LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 1 01.29.16
EcoSystemTM 5-Series LED Driver — 5 W to 75 W
EcoSystemTM 5-Series LED drivers provide a
high‑performance solution for any space, in any
application, while providing smooth, continuous
dimming down to 5% of full output current.
Features
•Continuous, flicker-free dimming from 100% to 5%1.
•Guaranteed dimming performance when used with
Lutron® controls.
•Guaranteed compatibility with Energi Savr NodeTM
units with EcoSystemTM, GRAFIK Eye® QS with
EcoSystemTM, PowPak® dimming module with
EcoSystemTM, and Quantum® systems, allowing for
integration into a planned or existing EcoSystemTM
lighting control solution.
•QwikFigTM compatible models available, see How to
Build a Model Number page for details. For more
information, please refer to the QwikFigTM User
Guide (Lutron® P/N 041473) or contact your Lutron
sales representative.
•Protected from miswires of input power to
EcoSystemTM control inputs up to 277 V~.
•A rated lifetime of 50,000 hours at 75 °C (167 °F)
calibration point (tc).
•Type TL Rated2.
•FCC Part 15 compliant for commercial applications
at 120—277 V ~2.
•100% performance tested at factory.
•RoHS compliant.
•Non-volatile memory restores all settings after power
failure.
•For more information please visit:
www.lutron.com/EcoSystem5Series
EcoSystemTM LED Driver, case type M
1.18 in (30 mm) W x 1.00 in (25 mm) H x 14.13 in (359 mm) L
EcoSystemTM Features
•Simpler to wire and more reliable than 0-10 V-.
•Guarantees compatibility between Lutron® controls,
drivers, and sensors.
•Accommodates zone changing without rewiring.
•Link to Lutron® Quantum® Total Light Management
System to monitor lighting power consumption.
1
2
Light output at 5% depends on the efficacy of the light engine used with the driver.
Does not include J, K, L, M, and N output ranges (preliminary spec).
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
1
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 2 01.29.16
Specifications
Regulatory Approvals
•Lutron® Quality Systems registered to ISO 9001.2008
•Manufacturing facilities employ ESD reduction
practices that comply with the requirements of
ANSI / ESD S20.20
•Meets ANSI C62.41 category A surge protection
standards up to and including 4 kV
•FCC Part 15 compliant for commercial applications at
120—277 V~4
•Meets UL® 8750, “Light Emitting Diode (LED)
Equipment for use in Lighting Products”4
•Type TL rated4
•Class 2 output4
•Meets LED driver requirements for
Energy Star version 1.2
Performance
•Dimming Range: 100% to 5%1
•Operating Voltage: 120—277 V~ at 50 / 60 Hz
•Lifetime: 50,000 hours when calibration point (tc) at
75 °C (167 °F)2
•For rated warranty, tc not to exceed 75 °C (167 °F)
(maximum rated temperature)2
•Patented thermal foldback protection
•LED lighting turns on to any dimmed level without
flashing to full brightness
•Non-volatile memory restores all driver settings after
power failure
•Typical standby power consumption: 0.2 W at 120 V~
and 0.3 W at 277 V~
•Open-circuit protected output
•Short-circuit and overload-protected output
•Device turn-on time: < 100 ms from electronic off and
< 500 ms from power off
•Class 2 output designed to withstand hot swap4
•Inrush current less than NEMA 410-2011 limit4
•Dimming method: constant-current reduction, refer to
Lutron® Application Note #360 for details
Environmental
•Sound rated: Class A inaudible in 24 dBA ambient
•Relative Humidity: maximum 90% non-condensing
•Minimum Operating Ambient Temperature:
t a = 0 °C (32 °F) 3
• Indoor use only
•Rated for dry and damp locations
Driver Wiring and Mounting
•Driver is grounded by a mounting screw to the
grounded fixture
•Terminal blocks on the driver accept one solid wire per
terminal from 18 AWG to 16 AWG
(0.75 mm2 to 1.5 mm2)
•Fixture must be grounded in accordance with local
and national electrical codes
•Maximum driver-to-LED light engine wire length for:
Maximum Lead Length
Wire Gauge
150 mA to
700 mA
710 mA to
1.50 A
1.51 A to
2.10 A
18 AWG (0.75 mm2)
30 ft (9 m)
15 ft (4.5 m)
10 ft (3 m)
(1.5 mm2)
35 ft (10.5 m)
25 ft (7.5 m)
15 ft (4.5 m)
14 AWG (2.5 mm2)
50 ft (15 m)
40 ft (12 m)
25 ft (7.5 m)
12 AWG (4.0 mm2)
100 ft (30 m)
60 ft (18 m)
40 ft (12 m)
16 AWG
* To use wire gauges larger than the terminal blocks’ rated gauge of
18 to 16 AWG (0.75 mm2 to 1.5 mm2), refer to Terminal Wiring Gauges
diagram. The 18 to 16 AWG (0.75 mm2 to 1.5 mm2) wires connected
to the driver should be less than 3 ft (0.9 m).
1
Light output at 5% depends on the efficacy of the light engine used with the driver.
To maintain warranty, installer is responsible for ensuring that the driver calibration point does not exceed 75 ºC (167 ºF).
3 Where t is the temperature of the air directly surrounding the driver.
a
4 Does not include J, K, L, M, and N output ranges (Preliminary Spec).
2
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
2
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 3 01.29.16
How to Select the Correct LED Driver for Your Load
1. Review the specifications of the LED load.
2. Identify the minimum and maximum operating voltage of the LED load at the desired operating current. This
“current” will be the rated output current of the LED driver. Consult the LED load manufacturer for any questions.
Example: An LED load that is rated at 1 A and 33 V nominally, has an output voltage range of 28 – 38 V (at
1 A) due to unit-to-unit variation, temperature, etc.
3. Determine the proper operating range of the LED driver.
a. Identify the output range(s) of the driver family that includes the desired current.
i. Select Current
Example: Only “B”, “C”, “U”, and “V” models meet the current range of the selected load (1 A).
LED Load Output Range
L = 0.15 – 0.32 A, 20–40 V-, 5-10 W
J = 0.15 – 0.30 A, 30–50 V-, 6-12 W
M= 0.25 – 0.50 A, 20–40 V-, 6.5-14 W
K = 0.24 – 0.50 A, 30–50 V-, 9-20 W
N = 0.35 – 0.75 A, 20–40 V-, 10-20 W
T = 0.40 – 0.83 A, 30–50 V-, 15-35 W
B = 0.50 – 1.25 A, 20–40 V-, 15-35 W
U = 0.70 – 1.33 A, 30–50 V-, 25-50 W
C = 0.88 – 1.75 A, 20–40 V-, 25-50 W
V = 1.00 – 1.88 A, 30–50 V-, 40-75 W
D = 1.25 – 2.10 A, 20–40 V-, 35-75 W
ii. Select Voltage
Example: Out of the 4 models indicated above, only “B” and “C” models meet the voltage requirement for
the selected load (28 – 38 V).
LED Load Output Range
L = 0.15 – 0.32 A, 20–40 V-, 5-10 W
J = 0.15 – 0.30 A, 30–50 V-, 6-12 W
M= 0.25 – 0.50 A, 20–40 V-, 6.5-14 W
K = 0.24 – 0.50 A, 30–50 V-, 9-20 W
N = 0.35 – 0.75 A, 20–40 V-, 10-20 W
T = 0.40 – 0.83 A, 30–50 V-, 15-35 W
B = 0.50 – 1.25 A, 20–40 V-, 15-35 W
U = 0.70 – 1.33 A, 30–50 V-, 25-50 W
C = 0.88 – 1.75 A, 20–40 V-, 25-50 W
V = 1.00 – 1.88 A, 30–50 V-, 40-75 W
D = 1.25 – 2.10 A, 20–40 V-, 35-75 W
continued on next page…
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
3
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 4 01.29.16
How to Select the Correct LED Driver for Your Load (continued)
b. Examine the Load Compatibility graphs below for each output range to ensure that the voltage range of the
LED load is within the safe operating area.
Example: L
ines marked below indicate load specifications (28 – 38 V at 1 A).
“B” Model (Not Compatible)

“C” Model (Compatible)
Since the maximum voltage of the load (38 V) exceeds the
allowable voltage of “B” model (35 V at 1 A), this model is
not compatible.
Load Compatibility
40
38 V
35
30
28 V
}
Operating
range of 1 A,
28 – 38 V load
25
20
15
0
0.35
0.70
1.05
1.40
Shaded area meets DLC Version 2.1 (areas outside of
shaded areas may not meet THD or PF requirements).
Constant 15 W output
Constant 35 W output
40
35
30
{
38 V
Operating
range of 1 A,
28 – 38 V load
28 V
25
20
15
0.35
1.75
Output Current (A)
Key:
Load Compatibility
45
Output Voltage (V)
Output Voltage (V)
45

Operating voltage range for “C” model is 25 – 40 V at 1 A. Since
the load specifications are within the operating range, “C” model
is compatible for this load.
0.70
1.05
1.40
1.75
2.10
Output Current (A)
Key:
Shaded area meets DLC Version 2.1 (areas outside of
shaded areas may not meet THD or PF requirements).
Constant 25 W output
Constant 50 W output
4. See How to Build A Model Number to create the appropriate model number for the desired driver. If a
QwikFigTM compatible driver is needed, identify the proper LED Load Output Range (voltage and current) and
insert “BLK” in the Current Level (for Constant Current) section of the model number.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
4
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 5 01.29.16
How to Build a Model Number (“BLK” models for use with Lutron® QwikFigTM
technology): EcoSystemTM 5-Series (up to 75 W) LED Driver
LD E5 _U1U M N -_ A _ _ _
Example: LDE53U1UMN-BA070
0.70 A, 15 – 28 W, 21.5 – 40 V- ** LED driver
For further assistance selecting your model
number, contact our LED Center of Excellence
at LEDs@lutron.com
LED Load Output Range
Class 2 Constant Current
L = 0.15 – 0.32 A, 20 – 40 V- *, 5 – 10 W
M = 0.25 – 0.50 A, 20 – 40 V- *, 6.5 – 14 W
N = 0.35 – 0.75 A, 20 – 40 V- *, 10 – 20 W
B = 0.50 – 1.25 A, 20 – 40 V- *, 15 – 35 W
C = 0.88 – 1.75 A, 20 – 40 V- *, 25 – 50 W
D = 1.25 – 2.10 A, 20 – 40 V- *, 35 – 75 W
J = 0.15 – 0.30 A, 30 – 50 V- *, 6 – 12 W
K = 0.24 – 0.50 A, 30 – 50 V- *, 9 – 20 W
T = 0.40 – 0.83 A, 30 – 50 V- *, 15 – 35 W
U = 0.70 – 1.33 A, 30 – 50 V- *, 25 – 50 W
V = 1.00 – 1.88 A, 30 – 50 V- *, 40 – 75 W
LED Load Power Range
1 = Use when LED Load Output Range is “J,” “L,” or “M”
2 = Use when LED Load Output Range is “K” or “N”
3 = Use when LED Load Output Range is “B” or “T”
5 = Use when LED Load Output Range is “C” or “U”
7 = Use when LED Load Output Range is “D” or “V”
Current Level (for Constant Current):
015 = 0.15 A: . . . 210 = 2.10 A
Option 1: Order a driver configured by Lutron to a
desired output current.
Example: LDE53U1UMN-BA070 has been
pre-configured at Lutron to an
output of 0.70 A. Refer to the
example above.
Note: LutronR pre-configured drivers are not
QwikFigTM compatible and cannot be
re-configured.
Option 2: Order a QwikFigTM compatible driver.
Example: LDE53U1UMN-BABLK (0.5 – 1.25 A)*
Note: Default set to minimum output current
for the respective LED Load Output Range.
Attention: Model numbers may appear similar to Lutron® Hi-lume ® A-Series drivers, but EcoSystemTM 5-Series drivers are not a direct model-for-model
replacement for Hi-lume ® A-Series drivers. Please note the driver’s output rating and the load ratings to select the correct product for your fixture.
Note: QwikFigTM bulk drivers are only available as UL® recognized. Does not include “J,” “K,” “L,” “M,” and “N” output ranges.
*Output voltage range changes with output current and according to power limits. Check driver specifications on following pages carefully to
understand output voltage range of a particular SKU. Purchaser is responsible for electrical compatibility between LED driver and LED load.
** Minimum voltage of LDE53U1UMN-BA070 limited by 15 W minimum power.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
5
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 6 01.29.16
“L” Output Range (preliminary spec)
Driver Type
Output Dimming
Method
Output
Voltage
Output
Current
Output
Power
Constant Current Driver
Constant Current
Reduction (CCR)
20—40 V-
0.15—0.32 A*
5—10 W
Standards
Recognition
—
Maximum Rated Temp.
@ tc for Warranty
75 ºC
* QwikFigTM compatible model number LDE51U1UMN-LABLK is configurable to any current within this range.
Load Compatibility
High End Load Compatibility & DLC Compliance
45
45
3535
Output Voltage (V)
Output Voltage (V)
4040
3030
2525
2020
1515
0.10
0.15
0.10
0.15
0.20
0.25
Output Current (A)
0.20
0.25
0.30
0.30
0.35
0.35
Output Current (A)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
6
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 7 01.29.16
“M” Output Range (preliminary spec)
Driver Type
Output Dimming
Method
Output
Voltage
Output
Current
Output
Power
Constant Current Driver
Constant Current
Reduction (CCR)
20—40 V-
0.25—0.50 A*
6.5—14 W
Standards
Recognition
—
Maximum Rated Temp.
@ tc for Warranty
75 ºC
* QwikFigTM compatible model number LDE51U1UMN-MABLK is configurable to any current within this range.
Load Compatibility
High End Load Compatibility & DLC Compliance
45
45
35
35
Output Voltage (V)
Output Voltage (V)
40
40
30
30
25
25
20
20
15
15
0.20
0.20
0.25
0.25
0.30
0.30
0.35
0.40
0.35 Current
0.40
Output
(A)
0.45
0.45
0.50
0.50
0.55
0.55
Output Current (A)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
7
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 8 01.29.16
“N” Output Range (preliminary spec)
Driver Type
Output Dimming
Method
Output
Voltage
Output
Current
Output
Power
Constant Current Driver
Constant Current
Reduction (CCR)
20—40 V-
0.35—0.75 A*
10—20 W
Standards
Recognition
—
Maximum Rated Temp.
@ tc for Warranty
75 ºC
* QwikFigTM compatible model number LDE52U1UMN-NABLK is configurable to any current within this range.
Load Compatibility
High End Load Compatibility & DLC Compliance
45
40
40
35
35
Output Voltage (V)
Output Voltage (V)
45
30
30
25
25
20
20
15
15
0.30
0.30
0.40
0.40
0.50
0.50
0.60
0.60
Output Current (A)
0.70
0.70
0.80
0.80
Output Current (A)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
8
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 9 01.29.16
“B” Output Range
Driver Type
Output Dimming
Method
Output
Voltage
Output
Current
Output
Power
Constant Current Driver
(Class 2)
Constant Current
Reduction (CCR)
20—40 V-
0.50—1.25 A*
15—35 W
Standards
Recognition
Maximum Rated Temp.
@ tc for Warranty
75 ºC
Type TL 84 ºC / 65 ºC
* QwikFigTM compatible model number LDE53U1UMN-BABLK is configurable to any current within this range.
Typical Performance Specifications:
Parameter
Value
Test Conditions
Input Current
0.15 A
Power Factor
0.96
Vi = 277 V~, t a = 25 °C, Io = 0.88 A, Vo = 40 V-,
Maximum Light Output
THD
15%
Driver Efficiency
85%
LDE53U1UMN-BA088
Typical Efficiency vs. Output Current
Load Compatibility
90
Efficiency at Pmax (%)
Output Voltage (V)
40
35
30
25
20
0.35
0.70
1.05
85
80
75
0.50
1.40
0.75
Key:
Shaded area meets DLC Version 2.1 (areas outside of
shaded areas may not meet THD or PF requirements).
Constant 15 W output
Constant 35 W output
Typical THD vs. Output Power
277 V~
Typical Power Factor vs. Output Power
Power Factor
THD (%)
120 V~
1.00
25
20
15
10
1.25
Output Current (A)
Output Current (A)
Key:
1.00
15
20
25
30
0.95
0.90
0.85
35
15
20
Output Power (W)
Key:
120 V~
®
Job Name:
Job Number:
277 V~
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
25
30
35
Output Power (W)
Key:
120 V~
277 V~
Page
9
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 10 01.29.16
“C” Output Range
Driver Type
Output Dimming
Method
Output
Voltage
Output
Current
Output
Power
Constant Current Driver
(Class 2)
Constant Current
Reduction (CCR)
20—40 V-
0.88—1.75 A*
25—50 W
Standards
Recognition
Maximum Rated Temp.
@ tc for Warranty
75 ºC
Type TL 80 ºC / 76 ºC
* QwikFigTM compatible model number LDE55U1UMN-CABLK is configurable to any current within this range.
Typical Performance Specifications:
Parameter
Value
Test Conditions
Input Current
0.21 A
Power Factor
0.97
Vi = 277 V~, t a = 25 °C, Io = 1.25 A, Vo = 40 V-,
Maximum Light Output
THD
13%
Driver Efficiency
88%
LDE55U1UMN-CA125
Typical Efficiency vs. Output Current
Load Compatibility
90
Efficiency at Pmax (%)
Output Voltage (V)
40
35
30
25
20
0.70
1.05
1.40
85
80
75
0.85
1.75
1.15
Key:
Shaded area meets DLC Version 2.1 (areas outside of
shaded areas may not meet THD or PF requirements).
Constant 25 W output
Constant 50 W output
Typical THD vs. Output Power
277 V~
1.00
Power Factor
THD (%)
120 V~
Typical Power Factor vs. Output Power
20
15
10
5
1.75
Output Current (A)
Output Current (A)
Key:
1.45
25
30
35
40
45
0.95
0.90
0.85
50
25
30
Output Power (W)
Key:
120 V~
®
Job Name:
Job Number:
277 V~
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
35
40
45
50
Output Power (W)
Key:
120 V~
277 V~
Page
10
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 11 01.29.16
“D” Output Range
Driver Type
Output Dimming
Method
Output
Voltage
Output
Current
Output
Power
Constant Current Driver
(Class 2)
Constant Current
Reduction (CCR)
20—40 V-
1.25—2.10 A*
35—75 W
Standards
Recognition
Maximum Rated Temp.
@ tc for Warranty
75 ºC
Type TL 82 ºC / 82 ºC
* QwikFigTM compatible model number LDE57U1UMN-DABLK is configurable to any current within this range.
Typical Performance Specifications:
Parameter
Value
Test Conditions
Input Current
0.31 A
Power Factor
0.95
Vi = 277 V~, t a = 25 °C, Io = 1.88 A, Vo = 40 V-,
Maximum Light Output
THD
13%
Driver Efficiency
89%
LDE57U1UMN-DA188
Typical Efficiency vs. Output Current
Load Compatibility
90
Efficiency at Pmax (%)
Output Voltage (V)
40
35
30
25
20
1.05
1.40
1.75
85
80
75
1.25
2.10
1.50
Key:
Shaded area meets DLC Version 2.1 (areas outside of
shaded areas may not meet THD or PF requirements).
Typical THD vs. Output Power
277 V~
1.00
Power Factor
THD (%)
120 V~
Typical Power Factor vs. Output Power
20
15
10
5
2.00
Output Current (A)
Output Current (A)
Key:
1.75
35
40
45
50
55
60
65
70
0.95
0.90
0.85
75
35
40
45
Output Power (W)
Key:
120 V~
®
Job Name:
Job Number:
277 V~
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
50
55
60
65
70
75
Output Power (W)
Key:
120 V~
277 V~
Page
11
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 12 01.29.16
“J” Output Range (preliminary spec)
Driver Type
Output Dimming
Method
Output
Voltage
Output
Current
Output
Power
Constant Current Driver
(Class 2)
Constant Current
Reduction (CCR)
30—50 V-
0.15—0.30 A*
6—12 W
Standards
Recognition
—
Maximum Rated Temp.
@ tc for Warranty
75 ºC
* QwikFigTM compatible model number LDE51U1UMN-JABLK is configurable to any current within this range.
Load Compatibility
High End Load Compatibility & DLC Compliance
55
50
50
45
45
Output Voltage (V)
Output Voltage (V)
55
40
40
35
35
30
30
25
25
0.10
0.10
0.15
0.15
0.20
0.25
0.25
0.20
Output Current
(A)
0.30
0.30
0.35
0.35
Output Current (A)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
12
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 13 01.29.16
“K” Output Range (preliminary spec)
Driver Type
Output Dimming
Method
Output
Voltage
Output
Current
Output
Power
Constant Current Driver
Constant Current
Reduction (CCR)
30—50 V-
0.24—0.50 A*
9—20 W
Standards
Recognition
—
Maximum Rated Temp.
@ tc for Warranty
75 ºC
* QwikFigTM compatible model number LDE52U1UMN-KABLK is configurable to any current within this range.
Load Compatibility
High End Load Compatibility & DLC Compliance
5555
4545
Output Voltage (V)
Output Voltage (V)
5050
4040
3535
3030
2525
0.20
0.20
0.25
0.25
0.30
0.30
0.35
0.35
0.40
0.40
Output Current (A)
0.45
0.45
0.50
0.50
0.55
0.55
Output Current (A)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
13
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 14 01.29.16
“T” Output Range
Driver Type
Output Dimming
Method
Output
Voltage
Output
Current
Output
Power
Constant Current Driver
(Class 2)
Constant Current
Reduction (CCR)
30—50 V-
0.40—0.83 A*
15—35 W
Standards
Recognition
Maximum Rated Temp.
@ tc for Warranty
75 ºC
Type TL 90 ºC / 64 ºC
* QwikFigTM compatible model number LDE53U1UMN-TABLK is configurable to any current within this range.
Typical Performance Specifications:
Parameter
Value
Test Conditions
Vi = 277 V~, t a = 25 °C, Io = 0.70 A, Vo = 50 V-,
Maximum Light Output
Input Current
0.15 A
Power Factor
0.96
THD
13%
Driver Efficiency
87%
LDE53U1UMN-TA070
Load Compatibility
Typical Efficiency vs. Output Current
90
Efficiency at Pmax (%)
Output Voltage (V)
50
45
40
35
30
0.25
0.50
0.75
85
80
75
0.40
1.00
0.50
Output Current (A)
Key:
Key:
Typical THD vs. Output Power
120 V~
277 V~
Typical Power Factor vs. Output Power
1.00
Power Factor
THD (%)
0.80
Constant 35 W output
20
15
10
5
0.70
Output Current (A)
Shaded area meets DLC Version 2.1 (areas outside of
shaded areas may not meet THD or PF requirements).
Constant 15 W output
0.60
15
20
25
30
0.95
0.90
0.85
35
15
20
Output Power (W)
Key:
120 V~
®
Job Name:
Job Number:
277 V~
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
25
30
35
Output Power (W)
Key:
120 V~
277 V~
Page
14
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 15 01.29.16
“U” Output Range
Driver Type
Output Dimming
Method
Output
Voltage
Output
Current
Output
Power
Constant Current Driver
(Class 2)
Constant Current
Reduction (CCR)
30—50 V-
0.70—1.33 A*
25—50 W
Standards
Recognition
Maximum Rated Temp.
@ tc for Warranty
75 ºC
Type TL 89 ºC / 64 ºC
* QwikFigTM compatible model number LDE55U1UMN-UABLK is configurable to any current within this range.
Typical Performance Specifications:
Parameter
Value
Test Conditions
Vi = 277 V~, t a = 25 °C, Io = 1.0 A, Vo = 50 V-,
Maximum Light Output
Input Current
0.21 A
Power Factor
0.97
THD
11%
Driver Efficiency
86%
LDE55U1UMN-UA100
Typical Efficiency vs. Output Current
Load Compatibility
90
Efficiency at Pmax (%)
Output Voltage (V)
50
45
40
35
30
0.50
0.75
1.00
1.25
1.50
85
80
75
0.70
0.80
Key:
Shaded area meets DLC Version 2.1 (areas outside of
shaded areas may not meet THD or PF requirements).
Constant 25 W output
Constant 50 W output
Typical THD vs. Output Power
1.20
1.30
120 V~
277 V~
1.00
Power Factor
THD (%)
1.10
Typical Power Factor vs. Output Power
20
15
10
5
1.00
Output Current (A)
Output Current (A)
Key:
0.90
25
30
35
40
45
0.95
0.90
0.85
50
25
30
Output Power (W)
Key:
120 V~
®
Job Name:
Job Number:
277 V~
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
35
40
45
50
Output Power (W)
Key:
120 V~
277 V~
Page
15
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 16 01.29.16
“V” Output Range
Driver Type
Output Dimming
Method
Output
Voltage
Output
Current
Output
Power
Constant Current Driver
(Class 2)
Constant Current
Reduction (CCR)
30—50 V-
1.00—1.88 A*
40—75 W
Standards
Recognition
Maximum Rated Temp.
@ tc for Warranty
75 ºC
Type TL 89 ºC / 88 ºC
* QwikFigTM compatible model number LDE57U1UMN-VABLK is configurable to any current within this range.
Typical Performance Specifications:
Parameter
Value
Test Conditions
Input Current
0.31 A
Power Factor
0.96
Vi = 277 V~, t a = 25 °C, Io = 1.5 A, Vo = 50 V-,
Maximum Light Output
THD
13%
Driver Efficiency
90%
LDE57U1UMN-VA150
Typical Efficiency vs. Output Current
Load Compatibility
95
Efficiency at Pmax (%)
Output Voltage (V)
50
45
40
35
30
1.00
1.25
1.50
1.75
2.00
90
85
80
1.00
1.25
Key:
Shaded area meets DLC Version 2.1 (areas outside of
shaded areas may not meet THD or PF requirements).
Constant 35 W output
Constant 75 W output
Typical THD vs. Output Power
277 V~
1.00
Power Factor
THD (%)
120 V~
Typical Power Factor vs. Output Power
20
15
10
5
1.75
Output Current (A)
Output Current (A)
Key:
1.50
40
45
50
55
60
65
70
0.95
0.90
0.85
75
40
45
Output Power (W)
Key:
120 V~
®
Job Name:
Job Number:
277 V~
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
50
55
60
65
70
75
Output Power (W)
Key:
120 V~
277 V~
Page
16
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 17 01.29.16
M Case: Case Dimensions
C
B
A
A 14.13 in (359 mm)
B 13.66 in (347 mm)
(mounting center)
C 1.18 in (30 mm)
D 1.00 in (25 mm)
D
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
17
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 18 01.29.16
Terminal Wiring Gauges
N
N/C
L
N/C
N/C
E1
E2
N/C
N/C
N/C
N/C
-V
N/C
+V
Ground1
18 AWG to 16 AWG
(0.75 mm2 to 1.5 mm2)
18 AWG to 16 AWG
(0.75 mm2 to 1.5 mm2)
18 AWG to 16 AWG (0.75 mm2 to 1.5 mm2)
18 AWG to 12 AWG
(0.75 mm2 to 4.0 mm2)
18 AWG to 12 AWG
(0.75 mm2 to 4.0 mm2)
18 AWG to 12 AWG (0.75 mm2 to 4.0 mm2)
Wiring Diagram for EcoSystemTM Digital Control
Hot (Black)
To
Line
Voltage
+V (Red)2
Neutral (White)
LED
Light
Engine
EcoSystemTM
5-Series
–V (Black)2
Ground1
E1 (Purple)
To
EcoSystemTM
Digital Link
E2 (Purple-White)
Note: Colors shown correspond to terminal blocks on driver.
1 Fixture and driver case must be grounded in accordance with local and national electrical codes; ground connection to driver must be accomplished
through grounding the case.
2 For maximum driver-to-LED light engine wire length, see charts in the Driver Wiring and Mounting section.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
18
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 19 01.29.16
EcoSystemTM Wiring Diagrams
N
EcoSystemTM Digital Link Overview
•The EcoSystemTM Digital Link wiring (E1 and E2)
connects the digital ballasts and drivers together to
form a lighting control system.
•Sensors do not connect directly to EcoSystemTM
5-Series LED drivers. Sensors are integrated through
the EcoSystemTM controller.
•E1 and E2 (EcoSystemTM digital link wires) are
polarity‑insensitive and can be wired in any topology.
•Power is supplied to the EcoSystemTM Digital Link from
the control system.
EcoSystemTM Digital Link Wiring
•EcoSystemTM Digital Link terminals accept only one
18 AWG to 16 AWG (0.75 mm2 to 1.5 mm2) solid
copper wire per terminal.
•Make sure that the supply breaker to the drivers and
EcoSystemTM Digital Link Supply is OFF when wiring.
•Connect the two conductors to the two driver
terminals E1 and E2 as shown.
•Using two different colors for E1 and E2 will reduce
confusion when wiring several drivers together.
•The EcoSystemTM Digital Link may be wired Class 1 or
Class 2. Consult applicable electrical codes for proper
wiring practices.
•For emergency wiring, please refer to Lutron®
Application Note #106.
N/C
L
N/C
N/C
E1
E2
Driver Terminals
N
N/C
L
N/C
N/C
E1
E2
Driver Terminals
To the EcoSystemTM Digital Link Supply
and additional drivers and/or ballasts
Notes
•The EcoSystemTM Digital Link Supply does not have to
be located at the end of the Digital Link.
•EcoSystemTM Digital Link length is limited by the wire
gauge used for E1 and E2 as follows:
Wire Gauge
12 AWG*
14 AWG*
16 AWG
18 AWG
Digital Link Length (max)
2200 ft
1400 ft
900 ft
550 ft
Wire Size
4.0 mm2*
2.5 mm2*
1.5 mm2
1.0 mm2
0.75 mm2
Digital Link Length (max)
828 m
517 m
310 m
207 m
155 m
* To use wire gauges larger than the terminal blocks’ rated gauge of
18 AWG to 16 AWG (0.75 mm2 to 1.5 mm2), refer to Terminal Wiring
Gauges diagram. The 18 AWG to 16 AWG (0.75 mm2 to 1.5 mm2) wires
connected to the driver should be less than 3 ft (0.9 m).
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
19
LED Dimming Driver
EcoSystemTM 5-Series LED Driver - 5 – 75 W
5% Dimming
369823g 20 01.29.16
EMC Information
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications. Operation of
this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own
expense.
Service
Warranty
For warranty information, please visit
www.lutron.com/ballastdriverwarranty
Replacement Parts
When ordering Lutron® replacement parts, please
provide the full model number. Consult Lutron if you
have any questions.
Further Information
For further information, please visit us at
www.lutron.com/EcoSystem5Series or contact our
LED Control Center of Excellence at 1.877.346.5338
or LEDs@lutron.com
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
20