Uploaded by Hatem Shawki

ineo-222-282-362 poster en 1-0-0

advertisement
BASIC FUNCTIONS
MAKE A COPY
1.
LOAD PAPER IN TRAY 1
REFILL
HOW TO USE THE MACHINE
PANEL
Position the original(s).
1.
TOUCH SCREEN
Confirm your
access data
NOTE:
Do not touch the film located
at the right-hand end of the
tray.
Change the mode
RESET the
settings
Box
Extra/Scan Fax/Scan
Access
2.
Type in the number of copies.
Switch to
Enlarge
display
mode
3.
Press the START key.
Reset
Copy
ABC
DEF
Interrupt
GHI
JKL
MNO
Power
PQRS
TUV
WXYZ
Accessibility
Open
Accessibility
settings
Interrupt a
copy job
2.
Load the paper into tray 1
(not higher than ,).
POWER
ON/OFF
3.
Align the trailing-edge guide
with the paper.
Proof Copy
Mode Memory
Enlarge Display
Utility/
Counter
Pull out tray 1.
Stop
Start
Contrast
Mode Check
STOP a
process
Main Power
Adjust contrast of
the touch screen
Save copy
settings
Check the
settings
CLEAR a
value
Change presettings of
the machine/
Check the machine’s counter
START a
process
Proof a
copy set
CHANGE THE PAPER SELECTION (only for the bypass tray)
Input a value or
a number
1.
Open the bypass tray.
2.
Load the paper onto the bypass tray (not higher than ,).
3.
Touch the desired paper selection.
4.
Press the START key.
TOUCH SCREEN (Basic screen)
STOP A COPY PROCESS
1.
Message display
Press the STOP key.
Number of copies
Change to the functions
of the tab
Choose function of
the BASICS tab
CLEAR A VALUE
1.
Press the CLEAR key.
Indication of free
memory
Open Job list screen
Save scanned data
in a registered User Box
ineo 222/282/362
Choose a FINISHING
function (Sort, group,
staple ...)
Scan originals of different
sizes
Short Guide 1/3
BASIC FUNCTIONS
DENSITY
BASIC FUNCTIONS
ZOOM
1.
Position the original(s).
2.
Touch ZOOM in the basic screen.
3.
Touch the desired function.
4.
Press the START key.
Change zoom manually
Preset zoom values
by the user/Different
values for X and Y
(distortion)
Automatically
reduce/enlarge
original size to
paper size
1.
Position the original(s).
2.
Touch QUALITY/DENSITY in the basic
screen.
3.
Touch the desired function.
4.
Press the START key.
Little bit smaller than
original size (value can
be changed*)
Keep original size
Preset zoom values
DUPLEX
Select exposure level of
print image
*refer to User Manual for Copy Operations
APPLICATION FUNCTIONS
IMAGE REPEAT
Select exposure level of the
background color of the colored
original
FINISHING FUNCTIONS
FINISHING (only with Finisher)
CREATE A BOOKLET
1.
Position the original(s).
1.
Position the original.
1.
Position the original(s).
1.
Position the original(s).
2.
Touch SIMPLEX/DUPLEX in the basic screen.
2.
Touch APPLICATION in the basic screen.
2.
Touch FINISHING in the basic screen.
2.
Touch FINISHING in the basic screen.
3.
Select the desired function.
3.
Touch IMAGE REPEAT.
3.
Touch the desired function.*
3.
Touch CREASE.
4.
Touch OK.
4.
4.
Touch ENTER.
4.
Touch ENTER.
5.
Press the START key.
Touch AUTO DETECT or
Touch Oversized Paper to select the area to be scanned.
5.
Press the START key.
5.
Press the START key.
*available functions depend on machine/finisher
5.
Touch ENTER until the basic screen is shown.
6.
Touch PAPER in the basic screen.
7.
Select the paper tray loaded with the paper.
8.
Press the START key.
+
w/o Finisher
ineo 222/282/362
*available functions depend on machine/finisher
with Finisher
Short Guide 2/3
FAX OPERATIONS
SEND A FAX (only with Fax option)
1.
Position the original(s).
2.
Press the FAX/SCAN key on the
panel.
3.
Enter the fax number and press
the START key.
BOX OPERATIONS
SAVE IN USER BOX
PRINT FROM USER BOX
1.
Position the original(s).
1.
Press the BOX key on the panel.
2.
Touch SAVE IN USER BOX in the basic screen.
2.
Touch RETRIEVE FROM HDD.
3.
Touch the button for the index containing the box.
4.
Select the index tab, and select the location where the data is to
be saved from the list of displayed boxes.
5.
Enter a document name.
3.
Open the box.
4.
Touch the desired document.
NETWORK SCAN OPERATIONS
SCAN TO E-MAIL (Direct input)
SEARCH FOR AN E-MAIL ADDRESS (LDAP)
1.
Position the original(s).
1.
Position the original(s).
2.
Press the FAX/SCAN key on the panel.
2.
Press the FAX/SCAN key on the panel.
3.
Touch DIRECT INPUT.
3.
Touch SEARCH.
4.
Touch Change COMM.Mode.
4.
Touch LDAP Search.
5.
Touch PC and E-Mail.
5.
Touch Name.
6.
Touch ENTER.
6.
Type in the keyword, and then touch Enter.
7.
Enter the destination address.
7.
Touch Start Search.
8.
Select the destination.
9.
Enter the destination information, and then touch
Dest. Register.
8.
Press the START key.
10. Select the transmission method, and then touch Enter.
6.
Touch ENTER.
7.
Select whether or not a copy will also be printed when the
data is saved.
8.
Touch ENTER.
9.
Press the START key.
ineo 222/282/362
5.
Touch ACTION.
6.
Touch PRINT to print out the document.
Short Guide 3/3
Download