Scroll down for your test NCCER TESTING HAS GONE DIGITAL The new testing system makes module testing easier than ever. 1. Multiple Test Versions - Automatically scrambles test questions for you. 2. Electronic Format - Create, launch, score and submit module tests all online. 3. Web-Based Platform - No special software or hardware requirements. 4. Proctor Station - Administer tests easily and quickly. 5. Responsive Design - Automatically conforms to multiple devices (i.e. laptops, tablets, Google Chromebooks & Macbooks). Visit nccer.org/testing to find out why you should make the switch! 1.888.622.3720 Module 03205 Exam Leak Detection, Evacuation, Recovery, and Charging Trainee Name: _________________________________________________________________ Social Security Number: _________________________________ Date: __________________ MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1. Two refrigerants exempted from the EPA requirement to recover, recycle, and reclaim are _____. a. ammonia and carbon dioxide b. ammonia and hydrogen sulfide c. carbon dioxide and hydrogen sulfide d. hydrogen sulfide and butane 2. Which of the following is the only EPA-approved refrigerant that can be used for leak testing? a. HFC-410A b. HFC-134a c. HFC-407C d. HCFC-22 3. When pressurizing a system for leak testing, a safe test pressure is typically _____. a. 50 psig b. 75 psig c. 125 psig d. 250 psig 4. A typical nitrogen cylinder is charged to a pressure of roughly _____. a. 3,500 psig b. 2,000 psig c. 1,000 psig d. 250 psig 5. An apprentice in training is exempt from the technician certification requirement for a period of _____. a. five years after training has been completed b. two years after training has been completed c. five years from the date the apprenticeship was initially registered d. two years from the date the apprenticeship was initially registered 6. For the most serious violations of the Clean Air Act, the EPA will _____. a. file an administrative order directing the party to comply with the law b. issue a field citation, much like a speeding ticket, for the violation c. issue a Section 114 letter to the accused d. prosecute the case in federal court ______________________________________________________________________________ HVAC, Module 03205 V5 Exam Copyright © 2018 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice. Page 1 of 4 7. When using a self-contained recovery unit to recover refrigerant vapor, the discharge of the recovery unit is typically connected to _____. a. a suitable plastic recovery bag b. a recovery cylinder c. the high-side port of the gauge manifold d. the low-side port of the gauge manifold 8. Which of the following situations typically prevents the use of the push-pull method of refrigerant recovery? a. The system is equipped with a fixed metering device. b. The system is equipped with a TXV. c. The system being recovered contains 7 pounds of refrigerant. d. The system being recovered contains 36 pounds of refrigerant. 9. Moisture in a system reacts with refrigerant to form _____. a. an azeotrope b. acids c. air d. nitrogen 10. The oil in a vacuum pump should be changed _____. a. about every five minutes of pump operation b. only when changing from one refrigerant to another c. during or immediately after pumping down a wet system d. about every 25 hours of pump operation 11. A vacuum pump with a capacity of 6–12 cfm should be adequate to evacuate systems with capacities up to _____. a. 10 tons b. 30 tons c. 50 tons d. 100 tons 12. Which of the following values is closest to a perfect vacuum? a. 50 microns b. 500 microns c. 1,300 microns d. 25,000 microns ______________________________________________________________________________ HVAC, Module 03205 V5 Exam Copyright © 2018 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice. Page 2 of 4 13. During or following an evacuation, which of the following typically indicates a refrigerant circuit has a leak? a. The vacuum gauge drops rapidly to 500 microns and will not go lower. b. The vacuum gauge shows a pressure rise that continues up to 0 psig when the pump is isolated. c. The vacuum gauge shows a pressure rise but levels off between 1,000 and 2,000 microns when the pump is isolated. d. A constant reading on the vacuum gauge of 500 microns is displayed when the pump is isolated. 14. Near-azeotropic refrigerants are technically _____. a. HFCs b. HCFCs c. zeotropes d. compounds 15. When charging a system that uses a zeotropic refrigerant, the system should always be charged using _____. a. the superheat method b. the subcooling method c. vapor refrigerant from the cylinder d. liquid refrigerant from the cylinder 16. The range of temperatures within which a zeotropic refrigerant changes state at a given pressure is known as its _____. a. saturation range b. latent-heat band c. fractionation rate d. temperature glide 17. What is the best way to tell if a disposable refrigerant cylinder is equipped with a dip tube? a. Crack the valve to see what comes out b. Determine if it is an HFC or an HCFC c. Determine if it is azeotropic or near-azeotropic d. Check the cylinder labeling 18. A technician should use a charging scale to weigh charged refrigerant _____. a. only when a system holds less than one pound b. on every occasion, regardless of the method used c. only if the customer requests it d. when zeotropic refrigerants are being charged 19. Charging by superheat is performed on systems that use a _____. a. fixed-orifice metering device b. thermostatic expansion valve c. sight glass d. thermal-electric expansion valve ______________________________________________________________________________ HVAC, Module 03205 V5 Exam Copyright © 2018 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice. Page 3 of 4 20. Which of the following statements is true? a. Systems with fixed metering devices cannot be charged accurately using the superheat method. b. Systems with fixed metering devices cannot be charged accurately by weight. c. Systems with TXVs cannot be charged accurately using the superheat method. d. Systems with TXVs cannot be charged accurately by weight. ______________________________________________________________________________ HVAC, Module 03205 V5 Exam Copyright © 2018 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice. Page 4 of 4 Module 03205 Answer Key Leak Detection, Evacuation, Recovery, and Charging Question 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Answer A D C B D D B C B C B A B C D D D B A C Section Reference 1.0.0 1.2.2 1.2.2 1.2.2 2.1.2 2.1.6 2.2.4 2.2.5 3.1.0 3.2.1 3.2.1; Table 4 3.2.2 3.2.4 4.0.0 4.0.0 4.0.0 4.1.1 4.1.2 4.2.2 4.2.3 Objective 1 1b 1b 1b 1b 2a 2b 2b 3a 3b 3b 3b 3b 4 4 4 4a 4a 4b 4b