)LOWHUGHZDWHUDQGGLVFKDUJHILOWHUFDNHDXWRPDWLFDOO\ Automatic Dewatering Filter ● Applications ● Sludge treatment from chemical conversion coating solution ● Recovery of chemical polishing solution ● Treatment of coolant solution ● Various types of subfilter ● Recovery of rinse water solution ● Other treatments requiring pressure-driven dewatering 7KLVILOWHUSHUIRUPVILOWUDWLRQGHZDWHULQJDQG GLVFKDUJHRIILOWHUFDNHDXWRPDWLFDOO\ 7KHILOWHUSDSHULVIHGWRLWVILOWUDWLRQFKDPEHU ZKHUHILOWUDWLRQDQGFDNHGHZDWHULQJLVGRQH 7KHILOWHUSDSHULVWKHQUROOHGWRGLVFKDUJHWKHFDNH DQGLVDXWRPDWLFDOO\ZLQGHGEDFNLQWKHXQLW ［ FEATURES OF FK Filter ］ Minimum manpower needed due to its fully automatic operation As a fully automatic dewatering unit, it is economical compared with other types Effectively utilizes filter paper by pressure filtration Eliminates loss of solution and improves the disposal of cake by dewatering Provides stable filtration capacity owing to the use of a new filter paper per batch; The filter paper is also reusable when required We can manufacture products that conform to the CE mark standards. FLOW SHEET DIMENSIONS Filtration Process PG D Raw Solution Inlet Filtrate Outlet W ［ Timer or Pressure ］ Dewatering Process Air Inlet PG Filtrate Outlet Cake Discharge Process PG Filter Paper ● Technical ● ● Filter Paper Roller H Cake Discharge Cake Receiver Specifications Model Filter area ［m2］ Filtration capacity ［m3 / hr］ Inlet / Outlet pipe size ［mm］ Filter paper width ［mm］ Weight ［kg］ Dimensions［W×D×H］ ［mm］ Air requirement FK2L 0.2 〜3 Inlet 40 / Outlet 40 500 500 1,430×1,245×1,931 500Nℓ/min × 0.5MPa FK4L 0.4 〜6 Inlet 50 / Outlet 40 650 740 1,555×1,423×2,159 1,000Nℓ/min × 0.5MPa The filtration capacity depends on the raw water quality. We can change wetted-part materials to a stainless specification, in addition to a rubber lining specification. ■ These specifications in this catalogue are subject to change, in the interest of technical improvement, without notice. Head Office 2-22-2 Kamejima, Nakamura-ku, Nagoya City, Aichi Pref., Japan 453-0013 TEL : +81（52）451-7291 FAX : +81 （52）451-7292 http://www.sanshin-mfg.co.jp/ PRINTED IN SEP. 2017 EN-18 EN-1 JQA-QMA10397 JQA-EM1682 本部 / 犬山工場
