SCIENTIFIC
Student Safety Contract
School Name___________________________________ Teacher______________________
PURPOSE
Science is a hands-on laboratory class.
You will be doing many laboratory activities which require the use of hazardous
chemicals. Safety in the science classroom
is the #1 priority for students, teachers, and
parents. To ensure a safe science classroom,
a list of rules has been developed and provided to you in this student safety contract.
These rules must be followed at all times.
Two copies of the contract are provided. One
copy must be signed by both you and a parent or guardian before you can participate
in the laboratory. The second copy is to be
kept in your science notebook as a constant
reminder of the safety rules.
GENERAL RULES
1.Conduct yourself in a responsible manner at all times in the laboratory.
2.Follow all written and verbal instructions carefully. If you do not understand
a direction or part of a procedure, ask the
instructor before proceeding.
3. Never work alone. No student may work
in the laboratory without an instructor
present.
4.When first entering a science room, do
not touch any equipment, chemicals, or
other materials in the laboratory area
until you are instructed to do so.
5.Do not eat food, drink beverages, or
chew gum in the laboratory. Do not use
laboratory glassware as containers for
food or beverages.
6.Perform only those experiments authorized by the instructor. Never do anything
in the laboratory that is not called for
in the laboratory procedures or by your
instructor. Carefully follow all instructions, both written and oral. Unauthorized
experiments are prohibited.
7.Be prepared for your work in the laboratory. Read all procedures thoroughly
before entering the laboratory.
8.Never fool around in the laboratory.
Horseplay, practical jokes, and pranks
are dangerous and prohibited.
9.Observe good housekeeping practices.
Work areas should be kept clean and tidy
at all times. Bring only your laboratory
instructions, worksheets, and/or reports
to the work area. Other materials (books,
purses, backpacks, etc.) should be stored
in the classroom area.
10.Keep aisles clear. Push your chair under
the desk when not in use.
11. Know the locations and operating procedures, where appropriate, for all safety
equipment including first aid kit, eyewash station, safety shower, fire extinguisher, and fire blanket. Know where
the fire alarm and exits are located.
12. Always work in a well-ventilated area. Use
the fume hood when working with volatile substances or poisonous vapors. Never
place your head into the fume hood.
13.Be alert and proceed with caution at
all times in the laboratory. Notify the
instructor immediately of any unsafe
conditions you observe.
14.Dispose of all chemical waste properly.
Never mix chemicals in sink drains.
Sinks are to be used only for water and
those solutions designated by the instructor. Solid chemicals, metals, matches,
filter paper, and all other insoluble materials are to be disposed of in the proper
waste containers, not in the sink. Check
the label of all waste containers twice
before adding your chemical waste to the
container.
15.Labels and equipment instructions must
be read carefully before use. Set up and
use the prescribed apparatus as directed
in the laboratory instructions or by your
instructor.
16. Keep hands away from face, eyes, mouth
and body while using chemicals or preserved specimens. Wash your hands
with soap and water after performing
all experiments. Clean all work surfaces
and apparatus at the end of the experiment. Return all equipment clean and in
working order to the proper storage area.
17.Experiments must be personally monitored at all times. You will be assigned
a laboratory station at which to work.
Do not wander around the room, distract
other students, or interfere with the laboratory experiments of others.
18.Students are never permitted in the
science storage rooms or preparation
areas unless given specific permission
by their instructor.
19.Know what to do if there is a fire drill
during a laboratory period; containers
must be closed, gas valves turned off,
fume hoods turned off, and any electrical
equipment turned off.
20.Handle all living organisms used in a
laboratory activity in a humane manner.
Preserved biological materials are to
be treated with respect and disposed of
properly.
21.When using knives and other sharp
instruments, always carry with tips and
points pointing down and away. Always
cut away from your body. Never try to
catch falling sharp instruments. Grasp
sharp instruments only by the handles.
22.If you have a medical condition (e.g.,
allergies, pregnancy, etc.), check with
your physician prior to working in lab.
CLOTHING
23.Any time chemicals, heat, or glassware
are used, students will wear laboratory
goggles. There will be no exceptions to
this rule!
24.Contact lenses may be worn provided
adequate face and eye protection is provided by specially marked, non-vented
safety goggles. The instructor should
know which students are wearing contact lenses in the event of eye exposure
to hazardous chemicals.
25.Dress properly for lab activities. Long
hair, dangling jewelry, and loose or
baggy clothing are hazardous. Long hair
must be tied back and dangling jewelry
and loose or baggy clothing must be
secured. Shoes must completely cover
the foot. No sandals allowed.
26.Lab aprons have been provided for your
use and should be worn during laboratory activities.
ACCIDENTS AND INJURIES
27.Report any accident (spill, breakage,
etc.) or injury (cut, burn, etc.) to the
instructor immediately, no matter how
trivial it may appear.
28. If you or your lab partner are hurt, immediately yell out “Code one, Code one” to
get the instructor’s attention.
29.If a chemical splashes in your eye(s) or
on your skin, immediately flush with
running water from the eyewash station
or safety shower for at least 20 minutes.
Notify the instructor immediately.
30. When mercury thermometers are broken,
mercury must not be touched. Notify the
instructor immediately.
HANDLING CHEMICALS
31.All chemicals in the laboratory are to
be considered dangerous. Do not touch,
taste, or smell any chemicals unless specifically instructed to do so. The proper
technique for wafting chemical vapors
will be demonstrated to you.
32.Check the label on chemical bottles
twice before removing any of the contents. Take only as much chemical as
you need.
© 2017 Flinn Scientific, Inc. All Rights Reserved. Reproduction permission is granted to science teachers who are customers of Flinn Scientific, Inc. Batavia, Illinois, U.S.A. No part of this material may be reproduced or
transmitted in any form or by any means, electronic or mechanical, including, but not limited to photocopy, recording, or any information storage and retrieval system, without permission in writing from Flinn Scientific, Inc.
IN10494
Student Safety Contract
Continued
SCIENTIFIC
33.Never return unused chemicals to their
original containers.
34.Never use mouth suction to fill a pipet.
Use a rubber bulb or pipet pump.
35.When transferring reagents from one
container to another, hold the containers
away from your body.
36.Acids must be handled with extreme
care. You will be shown the proper
method for diluting strong acids. Always
add acid to water, swirl or stir the solution and be careful of the heat produced,
particularly with sulfuric acid.
37. Handle flammable hazardous liquids over
a pan to contain spills. Never dispense
flammable liquids anywhere near an open
flame or source of heat.
38. Never remove chemicals or other materials from the laboratory area.
39.Take great care when transporting acids
and other chemicals from one part of
the laboratory to another. Hold them
securely and walk carefully.
HANDLING GLASSWARE
AND EQUIPMENT
40.Carry glass tubing, especially long
pieces, in a vertical position to minimize
the likelihood of breakage and injury.
41.Never handle broken glass with your
bare hands. Use a brush and dustpan to
clean up broken glass. Place broken or
waste glassware in the designated glass
disposal container.
42. Inserting and removing glass tubing from
rubber stoppers can be dangerous. Always
lubricate glassware (tubing, thistle tubes,
thermometers, etc.) before attempting to
insert it in a stopper. Always protect your
hands with towels or cotton gloves when
inserting glass tubing into, or removing it
from, a rubber stopper. If a piece of glassware becomes “frozen” in a stopper, take
it to your instructor for removal.
43.Fill wash bottles only with distilled
water and use only as intended, e.g., rinsing glassware and equipment, or adding
water to a container.
44.When removing an electrical plug from
its socket, grasp the plug, not the electrical cord. Hands must be completely
dry before touching an electrical switch,
plug, or outlet.
45.Examine glassware before each use.
Never use chipped or cracked glassware.
Never use dirty glassware.
46.Report damaged electrical equipment
immediately. Look for things such as
frayed cords, exposed wires, and loose
connections. Do not use damaged electrical equipment.
47.If you do not understand how to use a
piece of equipment, ask the instructor for
help.
48.Do not immerse hot glassware in cold
water; it may shatter.
HEATING SUBSTANCES
49.Exercise extreme caution when using a
gas burner. Take care that hair, clothing
and hands are a safe distance from the
flame at all times. Do not put any substance into the flame unless specifically
instructed to do so. Never reach over an
exposed flame. Light gas (or alcohol)
burners only as instructed by the teacher.
50.Never leave a lit burner unattended.
Never leave anything that is being heated
or is visibly reacting unattended. Always
turn the burner or hot plate off when not
in use.
51.You will be instructed in the proper
method of heating and boiling liquids
in test tubes. Do not point the open end
of a test tube being heated at yourself or
anyone else.
52.Heated metals and glass remain very
hot for a long time. They should be
set aside to cool and picked up with
caution. Use tongs or heat-protective
gloves if necessary.
53.Never look into a container that is being
heated.
54.Do not place hot apparatus directly on
the laboratory desk. Always use an insulating pad. Allow plenty of time for hot
apparatus to cool before touching it.
55.When bending glass, allow time for the
glass to cool before further handling.
Hot and cold glass have the same visual
appearance. Determine if an object is hot
by bringing the back of your hand close
to it prior to grasping it.
QUESTIONS
56. Do you wear contact lenses?
 YES  NO
57. Are you color blind?
 YES  NO
58. Do you have allergies?
 YES  NO
If so, list specific allergies___________
________________________________
AGREEMENT
I, _____________________________
__________________(student’sname)have
read and agree to follow all of the
safety rules set forth in this contract.
I realize that I must obey these rules
to ensure my own safety, and that of
my fellow students and instructors. I
will cooperate to the fullest extent with
my instructor and fellow students to
maintain a safe lab environment. I will
also closely follow the oral and written
instructions provided by the instructor.
I am aware that any violation of this
safety contract that results in unsafe
conduct in the laboratory or misbehavior on my part, may result in being
removed from the laboratory, detention, receiving a failing grade, and/or
dismissal from the course.
Student Signature
Date
Dear Parent or Guardian:
We feel that you should be informed
regarding the school’s effort to create
and maintain a safe science classroom/
laboratory environment.
With the cooperation of the instructors, parents, and students, a safety
instruction program can eliminate,
prevent, and correct possible hazards.
You should be aware of the safety
instructions your son/daughter will
receive before engaging in any laboratory work. Please read the list of safety
rules above. No student will be permitted to perform laboratory activities
unless this contract is signed by both
the student and parent/guardian and is
on file with the teacher.
Your signature on this contract indicates that you have read this Student
Safety Contract, are aware of the
measures taken to ensure the safety
of your son/daughter in the science
laboratory, and will instruct your son/
daughter to uphold his/her agreement
to follow these rules and procedures
in the laboratory.
Parent/Guardian Signature
Date
© 2017 Flinn Scientific, Inc. All Rights Reserved. Reproduction permission is granted to science teachers who are customers of Flinn Scientific, Inc. Batavia, Illinois, U.S.A. No part of this material may be reproduced or
transmitted in any form or by any means, electronic or mechanical, including, but not limited to photocopy, recording, or any information storage and retrieval system, without permission in writing from Flinn Scientific, Inc.
IN10494