2703392 rev2 tydom 1000 - 2000 en_Mise en page 1 21/05/2013 15:52 Page 1
-
2
Components provided
Depending on your device: Connect to Google Play or the App Store
Find the “iTYDOM 1000” app or “iTYDOM 2000”
Download the application
Activate the Wi-Fi connection on the smartphone / tablet
?
Log in
3
TYDOM 1000
TYDOM 2000
_
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
a/A
123
Ethernet cable
+
DEMO
A
B
ADSL BOX
?
Log in
Ethernet
cable
2
123456
ADSL BOX
345
FFFF12
001A25
MAC :
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
a/A
123
6
+
MAC : 001A25FFFF123456
1
DEMO
Green LED
OK
1
Red LED
No Ethernet cable connected
ADSL BOX
1
2
Flashing orange LED
Awaiting IP allocation (DHCP)
1
Ethernet cable
LEDs off
No power supply
LED off
IP allocated, awaiting
connection of the application
Green LEDs
230 V power supply OK
Green LED
Application connected
1. The home page screen
2. The control screen
You can access the application’s functions
by touching the screen. Press the function
you require.
Access to
functions
Home automation gateway for smartphone and tablet application
TYDOM 1000
TYDOM 2000
Local control
Local and remote control
TYDOM 1000
Back
Shutters
Lighting
Heating
Garage
Gate
Alarm
User guide
Configuration
All
1
Scenarios
Rooms
Raise
Control of
all shutters
in the group
Others
Application compatible with iOS and Google play (Android)
All
Current
status
Shutter 2
Shutter
control 1
EN
Lower
Stop
Shutter 2
Current function status displayed.
Example:
Shutter
control 2
All shutters
are closed
All shutters
are open
3. The functions of the application
Functions
Configuration
OFF
Roller
shutters
Settings
The quality of your product's connection may be adversely affected by changes to the IP
architecture on which it operates.
These changes may include, but are not limited to, changes of hardware, software
updates and configuration operations concerning your operator's equipment or any other
multimedia equipment such as tablets, smartphones, etc.
Because of changes in standards and equipment,
the characteristics given in the text
and the illustrations in this document are not
binding unless confirmed
Delta Dore hereby declares that the equipment
meets the essential requirements and complies
with the other relevant provisions of Directive
1999/5/EC (R&TTE Directive) (wireless)
*2703392_Rev.2*
Android™ and Google Play are registered trademarks of Google Inc.
IOS™ is a registered trademark of Cisco Systems Inc.
Available for access
levels 2 and 3. (*)
Lighting
Garage
Gate
Heating
and
Cooling
Alarm
Other
uses
The various functions of the application enable you to:
• Create control groups,
• Add and delete products (access level 3).
N.B.: Locking levels 1 and 2 only display the configured icons.
To get the most out of your application
Scenarios: Combine actions selected for different functions:
Roller shutters, lighting, etc. (away scenario: Shutters closed, lights off.
Arrival scenario: shutters open)
Management of controls by room: Group together controls for the same room.
(example: Lounge - 3 lights - 2 roller shutters).
www.deltadore.com
Management of controls by group: Group together controls with the same functions. (e.g.
all roller shutters on the ground floor).
4. Key to pictograms
?
Help display
Previous screen
Confirmation
Next screen
Configuration
button
Previous page
Back
(Holding the button down displays
the home page)
i
Swipe your finger up or
down to increase or
decrease
3 locking levels to protect your configuration ( )
*
Pulse control
1
Changes not allowed
Command executed
correctly
2
Customisation of the buttons, scenarios and rooms
Next page
Fault warning
Information
Open entry
3 * Addition and deletion of RF products possible
* Installer access code required
5. Applications
South-facing
shutter group
Group
Total
Bedroom
Paul
Arrival
OFF
80 %
60 %
80 %
18.5 °C
0%
0%
2703392 rev2 tydom 1000 - 2000 en_Mise en page 1 21/05/2013 15:52 Page 2
1
ON
2
1 16
17 32
OFF
OFF
230V~
50/60 Hz
1
> 3"
1
Start
2
1
2
3
4
OK
OFF
OFF
... ... ...
Name
1
Locate
Choose a pictogram
2
1
3
4
2
Alarm
OFF
1234
OFF
1
2
Continue
(Default)
3
ON
i
1 234
5 67
Access code
installer
OFF
Menu
“Add
a product”
Bip
After configuration is complete, it is a good idea to customise your installer access code.
Advanced
settings
NEW
NEW X2
****
****
Installer
access code
Lock
1234
(Default)
Protect your configuration by choosing an appropriate access level (level 1 or 2 recommended)
4
Advanced
settings
Lock
Access level
1
No changes are allowed during use (1)
2
Customisation of the buttons, scenarios and rooms (1)
3
Addition and deletion of RF products possible
1
Fixed IP address
2
ADSL box settings
3
Connection test (2)
(1): Locking levels 1 and 2 only
display the configured
icons.
Remote connection assistant (only for TYDOM 2000)
5
T YDOM
2000
?
Advanced
settings
Connection
Remote access
(2) : If the connection fails, a
troubleshooting page is
displayed.
You can visit the help section for the displayed page at any time by pressing this symbol.
7. Block diagram
Save function
Copy function
Save
The
button
allows you to memorise your settings
and customisation.
Copy
The
button
allows you to duplicate your settings
on other smartphones and tablets.
Settings
Regional
parameters
Parameters
Language
Software
versions
New group
Choose a
pictogram
Name
Add products
Group total
Advanced
settings
Lock
Access level
1
2
3
Name
Delete
products
Name
Choose a
pictogram
Delete
all products
Choose a
pictogram
Manage the list
of product
Locate
Delete the
group
Group 1
Networks
maintenance
Installer
access code
****
User
access codes
****
Status of functions
on the homepage
Point 2
Activated
Yes
Overall heat
Data
transfer
Select
products
Deactivated
No
Association mode
Save
Copy
Replace
TYDOM
Scenarios
Alarm initialisation
Yes
No
Application initialisation
Yes
No
TYDOM initialisation
Yes
No
Initialisation
New scenario
Name
Scenario 1
Name
Choose a
pictogram
Select
products
Select
states
Choose a
pictogram
Manage the list
of product
Remote access
Connection
T YDOM
2000
Password
Modify states
****
Delete
the scenario
OFF
Rooms
Alarm
Manage the
products
*
Group total
Manage
the partials
Warning device
test
Add
products
P1
Delete
a product
P2
Delete
all products
*
New room
Name
Room 1
Name
No
Point
P4
Select
products
Choose a
pictogram
Manage the list
of product
P3
Download
Choose a
pictogram
Customised
wording
Delete the room
Yes
Pre-defined
wording
Name
List of
detectors
The Heating and Cooling function control screen
Choose
wording
*
Add a
detector
Choose
number
Back
Heating Mode
* Choose an element from the list or press the associated product's test button.
The Alarm function control screen
Heating
Off mode
Off
Air conditioning
mode
Information
Alarm
Back
Configuration
Heating
AC
General
General control
Day zone
Day zone control
Configuration
Fault
warning
Open entry
1
Alarm status
3 types of control depending on your installation
Adjustment by setting
Adjustment by mode
°C
On
ON
Monitoring in progress
Off
OFF
Shutdown surveillance
Partial
1
Partial operating modes
ON OFF
Economy
18.5°C
Setting
On-Off selection
Pilot wire
Off
On-Off