excelon® “vs” - Legion Lighting

advertisement
EXCELON® “VS”
Very Shallow 2' x 4'
Series
J9724
APPLICATIONS
The EXCELON® series of static troffers are designed and precision
engineered to meet the highest
quality standard for today’s discriminating specifier. Offering the widest
choice of lamp diffuser configurations. Exclusive “LIGHT-LOCK™”
design and positive hinging and high
efficiency makes this the ideal troffer
for offices, schools, stores, and aII
general lighting requirements.
QUICK WIRE ACCESS PLATE
2 LAMPS
21/2"
23 3/4" x 47 3/4"
QUICK WIRE ACCESS PLATE
3 LAMPS
QUICK WIRE ACCESS PLATE
4 LAMPS
SPECIFICATIONS
HOUSING: Die formed of 20 ga. cold rolled steel, rigidly fabricated,
and electrically welded to insure true and perfect alignment.
SOCKET PLATE: Die formed of heavy ga. cold rolled steel, securely
mounted and readily removable for socket maintenance.
WIREWAY: Die formed of heavy gauge cold rolled steel, removable
without the use of tools for ballast maintenance.
DOOR: Die formed of heavy 19 gauge cold rolled steel, electrically
welded throughout with concealed corner gussets at corner joints for
strength and rigidity, with exclusive “LIGHT-LOCK™” design for light
tight fit to housing. Door hinges from either side on concealed T-slot
hinges and is secured in the closed position by positive locking lever
latches allowing access to the interior without the use of tools.
ELECTRICAL: 2, 3 and 4 lamps, T5 rapid quick-start 430MA
Electronic High Power Factor, Class “A” sound rated, <10% THD (less
than 10% Total Harmonic Distortion). U.L. and CSA, FCC listed
Type 1 for 118V 60 Hz operation. Other voltages and frequencies
available, CONSULT FACTORY.
EXCELON® is a trademark of LEGION LIGHTING CO., INC.
LEGION® is a registered trademark of LEGION LIGHTING CO., INC.
MOUNTING: Designed to integrate into most standard lay-in grid and
fineline ceilings (Requires Fineline clips, suffix “FCC”). Unit rests on
the flanges of the exposed tee. Fine Line clips are supplied on units
used in Donn-Fine Line type ceilings. See ceilings and specify type.
Knockouts and wiring access plate are provided on back, with additional knockouts on ends for feed and thru-wiring.
FINISH: All steel component parts are completely protected against
rust and discoloration after fabrication through an automated
conveyorized multi-stage phosphate bonding process. Finished with
an electrostatic baked white polyester thermosetting powder coating. This electronic computer controlled integrated system assures
consistent 88% reflectance efficiency and maximum durability.
CERTIFICATION: The EXCELON® “VS” Series is U.L. and C.U.L. listed
and bears the label of the I.B.E.W./AFL-CIO, Local #3. Optionally
listed for damp locations “DL”.
Exclusive LIGHTLOCK™
design for tight light fit
of door to housing.
Diffuser inserted without
the use of tools.
3/07
®
Section B - Page 13
L I G H T I N G
C O.,
I N C.
221 Glenmore Ave., Brooklyn, NY 11207 • Tel: 718/498-1770 • Fax: 718/498-0128
E-mail: sales@legionlighting.com • Website: www.legionlighting.com • Toll Free Fax: 800/4-LEGION
Series J9724
Very Shallow 2' x 4'
OPTIONS
O R D E R I N G D ATA
Nom.
Size
2x4
EXCELON® “VS”
No. and
Type Lamps
2-F28-T5
2-F54HO-T5
3-F28-T5
3-F54HO-T5
4-F28T5
4-F54HO-T5
Weight
28
29
30
Catalog No.
J9724-224
J9724-254HO
J9724-324
J9724-354HO
J9724-424
J9724-454HO
Suffix “DIM” after catalog no. for dimming ballast.
Suffix “LT” after catalog no. for cold weather ballast.
Suffix “EM” after cat. no. for emerg. battery pack, see price list for
types and consult factory.
Suffix “DL” after catalog no. for damp location.
FOR CEILINGS THAT REQUIRE A FLANGE TRIM CONSULT
FACTORY FOR FLANGE KIT.
SHIELDING MEDIA
Type
Type
Type
Type
Type
Type
Type
Type
(RFA) acrylic plastic refractor.
(FA) flat white acrylic.
(K19A) KSH K19 acrylic lens.
(K20A) KSH K20 acrylic lens.
(PWA) 1/2" cube Parawedge specular silver louver-acrylic.
(PAFA) 5/8" cube Paraflex specular silver louver-acrylic.
(PAFIVA) 3/4"x 3/4"x 1/2" deep Paraflex specular silver louver-acrylic.
(PL3A) 3/4"x 3/4"x 1/2" deep high efficiency specular silver louver-acrylic.
Consult factory for additional Shielding Media available.
CEILINGS – SPECIFY TYPE
Type (J) Exposed inverted “T ” ceiling.
Type (J) Concealed inverted “T ” ceiling.
Type (J) Exposed inverted “T ”, Tegular ceiling.
Type (J) Exposed inverted “T ”, Fineline ceiling. (Requires Fineline clips) suffix FLC.
(J) Exposed (J) Concealed troffers: The corners of the ceiling opening should be well
supported to withstand the weight of the troffer.
EXPOSED “T” BAR
Type “J” Lay-in
CONCEALED “T” BAR
Type “J” Lay-in
FINE LINE
Type “J” Lay-in
NOTE: For ceilings that require a Flange Trim, consult factory for
availability of a FLANGE KIT.
®
Information supplied primarily for illustrative purposes, subject to change.
Consult factory for verification and minimum quantity orders.
Section B- Page 14
L I G H T I N G
C O.,
I N C.
Download