Customer: Date: Project: Qty: Type: Kju Square LED Direct Order Code: KJUS LI KJUS - - - LI - Series KJUS Light Engine 1A701 1A551 1A401 CCT 30 35 40 Shielding LI Mounting RF Finish WH Voltage 120 - - - - Kju Square Direct 2015 lm 20W 3000K 1583 lm 15.8W 3500K Values based on 3500K option and standard driver. 1 1151 lm 11.5W 4000K Clear PMMA lens with LED optimized diffuser Recessed Flanged RL Recessed Flangeless SR SemiRecessed RT Recessed 2x2 Tile C Cable S Swivel Stem RS Rigid Stem F Surface Mount Custom colors are available, Please consult factory White 120 Volt 277 UNV 277 Volt 120 thru 277 50/60hz capable DML DMD 120V only Not available with 1A55 Consult factory for lead time 2 Dimming Options DM eldoLED 0-10V (Linear) eldoLED 0-10V (Logarithmic) eldoLED DALI (Logarithmic) DC22 Lutron 2-Wire DC32 Lutron 3-Wire DCE2 Lutron EcoSystem DC52,3,4 Lutron 5-Series 3 4 The standard (default) driver is 0-10V capable, please see page 5 for additional details. * Emergency Options EC UL924 compliance for Emergency Wiring DL Damp Location Product Modifications Approvals Please list modification requirements for review by factory: 5 YEAR LED WARRANTY ARRA Compliant ADA Compliant Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions. Date: Page 1 of 7 (Rev. 11/2015) KJU_Direct_v.2.3 Kju Square LED Direct 11 9/16” (293 mm) 11 9/16” 11 9/16” (293 mm) (293 mm) 2 5/8” (67 mm) Construction: Housing / Geartray – Low copper die cast aluminum. Shielding – Precision-edge, clear PMMA body with LED optimized opal diffuser. Mounting – Recessed Flanged (RF) to be used with Sheetrock or in center of 2x2 T-bar grid ceiling, Recessed Flangeless (RL) for Sheetrock ceilings, Semi-Recessed (SR), or Recessed 2x2 Tile (RT). RT mounting can be used with either 9/16” or 15/16” T-bar ceiling systems. Also available with Cable Mount (C), Swivel Stem (S), Rigid Stem (RS), or Surface Mount (F). Surface Mount and Semi-Recessed can be mounted to a wall with proper blocking by others. Standard lengths for cable and stem mount is 48”. See pages 3 - 4 for details on mountings. Kju Square is also available with Direct/Indirect light distribution - see Kju Square Direct/Indirect spec sheet for details. Electrical/Performance: Luminaire Finish: LED Light Engine - Brand-name mid-power LEDs create a high efficiency LED light engine able to provide a lumen maintenance of 79.9% at 50,000 hours and 76% at 60,000 hours per TM-21 report. Powdercoat - All Selux luminaries are finished in high quality polyester powder coating in our Tiger Drylac certified facility and are tested in accordance with test specifications for coatings from ASTM and PCI. LED Life - Calculated L70 greater than 78,000 hours and Reported L70 Greater than 60,000 hours @ 25°C per TM-21 Delivered Lumens - Due to LED manufacturer’s tolerances the listed output has a ±5% tolerance. All products undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated, and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention. CCT - Available in 3000K, 3500K, and 4000K; tolerance within a 3-step MacAdam ellipse. Standard color is White (WH). Custom colors are available. CRI - Min. 80 Warranty: All Drivers - High efficiency, constant current, soft start, Electronic Class 2 with a PFC>0.90. For more detailed information on the available drivers please see page 7. Thermal Performance: Ambient Operating Temperature – Luminaires suitable for Max. ambient temperature of 35° C (95° F) for all drivers, standard and optional. Min. ambient temperature of: -20°C (-4°F) for the Standard DM and optional DML and DMD drivers 0°C (32°F) for the optional DC2, DC3, DCE, and DC5 drivers. 5 Year Limited LED Luminaire Warranty Selux offers a 5 Year Limited Warranty to the original purchaser that the Kju LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED light engine when installed according to Selux instructions and operated within the Ambient Temperature. For additional details and exclusions, see “Selux Terms and Condition of Sale”. Certifications and Compliance: NRTL-For Damp Location (i.e. cULus;cCSAus) ADA Compliant RoHS Compliant ARRA Compliant IC-Rated Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions. Page 2 of 7 (Rev. 11/2015) KJU_Direct_v.2.3 Kju Square LED Direct Mounting Recessed 2 x 2 Tile (RT) Recessed Flangeless (RL) Recessed Flange (RF) 1’-11 3/4” (603 mm) 1’ - 5 1/2” 1’ - 5 1/2” (445 mm) (445 mm) 1’ - 1 7/8” (353 mm) 1’-11 3/4” (603 mm) 1’ - 4 1/2” (419 mm) 1 9/16” 8 1/8” (40 mm) (207 mm) 2 5/8” (67 mm) /” 3 4 (19 mm) 1’-11 3/4” / ” (15 mm) 13 16 / ” (21 mm) 9 16 4” (101 mm) (603 mm) 1’ - 1 7/8” (353 mm) 1’ - 1 3/8” (340 mm) Semi-Recessed (SR) 11 9/16” (293 mm) 8 1/8” (207 mm) 10 3/4” (273 mm) 8 13/16” (224 mm) 2 1/4” (57 mm) 3 9/16” (91 mm) 11 9/16” (293 mm) Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions. Page 3 of 7 (Rev. 11/2015) KJU_Direct_v.2.3 Kju Square LED Direct Mounting Rigid Stem (RS) and Swivel Stem (S) Cable (C) XXx9/xxx /xx”” 11 /16” 11 9/16” (xxmm) (xxmm) (293 mm) (293 mm) 11 9/16” (293 mm) Surface (F) 8 1/4” (209 mm) 11 9/16” (293 mm) 11 9/16” (293 mm) 11 9/16” (293 mm) 2 5/8” (67 mm) 3 3/8” (85 mm) 11 9/16” (293 mm) xx” X 9x/16 ” 11 (xxmm) (293 mm) 2 5/8” (67 mm) 11 9/16” (293 mm) Kju Cable (C) Suspension detail Kju Rigid Stem (RS) Suspension detail Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions. Page 4 of 7 (Rev. 11/2015) KJU_Direct_v.2.3 Kju Square LED Direct Standard Driver: eldoLED 0-10V linear dimming Fixtures supplied with driver capable of either normal switched operation or 0-10V dimming for linear dimming curve.Fixtures ship with the dimming leads capped, for dimming operation un-cap the wires. Minimum dimming level preset at factory to 1%. Max. inrush current per driver 30mA2s and 0-10V control current max 2mA per driver. Optional eldoLED Dimming Drivers: Optional LUTRON Dimming Drivers: eldoLED 0-10V linear dimming (DM) Luminaires supplied with soloDRIVE 0-10V dimming driver for linear dimming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult Selux. Max. inrush current per driver 30mA2s and 0-10V control current max 2mA per driver. LUTRON 2-wire dimming (DC2) Luminaires supplied with A-series 2-wire dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult Selux. Minimum dimming level down to 1%. Inrush current per driver < 2A. eldoLED 0-10V logarithmic dimming (DML) Luminaires supplied with soloDRIVE 0-10V dimming driver for logarithmic dimming curve. Minimum dimming level preset at factory to 1%. For a minimum dimming level down to 0.1%, please consult Selux. Max. inrush current per driver 30mA2s and 0-10V control current max 2mA per driver. LUTRON 3-wire dimming (DC3) Luminaires supplied with A-series 3-wire dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult Selux. Minimum dimming level down to 1%. Inrush current per driver < 2A. eldoLED DALI dimming (DMD) Luminaires supplied with soloDRIVE DALI dimming driver. Minimum dimming level preset at factory to 1%. For a minimum dimming level down to 0.1 %, please consult Selux. Inrush current per driver 30mA2s. LUTRON EcoSystem dimming (DCE) Luminaires supplied with A-series EcoSystem (4 wire, digital link) dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult Selux. Minimum dimming level down to 1 %. Inrush current per driver < 2A. *For control recommendation for eldoLED drivers, please contact eldoLED. LUTRON 5-series dimming (DC5) Luminaires supplied with 5-series EcoSystem dimming driver programmed for constant current reduction (CCR). Minimum dimming level down to 5%. Inrush current per driver <2A. **For control recommendation and system layout for LUTRON drivers, please contact LUTRON. Wiring Diagrams Standard - 0-10V (Linear) dimming capable Feed Standard Wiring supplied for all drivers. Driver -The following wire(s) are in addition to the std. above- Green White Black *Grey (-) *Purple (+) 0-10V Dimming for Standard driver DM Optional Dimming - 0-10v Logarithmic (DML) DALI Logarithmic (DMD) Feed DML & DMD Driver Green White Black Grey (-) Purple (+) Optional Dimming - Lutron 2-Wire (DC2) Feed Green White Black Green = Ground White = Neutral Black = Hot Driver Green White Black Orange *Grey and Purple feed wires are capped at the factory for non-dimming operation. For 0-10v dimming operation remove the caps on the Grey and Purple wires. Grey = (-) Dali or 0-10V Dimming control Purple = (+) Dali or 0-10V Dimming control DC2 No additional wires DC3 Orange = 3-Wire Dimming control DCE Violet = "E1" Digital Link Dimming control Violet / White = "E2" Digital Link Dimming control DC5 Violet = "E1" Digital Link Dimming control Violet / White = "E2" Digital Link Dimming control Optional Dimming - Lutron 3-wire (DC3) Feed *Grey = (-) 0-10V Dimming control *Purple = (+) 0-10V Dimming control Driver Optional Dimming - Lutron Eco System (DCE) - Lutron 5-series (DC5) Feed Driver Green White Black Violet Violet / White Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions. Page 5 of 7 (Rev. 11/2015) KJU_Direct_v.2.3 Kju Square LED Direct Damp Location (DL) - Luminaires are suitable for use in damp location(s). Examples of such locations include protected areas under canopies, marquees, roofed porches, and similar locations where the fixture(s) are protected from direct contact with rain, snow, or excessive moisture (such as ocean spray). Interior locations include areas subject to moderate degrees of moisture, such as basements and certain barns and cold storage buildings. All solder points on LED boards are conformal coated. The phosphor layer of the LEDs is free of coating to avoid hazing. UL924 Compliance for Emergency Wiring (EC) - Luminaires with EC option compliant to UL 924 listed emergency luminaire. EC luminaires are intended to be wired to separate panels/breakers for emergency use. **If a different configuration is needed please consult the factory. Flex Whip - standard for RT mounting 90° Elbow on top of the housing (7/8" feed hole) 3/8" flexible metal conduit (6' long) 6" leads Straight fitting Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions. Page 6 of 7 (Rev. 11/2015) KJU_Direct_v.2.3 Kju Square LED Direct Photometry 1A70 / 20W LED / 4000K CCT 648 Link to photometry (IES & PDF files) 486 324 Catalog #: KJUS-1A70-40-LI-120 Report #: 1026873 Delievered Lumens: 2059 Input Watts: 20.13W Efficacy: 102 Power Factor: .992 Total Harmonic Distortion: 5.03% CCT: 4000K CRI: >86.3 Max Candela: 647.7 @ 2.5° from Vertical Spacing Criterion (0-180): 1.28 Spacing Criterion (90-270): 1.28 Spacing Criterion (Diagonal): 1.40 162 2 1 Maximum Candela = 647.7 Located At Horizontal Angle = 0, Vertical Angle = 2.5 # 1 - Vertical Plane Through Horizontal Angles (90 - 270) # 2 - Vertical Plane Through Horizontal Angles (0 - 180) CCT Multiplier Light Engine Multiplier 4000K 1.02 1A70 1.00 3500K 1.00 1A55 .786 3000K 1.05 1A40 .571 CCT and Light Engine multipliers apply to the photometry, and IES files. Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions. Page 7 of 7 (Rev. 11/2015) KJU_Direct_v.2.3