ADDITIONS TO THE LIBRARY
BOOKS & STANDARDS
VOL.53 NO.1 JANUARY 2015
BUREAU OF INDIAN STANDARDS (New Delhi). IS 10101-2012. Information and
documentation – International standard serial number (ISSN). The Bureau, New Delhi, 2012.
Acc. No. 801349
BUREAU OF INDIAN STANDARDS (New Delhi). IS 9835-3-2012. Series capacitors for power
systems. Part 3: Internal fuses. The Bureau, New Delhi, 2012.
Acc. No. 801350
BUREAU OF INDIAN STANDARDS (New Delhi). IS 3196-3-2012. Welded low carbon steel
cylinders exceeding 5 litre water capacity for low pressure liquefiable gases. Part 3: Methods of test.
The Bureau, New Delhi, 2012.
Acc. No. 801352/1
BUREAU OF INDIAN STANDARDS (New Delhi). IS 12879-1-2012. Microfilming of technical
drawings and other drawing office documents. Part 1: Operating procedures. The Bureau, New Delhi,
2012.
Acc. No. 801353
BUREAU OF INDIAN STANDARDS (New Delhi). IS 13730-0-6-2012. Specifications for
particular types of winding wires. Part 0: General requirements. Section 6: Glass-fibre wound resin or
varnish impregnated, bare of enamelled round copper wire. The Bureau, New Delhi, 2012.
Acc. No. 801354
BUREAU OF INDIAN STANDARDS (New Delhi). IS 15961-2012. Hot dip aluminium-zinc alloy
metallic coated steel strip and sheet (Plain). The Bureau, New Delhi, 2012.
Acc. No. 801389
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (Geneva). ISO 21500-2012.
Guidance on project management. The Organization, Geneva, 2012.
Acc. No. 801356/2
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (Geneva). ISO 230-1-2012.
Test code for machine tools – Part 1: Geometric accuracy of machines operating under no-load or
quasi-static conditions. The Organization, Geneva, 2012.
Acc. No. 801361
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (Geneva). ISO 11039-2012.
Surface chemical analysis – Scanning – probe microscopy – Measurement of drift rate. The
Organization, Geneva, 2012.
Acc. No. 801394
BRITISH STANDARDS INSTITUTION (London). BS EN 13481-3-2012. Railway applications –
Track – Performance requirements for fastening systems. Part 3: Fastening systems for wood
sleepers. The Institution, London, 2012.
Acc. No. 801364
BRITISH STANDARDS INSTITUTION (London). BS EN 13481-5-2012. Railway applications –
Track – Performance requirements for fastening systems. Part 5: Fastening systems for slab track with
rail on the surface or rail embedded in a channel. The Institution, London, 2012.
Acc. No. 801365
BRITISH STANDARDS INSTITUTION (London). BS EN 13481-7-2012. Railway applications –
Track – Performance requirements for fastening systems. Part 7: Special fastening systems for
switches and crossings and check rails. The Institution, London, 2012.
Acc. No. 801366
BRITISH STANDARDS INSTITUTION (London). BS EN 13481-1-2012. Railway applications –
Track – Performance requirements for fastening systems. Part 1: Definitions. The Institution, London,
2012.
Acc. No. 801368
MINISTRY OF DEFENCE, GOVERNMENT OF INDIA (New Delhi). JSS 5306-07-2012.
Round (Button) head bolt 3052 A. The Ministry, New Delhi, 2012.
Acc. No. 801402
MINISTRY OF DEFENCE, GOVERNMENT OF INDIA (New Delhi). JSS 9650-04-2012.
Low and high alloy steel investment casting. The Ministry, New Delhi, 2012.
Acc. No. 801403
NATIONAL FIRE PROTECTION ASSOCIATION (USA). NFPA 70 E-2012. Standard for
electrical safety in the workplace. The Association, USA, 2012.
Acc. No. 801370/P
NATIONAL FIRE PROTECTION ASSOCIATION (USA). NFPA 2112-2012. Standard on flameresistant garments for protection of industrial personnel against flash fire. The Association, USA,
2012.
Acc. No. 801371/P
NATIONAL FIRE PROTECTION ASSOCIATION (USA). NFPA 2113-2012. Standard on
selection, care use, and maintenance of flame- resistant garments for protection of industrial personnel
against flash fire. The Association, USA, 2012.
Acc. No. 801372/P
AMERICAN SOCIETY FOR TESTING AND MATERIALS (USA). ASTM Section 3- Metals
test methods and analytical procedures. Volume 03.01: Metals- Mechanical testing; Elevated and
low-temperature tests; Metallography. The Society, USA, 2012.
Acc. No. 801373/P
AMERICAN SOCIETY FOR TESTING AND MATERIALS (USA). ASTM Section 3- Metals
test methods and analytical procedures. Volume 03.02: Corrosion of metals; Wear and erosion. The
Society, USA, 2012.
Acc. No. 801374/P
AMERICAN SOCIETY FOR TESTING AND MATERIALS (USA). ASTM
Construction. Volume 04.10: Wood. The Society, USA, 2012.
Section 4-
Acc. No. 801375/P
AMERICAN SOCIETY FOR TESTING AND MATERIALS (USA). ASTM Section 9- Rubber.
Volume 09.01: Rubber, natural and synthetic- General test methods; Carbon Black. The Society,
USA, 2012.
Acc. No. 801376/P
AMERICAN SOCIETY FOR TESTING AND MATERIALS (USA). ASTM Section 9- Rubber.
Volume 09.02: Rubber, products, industrial – Specifications and related test methods; Gaskets; Tires.
The Society, USA, 2012.
Acc. No. 801377/P
AMERICAN SOCIETY FOR TESTING AND MATERIALS (USA). ASTM Section 14- General
methods and instrumentation. Volume 14.02: General test methods; Forensic psychophysiology;
Forensic sciences; Conformity assessment; Statistical methods; Nanotechnology; Forensic
engineering; Manufacture of pharmaceutical products. The Society, USA, 2012.
Acc. No. 801378/P
AMERICAN SOCIETY FOR TESTING AND MATERIALS (USA). ASTM Section 14- General
methods and instrumentation. Volume 14.03: Temperature measurement. The Society, USA, 2012.
Acc. No. 801379/P
sAMERICAN SOCIETY FOR TESTING AND MATERIALS (USA). ASTM Section 15General products, chemical specialties, and end use products. Volume 15.10: Packaging; Flexible
barrier packaging. The Society, USA, 2012.
Acc. No. 801382/P
AMERICAN SOCIETY FOR TESTING AND MATERIALS (USA). ASTM Section 15- General
products, chemical specialties, and end use products. Volume 15.05: Engine coolants; Halogenated
organic solvents and fire extinguishing agents; Industrial and specialty chemicals. The Society, USA,
2012.
Acc. No. 801383/P
AMERICAN SOCIETY FOR TESTING AND MATERIALS (USA). ASTM Section 15- General
products, chemical specialties, and end use products. Volume 15.06: Adhesives. The Society, USA,
2012.
Acc. No. 801384/P