Kendo RL Recessed linear illumination system
Extruded aluminum recessed linear illumination system, Kendo RL is available in sections up to 76” long.
Specifically designed LED engine provides constant illumination levels from the beginning to the end of the
runs. The Kendo RL fixture is suitable for general illumination, architectural accents, under-cabinet, display cases,
ground recessed, and ceiling recessed (access above ceiling necessary). Available with 72” plenum rated lead
wires or quick-connect end feed. Class 2 listed for damp locations.
1.16”
0.88”
0.11”
0.22”
0.33”
mounting
material
TYPE IC
Finish options
Black
powder coated
Bronze
powder coated
White
powder coated
Silver
anodized
Technical information
Output Options
CCT INFO/LUMEN MULTIPLIER
HO
(LL36X2)
Output type
Lumens at 29K
clear lens
Color temperature
420 Lum/ft
TM-30-15
Multiplier
(referenced from 2900K)
CRI
Rf
Rg
2200K
0.74
82
81
99
2400K
0.85
98
95
101
2700K
0.81
98
95
102
Average power
consumption at 4’
6.5 W/ft
Maximum system
length
16’
2900K
1.00
97
95
102
Operating Voltage
24VDC
3000K
1.16
91
90
101
3500K
1.22
95
90
97
4100K
1.56
93
88
96
Ordering Code
MODEL
KRL
KRL - Kendo RL
REV7.2
LENGTH
12
12”- 76”
4” increments
CCT
22K
24K
27K
29K
30K
35K
41K
22K
- 2200K
- 2400K
- 2700K
- 2900K
- 3000K
- 3500K
- 4100K
OUTPUT
HO
HO - High
LENS
FINISH
C
C - Clear
HF - Half frosted
F - Frosted
SA
SA - Silver
BK - Black
BZ - Bronze
WH - White
(BK,BZ,WH
finishes will have
an upcharge and
require longer
lead times)
page 1 of 3
POWER FEED
F1
F1 - 72” wire leads
F2 - 72” wire leads at one end
and quick connect at other
F3 - Single quick connect
F4 - Dual quick connect
www.luminii.com
tel: 224-333-6033
Kendo RL Recessed linear illumination system
Photometry
KRL -48-29K-H-C-F-XX-XX
KRL -48-29K-H-F-F-XX-XX
719
-150
576
393
150
-150
432
-120
314
518
150
-120
-120
90
60
-60
90
0
0
-90
60
-60
UNIT: CD
30
120
104
0
-90
150
207
79
0
90
60
-60
UNIT: CD
C0/180
C90/270
UNIT: CD
C0/180
C90/270
30
-30
0
30
-30
0
Zone
Lumen
% Fixture
Zone
Lumen
% Fixture
Zone
Lumen
0-30
530
32%
0-30
305
26%
0-30
391
28%
0-40
838
50%
0-40
501
43%
0-40
629
46%
0-60
1379
82%
0-60
889
77%
0-60
1072
78%
0-90
0-180
1648
1680
98%
100%
0-90
0-180
1143
1162
98%
100%
0-90
0-180
1347
1376
98%
100%
Total
C0/180
C90/270
Zonal Lumen Summary 2900K
Zonal Lumen Summary 2900K
Zonal Lumen Summary 2900K
Total
414
311
120
157
144
-30
-150
236
120
288
-90
KRL -48-29K-H-HF-F-XX-XX
Total
% Fixture
Power consumption per fixture length
0.14”
Based on operation with PSD series of power supplies.
Actual
Length
W/ft
Total
wattage
12”
12-13/16”
6.80
6.80
16”
16-10/16”
6.80
8.90
20”
20-9/16”
6.80
11.50
24”
24-8/16”
6.75
13.50
28”
28-7/16”
6.75
15.80
32”
32-6/16”
6.75
17.90
36”
36-6/16”
6.65
19.95
40”
40-7/16”
6.65
22.00
44”
44-3/16”
6.65
24.00
48”
48-2/16”
6.55
26.20
52”
52-2/16”
6.55
28.00
56”
56-1/16”
6.55
30.00
60”
60”
6.40
32.00
64”
64-14/16”
6.40
34.00
68”
68-10/16”
6.40
35.50
72”
72-12/16”
6.30
37.80
76”
76-11/16”
6.30
39.90
actual length of assembled fixture
Nominal
Length
0.14”
to calculate cutout for recess
opening subtruct 0.28” from
actual fixture length
REV7.2
page 2 of 3
www.luminii.com
tel: 224-333-6033
Kendo RL Recessed linear illumination system
Power supply
See fixture and power supply instructions & spec sheet for wiring information. Dimming possible in select models - view Luminii website for list of compatible dimmers.
MODEL
POWER
PSV
PSV - PSV Series
OUTPUT
40
40 - 40 W
60 - 60 W
96 - 96 W
MODEL
DIMMING
24V
24 - 24 VDC
U2DIM
U2DIM - Dimming 0-10V
U2ND - Non Dimming
POWER
PSD
PSD - PSD Series
OUTPUT
48
48 - 48 W
96 - 96 W
288 - 288 W (3x 96W)
LOCATION
D
D - Dry Location
IP65 - Wet Location
INPUT
24
24 - 24 VDC
Blank - 120 V
240 - 240 V
277 - 277 V
MODEL
MODEL
LTEA4U1UKL-CV240
Lutron – Hi-lume™ 1% 2-wire
LED driver (120V forward phase only)
MODEL
L3DA4U1UKL-CV240
Hi-lume™ 1% EcoSystem Voltage
LED Driver
L3D0-96W24V-U
Hi-lume™ 0.1% EcoSystem Voltage
LED Driver with Soft-On, Fade-to-Black™
Connectors
Female quick
connect end
Male quick
connect end
Lead wires end
B
A
C
0.45”
Linking and extension cable options
Powerfeed options
72.00”
-F1
12” extension cable
Part # LMC
D
0.38”
0.45”
Male quick-connect
Female/male
adapter
Part # EC-12
13.50”
C
12.00”
B
A
Male quick-connect long
A
48” extension cable
Part # LMC-70
71.00”
3.00”
-F2
D
Part # EC-48
72.00”
C
A
48.00”
B
A
Y-splitter
3.00”
-F3
A
A
120” extension cable
Part # LYC
Part # EC-120
12.57”
6.73”
B
A
B
A
3.00”
-F4
120.00”
D
A
Female/male adaptor
D
3.00”
A
A
D
-F3 and -F4 powerfeed options require #LMC to connect to PSD series of
Part # FMA
power supplies.
D
Sample layout of powerfeed connections
24 VDC
power
supply LMC
EC
F4
F3
EC
LYC
F3
F2
F3
Maximum System Length
REV7.2
page 3 of 3
www.luminii.com
tel: 224-333-6033