TITLE:
DIMENSIONAL DRAWING, 3201L
INTELLITOUCH MODELS ONLY
OSD REMOTE
(INCLUDED)
77.7
[3.06]
762
[30.00]
31.8
[1.25]
400
[15.748]
37.9
[1.492]
M6 THREADS PER VESA MIS-F 400X400
MAX THREAD DEPTH = 10MM
698.4 (ACTIVE AREA)
[27.50]
392.9 (ACTIVE AREA)
[15.47]
456.5
[17.97]
400
[15.748]
COMPUTER MODULE BAY
RFID READER BAY
(OPTIONAL KIT)
I/O CONNECTIONS
HEADPHONE OUTPUT
AUDIO LINE IN
TOUCH USB
VGA INPUT
REMOTE OSD E483757
INCLUDED WITH MONITOR
DIMENSIONS ARE IN MILLIMETERS [INCHES]
HDMI IN
DISPLAY PORT IN
AC POWER IN
REMOTE OSD
COMPUTER MODULE
(OPTIONAL KIT)
SECURITY COVER
(INCLUDED IN OPTIONAL COMPUTER MODULE KIT)
MS601420
DATE: 06/19/2013
REV: C
TITLE:
DIMENSIONAL DRAWING, 3201L
PROJECTED CAPACITIVE MODEL ONLY
72.2
[2.84]
789.5
[31.08]
26.5
[1.04]
44.6
[1.75]
M6 THREADS PER VESA MIS-F 400X400
MAX THREAD DEPTH = 10MM
400
[15.75]
34.3
[1.35]
700.4
[27.57]
(ACTIVE AREA)
394.9
[15.55]
(ACTIVE AREA)
484
[19.05]
400
[15.75]
R21.8
[ .86 ]
DIMENSIONS ARE IN MILLIMETERS
MS601420
DATE: 06/19/2013
REV: C
TITLE:
DIMENSIONAL DRAWING, 3201L
OPTIONAL STAND KIT P/N E455084
63.8
[2.512]
33.8
[1.331]
226
[8.898]
36, X2
[1.42]
52, X2
[2.05]
452
[17.795]
DIMENSIONS ARE IN MILLIMETERS [INCHES]
208.1
[8.193]
MS601420
DATE: 06/19/2013
REV: C
TITLE:
DIMENSIONAL DRAWING, 3201L
OPTIONAL RFID KIT P/N:E603158
READER MODULE INCLUDED WITH KIT
RFID ANTENNA LOCATION
(BEHIND BEZEL)
50
[1.97]
7
[.28]
90.5
[3.56]
18
[.71]
DETAIL B
SCALE 1:1
INTEGRATED RFID READER ANTENNA LOCATION
SEE DETAIL
DIMENSIONS ARE IN MILLIMETERS [INCHES]
B
MS601420
DATE: 06/19/2013
REV: C
TITLE:
DIMENSIONAL DRAWING, 3201L
MOUNTING INTERFACE FOR PERIPHERALS
(ONE PER SIDE, FOUR TOTAL)
18.7
[.74]
M3 THREADS, X2
129
[5.08]
SEE DETAIL
C
DETAIL C
SCALE 3:5
DIMENSIONS ARE IN MILLIMETERS [INCHES]
MS601420
DATE: 06/19/2013
REV: C
TITLE:
DIMENSIONAL DRAWING, 3201L
THERMAL RECOMMENDATIONS
(PORTRAIT AND LANDSCAPE ORIENTATION)
FLUSH-MOUNTING
WALL-MOUNTING
MAINTAIN AMBIENT ROOM TEMPERATURE
BELOW 40° C.
AIRSPACE BEHIND MONITOR MUST NEVER EXCEED 40°
C DURING
OPERATION. INSTALL VENTING AND/OR FANS IN WALL STRUCTURE
TO CIRCULATE AIR AND MAINTAIN SAFE OPERATING TEMPERATURE.
WALL STRUCTURE
WALL
STRUCTURE
AIRFLOW DIRECTION
PRODUCT VENTING LOCATIONS
DO NOT BLOCK DURING OPERATION
AIRFLOW DIRECTION
TOUCHMONITOR
AIRFLOW DIRECTION
DIMENSIONS ARE IN MILLIMETERS [INCHES]
AIRFLOW DIRECTION
MS601420
DATE: 06/19/2013
REV: C
TITLE:
DIMENSIONAL DRAWING, 3201L
THERMAL RECOMMENDATIONS
(TABLE-TOP ORIENTATION)
PRODUCT VENTING ALL AROUND MONITOR
MUST BE KEPT OPEN TO MAINTAIN
SAFE OPERATING TEMPERATURE.
DIMENSIONS ARE IN MILLIMETERS [INCHES]
WHEN MOUNTED IN TABLE-TOP ORIENTATION,
DO NOT ALLOW AIR TEMPERATURE UNDERNEATH TOUCH MONITOR TO EXCEED
OPERATING TEMPERATURE SPECIFICATIONS.
RECOMMENDATION:
INSTALL AIR CIRCULATION DEVICES ABLE TO MONITOR AND
CONTROL AIRSPACE TEMPERATURE UNDER THE TOUCHMONITOR
SO IT WILL COMPLY WITH OPERATING TEMPERATURE SPECIFICATIONS .
MS601420
DATE: 06/19/2013
REV: C
TITLE:
DIMENSIONAL DRAWING, 3201L
OPTIONAL WALL MOUNT KIT PG. 1
P/N E750497
SAFETY WARNING:
1. FOLLOW ALL APPLICABLE BUILDING CODE GUIDELINES.
2. INSTALLER MUST SELECT APPROPRIATE SCREW TYPE
BASED ON WALL CONSTUCTION AND BUILDING CODE GUIDELINES.
3. DO NOT USE FEWER THAN 4 SCREWS PER BRACKET AND DO NOT
USE SCREWS LESS THAN 1/4" NOMINAL DIAMETER.
3. ALL SCREWS MUST BE SECURED TO WALL STUDS OR OTHER
STRUCTURAL COMPONENTS CAPABLE OF SAFELY SUPPORTING
THE FULL WEIGHT OF THE TOUCHMONITOR AND ANY ADDITIONAL
ITEMS ATTACHED TO IT. DO NOT FASTEN DIRECTLY TO
GYPSUM WALLBOARD.
INSTALLATION INSTRUCTIONS
MOUNTING BRACKET HOLE SPACING
FOR WOOD OR STEEL STUDDED WALLS
STUD SPACING = 16"
406.4[16.0]
25.7[1.01], X4
A
B
A
B
WALL STUDS
A
B
UPPER BRACKET
A
B
TILT MONITOR BACK ~15 DEGREES
AND ALIGN MONITOR PINS WITH WALLMOUNT
BRACKET HOOKS. ROTATE MONITOR DOWNWARD
SLOWLY TO MAKE SURE PINS ARE SAFELY
ENGAGED WITH WALLMOUNT HOOKS.
48[1.890]
SEE DETAIL D
330.9
[13.03]
TIGHTEN THUMBSCREW TO
ENSURE MONITOR IS SECURELY
ATTACHED TO WALL.
SEE DETAIL
E
38[1.496]
A
B
A
B
B
B
A
LOWER BRACKET
SCALE
3:20
SCALE
3:20
WALLBOARD
A
PIN
A
1/4" SCREW LOCATIONS FOR USE WITH
FLAT-HEAD SCREWS
B
1/4" SCREW LOCATIONS FOR USE WITH
STANDARD HEX BOLTS
THUMBSCREW
SCALE 1:2
DETAIL D
SCALE 2:5
DIMENSIONS ARE IN MILLIMETERS [INCHES]
DETAIL E
SCALE 2:5
MS601420
DATE: 06/19/2013
REV: C
TITLE:
DIMENSIONAL DRAWING, 3201L
OPTIONAL WALL MOUNT KIT PG. 2
P/N E750497
456.47
[17.971]
DISTANCE OFF OF WALL AFTER MOUNTING:
IT = 85.7
[3.37 ]
PCAP = 80.2
[3.16 ]
762
[30.00]
16.9
[.66]
406.4
[16.000]
177.8
[7.00]
MONITOR OUTLINE IN
PORTRAIT ORIENTATION
177.8
[7.00]
169.7
[6.68]
406.4
[16.000]
25[.99], X4
762
[30.00]
INTELLITOUCH MODELS ONLY
456.5
[17.97]
INTELLITOUCH MODELS ONLY
22.7
[.90]
DIMENSIONS ARE IN MILLIMETERS [INCHES]
MONITOR OUTLINE IN
LANDSCAPE ORIENTATION
175.5
[6.91]
MS601420
DATE: 06/19/2013
REV: C