia S3 30 can help to extend engine life by
reducing deposit formation in the piston ring belt and
cylinder liners reducing the risk of ring sticking and
breakage.
·
·
Turbochargers, oil filled stern tubes and variable pitch
propellers.
Deck machinery & other marine applications requiring SAE
30 viscosity oils.
In addition the new formulation has been designed to
minimise laquer formation resulting in greater control of oil
·
·
·
consumption and reduced operating costs.
System efficiency
Shell Gadinia S3 30 has been designed to have greater
tolerance to engine overload or poor combustion. It will also
offer a greater safety margin to protect highly loaded
bearings, in the event of water contamination, due to Shell
Gadinia S3 30’s improved water tolerance and separation
in separators.
Specifications, Approvals & Recommendations
·
·
·
·
·
·
·
Yanmar
Daihatsu
MTU CAT I
Simplex B&V
Reintjes
Siemens/Flender
Renk, Rheine
For a full listing of equipment approvals and
Shell Gadinia S3 30 is also approved for use in a number of
non-engine applications such as gearboxes, clutches and
recommendations, please consult your local Shell Technical
Helpdesk.
stern tubes – this can help smaller operators to minimise
inventory by removing the requirement to keep multiple
specialist lubricants on board
Page 1 of 2
Shell Gadinia S3 30, v 1.6
11.10.2018.08.16
Typical Physical Characteristics
Properties
Method
SAE grade (viscosity class)
Shell Gadinia S3 30
30
Kinematic Viscosity
@400C
mm2/s
ASTM D445
104
Kinematic Viscosity
@1000C
mm2/s
ASTM D445
11.85
ASTM D2270
103
kg/m3
ASTM D4052
890
Flash Point
0
ASTM D93
210
Pour Point
0
C
ASTM D97
-21
Base Number
mg KOH/g
ASTM D2896
12
Sulphated Ash
% m/m
ASTM D874
1.5
Load Carrying Capacity (FZG Gear Machine)
Failure load stage
ISO 14635-1
A/8.3/90
12
Viscosity Index
Density
@150C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Gadinia S3 30 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
When changing from high Sulphur fuel oil to a distillate, bio-fuel or 0.1% sulphur hybrid fuel, care should be taken if
switching from Shell Argina S to Shell Gadinia S3 so as to avoid sludge formation.
·
Advice on applications not covered here may be obtained from your Shell Representative.
Condition Monitoring
Shell RLA engine condition monitoring service enables the ship operator to monitor the condition of the oil and equipment
and to take remedial action when necessary. This helps to avoid breakdowns and costly downtime.
Shell RLA OPICA is an integrated software system enabling RLA data to be received electronically in the office and/or on
the vessel. It contains powerful data management and graphics, enabling efficiency gains in report handling and machine
condition monitoring.
Page 2 of 2
Shell Gadinia S3 30, v 1.6
11.10.2018.08.16
Technical Data Sheet
Replacement For: Shell Gadinia 40
• DEPOSIT/CORROSION
PROTECTION
• NON-ENGINE APPLICATIONS
Shell Gadinia S3 40
Lubricants for medium-speed marine diesel engines running on distillate fuels
Shell Gadinia S3 40 is a high quality, multifunctional diesel engine lubricant which has been specially designed
for the most severe service in main propulsion auxiliary marine trunk piston engines burning up to 1% sulphur
distillate and bio-fuels.
The newly formulated Shell Gadinia S3 40 has also been optimised for use in non-engine applications which are
typically found on board such as gearboxes, clutches and stern tubes.
Performance, Features & Benefits
·
Main Applications
Extended oil life
Shell Gadinia S3 40 offers excellent resistance to oxidation
and thermal degradation so it can offer longer oil life,
·
Highly rated, medium speed, main propulsion & auxiliary
trunk-piston stationary & marine diesel engines.
Shell Gadinia S3 40 will also perform satisfactorily in smaller
especially in high stress engines under severe operating
high-speed engines typically used in fishing fleets which
conditions.
operate under arduous conditions and have small sump
Engine protection
sizes.
Shell Gadinia S3 40 can help to extend engine life by
reducing deposit formation in the piston ring belt and
cylinder liners reducing the risk of ring sticking and
breakage.
·
·
Turbochargers, oil filled stern tubes and variable pitch
propellers.
Deck machinery & other marine applications requiring SAE
40 viscosity oils.
In addition the new formulation has been designed to
minimise laquer formation resulting in greater control of oil
·
·
·
consumption and reduced operating costs.
System efficiency
Shell Gadinia S3 40 has been designed to have greater
tolerance to engine overload or poor combustion. It will also
offer a greater safety margin to protect highly loaded
bearings, in the event of water contamination, due to Shell
Gadinia S3 40’s improved water tolerance and separation
in separators.
Specifications, Approvals & Recommendations
·
·
·
·
·
·
·
Yanmar
Daihatsu
MTU CAT I
Simplex B&V
Reintjes
Siemens/Flender
Renk, Rheine
For a full listing of equipment approvals and
Shell Gadinia S3 40 is also approved for use in a number of
non-engine applications such as gearboxes, clutches and
recommendations, please consult your local Shell Technical
Helpdesk.
stern tubes – this can help smaller operators to minimise
inventory by removing the requirement to keep multiple
specialist lubricants on board.
Page 1 of 2
Shell Gadinia S3 40, v 1.6
03.12.2018.13.09
Typical Physical Characteristics
Properties
Method
SAE grade (viscosity class)
Shell Gadinia S3 40
40
Kinematic Viscosity
@400C
mm2/s
ASTM D445
128
Kinematic Viscosity
@1000C
mm2/s
ASTM D445
13.7
ASTM D2270
103
kg/m3
ASTM D4052
890
Flash Point
0
ASTM D93
230
Pour Point
0
C
ASTM D97
-21
Base Number
mg KOH/g
ASTM D2896
12
Sulphated Ash
% m/m
ASTM D874
1.5
Load Carrying Capacity (FZG Gear Machine)
Failure load stage
ISO 14635-1
A/8.3/90
12
Viscosity Index
Density
@150C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Gadinia S3 40 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
When changing from high Sulphur fuel oil to a distillate, bio-fuel or 0.1% sulphur hybrid fuel, care should be taken if
switching from Shell Argina S to Shell Gadinia S3 so as to avoid sludge formation.
·
Advice on applications not covered here may be obtained from your Shell representative.
Condition Monitoring
Shell RLA engine condition monitoring service enables the ship operator to monitor the condition of the oil and equipment
and to take remedial action when necessary. This helps to avoid breakdowns and costly downtime.
Shell RLA OPICA is an integrated software system enabling RLA data to be received electronically in the office and/or on
the vessel. It contains powerful data management and graphics, enabling efficiency gains in report handling and machine
condition monitoring.
Page 2 of 2
Shell Gadinia S3 40, v 1.6
03.12.2018.13.09
Technical Data Sheet
Shell Gadinia AL 40
Advanced Lubricant for medium speed trunk-piston engines running on distillate fuel.
Shell GADINIA AL is a premium quality marine diesel engine oil designed for use in medium speed trunk piston
engines, which operate on distillate fuels. Shell GADINIA AL is specially designed to control oil consumption in modern
engines, where liner -lacquering is a potential problem. Being multifunctional Shell GADINIA AL can also be used for
other shipboard applications such as reduction gears.
Performance, Features & Benefits
Main Applications
· Improved Reliability
· Highly rated medium speed diesel engines operating under
Excellent piston and crankcase cleanliness, which helps to
high load or overload conditions.
· General ship application, including gears, where specialist
maintain engine efficiency.
Load carrying properties required for use in reduction gears.
· Lower Maintenance Costs
lubricants are not required.
Specifications, Approvals & Recommendations
Excellent liner lacquer control that maintains lubricating oil
consumption at its normal level.
A high level of protection against bore polishing - another
cause of high oil consumption.
· Re-assurance
Protection for engines where cylinder liner lacquering is likely
to occur.
· Rolls-Royce, Bergen
· Deutz AG
· MAN B&W Diesel AG
· Simplex (Compact Sterntube Seals)
· API CF
For a full listing of equipment approvals and recommendations,
please consult your local Shell Technical Helpdesk.
Typical Physical Characteristics
Properties
Kinematic Viscosity
@400C
mm2/s
Method
ASTM D445
Shell Gadinia AL 40
140
Kinematic Viscosity
@1000C
mm2/s
ASTM D445
14.3
kg/l
ASTM D4052
0.900
Flash Point (PMCC)
0
ASTM D92
>200
Pour Point
0
C
ASTM D97
-18
Fail Stage
IP 334
12
Sulphated Ash
% wt
ASTM D874
1.65
BN
mg KOH/g
ASTM D2896
15
Density
Load Carrying Capacity
0
@15 C
C
FZG
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Health, Safety & Environment
· Health and Safety
Shell Gadinia AL 40 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Page 1 of 2
Shell Gadinia AL 40, v 1.0
22.07.2014.09.14
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
· Liner Lacquering
The medium-speed diesel engine is becoming more demanding to lubricate. Higher engine efficiencies are being achieved through
engine designs, which incorporate higher cylinder - pressures, higher combustion temperatures, and the use of very high-pressure
fuel injection. In some modern distillate fuelled engines, these conditions may lead to the formation of a layer of brown or black
lacquer on the cylinder liner surfaces. This can fill in the honing pattern, resulting in a loss of oil control and runaway oil
consumption. The condition is paticularly common in severe operation (e.g. overload or high torque conditions). There is also
evidence that it is more common where low sulphur (<0.5% wt) distillate fuels are in use.
Page 2 of 2
Shell Gadinia AL 40, v 1.0
22.07.2014.09.14
Technical Data Sheet
• Proven performance
• Reliable protection
Shell Alexia 40
Cylinder Lubricant for two-stroke low speed diesel engines
Shell Alexia 40 is a cylinder lubricant designed for use in two stroke low speed diesel engines specifically using
low Sulphur fuel. It is a BN 40 and SAE 50 lubricant, formulated with proven and reliable technology.
·
Performance, Features & Benefits
recommendations in the engine type specific guidelines are
Reliable engine performance:
·
·
MHI two stroke engine designs (provided the
followed)
Excellent acid neutralising properties, helping to prolong
the life of components
Cylinder oil feed rates:
Minimal deposits on pistons, piston rings, ring grooves,
·
Insufficient cylinder oil feed rate can lead to corrosive wear,
under piston spaces and in cylinder ports; low cylinder and
seized and broken rings, and consequent blow-by and
piston ring wear
scavenge fire risks, and to the formation of excess deposits.
To obtain optimum performance with Shell Alexia 40 it is
Low maintenance costs:
Keeps engines clean, minimizes maintenance requirements important to:
Observe the engine manufacturer's recommended cylinder
and allows periods between overhauls to be extended
Reassurance:
·
·
Completely stable in storage under the wide variety of
conditions encountered aboard ships
Proven ability to keep engines clean and control wear and
scuffing
Main Applications
Shell Alexia 40 is a BN 40 cylinder lubricant for use in low
speed diesel engines burning low sulphur fuel. For detailed
·
·
·
·
·
oil feed rates as a minimum
Follow the manufacturer's feed rate recommendations when
running in new liners and / or rings
Ensure the lubricator drive system is well maintained and
properly adjusted
Clean and overhaul lubricator boxes according to
manufacturer's recommendations
Regularly monitor lubricant performance through use of tools
such as Shell LubeAnalyst and Shell LubeMonitor
application advice based on your specific engine type and
operating conditions, please refer to manufacturer's
For a full listing of equipment approvals and
guidelines.
recommendations, please consult your local Shell Technical
Helpdesk.
Specifications, Approvals & Recommendations
Compatibility & Miscibility
·
Shell Alexia 40 has been approved for use in:
·
·
MAN-ES two stroke engine designs (provided the
Mixing of cylinder lubricants
recommendations in the engine type specific guidelines are
Shell Alexia 40 is fully miscible and compatible with all other
followed)
cylinder lubricants in the Shell portfolio.
WinGD two stroke engine designs (provided the
For optimum performance, Shell Alexia 40 should not be
recommendations in the engine type specific guidelines are
used in conjunction with other cylinder lubricants.
followed)
Page 1 of 2
Alexia 40, v 1.0
21.12.2018.12.01
Typical Physical Characteristics
Properties
Method
SAE Viscosity Grade
Viscosity Index
minimum
DIN ISO 2909
Shell Alexia 40
50
95
Kinematic Viscosity
@1000C
mm2/s
ASTM D445
18.5
Density
@150C
kg/m3
DIN EN ISO 12185
915
Flash Point
0
ASTM D93
210
Pour Point
0
C maximum
ISO 3016
-20
BN
mg/KOH/g
ISO 3771
40
Sulphated Ash
% wt
Calculated
Sulphated Ash
5.2
C minimum
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Alexia 40 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Alexia 40, v 1.0
21.12.2018.12.01
Technical Data Sheet
• Proven performance
• Reliable protection
Shell Alexia 70
Cylinder Lubricant for two-stroke low speed diesel engines
Shell Alexia 70 is a cylinder lubricant designed for use in two stroke low speed diesel engines using residual fuel
oil. It is a BN 70 and SAE 50 lubricant, formulated with proven and reliable technology.
·
Performance, Features & Benefits
recommendations in the engine type specific guidelines are
Reliable engine performance:
·
·
·
followed)
Excellent acid neutralising properties, helping to prolong
the life of components
Cylinder oil feed rates:
Minimal deposits on pistons, piston rings, ring grooves,
·
Insufficient cylinder oil feed rate can lead to corrosive wear,
under piston spaces and in cylinder ports; low cylinder and
seized and broken rings, and consequent blow-by and
piston ring wear
scavenge fire risks, and to the formation of excess deposits.
To obtain optimum performance with Shell Alexia 70 it is
Low maintenance costs:
Keeps engines clean, minimizes maintenance requirements
and allows periods between overhauls to be extended.
Reassurance:
·
·
·
MHI two stroke engine designs (provided the
Completely stable in storage under the wide variety of
conditions encountered aboard ships
Proven ability to keep engines clean and control wear and
scuffing
Compatible with all normal oil seal materials.
Main Applications
Shell Alexia 70 is a BN70 cylinder lubricant for use in low
important to:
·
·
·
·
·
Observe the engine manufacturer's recommended cylinder
oil feed rates as a minimum
Follow the manufacturer's feed rate recommendations when
running in new liners and / or rings
Ensure the lubricator drive system is well maintained and
properly adjusted
Clean and overhaul lubricator boxes according to
manufacturer's recommendations.
Regularly monitor lubricant performance through use of tools
such as Shell LubeAnalyst and Shell LubeMonitor
speed diesel engines burning heavy fuel oil. For detailed
For a full listing of equipment approvals and
application advice based on your specific engine type and
recommendations, please consult your local Shell Technical
operating conditions, please refer to manufacturer's
Helpdesk.
guidelines.
Compatibility & Miscibility
·
Specifications, Approvals & Recommendations
Shell Alexia 70 has been approved for use in:
·
Shell Alexia 70 is fully miscible and compatible with all other
MAN-ES two stroke engine designs (provided the
recommendations in the engine type specific guidelines are
·
Mixing of cylinder lubricants
cylinder lubricants in the Shell portfolio.
For optimum performance, Shell Alexia 70 should not be
followed)
used in conjunction with other cylinder lubricants.
WinGD two stroke engine designs (provided the
recommendations in the engine type specific guidelines are
followed)
Page 1 of 2
Alexia 70, v 1.1
13.09.2019.12.24
Typical Physical Characteristics
Properties
Viscosity Index
minimum
Method
DIN ISO 2909
Shell Alexia 70
95
Kinematic Viscosity
@100 C
mm2/s
ASTM D445
18.5
Density
@150C
kg/m3
DIN EN ISO 12185
932
Flash Point
0
ASTM D93
210
Pour Point
0
C maximum
ISO 3016
-6
BN
mg/KOH/g
ISO 3771
70
Sulphated Ash
% wt
Calculated
Sulphated Ash
9
0
C minimum
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Alexia 70 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
https://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Alexia 70, v 1.1
13.09.2019.12.24
Technical Data Sheet
Shell Nautilus Premium Outboard
Leisure Marine 2 stroke engine oil
Nautilus Premium Outboard Oil is a high performance lubricant for the protection of two-stroke gasoline outboard
motors.
Its advanced formulation, which exceeds all outboard motor manufacturers' standards, is a guarantee of long and
reliable engine life.
Performance, Features & Benefits
·
·
Main Applications
Shell Nautilus Premium Outboard Oil exceeds the
All two-stroke gasoline outboard motors with or without
requirements of all major outboard motor manufacturers
separate oil tanks.
and all industry specifications.
Specifications, Approvals & Recommendations
·
·
Certified by NMMA (National Maritime Manufacturers'
Association) for service TC-W3 at the manufacturer's
recommended fuel/oil ratio (up to 100:1).
NMMA Certified TC-W3® , NMMA License Number: RL00444K
Certified by NMMA (National Marine Manufacturers
Association) for service TC-W3® at the manufacturer's
recommended fuel/oil ratio (up to 100:1)
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Helpdesk.
Typical Physical Characteristics
Properties
ASTM D445
Shell Nautilus Premium
Outboard
55
ASTM D445
8.9
kg/m
ASTM D4052
870
Flash Point (PMCC)
0
ASTM D93
70
Pour Point
0
C
ASTM D97
-35
Sulphated Ash
% wt
IP 163
0.01
Kinematic Viscosity
Kinematic Viscosity
Density
Method
@400C
0
@100 C
0
@15 C
mm2/s
2
mm /s
3
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Nautilus Premium Outboard Oil is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
http://www.epc.shell.com
Page 1 of 2
Nautilus Premium Outboard, v 1.3
19.11.2018.13.57
·
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Self-Mixing Properties
Shell Nautilus Premium Outboard Oil is a self-mixing oil. It is blended to the correct viscosity for use in oil injection systems
·
fitted to two-stroke gasoline outboard motors.
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Nautilus Premium Outboard, v 1.3
19.11.2018.13.57
Technical Data Sheet
Formerly Known As: Shell Thermia B
Shell Heat Transfer Oil S2
• Reliable Performance
High Performance Heat Transfer Fluid
Shell Heat Transfer Oil S2 is based on carefully selected, highly refined mineral oils chosen for their ability to
provide superior performance in indirect closed fluid heat transfer systems.
Performance, Features & Benefits
·
Main Applications
Extended maintenance intervals
Shell Heat Transfer Oil S2 is based on carefully selected
highly refined mineral oils and resists oil cracking, oxidation
·
and thickening. This provides extended oil life, provided
Enclosed circulated heat transfer systems for industrial
efficient fluid heating and good pump circulation is ensured,
applications such as process industry, chemical plants,
such that film temperatures on the heater surface do not
textile producers etc. and in household equipment such as
exceed the limits below.
oil filled radiators.
·
System efficiency
Low viscosity enables excellent fluidity and heat transfer
continuous heat transfer equipment with the following
over a wide temperature range. Shell Heat Transfer Oil S2
application limits:
these would require recovery via expansion chamber and
·
·
condensate collector.
Specifications, Approvals & Recommendations
also has a low vapour pressure so resists cracking. This
minimises the formation of volatile decomposition products;
·
Shell Heat Transfer Oil S2 can be used in high temperature
·
·
Wear protection
Shell Heat Transfer Oil S2 is non-corrosive and has high
solvency – this reduces deposit formation by holding
Max. film temperature : 320ºC
Max. bulk temperature : 300ºC
Classified as ISO 6743-12 Family Q
Meets DIN 51522 requirements
For a full listing of equipment approvals and
oxidation products in solution and keeping internal surfaces
recommendations, please consult your local Shell Technical
of heat exchangers clean.
Helpdesk.
Typical Physical Characteristics
Properties
Density
@200C
kg/m3
Method
ISO 12185
Shell Heat Transfer Oil S2
857
Flash Point (PMCC)
0
ISO 2719
208
Flash Point (COC)
0
ISO 2592
220
Pour Point
0
C
C
ISO 3016
-12
2
ISO 3104
29
2
ISO 3104
5.1
2
mm /s
ISO 3104
1.4
Initial Boiling Point
0
ASTM D2887
330
Autoignition temperature
0
C
DIN 51794
332
Neutralisation Value
mg KOH/g
ASTM D974
<0.2
Ash (Oxide)
% m/m
ISO 6245
<0.01
Kinematic Viscosity
Kinematic Viscosity
Kinematic Viscosity
Page 1 of 2
C
0
@40 C
0
@100 C
0
@200 C
mm /s
mm /s
C
Heat Transfer Oil S2, v 1.4
08.10.2018.13.17
Properties
Carbon Residue (Conradson)
% m/m
0
Copper Corrosion (3 hrs/100 C)
Coefficient of Thermal Expansion
Method
ISO 10370
Shell Heat Transfer Oil S2
<0.01
ISO 2160
Class 1
0.0008
1/0C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Heat Transfer Oil S2 is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
The life of Shell Heat Transfer Oil S2 depends on the design and usage of the system. If the system is well designed and not
subjected to abnormal workloads, the life can be for many years.
It is important to monitor oil condition regularly as rates of change in physical characteristics are more significant than actual
values. The properties that should be monitored are viscosity, acidity, flash point (open and closed) and insolubles content.
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Heat Transfer Oil S2, v 1.4
08.10.2018.13.17
Table of Content
No. Product Name
1.
Ondina 15
Technical Data Sheet
Shell Ondina Oil 15
Medicinal white oils
Shell Ondina Oils are highly refined, non-additive, aromatic-free paraffinic white mineral oils complying with the
stringent pharmacopoeia purity requirements. Ondina oils can be used in pharmaceutical, food packaging,
cosmetic and other applications, where this high purity is required by legislation or important for the quality of the
finished product.
·
Performance, Features & Benefits
·
·
·
High purity
The use of medicinal white oils in direct and indirect food
Refined to the highest degree of purity removing all
applications, e.g. as food additives or for food packaging, is
aromatics; consisting only of chemically inert and iso-
regulated by international specifications supplemented by
paraffin molecules.
local legislation. These requirements may deviate from
Optimal quality control
country to country and must be taken into account by the
Segregated product lines during production, storage,
user.
blending and filling; extensive laboratory control testing.
Excellent stability
Exceeding oxidation and light stability of standard process
oils.
Main Applications
·
·
·
·
·
Machinery lubrication
Cosmetic and Pharmaceuticals
Components in cosmetic creams, lotions, oils, toiletries etc.
Food packaging
Specifications, Approvals & Recommendations
·
·
·
·
·
European Pharmacopoeia 3rd Edition
US Pharmacopoeia 29th and 30th Editions
US FDA §172.878 (“White Mineral Oil”) for direct food
contact
US FDA §178.3620(a) for indirect food contact
FDA specifications, where above specified oils are positively
listed e.g.
Extender oil in polystyrene and other plastics, price labels.
§173.340, §175.105, §175.210, §175.230, §175.300,
Hygiene articles
§176.170, §176.180, §176.200, §176.210, §177.1200,
Extender oil in thermoplastic TPE (e.g. SIS, SEPS), TPV
§177.2260, §177.2600, §177.2800, §178.3120, §178.3570,
and other elastomers.
§178.3740, §178.3910, §573.680.
·
Technical applications and car components
UK ‘The Mineral Hydrocarbon in Food Regulations 1966’
Carrier fluid and extender oil for a variety of high quality
For a full listing of equipment approvals and
applications, where colour and stability is important.
recommendations, please consult your local Shell Technical
Suitable when PVC is replaced by TPE elastomers.
Helpdesk.
Toys and similar articles
Extender oil in TPE elastomers (e.g. SBS, SEBS)
Page 1 of 2
Ondina 15, v 1.1
06.10.2016.10.45
Typical Physical Characteristics
Properties
Method
ISO 3448
ISO Viscosity Grade
Shell Ondina Oil 15
15
Specifications - Europ. Pharmacopoeia 3
Light Liquid Paraffin
Specifications -US Pharmacopoeia 29, 30
Light Mineral Oil
ASTM D156
+30
kg/m3
ISO 12185
850
Flashpoint (COC)
0
ISO 2592
180
Pour Point
0
C
ISO 3016
-12
Colour (Saybolt)
Density
@150C
C
Kinematic Viscosity
@400C
mm2/s
ISO 3104
15
Kinematic Viscosity
@1000C
mm2/s
ISO 3104
3.3
Pass
Purity Requirements for Medicinal White Oils
acc.Europ.Pharm.
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Ondina Oil 15 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2
Ondina 15, v 1.1
06.10.2016.10.45
Technical Data Sheet
Formerly Known As: Shell Delima S Oils
Shell Paper Machine Oil S3 M
220
• Extra Protection
• Water Shedding
• Long Life
Paper Machine Circulating Oils
Shell Paper Machine Oils S3 M are high performance oils based on modern ashless additive technology. They
are designed to provide excellent all round protection for the diverse needs and conditions found in modern paper
machines. They meet the requirements of Metso, SKF and Voith systems.
·
Performance, Features & Benefits
·
Good oil life – Maintenance saving
There is extensive operator experience with Shell Paper
Shell Paper Machine Oils S3 M have been designed to
Machine Oils S3 M in many applications especially in Metso
resist breakdown under high temperatures and in the
and Voith paper machine circulating systems, which include
presence of water. They have excellent performance in
the dry and wet ends of the machine plus the calender
tests such as the ASTM Turbine Oil Stability Test (TOST),
stacks.
a commonly used method of assessing relative oil life
·
capability.
Reliable wear & corrosion protection
Shell Paper Machine Oils S3 M use a modern, ashless
(zinc-free) anti-wear system to provide high performance
protection against wear.
Shell Paper Machine Oils S3 M are specifically designed for:
·
·
·
protection against corrosion, even in the wet environments
found in paper machine applications.
Maintaining system efficiency
Excellent water separation and air release helps in
conjunction with high quality base oils helps ensure the
efficient lubrication of the machines and systems.
Shell Paper Machine Oils S3 M are also suitable for use
Lubrication of bearings, gears and auxiliary equipment in the
wet end and dryer sections of paper machines
Hydraulic and lubrication systems in deflectioncompensating rolls
Enhanced protection of gears under severe operating
conditions.
In addition, they are formulated to provide effective
·
Paper machine applications
Specifications, Approvals & Recommendations
·
·
·
·
·
SKF (paper machine oils)
Metso (paper machine oils)
Voith VN 108
DIN 51517-2 – type CLFAG FE-8 (1200C)
FZG load stage 12 (DIN 51354)
with fine filtration to help ensure effective contaminant free
For a full listing of equipment approvals and
lubrication to critical machine parts.
recommendations, please consult your local Shell Technical
Helpdesk.
Main Applications
Compatibility & Miscibility
·
Seal & Paint Compatibility
Shell Paper Machine Oils S3 M are compatible with seal
materials and paints normally specified for use with mineral
oils.
Page 1 of 3
Paper Machine Oil S3 M 220, v 2.3
16.08.2018.08.45
Typical Physical Characteristics
Properties
Kinematic Viscosity
Kinematic Viscosity
0
@40 C
0
@100 C
mm /s
Method
ASTM D445
Paper Machine S3 M 220
220
mm2/s
ASTM D445
19.2
2
ISO 2909
98
kg/m3
ISO 12185
897
Flash Point (COC)
0
ISO 2592
250
Pour Point
0
C
ISO 3016
-21
mins
ASTM D1401
10
ASTM D665B
Pass
Viscosity Index
Density
Demulsibility Separation Time
@150C
C
@820C
Rust Test, Synthetic Sea Water
Oxidation Life (TOST)
hrs
ASTM D943
4378
Timken, OK Load
lbs
ASTM D2782
60
Foam Test, Seq II ml
ml foam at 0/10
mins
ASTM D892
0/0
ASTM D5182
12 Pass
FZG Load Stage
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
·
Health and Safety
Shell Paper Machine Oils S3 M are unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
The bulk temperature of the oil should not continuously exceed 800C.
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3
Paper Machine Oil S3 M 220, v 2.3
16.08.2018.08.45
Page 3 of 3
Paper Machine Oil S3 M 220, v 2.3
16.08.2018.08.45
Technical Data Sheet
Shell Tegula V 32
Advanced Technology Oil for Hydrodynamic Transmissions
Shell Tegula V 32 is an advanced technology oil designed to meet the latest requirements of variators and
advanced railway transmission systems combining hydrodynamic couplings and torque converters with
mechanical gears.
Performance, Features & Benefits
·
·
·
·
·
·
·
Main Applications
·
Based on a blend of highly refined mineral oils and
Railway hydrodynamic transmission systems
optimized additive system for superior thermal and
Transmission systems for railway diesel engines consist of
oxidative stability
various combinations of fluid couplings, torque converters
Meets increased thermal requirements of railway
and transmission gears. This type of transmission is used in
hydrodynamic transmissions for extended drain intervals
combination with a hydrodynamic brake which is operated to
Provides excellent and constant air release properties over
reduce brake shoe wear during periods of prolonged braking
long period
down long slopes. At times, the brake oil temperature may
reach up to 1400C.
properties permit excellent load carrying capacity with
·
reduced component wear
Specifications, Approvals & Recommendations
Excellent extreme-pressure and micro-pitting resistance
·
·
·
Compatibility with all seal materials and paints normally
specified for use with mineral oil
Enhanced compatibility with yellow metals even at higher
temperatures
Not recommended for use in industrial couplings if
Gears and PIV variator lubrication
Voith General lubricant list 120.00059010, Version 6
Former: Voith 3.285-149 (for use in Voith Power
Transmissions)
Tegula V 32 is approved and recommended by Voith Turbo,
PIV and Lenze
excessive water entrainment cannot be avoided
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Help Desk.
Typical Physical Characteristics
Properties
Method
Shell Tegula V 32
32
ISO Viscosity Grade
Kinematic Viscosity
@400C
mm2/s
ISO 3104
32
Kinematic Viscosity
@1000C
mm2/s
ISO 3104
5.6
ISO 2909
110
kg/m3
ISO 12185
870
Flash Point (COC)
0
ISO 2592
211
Pour Point
0
ISO 3016
-30
FZG-Test A/8.3/90 Failure Load Stage
0
DIN 51354-2
>12
Viscosity Index
Density
@150C
C
C
C
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Page 1 of 3
Tegula V 32, v 1.2
02.06.2017.07.29
Health, Safety & Environment
·
Health and Safety
Shell Tegula V is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Page 2 of 3
Tegula V 32, v 1.2
02.06.2017.07.29
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
·
http://www.epc.shell.com/
Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
·
Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 3 of 3
Tegula V 32, v 1.2
02.06.2017.07.29