DC Power Systems
for Business-Critical Continuity
NetSure 801 Series DC Power System
NetSure 801 Series
DC Power System
Features
Wide AC input range from 260V to
530Vac
System efficiency up to 93%
Hot swappable rectifier and
monitoring module
Front access, top / bottom cable entry
Remote monitoring through RJ45,
RS232 and replay output
Surge protection on AC,DC and signal
side
Introduction
NetSure 801 power system is a new generation of highly reliable power system
designed by Emerson. The system can be smoothly expanded up to 6000A through
parallel connection. It is applicable for following applications:
Large and medium switching office
Level-1 transmission backbone line
GSM mobile switching office, mobile tandem exchange
CDMA mobile switching office, mobile tandem exchange
System Configuration
Easily expandable with more power or
feature when new demand arise
Rectifier R48-5800
Monitor M810G
Utilize CE/UL approved rectifier
R48-5800
AC Distribution Cabinet (PD380/400AFH-6, PD380/630AFH-6, PD380/630AFA-6)
DC Distribution Cabinet (PD48/1600DF-6, PD48/2500DF-6, PD48/2000HF-6/X1)
Rectifier Cabinet (Rack1000-6, Rack2000-6)
System comply with EN60590 and
EN300386, ROHS
System Electrical Specifications
Input Voltage Range
260
Input Frequency Range
45
Power Factor
Efficiency
Nominal Output Voltage
530Vac (half power at 260
65Hz
0.99
93%
-42Vdc
Load Sharing
-58Vdc
1%
Environmental
NetSure 801 Series DC Power System
Operating Temperature
Relative Humidity
Elevation
Storage Temperature
-10
+65
95% RH
4200m
-40
+70
(derating from 45
)
304Vac)
Monitoring Module M810G
NetSure 801 Series
DC Power System
AC Distribution Cabinet
Features
Menu operated and user friendly
Configurable 8 pcs replay output and 4 pcs digit input
Remote monitoring through RJ45, RS232, modem, support TCP/IP, SNMP, web browser
Features
Up to 400 alarm history logs
Built-in CPU, independent monitoring
Backlit large LCD display of AC voltage,
current, frequency and status of
lightning arrester
M810G
Intelligent battery monitoring
Visual and audible alarms
Features
Wide AC input range from 260V to
530Vac
System efficiency up to 93%
Rectifier can output 50% power in
phase-missing conditions
Hot swappable rectifier and
monitoring module
Front access, top / bottom cable entry
Remote monitoring through RJ45,
RS232 and replay output
Introduction
NetSure 801 power system is a new generation of highly reliable power system
designed by Emerson. The system can be smoothly expanded up to 6000A through
parallel connection. It is applicable for following applications:
Large and medium switching office
Level-1 transmission backbone line
GSM mobile switching office, mobile tandem exchange
CDMA mobile switching office, mobile tandem exchange
Rectifier Module R48-5800
General
Safety
CE,UL EN60950: 1992,UL1950
EMC
EN55022 Class B
Enclosure
IP20
MTBF
> 390000 hours
Input Characteristics
System Configuration
Range
Unit
Remark
V
Half power at 260
Voltage
260
Rectifier R48-5800
Monitor M810G
Line Frequency
45
Power Factor
0.99
Easily expandable with more power or
feature when new demand arise
AC Distribution Cabinet (PD380/400AFH-6, PD380/630AFH-6, PD380/630AFA-6)
DC Distribution Cabinet (PD48/1600DF-6, PD48/2500DF-6, PD48/2000HF-6/X1)
Rectifier Cabinet (Rack1000-6, Rack2000-6)
THD
5%
System Electrical Specifications
Input Voltage Range
Input Frequency Range
Power Factor
Efficiency
Nominal Output Voltage
260
45
DC emergency lighting available in
case of mains failure
Expandable up to 5 AC cabinets
R48-5800
Output Power
Surge protection on AC,DC and signal
side
Utilize CE/UL approved rectifier
R48-5800
System comply with EN60590 and
EN300386, ROHS
Visual and audible alarm
Two mains auto/manual switchover
Front access, top / bottom cabling
530Vac (half power at 260
65Hz
0.99
304Vac)
530Vac
65
Lightning proof and electrical
insulation in compliance with IEC
standard, ROHS compliant
100%
304Vac
50%
Hz
Output Characteristics
Range
Unit
Remark
Voltage
-42
Vdc
100%
Current
0
A
50%
Power
5800
W
100A@-58V
Power Density
0.813
W/cm 3
Size used: 85H 224W 371D
Efficiency
93%
40% 100% load
Peak to peak noise
50
mV
0
Psophometric weighted noise
0.5
mV
(300
260
304
530
Output Power VS Input Voltage
50% 110% load
122
Output Power
Temperature
-40
0
40
60
Output Power VS Temperature
20MHz
3400Hz)
93%
-42Vdc
Load Sharing
-58Vdc
Rectifier Cabinet Configuration
1%
Rack1000-6
Rack2000-6
M810G
0
1
R48-5800
1
10
M810G
0
1
R48-5800
1
20
*Note: One M810G supports up to 60 R48-5800 rectifiers.
Environmental
NetSure 801 Series DC Power System
Operating Temperature
-10
+65
(derating from 45
)
Model
HxWxD(mm)
Rack1000-6
2000
600
600
600
600
Relative Humidity
95% RH
Rack2000-6
2000
Elevation
4200m
R48-5800
88
M810G
87.5
Storage Temperature
-40
+70
244
372
243.5
Weight (kg)
161
2
Remark
150
Not including rectifiers
180
Not including rectifiers
7.8
PD380/400AFH-6/X1 PD380/630AFH-6/X1 PD380/630AFA-6/X1
AC Input
AC Output
DCEmergency
Output
3 phase / 5 line
3 phase / 5 line
3 phase / 5 line
Manual switchover
Manual switchover
Automatic switchover
400A/3Px2
630A/3Px2
630A/3Px2
4
160A/3P(MCCB)
6
160A/3P(MCCB)
6
160A/3P(MCCB)
1
63A/3P(MCB)
1
63A/3P(MCB)
1
63A/3P(MCB)
1
32A/3P(MCB)
1
32A/3P(MCB)
1
32A/3P(MCB)
3
32A/1P(MCB)
3
32A/1P(MCB)
3
32A/1P(MCB)
3
20A/1P(MCB)
3
20A/1P(MCB)
3
20A/1P(MCB)
100A/48V
100A/48V
100A/48V
Input Voltage
0
-58
Input / Output Specifications
Including faceplate
Rack 1000-6
Rack 2000-6
Mechanical Specifications
Model
H x W x D(mm)
PD380/400AFH-6/X1
2000
800
600
Weight(kg)
240
PD380/630AFH-6/X1
2000
800
600
260
PD380/630AFA-6/X1
2000
800
600
300
Monitoring Module M810G
NetSure 801 Series
DC Power System
AC Distribution Cabinet
Features
Menu operated and user friendly
Configurable 8 pcs replay output and 4 pcs digit input
Remote monitoring through RJ45, RS232, modem, support TCP/IP, SNMP, web browser
Features
Up to 400 alarm history logs
Built-in CPU, independent monitoring
Backlit large LCD display of AC voltage,
current, frequency and status of
lightning arrester
M810G
Intelligent battery monitoring
Visual and audible alarms
Features
Wide AC input range from 260V to
530Vac
System efficiency up to 93%
Rectifier can output 50% power in
phase-missing conditions
Hot swappable rectifier and
monitoring module
Front access, top / bottom cable entry
Remote monitoring through RJ45,
RS232 and replay output
Introduction
NetSure 801 power system is a new generation of highly reliable power system
designed by Emerson. The system can be smoothly expanded up to 6000A through
parallel connection. It is applicable for following applications:
Large and medium switching office
Level-1 transmission backbone line
GSM mobile switching office, mobile tandem exchange
CDMA mobile switching office, mobile tandem exchange
Rectifier Module R48-5800
General
Safety
CE,UL EN60950: 1992,UL1950
EMC
EN55022 Class B
Enclosure
IP20
MTBF
> 390000 hours
Input Characteristics
System Configuration
Range
Unit
Remark
V
Half power at 260
Voltage
260
Rectifier R48-5800
Monitor M810G
Line Frequency
45
Power Factor
0.99
Easily expandable with more power or
feature when new demand arise
AC Distribution Cabinet (PD380/400AFH-6, PD380/630AFH-6, PD380/630AFA-6)
DC Distribution Cabinet (PD48/1600DF-6, PD48/2500DF-6, PD48/2000HF-6/X1)
Rectifier Cabinet (Rack1000-6, Rack2000-6)
THD
5%
System Electrical Specifications
Input Voltage Range
Input Frequency Range
Power Factor
Efficiency
Nominal Output Voltage
260
45
DC emergency lighting available in
case of mains failure
Expandable up to 5 AC cabinets
R48-5800
Output Power
Surge protection on AC,DC and signal
side
Utilize CE/UL approved rectifier
R48-5800
System comply with EN60590 and
EN300386, ROHS
Visual and audible alarm
Two mains auto/manual switchover
Front access, top / bottom cabling
530Vac (half power at 260
65Hz
0.99
304Vac)
530Vac
65
Lightning proof and electrical
insulation in compliance with IEC
standard, ROHS compliant
100%
304Vac
50%
Hz
Output Characteristics
Range
Unit
Remark
Voltage
-42
Vdc
100%
Current
0
A
50%
Power
5800
W
100A@-58V
Power Density
0.813
W/cm 3
Size used: 85H 224W 371D
Efficiency
93%
40% 100% load
Peak to peak noise
50
mV
0
Psophometric weighted noise
0.5
mV
(300
260
304
530
Output Power VS Input Voltage
50% 110% load
122
Output Power
Temperature
-40
0
40
60
Output Power VS Temperature
20MHz
3400Hz)
93%
-42Vdc
Load Sharing
-58Vdc
Rectifier Cabinet Configuration
1%
Rack1000-6
Rack2000-6
M810G
0
1
R48-5800
1
10
M810G
0
1
R48-5800
1
20
*Note: One M810G supports up to 60 R48-5800 rectifiers.
Environmental
NetSure 801 Series DC Power System
Operating Temperature
-10
+65
(derating from 45
)
Model
HxWxD(mm)
Rack1000-6
2000
600
600
600
600
Relative Humidity
95% RH
Rack2000-6
2000
Elevation
4200m
R48-5800
88
M810G
87.5
Storage Temperature
-40
+70
244
372
243.5
Weight (kg)
161
2
Remark
150
Not including rectifiers
180
Not including rectifiers
7.8
PD380/400AFH-6/X1 PD380/630AFH-6/X1 PD380/630AFA-6/X1
AC Input
AC Output
DCEmergency
Output
3 phase / 5 line
3 phase / 5 line
3 phase / 5 line
Manual switchover
Manual switchover
Automatic switchover
400A/3Px2
630A/3Px2
630A/3Px2
4
160A/3P(MCCB)
6
160A/3P(MCCB)
6
160A/3P(MCCB)
1
63A/3P(MCB)
1
63A/3P(MCB)
1
63A/3P(MCB)
1
32A/3P(MCB)
1
32A/3P(MCB)
1
32A/3P(MCB)
3
32A/1P(MCB)
3
32A/1P(MCB)
3
32A/1P(MCB)
3
20A/1P(MCB)
3
20A/1P(MCB)
3
20A/1P(MCB)
100A/48V
100A/48V
100A/48V
Input Voltage
0
-58
Input / Output Specifications
Including faceplate
Rack 1000-6
Rack 2000-6
Mechanical Specifications
Model
H x W x D(mm)
PD380/400AFH-6/X1
2000
800
600
Weight(kg)
240
PD380/630AFH-6/X1
2000
800
600
260
PD380/630AFA-6/X1
2000
800
600
300
DC Distribution Cabinet
Features
Built-in CPU, independent monitoring
Backlit large LCD display of DC status
Visual and audible alarm
Input / Output Specifications
PD48/1600DF-6/X1
PD48/2500DF-6/X1
PD48/2000HF-6/X1
Battery fuse
2
1000A(NT4)
2
1000A(NT4)
2
DC Output
6
500A(NT3)
8
630A(NT3)
120
Front access, top / bottom cabling
2
200A (NT2)
4
400A (NT2)
(High ohmic
Visual and audible alarm
Expandable up to 8 DC cabinets
Lightning proof and electrical
insulation in compliance with IEC
standard, ROHS compliant
8
100A (NT00)
4
200A (NT2)
distribution,30m )
6
63A(NT00)
8
100A(NT00)
6
63A(NT00)
1000A(NT4)
10A (MCB)
Mechanical Specifications
Model
H x W x D(mm)
PD48/1600DF-6/X1
2000
800
600
Weight(kg)
280
PD48/2500DF-6/X1
2000
800
600
320
PD48/2000HF-6/X1
2000
800
600
270
Emerson Network Power Co., Ltd.
No. 1 Kefa Rd., Science & Industry Park,
Nanshan District 518057, Shenzhen China
T: 86-755-86010808
F: 86-755-86010909
Emerson Network Power
The global leader in enabling business-critical continuity.
AC Power
Embedded Computing
Connectivity
DC Power
www.emersonnetworkpower.com.cn
www.emersonpower.com.cn
Outside Plant
Racks and Integrated Cabinets
Embedded Power
Power Switching & Controls
Services
Monitoring
Precision Cooling
Surge Protection
Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co.
E-X6210599-0807
C
2007 Emerson Electric Co.
DC Power System
Benefits
z
Rectifier module adopts DSP technol-
z
ogy power density up to 15.8W/in3
Wide input voltage range (85 to 290
Vac), adaptable to various grids
z
Front access and space efficient. System can be positioned next to wall
z
Intelligent battery management func-
PS48600-3/2900-X5
PS48400-3/2900-X5 Medium
System
tion that expands lifetime
z
Hot swap and online manitenance
Emerson Network Power has developed PS48600-3/2900, PS48400-3/2900
medium power system with many years' R&D and operation experiences. The
system adopts DSP technology, completely meeting demands of customers
worldwide with high reliability, high efficiency and high performance.
The system includes 2series products: PS48600-3/2900 2m cabinet, including 12
rectifiers of total capacity up to 600A; PS48400-3/2900 1.6m cabinet, including 8
rectifiers of total capacity up to 400A. The rectifier is equipped with high
efficiency, high reliability, super-low radiation and easy maintenance and fully
meets -48Vdc power demands of medium and large mobile base stations,
medium exchanges, transmission relay stations, microwave communications
stations and satellite communications stations
Applications
PS48600-3/2900-X5
z
2G, 3G mobile base stations
z
z
Medium exchanges, rural telecom networks and access networks
Transmission relay stations
z
Microwave/satellite communications stations
Key Features
PS48400-3/2900-X5
6
z
Rectifier module adopts DSP technology with efficiency up to 93% and power density of 15.8W/in3
z
In compliance with international standards such as CE and applicable for residential environment
z
Wide input voltage range (85 to 90Vac), adaptable to poor electric power
z
Rectifier module can operate in an environment of 65
z
Rectifier ID identifying function, convenient for customer assets management
z
z
Digitized current sharing technology with high stability and precision up to 3%
Intelligent battery management function that expands lifetime
z
Complete AC, DC and signal port lightning proof
z
Highly intelligent in monitoring and remote control
z
Hot swap and online manitenance
Business-Critical Continuity
M500F Monitoring Module
M500F monitoring module adopts built-in Intel 80386EX CPU as main controller, RTOS(Real Time
Operation System) as operation system. The system not only collects, processes and transmits
monitoring data of power distribution and rectifying, but also intelligently manages battery based on
Monitoring Module
M500F
these data.
R48-2900 Rectifier Module
Based on power system maintenance requirements, rectifying module adopts world-leading power
and electronics technology and DSP technology with built-in advanced microprocessor, unique heat
exchange design combining both natural cooling and forced cooling and soft switch technology
AC Distribution
Two 100A mains inputs in manual switchover mode
As high as 40kA(8/20
s) lightning strike endurable
Rectifying Module
R48-2900
DC Distribution
Load low voltage disconnection protection (optional) and battery low voltage disconnection
protection; both fuse and MCB available for DC output protection
Dimensions And Weight
Model
W
D
H(mm)
Weight(Kg)
PS48600-3/2900-X5
600 600 2000
162(Rectifier included)
PS48400-3/2900-X5
600 600 1600
147(Rectifier included)
DC Distribution
7
DC Power System
Benefits
z
Reliable operation in rural environ-
PS4875/25 Small System
ments- where AC conditions are harsh
z
Easy to expand because of hot-swap
rectifier modules
z
Wall-mount style saves room space
PS4875/25 is wall mounted one cabinet system integrated with AC and DC
distribution units, and can provide up to 75A for -48Vdc. This system is based
upon HD4825-3 rectifier module, which offers high power density, high
efficiency, and accurate load sharing between rectifier modules. Systems are
monitored and controlled by PSM-A10 which offers RS232 and dry contact
interface, and can connect with modem or PSNA card to realize remote
monitoring
PS4875/25 is optimized for fiber repeater station power applications. This
system offers advanced features including intelligent battery monitoring,
remote monitoring and low voltage disconnection. This is suitable choice for
installation in region with poor AC regulation. In addition, there is AC surge
protection provided in the AC distribution unit
Applications
PS4875/25
14
z
Data Center
z
Small Telecom Exchanges
z
Amplifier Sites
z
Fiber Repeater
Key Features
z
Providing up to 75A in one cabinet
z
Full current available to -58Vdc
z
Wide input voltage window and enhanced AC surge protection
z
Front access design for easy installation and maintenance
z
z
Optional Priority load function to support critical load functions
LCD display for alarm and components status
z
Optional remote monitor and control
Business-Critical Continuity
PSM-A10 Controller
PSM-A10 is a microprocessor based monitoring and control unit that is used in PS4875/25 power
system. This unit has been specifically developed to provide monitoring, management and indication for DC power system. LCD front display and keyboard provide the system operational condition,
Monitoring Module
PSM-A10
setting and control. RS232 provides connectivity for remote monitoring via modem or PSNA card, at
the same time, dry contact can also provide remote alarms for system. Multi-level password access
is provided for safety operation
HD4825-3 Rectifier Module
The rectifiers are rated 25A and deliver 1450W at 58Vdc. The rectifier has adaptation power limiting
control mode to ensure sufficient output even when the input voltage is low. The rectifiers also have
advanced short circuit feedback protection. When the output short circuits, the rectifier output
current will feed back to a 1/3 rated current. The rectifier uses analog current sharing technology.
When the monitoring module or a rectifier module fails, the other rectifiers will maintain the current
sharing function. The rectifier has a built-in CPU for monitoring and controlling operation and for
Rectifier Module
HD4825-3
communicating with monitoring module
AC Distribution
The systems have one AC mains input which is 63A, 1 phase / 3 line system. At the same time, systems
integrate with surge protection in AC distribution units
DC Distribution
DC distribution units can provide 2 battery fuses and LVD function. The output branches are equipped
with short circuit and over current protection and branch capacity can be adjusted to requirements
Dimensions And Weight
Model
PS4875/25
W
450
D
H(mm)
260
700
Weight(Kg)
40(Rectifier included)
15
DC Power Systems
for Business-Critical Continuity
PS48300/1800
Integrative DC Power Series
-48VDC
up to 17.4kW
Introduction
PS48300/1800 system is optimized for base station power application. This
system offers advanced features, DSP control technology, intelligent battery
monitoring, remote monitoring and low voltage battery disconnection. The
system comes fully equipped with integrated AC and DC distribution.
Cost-effective for possible demand and future-proof, flexible and scalable
system that can be configured to meet current demand and future
expansion.
Features
Provide up to 17.4kW Max
Front access design for installation
and maintenance
Wide input voltager range from
85Vac to 300Vac
Wide working temperature:-40
+70
Work in poor electric power
environment
Rectifiers adopt DSP control
technology, wtih high power density
Low voltage battery disconnection
to protect batteries
Easily expandable with more power
or/and feature when new demand
arise
Self-contained surge protection for
AC,DC and signal
Hot swap of rectifier and monitoring
modules
Utilize CE/UL approved rectifier R481800A
PS48300/1800
System Electrical Specifications
Nominal Input Votage
Nominal Output Votage
Input Votage Range
Frequency Range
Output Power(max)
380Vac/220Vac(3 phase/1 phase)
-48Vdc
85-300Vac(Line-neutral), power decrease linearly below 176Vac
45 - 65Hz
17.4kW
AC Distribution
Input
Output
X1,X3 System
2 100A/3P (manual switchover)
1 16A/3P 3 16A/1P
X2 System
1 63A/4P (Single input)
None
X6 System
1 63A/4P(Single input)
1 16A/3P,1 16A/1P
DC distribution
X1,X2,X3 System
2 250A
12 Output
5 100A(Fuse)
1 63A/1P(MCB)
2 63A/1P,2 32A/1P(MCB)
2 10A/1P(MCB)
Battery Fuse
DC Output
LLVD
BLVD
Mechanical Parameters
X1,X6 System
X2,X3 System
600W
600W
600D 1600H(mm)
600D 2000H(mm)
PS48300/1800-X2
PS48300/1800-X3
X6 System
2 250A
7 Output
3 100A (Fuse)
2 32A/1P (MCB)
2 10A/1P (MCB)
130kg (excluding rectifiers and SCU)
150kg (excluding rectifiers and SCU)
PS48300/1800-X1
MCB
MCB
PS48300/1800
DC Power Systems
for Business-Critical Continuity
M500D Monitoring module
Features
Intelligent batterymanagement
Visual and audible alarms
Alarm history log
RS232/Modem, User configurable digital inputs
Hot Swapable and dry contacts
M500D Monitoring Module
R48-1800A Rectifier module
General
Safety
EMC
Dimensions
Weight
Enclosure
Input characteristics
Voltage
Line frequency
Power Factor
Efficiency
CE, UL UL/ EN/ IEC 60950-2000
EN 55022 Class B
87.9 85.3 272mm H W D
2.0kg
IP 20
Specification
85 300 power decrease linearly below 176Vac
45 65
0.99
91
Output characteristics
Voltage
Power
Current
Load regulation
Line regulation
Load share
Peak to peak noise
Psophometric weighted noise
THD
Specification
-42 -58
1740
0 33
0.5
0.1
0.9
100
2
5
Unit
Vac
Hz
Remark
Single phase
R48-1800A Rectifier module
%
Unit
Vdc
W
A
%
%
A
mV pk-pk
mV
%
Environment conditions
Operating temperature
Storage temperature
Relative humidity
Elevation
Remark
Rectifier output power and
input voltage relationship
30A@-58V
Output power
100%
(0 - 20 MHz)
Specification
-40
+70 (full power to +45
- 40 + 70
90% RH
2000 m
20%
0 85
300 Input voltage(V)
176
)
Output Current and Output
voltage relationship
Output voltage
Protection characteristics
Short circuit protection at constant current
Output over-voltage protection, voltage set point selectable
Input over-voltage protection, automatically recoverable
Input under-voltage protection, automatically recoverable
Over-temperature protection , > 98 protection, automatically recover
Emerson Network Power.
The global leader in enabling
business-critical continuity.
Emerson Network Power Co., Ltd.
No. 1 Kefa Rd., Science & Industry Park
Nanshan District 518057, Shenzhen, China
Phone: +86-755-8601-0808
Fax:
+86-755-8601-0909
www.emersonnetworkpower.com.cn
www.emersonpower.com.cn
58
48.3
0
30
33 Output current (A)
AC Power
Embedded Computing
Outside Plant
Racks and Integrated Cabinets
Connectivity
Embedded Power
Power Switching&Controls
Services
DC Power
Monitoring
Precision Cooling
Surge Protection
Emerson Network Power and the Emerson
Network Power logo are trademarks and
service marks of Emerson Electric Co.
2007 Emerson Electric Co.
2007.06
DC Power System
Benefits
z
Reliable operation in rural environ-
PS24600/75 Medium System
ments- where AC conditions are
harsh.
z
Easy to expand because of hot-swap
rectifier modules
PS24600/75 is one cabinet system integrated with AC and DC distribution units,
and can provide up to 600A for +24 Vdc. This system is based upon HD2475-2
rectifier module, which offers high power density, high efficiency, and accurate
load sharing between rectifier modules. Systems are monitored and controlled
by PSM-A 11which offers RS232 and dry contact interface, and can connect
with modem or PSNA card to realize remote monitoring
PS24600/75 is optimized for common fixed line and mobile switch applications.
This system offers advanced features including priority load function,
intelligent battery monitoring, remote monitoring and low voltage
disconnection. This is a suitable choice for installation in region with poor AC
regulation. In addition, there is AC surge protection provided in the AC
distribution unit
Applications
z
Base Transceiver Stations( BTS)
z
Data Center
Medium Telecom Exchanges
z
Key Features
PS24600/75
16
z
Providing up to 600A in one cabinet
z
Full current available to +24V
z
Wide input voltage window and enhanced AC surge protection
z
Front access design for easy installation and maintenance
z
Priority load function to support critical load functions
z
LCD display for alarm and components status
z
Optional remote monitor and control
Business-Critical Continuity
PSM-A11 Controller
PSM-A11 is a microprocessor based monitoring and control unit that is used in PS24600/75 power
system. This unit has been specifically developed to provide monitoring, management and indication
for DC power system. LCD front display and keyboard provide the system operational condition,
setting and control. RS232 provides connectivity for remote monitoring via modem or PSNA card, at
the same time, dry contact can also provide remote alarms for system. Multi-level password access
Monitoring Module
PSM-A11
is provided for safety operation
HD2475-2 Rectifier Module
The rectifiers are rated 75A and deliver 2175W at 29Vdc The rectifier has adaptation power limiting
control mode to ensure sufficient output even when the input voltage is low. The rectifiers also have
advanced short circuit feedback protection. When the output short circuits, the rectifier output
current will feed back to a 1/3 rated current. The rectifier uses analog current sharing technology.
When the monitoring module or a rectifier module fails, the other rectifiers will maintain the current
sharing function. The rectifier has a built-in CPU for monitoring and controlling operation and for
communicating with monitoring module
Rectifier Module
HD2475-2
AC Distribution
The systems have one AC mains input which is 63A, 3 phase / 5 line system. At the same time, systems
integrate with surge protection in AC distribution units
DC Distribution
DC distribution units can provide 2 battery fuses and LVD function. The output branches are equipped
with short circuit and over current protection and branch capacity can be adjusted to requirements
Dimensions And Weight
Model
PS24600/75
W
600
D
600
H(mm)
2000
Weight(Kg)
225(Rectifier included)
AC,DC Distribution
17
DC Power Systems
for Business-Critical Continuity
PS48120/1800
Integrative DC Power Series
-48VDC
up to 6.96kW
Features
Provide up to 6.96kW Max
Front access design for installation
and maintenance
Wide input voltager range from
85Vac to 300Vac
Wide working temperature of
rectifier module:-40
+70
Work in poor electric power
environment
Rectifiers adopt DSP control
technology, wtih high power density
Low voltage battery disconnection
to protect batteries
Easily expandable with more power
or/and feature when new demand
arise
Self-contained surge protection for
AC,DC and signal
Hot swap of rectifier and monitoring
modules
Utilize CE/UL approved rectifier R481800A
DPC48-3
Introduction
PS48120/1800 system is optimized for access, transmission, railway station,
wireless base station power application. This system offers advanced
features, DSP control technology, intelligent battery monitoring, remote
monitoring and low voltage battery disconnection. The system comes fully
equipped with integrated AC and DC distribution.
Cost-effective for possible demand and future-proof, flexible and scalable
system that can be configured to meet current demand and future expansion.
DPC48-3 can be selected for 6V,12V,24V output.
PS48120/1800
System Electrical Specifications
Nominal Input Votage
Nominal Output Votage
Input Votage
Frequency Range
Output Power(max)
220Vac/1 phase
-48Vdc
85V-300Vac , two-way input, switched manually (X1, X6 System)
125V-285Vac , two-way input, switched automatically (X2 System)
45 - 65Hz
6.96kW
AC Distribution
Input
Rectifier MCB
Output
2 63A/2P
4 16A/1P
1 16A/1P
DC distribution
Battery
DC Output 7 Output
DC/DC Converter DPC48-3
Input voltage range:
Output voltage(Nominal):
Output voltage range:
Output power:
X1,X2 System (None in X6 System)
X2 System (None in X1, X6 System)
Remark
Fuse
MCB
FUSE
100A 2
1 63A/1P 2 32A/1P 1 10A/1P
1 100A NT00,1 50A NT00,1 6A NT00
43VDC-60VDC
24V,12V,6V
22-28.5V,11-14.2V,5.5-7.1V
6V
12V
0W
0W
30W
100W
60W
200W
24V
0W
100W
200W
Notes: 1. 3 output voltage can be choosed discretionarily.
2. Only one output power can be choosed for each output voltage.
Mechanical Parameters
X1, X6 System
X2 System
PS48120/1800
600W 600D 2000H(mm)
600W 600D 2000H(mm)
110kg (excluding rectifiers and SCU)
120kg (excluding rectifiers and SCU)
PS48120/1800
DC Power Systems
for Business-Critical Continuity
M500D Monitoring module
Features
Intelligent batterymanagement
Visual and audible alarms
Alarm history log
RS232/Modem, User configurable digital inputs
Hot Swapable and dry contacts
M500D Monitoring Module
R48-1800A Rectifier module
General
Safety
EMC
Dimensions
Weight
Enclosure
Input characteristics
Voltage
Line frequency
Power Factor
Efficiency
CE, UL UL/ EN/ IEC 60950-2000
EN 55022 Class B
87.9 85.3 272mm H W D
2.0kg
IP 20
Range
85 300
45 65
0.99
91
Output characteristics
Voltage
Power
Current
Load regulation
Line regulation
Load share
Peak to peak noise
Psophometric weighted noise
THD
power decrease linearly below 176Vac
Unit
Vac
Hz
Comments
Single phase
R48-1800A Rectifier module
%
-42 -58
1740
0 33
0.5
0.1
0.9
100
2
5
Vdc
W
A
%
%
A
mV pk-pk
mV
%
Rectifier output power and
input voltage relationship
30A@-58V
Output power
100%
(0 - 20 MHz)
20%
0 85
Environment conditions
Operating temperature
Storage temperature
Relative humidity
Elevation
-40
+70
- 40 + 70
90% RH
2000 m
(full power to +45
300 Input voltage(V)
176
)
Output Current and Output
voltage relationship
Output voltage
Protection characteristics
Short circuit protection at constant current
Output over-voltage protection, voltage set point selectable
Input over-voltage protection, automatically recoverable
Input under-voltage protection, automatically recoverable
Over-temperature protection , > 98 protection, automatically recover
Emerson Network Power.
The global leader in enabling
business-critical continuity.
Emerson Network Power Co., Ltd.
No. 1 Kefa Rd., Science & Industry Park
Nanshan District 518057, Shenzhen, China
Phone: +86-755-8601-0808
Fax:
+86-755-8601-0909
www.emersonnetworkpower.com.cn
www.emersonpower.com.cn
58
48.3
0
30
33 Output current (A)
AC Power
Embedded Computing
Outside Plant
Racks and Integrated Cabinets
Connectivity
Embedded Power
Power Switching&Controls
Services
DC Power
Monitoring
Precision Cooling
Surge Protection
Emerson Network Power and the Emerson
Network Power logo are trademarks and
service marks of Emerson Electric Co.
2007 Emerson Electric Co.
2007.06
DC Power System for
Business-Critical Continuity
PSC48150/25 DC-DC Power System
+24Vdc/-48Vdc, 7.2kW
PSC48150/25 DC-DC power system
converts +24Vdc to -48Vdc for the
telecom switches and
base stations. The system adopts
advanced high-frequency switch
technology with excellent
reliability and performance.
Applications
System Composition
Model
PSC48150/25
DC/DCModule
C24/48-1200 2
6pcs
DC-DC Converter Module
Input Features
Input voltage
Max. input current
Output Features
Output DC voltage
Output current
Max. output power
Rating power
Alarm Functions
Over/Under voltage in input/output
Three independent dry-contact ports or DB9 port(for Huawei application only)
Applicable to 24Vdc power systems
in base stations, medium and small
switches, satellite
communications, data
communications and electric power
industry
BTS +24Vcd
BTS -48Vcd
Features
Wide DC input voltage range: 21V to 29V
Hot-swappable DC-DC converter. Plug
and play with on-line replacement of
less than 1 min
Extremely low radiation, meeting
standard of EN300386 CLASS B
Dry-contact output for alarm port,
simple and universally-applicable
Complete lightning proof in input and
output rated at 5KA(8/20us)
Complete fault protection functions
Distribution Cabinet
Distribution Cabinet 1pc
DC/DC
Converter
21 29Vdc
70A
-52 -56Vdc
0 25A
1200W
89%
PSC48150/25 DC-DC Power System
DC Power System for
Business-Critical Continuity
Input Distribution
Parameters
Nominal Input Voltage
Input voltage
Input MCCB
Indices
+24Vdc
21 29Vdc
160A
Output Distribution
Parameters
Output voltage range
Max. output power
Output routes
Indices
-52 -56Vdc
7200W
MCB 100A 1
80A
1
32A
2
Mechanical Parameters
Omponents
DC-DC converter
Cabinet
Dimensions(H W
132.5 85.5 287
1460 200 400
Dmm)
Weight
2.5kg
45kg
Installation Dimensions
90
144.5
400
281.5
195.5
5- 17
100
200
Front Panel Of The Cabinet
Cabinet Base Installation Dimensions
Emerson Network Power.
The global leader in enabling
business-critical continuity.
Emerson Network Power Co.
No. 1 Kefa Rd ., Scie nce & Ind ustr y Park
Nanshan District 518057, Shenzhen, China
Phone: +86-755-8601-0808
Fax:
+86-755-8601-0909
www.emersonnetworkpower.com.cn
www.emersonpower.com.cn
AC Power Systems
Embedded Power
Outside Plant
Connectivity
Inbound Power
Precision Cooling
DC Power Systems
Integrated Cabinet Solutions
Site Monitoring and Services
2006.4