Uploaded by Сергей Какаров

Add User's Guide Backup and Restore MAN-00081 001 01

advertisement
Artwork and Signature File for:
MAN-00081 ADDENDUM, SEL SCW BU/RESTORE PROC
Artwork consists of:
•
REV AUTHORED BY
BILL MOSES
REV DRAFTED BY
Four (4) 8 ½ inch x 11 inch pages.
Osteoporosis Assessment
LORAD© Breast Cancer Detection
DirectRay © Digital Imaging
FLUOROSCAN © C-arm Imaging
DOCUMENT NUMBER
DATE
7/21/03
DATE
PROPRIETARY: This document contains TITLE
proprietary data of Hologic, Inc. No
disclosure, reproduction or use of any
part thereof may be made except by
written permission from Hologic.
REV. RELEASE DATE:
08/05/03
ADDENDUM, SEL SCW
BU/RESTORE PROC
ARTWORK
REV
AW-00238
SIZE A
001
SHEET 1 OF 1
Form ENG-0034-T03, Rev. 001
Addendum to Selenia Softcopy Workstation—User’s Guide
9-500-0293 Rev 001 Backup & Restore
1.0
Backup Database (existing user info and/or patient data)
The Softcopy Workstation provides a database backup and restore process. However, because of permission
issues, this is not currently available to the SCR user. For this reason, the backup is performed manually by exiting
the SCW and working in the Windows environment.
1. Exit SCW software. Double click TB On (to turn Toolbar on)
2. Make the directory c:\SCWBackup (if one already exists, the contents will be overwritten)
To make a new directory:
•
Double click on My Computer
•
Double click on the Data(C:) drive
•
From the File menu, select New, then select Folder
•
Type the name SCWBackup
3. Versions 1-0-10 and 1-1-1: Run the database backup program C:\MBC-SCR-1\BackRes.exe.
Versions 1-1-4 and higher: Double click on Database Backukp and Restore on the Desktop.
Figure 1: Window for Backup/Restore 4 SQL Base
4. Verify entries as shown above.
5. Click the BACKUP button. A warning message appears.
Figure 2: Warning message: Overwriting older backup files
6. Confirm with Yes.
7. After a successful backup, the following message appears: Click OK.
Figure 3: Message Box: Backup was made
Manufactured by LORAD, A Hologic Company®
36 Apple Ridge Road, Danbury, CT 06810 (203) 207-4500
MAN-00081, Revision 001
Page 1
Addendum to Selenia Softcopy Workstation—User’s Guide
9-500-0293 Rev 001 Backup & Restore
8. The window displays the “backup performed” status.
Figure 4: Status Message Backup performed
9. Close the window by pressing the x button
in the upper right corner.
Note … Backups should be saved to CD-R by using Easy CD Creator. See below.
2.0
To create a CD
1. Insert a blank CD-R into the CD-R drive.
2. Double click on the TB ON icon on the desktop to turn the toolbar on.
3. Start Easy CD Creator:
SCW Versions 1-0-10 and 1-1-1:
•
In Windows, from the Start menu, click on Run.
•
Browse to "C:\Program files\Roxio\Easy CD creator 5\Easy CD creator\creatr50.exe" and click OK.
SCW Ver 1-1-4 and higher :
•
Page 2
Double click the Create CD icon on the desktop.
Manufactured by LORAD, A Hologic Company®
36 Apple Ridge Road, Danbury, CT 06810 (203) 207-4500
MAN-00081, Revision 001
Addendum to Selenia Softcopy Workstation—User’s Guide
9-500-0293 Rev 001 Backup & Restore
Figure 5: Easy CD Creator application Window
4. In the Easy CD Creator application, in the File menu, select New CD project - Data CD.
5. In the upper window, go to "C:\SCWBackup" and drag the folder to the lower window (dataCDproject). (Or
select the directory and press the ADD button).
6. Click on the red circular Record button.
7. Click options and select "Finalize Session, don't Finalize CD" option.
8. Click “Start Recording”.
9. When the burning process is finished, eject the CD-R, and label it as “SCW Backup with the date”.
10. Click Ok. Close the Easy CD Creator application.
11. Double click on the TB OFF icon on the desktop.
12. Double click the SCW icon on the desktop to restart the SCW application.
3.0
RESTORING THE DATABASE
1. Versions 1-0-10 and 1-1-1:To Restore a database, run the database program C:\MBC-SCR-1\BackRes.exe.
Versions 1-1-4 and higher: Double click on Database Backup and Restore on the Desktop.
2. Verify entries as shown below. If restoring from CD, click BackupDir and select d:\SCWBackup.
Manufactured by LORAD, A Hologic Company®
36 Apple Ridge Road, Danbury, CT 06810 (203) 207-4500
MAN-00081, Revision 001
Page 3
Addendum to Selenia Softcopy Workstation—User’s Guide
9-500-0293 Rev 001 Backup & Restore
Figure 6: Enter Information for restore.
3. Click the RESTORE button. A warning message appears.
Figure 7: Warning message: Overwriting All current data.
4. Confirm with Yes.
5. After a successful restore the following message appears.
Figure 8: Message Box: Restore was made
6. Confirm with OK. The window displays the “restore performed” status.
Figure 9: Restore performed
7. Close the window by pressing the x button
Page 4
in the upper right corner.
Manufactured by LORAD, A Hologic Company®
36 Apple Ridge Road, Danbury, CT 06810 (203) 207-4500
MAN-00081, Revision 001
Download