International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395-0056
Volume: 06 Issue: 04 | Apr 2019
p-ISSN: 2395-0072
www.irjet.net
DESIGN AND FABRICATION OF BEACH CLEANING MACHINE
Vivek Dhole1, Omkar Doke2, Ajitkumar Kakade3, Shrishail Teradale4, Prof. Rohit Patil5
1,2,3,4UG
Students, Department of Mechanical Engineering, Suman Ramesh Tulsiani Technical Campus Faculty of
Engineering, Pune, Maharashtra, India
5Assistant Professor, Department of Mechanical Engineering, Suman Ramesh Tulsiani Technical Campus Faculty
of Engineering, Pune, Maharashtra, India
----------------------------------------------------------------------***--------------------------------------------------------------------Abstract - Due to the difficulties faced in keeping the beach
clean manually, we have come up with equipment which
not only collects the waste (sticks, on degradable waste)
but also separates, which is easy for waste disposal. The
machine mainly consists of an engine which runs through a
fossil fuel which drives the entire process. The waste is
collected through conveyor blade along with the sand
which falls of through the perforations on the conveyor
back to the sand bed; separation of waste material takes
place through principle of Density difference. It consists of
two hoppers where the different waste gets collected
which facilitates easy disposal of waste.
management system by which worker can maintain all his
health and work good through application maintain that
reporting worker don’t need to wait and get in to drainage.
One more very useful and important advantage of our
system is that the worker to replace the manual work in
beach cleaning by semi mechanical beach cleaner. And can
access them very easily
1.1 Background
A , beach cleaner, is a vehicle that drags a raking or sifting
device over beach sand to remove rubbish and other
foreign matter. They are manually self-pulled vehicles on
tracks or wheels or pulled by quad-bike or tractor. Seaside
cities use beach cleaning machines to combat the
problems
of litter left
by
beach
patrons
and
other pollution washed up on their shores. A chief task in
beach cleaning strategies is finding the best way to handle
waste
matter
on
the
beaches,
taking
into
consideration beach erosion and changing terrain. Beach
cleaning machines work by collecting sand by way of a
scoop or drag mechanism and then raking or sifting
anything large enough to be considered foreign matter,
including sticks, stones, litter and other items. Similar
applications include lake beaches, sand fields for beach
volleyball and kindergarten and playing field sandpits. The
word "sand bone" is a back-formation referencing the icesurfacing machine Zamboni.
1. INTRODUCTION
The coastal area beaches are main attraction for tourism,
so in attracting tourist the beach must be kept clean. For
the purpose of cleaning the beach, some cleaning machine
must be used so we have manufactured a cleaning
machine which is helpful in cleaning the beaches.
The motor is responsible for driving mechanism of
conveyor. The strainer attached to the conveyor will
collect the wastages from the surroundings and
transferred to storage bucket through conveying belt.
As today’s era is moving towards being digitalized and
automated with a great speed, the youth want everything
very easily and smart. Not only the youth but the people of
all generation are finding it very easy to be smart effort
and more and more being healthy and are getting
attracted or joined towards latest technology of being
“smart work”. Anywhere you go, you get this technology
available. So we thought of using this technology and
adding more to it for our final year project. Nobody likes to
suffer and wait for our long waiting hours just to get good
surrounding or so. To avoid this and to save time of our
management of waste we are creating a application called
“Smart cleaning system”. For that we are using system by
which beach cleaner can do his work smartly using
communication through application.
Smart Cleaning
System proposed to overcome the real time problems.
With the continued expansion of industries, the problem
of sewage water must be urgently resolved due to the
increasing sewage problems from industries of the
surrounding environment. The wastes produced from the
industries are very harmful to human beings and to the
environment. Second Important thing is waste
© 2019, IRJET
|
Impact Factor value: 7.211
1.2 Type of beach cleaning machine
1. Manually Method
2. Automatic
a) Raking technology
b) Sifting technology
c) Combined raking and sifting technology
a.
|
Raking technology: - can be used on dry or wet sand.
When using this method, a rotating conveyor belt
containing hundreds of tines combs through the sand
and removes surface and buried debris while leaving
the sand on the beach. Raking machines can remove
materials ranging in size from small pebbles, shards of
glass, and cigarette butts to larger debris, like seaweed
and driftwood. By keeping the sand on the beach and
ISO 9001:2008 Certified Journal
|
Page 796
International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395-0056
Volume: 06 Issue: 04 | Apr 2019
p-ISSN: 2395-0072
www.irjet.net
only lifting the debris, raking machines can travel at
high speeds
b. Shifting technology :-It is practiced on dry sand and
soft surfaces. The sand and waste are collected via the
pick-up blade of the vehicle onto a vibrating screening
belt, which leaves the sand behind. The waste is
gathered in a collecting tray which is often situated at
the back of the vehicle. Because sand and waste are
lifted onto the screening belt, sifters must allow time
for the sand to sift through the screen and back onto
the beach. The size of the materials removed is
governed by the size of the holes in the installed
screen
c. Combined raking and sifting technology:- The
differs from pure sifters in that it uses rotating tines to
scoop sand and debris onto a vibrating screen instead
of relying simply on the pick-up blade. The tines'
position can be adjusted to more effectively guide
different-sized materials onto the screen. Once on the
screen, combined raking and sifting machines use the
same technology as normal sifters to remove
unwanted debris from the sand.
d. Sand sifting by hand:- It is used for smaller areas or
sensitive habitat. Sand and debris is collected into a
windrow or pile and manually shoveled onto screened
sifting trays to separate the debris from the sand.
While effective, it requires the movement of sand to
the site of the tray, and then redistribution of the sand
after sifting. A more efficient method is the use of a
screened fork at the place where the debris is located.
The effort to manually agitate the sand can become
tiresome; however, a recent development of a batterypowered sand rake combines the spot cleaning
effectiveness of manual screening with the ease of an
auto-sifting hand tool.
The New model will get good efficiency compare to old
method
4. LITERATURE REVIEW
ECONOMICS ASPECTS OF BEACH CLEANING TRAILER
[1]
Beach litter collection is a concern for Bang Sane beach,
one of the popular tourist attractions of Thailand. In order
to solve this problem, a beach cleaning trailer was
designed and fabricated with emphasis on the use of local
materials and local production. The design trailer
prototype 3.7x1.6meters was carried out using a three
dimensional solid modeling computer program. This
paper explores the economics of the beach-cleaning trailer
in terms of payback period, charging rate to customer,
working areas. The research provided some positive
results on economics aspects. The design trailer prototype
has been developed and fabricated with emphasis on the
use of local materials and local production. The machine
has been tested at Bang Saen beach in Thailand. We have
explored the economics of the beach-cleaning trailer in
terms of payback period, charging rate to customer,
working areas. The research provided some positive
results on economics aspects. We hope to further design
and develop the fully mechanized beach cleaning trolley.
DESIGN AND CONSTRUCTION OF BEACH CLEANING
TRAILER BY FINITE ELEMENT METHOD [2]
The design of a beach cleaning trailer is presented. The
basic design principle of a foreign beach cleaning machine
was taken into consideration. Apart from the tire and
hydraulic hoses, all components of the beach cleaning
trailer were made from steel. This study focuses on stress
analysis in the ball bearing housing by the finite element
method. Actual tests have been carried out in fields. This
study aims to report the performance of the beach
cleaning trailer. Stresses in the ball bearing housing are
calculated by FEM. A stress analysis made using the forces
acting on the ball bearing housing showed the maximum
Von Mises stress of the ball bearing housing to be 63.0
MPa. The safety factor was 3.94. It showed that it was very
durable to use. For the future work, economic analysis
should be performed to develop and design a fully
mechanized beach cleaning machine. The designed and
developed beach cleaning trailer was quite appropriated
to be used due to utilizing of local materials, with reel of
blade enhancement
2. PROBLEM STATEMENT
To minimize the problem of wastage in river, lake, sea
due to the plastic, electronic items, thermocol, metal etc.
This causes huge amount of water pollution which effects
on aquatic animals as well as human life. It is also used in
small scale industries to remove the solid wastage from
water with minimum cost.
3. SCOPE
The objective of this work is to develop a New Automatic
operated Machine of Beach Cleaning.
This concept allows us to achieve our goal as well as better
space management.
BEACH CLEANING EQUIPMENT”PROJECT REFERENCE
NO. : 37S0546 [3]
The new model takes into account all the real time
conveying system and provides solution over their short
coming.
© 2019, IRJET
|
Impact Factor value: 7.211
Due to the difficulties faced in keeping the beach clean
manually, we have come up with equipment which not
only collects the waste (sticks, no degradable waste) but
also separates, which is easy for waste disposal. The
machine mainly consists of an engine which runs through
|
ISO 9001:2008 Certified Journal
|
Page 797
International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395-0056
Volume: 06 Issue: 04 | Apr 2019
p-ISSN: 2395-0072
www.irjet.net
a fossil fuel which drives the entire process. The waste is
collected through conveyor blade along with the sand
which falls of through the perforations on the conveyor
back to the sand bed; separation of waste material takes
place through principle of Density difference. It consists of
two hoppers where the different waste gets collected
which facilitates easy disposal of waste.
effort of the board user as well as to introduce the
classroom with an automation system.
DRAINAGE SYSTEM CLEANER A SOLUTION TO
ENVIRONMENTAL HAZARDS [6]
The Drainage system cleaner is a machine which helps to
protect the environment from different kinds of
environmental hazards through the promotion waste
management by the removal of garbage from the drainage
system. These wastes when not removed end up settling in
residential places where these wastes are burnt thereby
causing climate change otherwise these wastes block the
drainage systems thereby causing flooding. The machine is
designed in such a way that it generates motion for its
functions by itself through the action of running water
thereby cutting out the dangers of the powering the
machine by other sources of power because of the
harshness of the rain on these other sources. The drainage
system cleaner has three major parts which are the
Propeller, the Cleaner and the Pan all make up for its
effective functioning. The Drainage system cleaner was
tested on three different days in the first day it rained in
the months of September, October and November 2012
respectively. Based on the findings made after the test the
Drainage system functioned well when there is maximum
load. I therefore recommend the use of this system by
various individuals, government companies and waste
recycling companies for prevention of environmental
hazards and also encouraging waste management
SAND SCREENING AND WASHING MACHINE [4]
In recent years the foundry industry has been showing an
increased interest in Screening and washing of sands.
Deposits of sand and gravel, the unconsolidated granular
materials resulting from the natural disintegration of rock
or stone, are generally found in near-surface alluvial
deposits and in subterranean and subaqueous beds. Sand
and gravel are siliceous and calcareous products of the
weathering of rocks and unconsolidated or poorly
consolidated materials. Grain shape, screen analysis,
chemical characteristics, as well as thermal characteristics,
must be uniform to get uniform properties in today's sand
mixes. We are in a process of developing a concept which
has the capability to bring revolution in the field of
construction in most developing nations of the world. We
present here our concept of “sand screening and washing”.
This project is a combination of basic principles called as
screening and washing which is being used for many
centuries in the field of construction all around the world.
Through this present investigation following some
important conclusions are made which are discussed
below Considering the present case study, the screened
and washed sand is obtained by combining two different
processes. The labor cost of operation can be reduced with
less time taken. It requires less area and it is portable
AUTOMATIC
WHITEBOARD
CLEANER
MICROCONTROLLER BASED RACK AND
MECHANISM [5]
5. Model Design Image:-
USING
PINION
At recent years whiteboard has become a crucial element
at almost every educational institute. They are large in
size, for that reason it is very time consuming and tedious
process to erase the writings from the board with duster
manually. It breaks concentration of both lecturers and
listeners. Automatic Whiteboard Cleaner can solve these
problems. Automatic whiteboard cleaner will reduce the
time and also the effort. It takes around 6 secs to clear the
board smoothly. This paper represents the design and
construction of automatic whiteboard cleaner. The system
consists of Adriano microcontroller, driver module, dc
gear motor, rack and pinion mechanism, sonar sensor,
supports, and a cleaner bar to give that an automation
figure. When the switch is on, it moves across the full
width of the board and its direction is reversed
automatically in order to clean the board. So, this
“Automatic Whiteboard Cleaner” is a great replacement of
“duster” and it can be suggested to use this to reduce the
© 2019, IRJET
|
Impact Factor value: 7.211
Dimension of machine
|
ISO 9001:2008 Certified Journal
|
Page 798
International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395-0056
Volume: 06 Issue: 04 | Apr 2019
p-ISSN: 2395-0072
www.irjet.net
Working Flow Chart
Cad model of drain cleaning machine
ACKNOWLEDGEMENT
6. Working Principal
On the very outset of the review paper we would like to
Extend our sincere and heart full obligation to words Prof.
P.V. Bute (H.O.D), Prof M.A. Mane, Prof. R.R. Patil and all
staff of mechanical engineering Department SRTTC
Kamshet. Without their active Guidance, help, cooperation and encouragement we would not have made
headway in this paper
The device is place across a beach and sea so that only
beach sand can get through the lower basement. Floating
waste like bottles, plastic cans, covers any kind of
waste.etc. Is lifted by lifters which are connected to the
chain. The chain revolves with the sprocket wheel which is
driven by the motor. The energy provided to the motor is
electrical energy. When motor runs the chain starts to
circulate making the lifter to lift up. The wastage material
are lifted by lifter teeth and stored in collecting box. Once
the collecting box is full, the waste materials are removed
from the box. There is 45 to 50 degree bend plate which is
assembled at the bottom of the box. It is mainly used to
leveling the beach surface. The material which we are
going to use is M/S Mid-Grade which is easily Available in
market with less cost compare to others
CONCLUSION
This system help to clean beaches so it keep the sand clean
and save the ocean life from garbage pollution This system
does not need more human labor for the waste water
cleaning and this can reduce the direct contact of the
human labor with the waste water so there is no hazard
for the human labor. Also this method is automatic so the
working time is less as compared to the conventional
method.. Because of this project as there is no direct
contact of the worker with garbage so the health of worker
will be good and he will be able to work for a longer
duration. This system is fabricated with emphasis on the
use of local materials and local production.
The two rollers are connected apart from each other
through belt drive on which perforated buckets are
mounted through riveting joint. As system is allowed into
drainage, the roller starts rotating the buckets will move
inside the drainage which will goes up to material inside
the drainage block. The bucket will pick up the wastage
material and floating material from drain block. The
bucket allow water to flow out as being perforated and
only waste part will collected into storage collector behind
the belt drive.
© 2019, IRJET
|
Impact Factor value: 7.211
REFERENCES
|
[1].
D. Smith, Harris Pearson. (1955). Farm machinery
and equipment. Tata McGraw-Hill, India, 519p.
[2].
Hunt, D. (2002). Farm Power and Machinery
Management, Laboratory Manual and Workbook, 7th
Ed., Iowa State University: AMES IOWA.
[3].
Campbell, Joseph K. (1990) Dibble sticks, Donkeys
and Diesels. International Rice Research Institute,
Philippines.
[4].
RNAM Test Codes& Procedures for Farm Machinery
(1955) Technical Series No 12 Economic and Social
Commission for Asia and the Pacific Regional
Network for Agriculture Krissanaerane, Suravej.
ISO 9001:2008 Certified Journal
|
Page 799
International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395-0056
Volume: 06 Issue: 04 | Apr 2019
p-ISSN: 2395-0072
www.irjet.net
(2005) Farm machinery and crop production
management. Co-opthai printing, Bangkok.
[5].
Kratzer, Donald. (1979) US Patent number 4241792:
Groundsweeper.
Available
Source:
http://www.google.com/patents/US4241792.
December 2012.
[6].
Prakobkarn, K., B. Saitthiti, S. Intaravichai, (2012)
Design and Contruction of Beach Cleaning Trailer by
Finite Element Method. INT TRANS J ENG MANAG SCI
TECH,
Vol.
3(2),
Available
Source:
http://www.TuEngr.com/V03/111-123.pdf,
February 2012.
[7].
Gilmour, Richard (1976) US Patent number
4050518: A beach cleaning apparatus. Available
Source:http://www.google.com/patents/USPAT405
0518. December 2012\.
He is now pursuing Bachelor of
Mechanical Engineering in final year
at Suman Ramesh Tulsiani Technical
Campus Faculty of Engineering ,
Pune ,Maharashtra, India
He is now pursuing Bachelor of
Mechanical Engineering in final year
at Suman Ramesh Tulsiani Technical
Campus Faculty of Engineering ,
Pune ,Maharashtra, India
Assistant Professor, Department of
Mechanical Engineering, Suman
Ramesh Tulsiani Technical Campus
Faculty of Engineering, Pune,
Maharashtra, India
ASAE. (2000) (American Society of Agricultural
Engineers, Standards. Agricultural Machinery
Management.
[9]. Logan, Daryl L. (2002). A first course in the Finite
Element Method. Third Edition Brooks/Cole, United
States of America.
[10]. Rao, Singiriresu S. (2005) the Finite Element Method
in Engineering. Fourth Edition. Elsevier ButterworthHeinemann. United States of America. 663 p.
[11]. Chou, P.C. and Pagaro, J.N. (1967) Elasticity tensor,
Dyadic and Engineering Approaches. Over
publication, Inc., 290 p. New York.
[12]. Beer, Gernot. (2001) Programming the Boundary
Element Method An Introduction forEngineers.John
Wiley & sons Ltd. Great Britain.457
[8].
BIOGRAPHIES
He is now pursuing Bachelor of
Mechanical Engineering in final year
at Suman Ramesh Tulsiani Technical
Campus Faculty of Engineering ,
Pune ,Maharashtra, India
He is now pursuing Bachelor of
Mechanical Engineering in final year
at Suman Ramesh Tulsiani Technical
Campus Faculty of Engineering ,
Pune ,Maharashtra, India
© 2019, IRJET
|
Impact Factor value: 7.211
|
ISO 9001:2008 Certified Journal
|
Page 800