Refereed journal papers:
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
Xinhua Guo, Shaozhe Wu, Weinong Fu, Yulong Liu, Yunchong Wang, Peihuang Zeng, "Control of
Dual-Stator Flux-Modulated Motor for Electric Vehicles," Energies, to be published.
Yulong Liu, Shuangxia Niu, and W. N. Fu, “Design of an Electrical Continuously Variable
Transmission Based Wind Energy Conversion System,” IEEE Trans. Industrial Electronics, to be
published.
W. N. Fu, and Yiduan Chen, “A Post-Assembly Magnetization Method for a Line-start Permanentmagnet Motor, ” IEEE Trans. Applied Superconductivity, vol. 26, no. 4, June 2016, pp. 0602604.
Yunchong Wang, W. N. Fu, and Shuangxia Niu, “A Novel Structure of Dual-stator Hybrid
Excitation Synchronous Motor, ” IEEE Trans. Applied Superconductivity, vol. 26, no. 4, June 2016,
pp. 0605805.
H. Liu, Y. Hao, S. Niu, W. Fu, “Computation of electromagnetic losses in double-rotor vernier PM
motors with three topologies using TS-FEM, ” International Review of Electrical Engineering, 2015,
vol. 10, no. 1, pp. 22-27.
Yiduan Chen, W. N. Fu, and Wei Li, “Performance Analysis of a Novel Triple-permanent-magnetexcited Magnetic Gear and Its Design Method,” IEEE Trans. Magn., vol. 52, no. 7, pp. 8001304,
July 2016.
Yulong Liu, Weinong Fu, Wei Li and Mingui Sun , “Design and Analysis of a Shoe-embeded Power
Harvester Based on Magnetic Gear,” IEEE Trans. Magn., vol. 52, no. 7, pp. 9100404,July 2016.
H. J. Liu, Y. Hao, Z. Y. Zhang, W. N. Fu, “Investigation and analysis of amorphous magnetic
materials for hybrid-flux-modulated motor,” Materials Research Innovations, vol. 19, no. S10 Dec.,
2015, pp. S10-424-S10-430.
Yunchong Wang, Shuangxia Niu, W.N. Fu, “Electromagnetic Performance Analysis of Novel PM
Flux-Regulatable PM Machines for Wide Constant-Power Speed Range Operation,” Energies 2015,
8. 13971-13984.
Yulong Liu, S. Niu, W. N. Fu, “A Novel Multiphase Brushless Power-Split Transmission System for
Wind Power Generation,” IEEE Trans. Magn., vol. 52, no. 2, pp. 8100907, Feb. 2016.
Lei Liu, W. N. Fu, Shiyou Yang, S. L. Ho, “Iron Loss Separation in High Frequency Using
Numerical Techniques,” IEEE Trans. Magn., vol. 52, no. 3, pp. 6300404, March 2016.
Lin Yang, S. L. Ho, W. N. Fu, and Lei Liu, “A Mesh Deformation Algorithm and Its Application in
Optimal Motor Design,” IEEE Trans. Magn., vol. 52, no. 3, pp. 7401204, March 2016.
S. L. Ho, Yanpu Zhao, W. N. Fu, and Ping Zhou, “Application of Edge Elements to 3-D
Electromagnetic Field Analysis Accounting for Both Inductive and Capacitive Effects,” IEEE Trans.
Magn., vol. 52, no. 3, pp. 7400504, March 2016.
Xiaoyu Liu, and W. N. Fu, “A Dynamic Dual-Response-Surface Methodology for Optimal Design
of a Permanent-magnet Motor Using Finite-element Method,” IEEE Trans. Magn., vol. 52, no. 3, pp.
7204304, March 2016.
Yunchong Wang, Shuangxia Niu, W. N. Fu, and S. L. Ho, “Design and Optimization of Electric
Continuous Variable Transmission System for Wind Power Generation,” IEEE Trans. Magn., vol.
52, no. 3, pp. 8200704, March 2016.
W. N. Fu, Yanpu Zhao, S. L. Ho, and Ping Zhou, “An Electromagnetic Field and Electric Circuit
Coupled Method for Solid Conductors in 3-D Finite Element Method, ” IEEE Trans. Magn., vol. 52,
no. 3, pp. 7401704, March 2016.
S. L. Ho, Q. S. Wang, S. X. Niu and W. N. Fu, “A Novel Magnetic-Geared Tubular Linear Machine
with Halbach Permanent-Magnet Arrays for Tidal Energy Conversion,” IEEE Trans. Magn., vol. 51,
no. 11, pp. 8113604, Nov. 2015.
Lin Yang, S. L. Ho, W. N. Fu, and Wei Li, “Design Optimization of a Permanent Magnet Motor
Derived from a General Magnetization Pattern,” IEEE Trans. Magn., vol. 51, no. 11, pp. 7209704,
Nov. 2015.
Shuangxia Niu, W. N. Fu, and S. L. Ho, “Nonlinear Convergence Acceleration of Magnetic Field
Computation,” IEEE Trans. Magn., vol. 51, no. 11, pp. 7209604, Nov. 2015.
C. Yu, S. Niu, S. L. Ho, and W. N. Fu, “Magnetic Circuit Analysis for a Magnetless Double-Rotor
Flux Switching Motor,” IEEE Trans. Magn., vol. 51, no. 11, pp. 8111905, Nov. 2015.
W. N. Fu, Yiduan Chen, and Xinhua Guo, “Novel Dual-Layer and Three-Layer Permanent-MagnetExcited Synchronous Motors,” IEEE Trans. Magn., vol. 51, no. 11, pp. 8108404, Nov. 2015.
[22]
[23]
[24]
[25]
[26]
[27]
[28]
[29]
[30]
[31]
[32]
[33]
[34]
[35]
[36]
[37]
[38]
[39]
[40]
[41]
Qingsong Wang, Shuangxia Niu, S. L. Ho, Weinong Fu and Shuguang Zuo, “Design and Analysis of
Novel Magnetic Flux-Modulated Mnemonic Machines,” IET Electric Power Applications, vol. 9. no.
7, pp. 469-477, 2015.
Longnv Li, W. N. Fu, Shuangxia Niu, S. L. Ho, and Yan Li, “A Quantitative Comparison Study of
Power Electronic Driven Flux-Modulated Machines Using Magnetic Field and Thermal Field Cosimulation,” IEEE Trans. Industrial Electronics, vol. 62, no. 10, pp. 6076-6084, October 2015.
Yiduan Chen, Weinong Fu, “A Novel Hybrid-flux Magnetic Gear and Its Performance Analysis
Using 3-D Finite Element Method,” Energies, vol. 8, no. 5, pp. 3313-3327, 2015.
Jun Wang, Huijuan Liu, Cai Chen, Weinong Fu, “Performance Comparison Analysis of a Squirrelcage Rotor Induction Motor with Different Rotor Structures,” Sensors & Transducers, vol. 183, no.
12, pp. 209-214, December 2014.
Weinong Fu and Yiduan Chen, “Data Structures and Program Techniques of Finite Element Methods
for Analysis and Optimization of Electric Devices,” International Journal of Applied
Electromagnetics and Mechanics, 47, pp. 875-883, 2015.
Yulong Liu, S. Niu, and S. L. Ho, W. N. Fu, and T. W. Ching, “Design and analysis of a new HTS
double-stator doubly-fed wind generator, ” IEEE Trans. Applied Superconductivity, vol. 25, no. 3,
pp. 5200804, June 2015.
Yulong Liu, W. N. Fu, S. L. Ho, S. Niu, and T. W. Ching, “Electromagnetic performance analysis of
novel HTS doubly-fed flux-modulated machines, ” IEEE Trans. Applied Superconductivity, vol. 25,
no. 3, pp. 5203204, June 2015.
Longnv Li, Shuangxia Niu, S. L. Ho, W. N. Fu, and Yan Li, “A Novel Approach to Investigate the
Hot-spot Temperature-rise in Power Transformers,” IEEE Trans. Magn., vol. 51, no. 3, pp. 8400204,
March 2015.
Lin Yang, S. L. Ho, Shiyou Yang, and W. N. Fu, “A Methodology based on Mesh Morphing
Algorithm and Improved Tabu Algorithm for Nonlinear Inverse Scattering,” IEEE Trans. Magn., vol.
51, no. 3, pp. 7203604, March 2015.
Chuang Yu, Shuangxia Niu, S. L. Ho, Weinong Fu, and Longnv Li, “Hysteresis Modeling in
Transient Analysis of Electric Motors with AlNiCo Magnets,” IEEE Trans. Magn., vol. 51, no. 3, pp.
7300804, March 2015.
Lin Yang, Shiyou Yang, S. L. Ho, and W. N. Fu, “An Improved Evolution Strategy and its
Application to Inverse Scattering in Microwave Imaging,” IEEE Trans. Magn., vol. 51, no. 3, pp.
7202504, March 2015.
Yulong Liu, S. L. Ho, W. N. Fu, Xiu Zhang, “Design Optimization of a Novel Doubly Fed DualRotor Flux-Modulated Machine for Hybrid Electric Vehicles,” IEEE Trans. Magn., vol. 51, no. 3, pp.
8101604, March 2015.
Shan Peng, W. N. Fu, and S. L. Ho, “A Novel High Torque-Density Triple-Permanent-MagnetExcited Magnetic Gear,” IEEE Trans. Magn., vol. 50, no. 11, pp. 8001704, Nov. 2014.
Shan Peng, W. N. Fu, and S. L. Ho, “A Novel Triple-Permanent-Magnet-Excited Hybrid-Flux
Magnetic Gear and Its Design Method Using 3-D Finite Element Method,” IEEE Trans. Magn., vol.
50, no. 11, pp. 8104904, Nov. 2014.
Lin Yang, S. L. Ho, W. N. Fu, “Design Optimizations of Electromagnetic Devices Using Sensitivity
Analysis and Tabu Algorithm,” IEEE Trans. Magn., vol. 50, no. 11, pp. 7201204, 2014.
Yanpu Zhao, S. L. Ho, W. N. Fu, “A Novel Fast Remesh-free Mesh Deformation Method and Its
Application to Optimal Design of Electromagnetic Devices,” IEEE Trans. Magn., vol. 50, no. 11,
pp. 7200904, 2014.
Yulong Liu, S. L. Ho, W. N. Fu, “A Novel Magnetic Gear with Intersecting Axes,” IEEE Trans.
Magn., vol. 50, no. 11, pp. 8001804, 2014.
Longnv Li, Wei Nong Fu, S. L. Ho, Shuangxia Niu, and Yan Li, “Numerical Analysis and
Optimization of Lobe-type Magnetic Shielding in a 334 MVA Single-Phase Auto-Transformer,”
IEEE Trans. Magn., vol. 50, no. 11, pp. 8500504, 2014.
Yiduan Chen, Wei Nong Fu, S. L. Ho, and Huijuan Liu, “A Quantitative Comparison Analysis of
Radial-flux, Transverse-flux and Axial-flux Magnetic Gears,” IEEE Trans. Magn., vol. 50, no. 11,
pp. 8104604, 2014.
Xin Zhang, Xiu Zhang, S. L. Ho, and W. N. Fu, “Designing Loudspeaker by Ensemble of Composite
Differential Evolution Ingredients,” IEEE Trans. Magn., vol. 50, no. 11, pp. 7200604, 2014.
[42]
[43]
[44]
[45]
[46]
[47]
[48]
[49]
[50]
[51]
[52]
[53]
[54]
[55]
[56]
[57]
[58]
[59]
[60]
[61]
[62]
Xiu Zhang, S. L. Ho, W. N. Fu, “Fast algorithm to obtain the torque characteristics with respect to
load angle of synchronous machines using finite element method,” IEEE Trans. Magn., vol. 50, no.
11, pp. 7200704, 2014.
Chuang Yu, Shuangxia Niu, S. L. Ho, W. N. Fu, “Design and Analysis of a Magnetless DoubleRotor Flux Switching Motor for Low Cost Application,” IEEE Trans. Magn., vol. 50, no. 11, pp.
8105104, 2014.
Chuang Yu, Shuangxia Niu, S. L. Ho, and W. N. Fu, “Imbalanced Force in Permanent Magnet
Brushless Motors with Magnetic and/or Electric Asymmetries,” IEEE Trans. Magn., vol. 50, no. 11,
pp. 8103804, 2014.
Yulong Liu, Shuangxia Niu, S. L. Ho, and Wei Nong Fu, “A New Hybrid-Excited Electric
Continuous Variable Transmission System,” IEEE Trans. Magn., vol. 50, no. 11, pp. 8104104, 2014.
S. L. Ho , Shuangxia Niu, W.N. Fu, “A New Dual-Stator Bidirectional-Modulated PM Machine and
Its Optimization,” IEEE Trans. Magn., vol. 50, no. 11, pp. 8103404, 2014.
Shuangxia Niu, Yulong Liu, S. L. Ho, and W. N. Fu, “Development of a Novel Brushless Power
Split Transmission System for Wind Power Generation Application,” IEEE Trans. Magn., vol. 50,
no. 11, pp. 8203004, 2014.
Shuangxia Niu, S. L. Ho, W. N. Fu, K. T. Chau and F. Lin, “A Feasibility Study on a New Brushless
and Gearless Contra-Rotating Permanent Magnet Wind Power Generator,” Journal of Applied
Physics, vol. 115, no. 17, pp. 17E708-17E708-3, May 2014.
W. N. Fu, Xiu Zhang and S. L. Ho, “A fast frequency-domain parameter extraction method using
time-domain FEM,” IEEE Trans. Magn., vol. 50, no. 2, pp. 433-436, Feb. 2014.
S. L. Ho, Yanpu Zhao, and W. N. Fu, “Adaptive discontinuous Galerkin method for transient
analysis of eddy current fields in high-speed rotating solid rotors,” IEEE Trans. Magn., vol. 50, no. 2,
pp. 589-592, Feb. 2014.
Shuangxia Niu, S. L. Ho and W. N. Fu, “A Novel Stator and Rotor Dual PM Vernier Motor with
Space Vector Pulse Width Modulation,” IEEE Trans. Magn., vol. 50, no. 2, pp. 805-808, Feb. 2014.
Xiu Zhang, Xin Zhang, S. L. Ho, and W. N. Fu, “A Modification of Artificial Bee Colony
Algorithm Applied to Loudspeaker Design Problem,” IEEE Trans. Magn., vol. 50, no. 2, pp. 737740, Feb. 2014.
Yulong Liu, S. L. Ho and W. N. Fu, “Novel Electrical Continuously Variable Transmission System
and Its Numerical Model,” IEEE Trans. Magn., vol. 50, no. 2, pp. 757-760, Feb. 2014.
Yanpu Zhao, S. L. Ho, and W. N. Fu, “An Adaptive Degrees-of-Freedom Finite-Element Method for
Transient Magnetic Field Analysis,” IEEE Trans. Magn., vol. 49, no. 12, 2013.
Yanpu Zhao, S. L. Ho, and W. N. Fu, “An Operator Splitting Finite Element Method for Eddycurrent Field Analysis in High-speed Rotating Solid Conductors,” IEEE Trans. Magn., vol. 49, no. 7,
pp. 3171-3174, July 2013.
Yunchong Wang, S. L. Ho, W. N. Fu and J. X. Shen, “A Novel Rotor Position Detection Method for
Sensorless Control of Magnetic-Geared Permanent-Magnet Brushless Motor,” IEEE Trans. Magn.,
vol. 49, no. 7, pp. 3961-3964, July 2013.
Q. Chen, S. L. Ho, W. N. Fu, “A New Low Radiation Wireless Transmission System in Mobile
Phone Application Based on Magnetic Resonant Coupling,” IEEE Trans. Magn., vol. 49, no. 7, pp.
3476-3479, July 2013.
Shuangxia Niu, S. L. Ho, and W. N. Fu, “A Novel Double-Stator Double-Rotor Brushless Electrical
Continuously Variable Transmission System,” IEEE Trans. Magn., vol. 49, no. 7, pp. 3909-3912,
July 2013.
W. N. Fu, and S. L. Ho, “Instantaneous Power Balance Analysis in Finite-Element Method of
Transient Magnetic Field and Circuit Coupled Computation,” IEEE Trans. Magn., vol. 49, no. 5, pp.
1561-1564, May 2013.
S. L. Ho, Yanpu Zhao, and W. N. Fu, “A Novel Mesh Morphing Technique for Large Shape
Deformation and Its Application to Optimal Design Problems,” IEEE Trans. Magn., vol. 49, no. 5,
pp. 2165-2168, May 2013.
Yanpu Zhao, S. L. Ho, and W. N. Fu, “A Novel Adaptive Mesh Finite Element Method for
Nonlinear Magnetic Field Analysis,” IEEE Trans. Magn., vol. 49, no. 5, pp. 1777-1780, May 2013.
Shuangxia Niu, S. L. Ho, and W. N. Fu, “Power Balanced Electromagnetic Torque Computation in
Electric Machines Based on Energy Conservation in Finite-element Method,” IEEE Trans. Magn.,
vol. 49, no. 5, pp. 2385-2388, May 2013.
[63]
[64]
[65]
[66]
[67]
[68]
[69]
[70]
[71]
[72]
[73]
[74]
[75]
[76]
[77]
[78]
[79]
[80]
[81]
Shuangxia Niu, S. L. Ho, and W. N. Fu, “Design of a Novel Electrical Continuously Variable
Transmission System Based on Harmonic Spectra Analysis of Magnetic Field,” IEEE Trans. Magn.,
vol. 49, no. 5, pp. 2161-2164, May 2013.
Xiu Zhang, H. L. Li, S. L. Ho, and W. N. Fu, “A Multi-Slice Finite Element Model Including
Distributive Capacitances for Wireless Magnetic Resonant Energy Transfer Systems with Circular
Coils,” IEEE Trans. Magn., vol. 49, no. 5, pp. 1857-1860, May 2013.
S. L. Ho, Xiu Zhang, and W. N. Fu, “Extension of Time-Domain Finite Element Method to
Nonlinear Frequency-Sweeping Problem,” IEEE Trans. Magn., vol. 49, no. 5, pp. 1781-1784, May
2013.
Xiu Zhang, S. L. Ho, and W. N. Fu, “A Hybrid Optimal Design Strategy of Wireless MagneticResonant Charger for Deep Brain Stimulation Devices,” IEEE Trans. Magn., vol. 49, no. 5, pp.
2145-2148, May 2013.
Xin Zhang, Xiu Zhang, Shiu Yin Yuen, S. L. Ho, and W. N. Fu, “An Improved Artificial Bee
Colony Algorithm for Optimal Design of Electromagnetic Devices,” IEEE Trans. Magn., vol. 49,
no. 8, pp. 4811-4816, Aug. 2013.
W. N. Fu, Xiu Zhang, and S. L. Ho, “A Fast Algorithm for Frequency-domain Solutions of
Electromagnetic Field Computation of Electric Devices Using Time-domain Finite-element
Method,” IEEE Trans. Magn., vol. 49, no. 1, pp. 530-535, Jan. 2013.
W. N. Fu, Xiu Zhang, and S. L. Ho, “A general time-domain finite-element method for frequencydomain solutions,” IEEE Trans. Magn., vol. 49, no. 4, pp. 1284-1289, April 2013.
W. N. Fu, S. L. Ho, and Ping Zhou, “Reduction of computing time for steady-state solutions of
magnetic field and circuit coupled problems using time-domain finite element method,” IEEE Trans.
Magn., vol. 48, no. 11, pp. 3363-3366, November 2012.
H. L. Li, S. L. Ho, and W. N. Fu, “Precise Magnetic Field Modeling Techniques of Rotation
Problems Using Transient Finite-element Method,” IEEE Trans. Magn., vol. 48, no. 11, pp. 41924195, November 2012.
S. L. Ho, H. L. Li, and W. N. Fu, “A Post-assembly Magnetization Method of Direct-start Interior
Permanent Magnet Synchronous Motors and its Finite-element Analysis of Transient Magnetic
Field,” IEEE Trans. Magn., vol. 48, no. 11, pp. 3238-3241, November 2012.
Shuangxia Niu, Ningning Chen, S. L. Ho, and W. N. Fu, “Design Optimization of Magnetic Gears
Using Mesh Adjustable Finite Element Algorithm for Improved Torque,” IEEE Trans. Magn., vol.
48, no. 11, pp. 4156-4159, November 2012.
S. L. Ho, Shuangxia Niu and W. N. Fu, “Design and Analysis of Novel Focused Hyperthermia
Devices,” IEEE Trans. Magn., vol. 48, no. 11, pp. 3254-3257, November 2012.
Xiu Zhang, S. L. Ho, and W. N. Fu, “Analysis and Optimization of Magnetically Coupled
Resonators for Wireless Power Transfer,” IEEE Trans. Magn., vol. 48, no. 11, pp. 4511-4514,
November 2012.
Xiu Zhang, Yanpu Zhao, S. L. Ho, and W. N. Fu, “Analysis of Wireless Power Transfer System
Based on 3-D Finite Element Method Including Displacement Current,” IEEE Trans. Magn., vol. 48,
no. 11, pp. 3692-3695, November 2012.
Xiu Zhang, S. L. Ho, and W. N. Fu, “Quantitative Design and Analysis of Relay Resonators in
Wireless Power Transfer System,” IEEE Trans. Magn., vol. 48, no. 11, pp. 4026-4029, November
2012.
S. L. Ho, Yanpu Zhao, and W. N. Fu, “A Characteristic Galerkin Method for Eddy-current Field
Analysis in High-speed Rotating Solid Conductors,” IEEE Trans. Magn., vol. 48, no. 11, pp. 46344637, November 2012.
S. L. Ho, Yanpu Zhao, and W. N. Fu, “An Efficient Parameterized Mesh Method for Large Shape
Variation in Optimal Designs of Electromagnetic Devices,” IEEE Trans. Magn., vol. 48, no. 11, pp.
4507-4510, November 2012.
Yanpu Zhao, Xiu Zhang, S. L. Ho, and W. N. Fu, “An Adaptive Mesh Method in Transient Finite
Element Analysis of Magnetic Field Using a Novel Error Estimator,” IEEE Trans. Magn., vol. 48,
no. 11, pp. 4160-4163, November 2012.
Yunchong Wang, S. L. Ho, W. N. Fu and J. X. Shen, “A Novel Brushless Doubly Fed Generator for
Wind Power Generation,” IEEE Trans. Magn., vol. 48, no. 11, pp. 4172-4175, November 2012.
[82]
[83]
[84]
[85]
[86]
[87]
[88]
[89]
[90]
[91]
[92]
[93]
[94]
[95]
[96]
[97]
[98]
Quan Chen, S. L. Ho, and W. N. Fu, “Numerical Investigation of Magnetic Resonant Coupling
Technique in Inter-Chip Communication via Electromagnetics-TCAD Coupled Simulation,” IEEE
Trans. Magn., vol. 48, no. 11, pp. 4253-4256, November 2012.
S. L. Ho, L. Jian, W. Gong, W. N. Fu, “Design and Analysis of a Novel Targeted Magnetic Fluid
Hyperthermia System for Tumor Treatment,” IEEE Trans. Magn., vol. 48, no. 11, pp. 3262-3265,
November 2012.
Yik Yan Ko, S. L. Ho, W. N. Fu and Xiu Zhang, “A Novel Hybrid Resonator for Wireless Power
Delivery in Bio-Implantable Devices,” IEEE Trans. Magn., vol. 48, no. 11, pp. 4518-4521,
November 2012.
Junhua Wang, Jiangui Li, S. L. Ho, W. N. Fu, and Mingui Sun, “Lateral and Angular Misalignments
Analysis of a New PCB Circular Spiral Resonant Wireless Charger,” IEEE Trans. Magn., vol. 48,
no. 11, pp. 4522-4525, November 2012.
Junhua Wang, Jiangui Li, S. L. Ho, W. K. Lee, W. Y. Chau, W. N. Fu, Ying Li, Hongli Yu, and
Mingui Sun, “Study and Experimental Verification of a Rectangular Printed-Circuit-Board Wireless
Transfer System for Low Power Devices,” IEEE Trans. Magn., vol. 48, no. 11, pp. 3013-3016,
November 2012.
Huijuan Liu, Longya Xu, Mingzhu Shangguan, and W. N. Fu，“Finite Element Analysis of 1 MW
High Speed Wound-Rotor Synchronous Machine,” IEEE Trans. Magn., vol. 48, no. 11, pp. 46504653, Nov. 2012.
Chaoqun Jiao, Zhanjun Xia, and Weinong Fu, “A Generalized Multi-conductor Transmission Lines
(MTLs) Model and Optimized Method for the Solution of the MTLs Equations,” International
Journal of Antennas and Propagation, vol. 2012, Article ID 827240, 7 pages, accepted on 2
February 2012.
Junhua Wang, Jiangui Li, S. L. Ho, W. N. Fu, Zhigang Zhao, Weili Yan, and Mingui Sun,
“Analytical study and corresponding experiments for a new resonant magnetic charger with circular
spiral coils,” Journal of Applied Physics, vol. 111, no. 7, pp. 07E704-07E704-3, April 2012.
W. N. Fu, S. L. Ho, Shuangxia Niu and Jianguo Zhu, “Comparison study of finite element methods
dealing with floating conductors in electric field,” IEEE Trans. Magn., vol. 48, no. 2, pp. 351-354,
February 2012.
S. L. Ho, Shuangxia Niu, W. N. Fu and Jianguo Zhu, “A power balanced time-stepping finite
element method for transient magnetic field computation,” IEEE Trans. Magn., vol. 48, no. 2, pp.
291-294, February 2012.
S. L. Ho, Shuangxia Niu, W. N. Fu and Jianguo Zhu, “A Mesh-insensitive Methodology for
Magnetic Force Computation in Finite-element Analysis,” IEEE Trans. Magn., vol. 48, no. 2, pp.
287-290, February 2012.
S. L. Ho, Shuangxia Niu, W. N. Fu and Jianguo Zhu, “A sensitivity analysis method for equivalent
parameter extraction of transient magnetic field problems with internal coupled circuits,” IEEE
Trans. Magn., vol. 48, no. 2, pp. 295-298, February 2012.
S. L. Ho, Shuangxia Niu, W. N. Fu, and Jianguo Zhu, “A convenient mesh rotation method of finite
element analysis using sub-matrix transformation approach,” IEEE Trans. Magn., vol. 48, no. 2, pp.
303-306, February 2012.
Yanpu Zhao, Shuangxia Niu, S. L. Ho, W. N. Fu and Jianguo Zhu, “A Parameterized Mesh
Generation and Refinement Method for Finite Element Parameter Sweeping Analysis of
Electromagnetic Devices,” IEEE Trans. Magn., IEEE Trans. Magn., vol. 48, no. 2, pp. 239-242,
February 2012.
Z. Wang, Shuangxia Niu, S. L. Ho and W. N. Fu and Jianguo Zhu, “A Position Detection Strategy
for Sensorless Surface Mounted Permanent Magnet Motors at Low Speed Using Transient FiniteElement Analysis,” IEEE Trans. Magn., vol. 48, no. 2, pp. 1003-1006, February 2012.
H. L. Li, S. L. Ho and W. N. Fu, “Application of Multi-stage Diagonally-implicit Runge-Kutta
Algorithm to Transient Magnetic Field Computation Using Finite Element Method,” Trans. Magn.,
vol. 48, no. 2, pp. 279-282, February 2012.
Shuangxia Niu, S. L. Ho, W. N. Fu and Jianguo Zhu, “Eddy current reduction in high-speed
machines and loss analysis with multislice time-stepping finite-element method,” IEEE Trans.
Magn., vol. 48, no. 2, pp. 1007-1010, February 2012.
[99]
[100]
[101]
[102]
[103]
[104]
[105]
[106]
[107]
[108]
[109]
[110]
[111]
[112]
[113]
[114]
[115]
[116]
[117]
Yanpu Zhao, Xiu Zhang, S. L. Ho and W. N. Fu, “A Local Discontinuous Galerkin Method for Eddy
Current Field Analysis in High-speed Moving Conductors,” IEEE Trans. Magn., vol. 48, no. 2, pp.
251-254, February 2012.
S. L. Ho, Yanpu Zhao and W. N. Fu, “A Local Discontinuous Galerkin Method for Numerical
Computation of Waveguide Eigenvalue Problems in Polar Coordinates,” IEEE Trans. Magn., vol. 48,
no. 2, pp. 255-258, Feb. 2012.
N. Yin, G. Xu, Q. Yang, J. Zhao, X. Yang, J. Jin, Weinong Fu and M. Sun, “Analysis of Wireless
Energy Transmission for Implantable Device Based on Coupled Magnetic Resonance, ” IEEE Trans.
Magn., vol. 48, no. 2, pp. 723-726, Feb. 2012.
Jan Kumbernuss, Chen Jian, Junhua Wang, H. X. Yang, W.N. Fu, “A novel magnetic levitated
bearing system for Vertical Axis Wind Turbines (VAWT),” Applied Energy, vol. 90, no. 1, pp. 148153, Feb 2012.
Shuangxia Niu, Yanpu Zhao, S. L. Ho, and W. N. Fu, “A Parameterized Mesh Technique for Finite
Element Magnetic Field Computation and its Application to Optimal Designs of Electromagnetic
Devices,” IEEE Trans. Magn., vol. 47, no. 10, pp. 2943-2946, October 2011.
Shuangxia Niu, S. L. Ho, and W. N. Fu, “Performance Analysis of a Novel Magnetic-Geared
Tubular Linear Permanent Magnet Machine,” IEEE Trans. Magn., vol. 47, no. 10, pp. 3598-3601,
October 2011.
S. L. Ho, Shuangxia Niu, and W. N. Fu, “Design and Comparison of Vernier Permanent Magnet
Machines,” IEEE Trans. Magn., vol. 47, no. 10, pp. 3280-3283, October 2011.
S. L. Ho, Shuangxia Niu, and W. N. Fu, “Design and Analysis of a Novel Axial-Flux Machine,”
IEEE Trans. Magn., vol. 47, no. 10, pp. 4368-4371, October 2011.
Xiao Luo, Shuangxia Niu, S. L. Ho, and W. N. Fu, “A Design Method of Magnetically Resonanting
Wireless Power Delivery Systems for Bio-Implantable Devices,” IEEE Trans. Magn., vol. 47, no. 10,
pp. 3833-3836, October 2011.
Y. B. Li, Shuangxia Niu, S. L. Ho, Yanhai Li and W. N. Fu, “Hysteresis Effects of Laminated Steel
Materials on Detent Torque in Permanent Magnet Motors,” IEEE Trans. Magn., vol. 47, no. 10, pp.
3594-3597, October 2011.
S. L. Ho, Ningning Chen, and W. N. Fu, “A Moving Mesh Embedded Algorithm in Finite Element
Method for Optimal Design of Electromagnetic Devices,” IEEE Trans. Magn., vol. 47, no. 10, pp.
2947-2950, October 2011.
Xiu Zhang, S. L. Ho, and W. N. Fu, “Quantitative Analysis of a Wireless Power Transfer Cell with
Planar Spiral Structures,” IEEE Trans. Magn., vol. 47, no. 10, pp. 3200-3203, October 2011.
Junhua Wang, S. L. Ho, W. N. Fu, and Mingui Sun, “Analytical Design Study of a Novel Witricity
Charger with Lateral and Angular Misalignments for Efficient Wireless Energy Transmission,”
IEEE Trans. Magn., vol. 47, no. 10, pp. 2616-2619, October 2011.
Junhua Wang, S. L. Ho, W. N. Fu, and Mingui Sun, “FEM Simulations and Experiments for the
Advanced Witricity Charger with Compound Nano-TiO2 Interlayers,” IEEE Trans. Magn., vol. 47,
no. 10, pp. 4449-4452, October 2011.
Youhua Wang, Junhua Wang, S. L. Ho, Xiaoguang Yang, W. N. Fu and Guizhi Xu, “Design and
FEM Analysis of a New Distributed Vernier Traveling Wave Induction Heater for Heating Moving
Thin Strips,” IEEE Trans. Magn., vol. 47, no. 10, pp. 2612-2615, October 2011.
Yong Liu, Chengde Tong, Jingang Bai, Shuang Yu, Weiming Tong and Weinong Fu, “Optimization
of an 80 kW Radial-Radial Flux Compound-Structure Permanent-Magnet Synchronous Machine
Used for HEVs,” IEEE Trans. Magn., vol. 47, no. 10, pp. 2399-2402, October 2011.
Liang Jin, Qingxin Yang, Suzhen Liu, Chuang Zhang, Guizhi Xu, Weili Yan and Weinong Fu,
“Enhanced Acoustic Emission Detection Induced by Electromagnetic Stimulation With External
Magnetic Field,” IEEE Trans. Magn., vol. 47, no. 10, pp. 3284-3287, October 2011.
S. L. Ho, Shuangxia Niu, and W. N. Fu, “An equivalent parameter extraction method of transient
electric circuit and magnetic field coupled problem based on sensitivity computation of system
equations,” IEEE Trans. Magn., vol. 47, no. 8, pp. 2068-2075, August 2011.
Youhua Wang, Junhua Wang, Lingling Pang, S. L. Ho, and W. N. Fu, “An Advanced Double-layer
Combined Windings Transverse Flux System for Thin Strip Induction Heating,” Journal of Applied
Physics, vol. 109, no. 7, pp. 07E511 – 07E511-3, Apr. 2011.
[118] S. L. Ho, Junhua Wang, W. N. Fu, and Mingui Sun, “A Novel Resonant Inductive Magnetic
Coupling Wireless Charger with TiO2 Compound Interlayer,” Journal of Applied Physics, vol. 109,
no. 7, pp. 07E502 – 07E502-3, Apr. 2011.
[119] Youhua Wang, Junhua Wang, S. L. Ho, Lingling Pang, and W. N. Fu, “A Neural Network
Combined With 3-D FEM Applied to Optimize Eddy Current and Temperature Distributions of
Travelling Wave Induction Heating System,” Journal of Applied Physics, vol. 109, no. 7, pp.
07E522 – 07E522-3, Apr. 2011.
[120] K. W. E. Cheng, Kai Ding, S. L. Ho, W. N. Fu, Junhua Wang and Shuxiao Wang, “Polymer-bonded
NiZn ferrite magnetic cores mixed with titanium (IV) isopropoxide (C12H28O4Ti),” Journal of
Applied Physics , vol.109, no.7, pp.07A514-07A514-3, Apr 2011.
[121] Junhua Wang, Siu Lau Ho, Weinong Fu, Cheung Tsz Kit, and Mingui Sun, “Finite-element analysis
and corresponding experiments of resonant energy transfer for wireless transmission devices,” IEEE
Trans. Magn., vol. 47, no. 5, pp. 1074-1077, May 2011.
[122] S. L. Ho, Junhua Wang, W. N. Fu, and Mingui Sun, “A Comparative Study between Novel Witricity
and Traditional Inductive Magnetic Coupling in Wireless Charging,” IEEE Trans. Magn., vol. 47,
no. 5, pp. 1522-1525, May 2011.
[123] Fei Zhang, Steven A. Hackworth, Weinong Fu, Chengliu Li, Zhihong Mao and Mingui Sun, “Relay
Effect of Wireless Power Transfer Using Strongly Coupled Magnetic Resonances,” IEEE Trans.
Magn., vol. 47, no. 5, pp. 1478-1481, May 2011.
[124] Siguang An, Shiyou Yang, S. L. Ho, Tao Li, and Weinong Fu, “A Modified Tabu Search Method
Applied to Inverse Problems,” IEEE Trans. Magn., vol. 47, no. 5, pp. 1234-1237, May 2011.
[125] S. L. Ho, Shiyou Yang , and W.N. Fu, “A population-based incremental learning vector algorithm
for multiobjective optimal designs,” IEEE Trans. Magn., vol. 47, no. 5, pp. 1306-1309, May 2011.
[126] Lin Yang, S. L. Ho, Shiyou Yang, and Weinong Fu, “Numerical Analysis of Inverse Scattering in
Microwave Imaging,” IEEE Trans. Magn., vol. 47, no. 5, pp. 1482-1485, May 2011.
[127] S. L. Ho, Shiyou Yang, Yingying Yao, and W. N. Fu, “Robust optimization using a methodology
based on cross entropy methods,” IEEE Trans. Magn., vol. 47, no. 5, pp. 1286-1289, May 2011.
[128] W. N. Fu, S. L. Ho, and Ningning Chen, “Application of Shell Element Method to 3-D FiniteElement Computation of the Force on One Body in Contact with Others,” IEEE Trans. Magn., vol.
46, no. 11, pp. 3893-3898, November 2010.
[129] W. N. Fu, and S. L. Ho, “Extension of the concept of windings in magnetic field electric circuit
coupled finite element method,” IEEE Trans. Magn., vol. 46, no. 6, pp. 2119-2123, June 2010.
[130] S. L. Ho, Shuangxia Niu, and W. N. Fu, “Transient analysis of a magnetic gear integrated brushless
permanent magnet machine using circuit-field-motion coupled time-stepping finite element method,”
IEEE Trans. Magn., vol. 46, no. 6, pp. 2074-2077, June 2010.
[131] Shuangxia Niu, S. L. Ho, and W. N. Fu, “A novel direct-drive dual-structure permanent magnet
machine,” IEEE Trans. Magn., vol. 46, no. 6, pp. 2036-2039, June 2010.
[132] Shuangxia Niu, S. L. Ho, W. N. Fu, and L. L. Wang, “Quantitative comparison of novel vernier
permanent magnet machines,” IEEE Trans. Magn., vol. 46, no. 6, pp. 2032-2035, June 2010.
[133] Ningning Chen, S. L. Ho, and W. N. Fu, “Optimization of permanent magnet surface shapes of
electric motors for minimization of cogging torque using FEM,” IEEE Trans. Magn., vol. 46, no. 6,
pp.2478- 2481, June 2010.
[134] Junhua Wang, S. L. Ho, W. N. Fu, and Y. H. Wang, “Design and analysis of a novel traveling wave
induction heating system with magnetic slot wedges for heating moving thin strips,” IEEE Trans.
Magn., vol. 46, no. 6, 2010, pp.2175- 2178, June 2010.
[135] W. N. Fu and S. L. Ho, “Dynamic demagnetization computation of permanent magnet motors using
finite element method with normal magnetization curves,” IEEE Trans. Applied
Superconductivity, vol. 20, no. 3, pp. 851-855, June 2010.
[136] W. N. Fu and S. L. Ho, “A 2-dimensional finite-element method for transient magnetic field
computation taking into account parasitic capacitive effects,” IEEE Trans. Applied
Superconductivity, vol. 20, no. 3, pp. 1869-1873, June 2010.
[137] S. L. Ho, Shuangxia Niu, and W. N. Fu, “Reduction of numerical errors of time-stepping finite
element analysis for dynamic simulation of electric machines,” IEEE Trans. Applied
Superconductivity, vol. 20, no. 3, pp. 1864-1868, June 2010.
[138] S. L. Ho, Shuangxia Niu, and W. N. Fu, “A novel solid-rotor induction motor with skewed slits in
radial and axial directions and its performance analysis using finite element method,” IEEE Trans.
Applied Superconductivity, vol. 20, no. 3, pp. 1089-1092, June 2010.
[139] S. L. Ho, N. N. Chen and W. N. Fu, “An optimal design method for the minimization of cogging
torques of a permanent magnet motor using FEM and genetic algorithm,” IEEE Trans. Applied
Superconductivity, vol. 20, no. 3, pp. 861-864, June 2010.
[140] Q. Yang, G. Xu, S. L. Ho, H. Yu, X. Zhang, W. N. Fu, S. Yang and X. Shang, “Analysis for
Magnetic Stimulation Effects on Acupoint,” IEEE Trans. Applied Superconductivity, vol. 20, no. 3,
pp. 802-805, June 2010.
[141] G. Xu, X. Zhang, H. Yu, S. L. Ho, Q. Yang, W. N. Fu and W. Yan, “Complexity Analysis of EEG
Under Magnetic Stimulation at Acupoints,” IEEE Trans. Applied Superconductivity, vol. 20, no. 3,
pp. 1029-1032, June 2010.
[142] W. N. Fu and S. L. Ho, “Elimination of nonphysical solutions and implementation of adaptive step
size algorithm in time-stepping finite-element method for magnetic field – circuit – motion coupled
problems,” IEEE Trans. Magn., vol. 46, no. 1, pp. 29-38, Jan. 2010.
[143] W. N. Fu and S. L. Ho, “A quantitative comparative analysis of a novel flux-modulated permanentmagnet motor for low-speed drive,” IEEE Trans. Magn., vol. 46, no. 1, pp.127-134, Jan. 2010.
[144] W. N. Fu and S. L. Ho, “Matrix analysis of 2-D eddy-current magnetic fields,” IEEE Trans. Magn.,
vol. 45, no. 9, pp. 3343-3350, September 2009.
[145] W. N. Fu, S. L. Ho and Zheng Zhang, “Design of Position Detection Strategy of Sensorless
Permanent Magnet Motors at Standstill Using Transient Finite-Element Analysis,” IEEE Trans.
Magn., Vol. 45, No.10, Oct. 2009, pp. 4668-4671.
[146] Zhigang Zhao, Fugui Liu, S. L. Ho, W. N. Fu and Weili Yan, “Modeling Magnetic Hysteresis Under
DC-Biased Magnetization Using the Neural Network,” IEEE Trans. Magn., Vol.45, No.10, Oct.
2009, pp. 3958-3961.
[147] S. L. Ho, Junhua Wang, W. N. Fu, and Y. H. Wang, “A novel crossed traveling wave induction
heating system and finite element analysis of eddy current and temperature distributions,” IEEE
Trans. Magn., Vol.45, No.10, Oct. 2009, pp.4777-4780.
[148] Y. B. Li, S. L. Ho, W. N. Fu, and B. F. Xue, “Analysis and solution on squeak noise of small
permanent-magnet DC brush motors in variable speed applications,” IEEE Trans. Magn., vol. 45, no.
10, pp. 4752-4755, Oct. 2009.
[149] Y. B. Li, S. L. Ho, W. N. Fu, and W. Y Liu, “An interpolative finite-element modeling and the
starting process simulation of a large solid pole synchronous machine,” IEEE Trans. Magn., vol. 45,
no. 10, pp. 4605-4608, Oct. 2009.
[150] N. N. Chen, S. L. Ho, and W. N. Fu, “An efficient two-grid finite element method of 3-D nonlinear
magnetic-field computation,” IEEE Trans. Magn., vol.45, no.10, Oct. 2009, pp. 4797-4800.
[151] S. L. Ho, Guizhi Xu, W. N. Fu, Qingxin Yang, Huijuan Hou, and Weili Yan, “Optimization of Array
Magnetic Coil Design for Functional Magnetic Stimulation Based on Improved Genetic Algorithm,”
IEEE Trans. Magn., Vol.45, No.10, Oct. 2009, pp. 4849-4852.
[152] Guizhi Xu, Zhang Xiu, Siu-lau Ho, Weinong Fu, Weili Yan and Youhua Wang, “Complexity
Analysis of Magnetic Stimulation at Acupoint of Zusanli(St36)on EEG,” IEEE Trans. Magn.,
Vol.45, No.10, Oct. 2009, pp. 4829-4832.
[153] D. Lin, S. L. Ho and W. N. Fu, “Analytical Prediction of Cogging Torque in Surface-Mounted
Permanent-Magnet Motors,” IEEE Trans. Magn., Vol.45, No.9, September 2009, pp. 3296-3302.
[154] W. N. Fu and S. L. Ho, “Error estimation for the computation of force using the virtual work method
on finite element models,” IEEE Trans. Magn., vol. 45, no. 3, March 2009, pp. 1388-1391.
[155] W. N. Fu and S. L. Ho, “Enhanced nonlinear algorithm for the transient analysis of magnetic field
and electric circuit coupled problems,” IEEE Trans. Magn., vol. 45, no. 2, pp. 701-706, Feb. 2009.
[156] D. Lin, P. Zhou, W. N. Fu, B. Ionescu and Z. J. Cendes, “A Flexible Approach for BrushCommutation Machine Simulation,” IEEE Trans. Magn. Vol.44, No.6, June 2008, pp. 1542-1545.
[157] P. Zhou, D. Lin, W. N. Fu, B. Ionescu and Z. J. Cendes, “A general cosimulation approach for
coupled field-circuit problems,” IEEE Trans. Magn., vol. 42, no. 4, pp. 1051-1054, April 2006.
[158] D. Lin, P. Zhou, Z. Badics, W. N. Fu, Q. M. Chen and Z. J. Cendes, “A New Nonlinear Anisotropic
Model for Soft Magnetic Materials,” IEEE Trans. Magn. Vol.42, No.4, April 2006, pp. 963-966.
[159] W. N. Fu, P. Zhou, D. Lin, S. Stanton and Z. J. Cendes, “Magnetic Force Computation in Permanent
Magnets Using a Local Energy Coordinate Derivative Method,” IEEE Trans. Magn. Vol.40, No.2,
March 2004, pp. 683-686.
[160] W. N. Fu, P. Zhou, D. Lin, S. Stanton and Z. J. Cendes, “Modeling of solid conductors in twodimensional transient finite-element analysis and its application to electric machines,” IEEE Trans.
Magn., vol. 40, no. 2, pp. 426-434, March 2004.
[161] P. Zhou, W. N. Fu, D. Lin, S. Stanton and Z. J. Cendes, “Numerical Modeling of Magnetic
Devices,” IEEE Trans. Magn. Vol.40, No.4, July 2004, pp. 1803-1809.
[162] D. Lin, P. Zhou, W. N. Fu, Z. Badics and Z. J. Cendes, “A dynamic core loss model for soft
ferromagnetic and power ferrite materials in transient finite element analysis,” IEEE Trans. Magn.
vol. 40, no. 2, pp. 1318-1321, March 2004.
[163] W. N. Fu, S. L. Ho, H. L. Li and H. C. Wong, “An Improved Nodal Method for circuit and Multislice Magnetic Field Coupled Finite Element Analysis,” Electric Power Components and Systems,
Taylor & Francis, vol. 32, no. 7, July 2004, pp. 671-689.
[164] W. N. Fu, S. L. Ho, H. L. Li and H. C. Wong, “A multislice coupled finite-element method with
uneven slice length division for the simulation study of electric machines,” IEEE Trans. Magn., vol.
39, no. 3, pp. 1566-1569, May 2003.
[165] W. N. Fu, S. L. Ho, H. L. Li, and H. C. Wong, “A Versatile Finite Element Model of Electric
Machines,” Electric Power Components and Systems, Taylor & Francis, vol. 31, no. 10, October,
2003, pp. 941-966.
[166] W. N. Fu and Z. J. Liu, “Estimation of the Eddy-current Loss in the Permanent Magnets of Electric
Motors Using Network-field Coupled Multi-slice Time Stepping Finite Element Method,” IEEE
Trans. Magn. Vol.38, No.2 March 2002, pp. 1225-1228.
[167] W. N. Fu, Z. J. Liu and C. Bi, “A Dynamic Model of the Disk Drive Spindle Motor and its
Applications,” IEEE Trans. Magn. Vol.38, No.2 March 2002, pp. 973-976.
[168] W. N. Fu, S. L. Ho, and H. L. Li, H. C. Wong, “An Effective Method to Reduce the Computing
Time of Nonlinear Time-Stepping Finite-Element Magnetic Field Computation,” IEEE Trans. Magn.
Vol.38, No.2 March 2002, pp. 441-444.
[169] W. N. Fu, S. L. Ho and H. C. Wong, “Design and Analysis of Practical Induction Motors,” IEEE
Trans. Magn. Vol.37, No.5, September 2001, pp. 3663-3667.
[170] Longya Xu and W. N. Fu, “Evaluation of Third Harmonic Component Effects in 5-Phase
Synchronous Reluctance Motor Drive Using Time Stepping Finite Element Method,” IEEE Trans.
Industry Application, Vol.38, No.3, May/June 2002, pp. 638-644.
[171] S. L. Ho, W. N. Fu, H. L. Li, H. C. Wong and H.Tan, “Performance Analysis of Brushless DC
Motors Including Features of the Control Loop in the Finite Element Modeling,” IEEE Trans. Magn.
Vol.37, No.5, September 2001, pp. 3370-3374.
[172] S. L. Ho, Minrui Fei, W. N. Fu, H. C. Wong and Edward W. C. Lo, “Integrated RBF Network
Based Estimation Strategy of the Output Characteristics of Brushless D.C. Motor,” IEEE Trans.
Magn. Vol.38, No.2 March 2002, pp. 1033-1036.
[173] S. L. Ho and W. N. Fu, “Analysis of Indirect Temperature-Rise Tests of Induction Machines Using
Time Stepping Finite Element Method,” IEEE Trans. Energy Conversion, Vol.16, No.1, March 2001,
pp. 55-60.
[174] S. L. Ho, H. L. Li, W. N. Fu and H. C. Wong, “A Novel Approach to Circuit-Field-Torque Coupled
Time Stepping Finite Element Modeling of Electric Machines,” IEEE Trans. Magn. Vol.36, No.4,
July, 2000, pp. 1886-1889.
[175] S. L. Ho, W. N. Fu and H. C. Wong, “Thermal Study of Induction Motors by Phantom Loading
Using Multi-slice Time Stepping Finite Element Modelling,” IEEE Trans. Magn. Vol.35, No.3,
May, 1999, pp. 1606-1609.
[176] S. L. Ho, W. N. Fu and H. C. Wong, “Generation and Rotation of 3-D Finite Element Mesh for
Skewed Rotor Induction Motors Using Extrusion Technique,” IEEE Trans. Magn. Vol.35, No.3,
May, 1999, pp. 1266-1269.
[177] S. L. Ho, H. L. Li and W. N. Fu, “Inclusion of Inter-bar Currents in a Network-field Coupled Time
Stepping Finite Element Model of Skewed Rotor Induction Motors,” IEEE Trans. Magn Vol.35,
No.5, Sept., 1999, pp. 4218-4225.
[178] S. L. Ho, W. N. Fu and H. C. Wong, “Direct Modeling of the Starting Process of Skewed Rotor
Induction Motors Using a Multi-Slice Technique,” IEEE Trans. Energy Conversion, Vol.14, No.4,
December 1999, pp. 1253-1258.
[179] S. L. Ho, W. N. Fu and H. C. Wong, “Solution of a 3-D complex finite element model of skewed
rotor induction motors using an iterative method,” IEEE Trans. Energy Conversion, Vol.14, No.4,
December 1999, pp. 1247-1252.
[180] S. L. Ho, W. N. Fu and H. C. Wong, “Estimation of Stray Losses of Skewed Induction Motors Using
Coupled 2-D and 3-D Time Stepping Finite Element Methods,” IEEE Trans. Magn., Vol.34, No.5,
September, 1998, pp. 3102-3105.
[181] S. L. Ho and W. N. Fu, “Review and Further Application of Finite Element Methods in Induction
Motors,” Electric Machines and Power Systems, Taylor & Francis, Vol.26, No.2, 1998, pp. 111-125.
[182] S. L. Ho and W. N. Fu, “A Comprehensive Approach to the Solution of Direct-coupled Multi-Slice
Model of Skewed Induction Motors Using Time Stepping Eddy-Current Finite Element Method,”
IEEE Trans. Magn. Vol.33, No.3, May, 1997, pp. 2265-2273.
[183] S. L. Ho, W. N. Fu and H. C. Wong, “Application of Automatic Choice of Step Size for Time
Stepping Finite Element Method to Induction Motors,” IEEE Trans. Magn. Vol.33, No.2, March,
1997, pp. 1370-1373.
[184] S. L. Ho, W. N. Fu and H. C. Wong, “An Incremental Method for Studying the Steady State
Performance of Induction Motors Using Time Stepping Finite Element Model,” IEEE Trans. Magn.
Vol.33, No.2, March, 1997, pp. 1374-1377.