LHBV
LED High Bay Vapor
Premium-Grade Wide Beam Molded Enclosed and Gasketed Glass Reinforced Polyester Housing Luminaire (IP67)
Application Features
Project
Specification-grade high or low bay IP67 LED luminaire. For use
with indoor and outdoor applications where high-efficiency,
high-performance and dust/water resistance is required. This
luminaire's glass reinforced polyester housing and acrylic lens
makes it ideal for applications that require a high degree of
ingress protection. Operating ambient temperature range is from
-40 to 40 degree celcius.
Cat #
Specifications
Features
Optical System
• IP65/67 - Ingress Protection Rating
• Meets Canada Food Inspection Agency
standards
• NSF and NEMA 4X Certified
• Replaces 250 or 400 watt HID fixtures
• Up to 50% energy savings compared to
equivalent metal halide luminaire
Lens is optically clear, impact resistant acrylic for maximum light transmission and
longevity or optional UV stabilized polycarbonate lenses for maximum impact
resistance. The sides have precise linear prisms and ends are frosted to reduce
direct glare.
Mounting
Stainless steel V-hook with hook hangers are standard. Optional cable hangers
and ceiling-mount brackets are available.
Construction
Molded one-piece glass reinforced plastic housing. Continuous poured in place
polyurethane gasket. Diffuser flange fits into the gasketed retention slot providing
a continuous seal, and is held in place with 12 stainless steel retaining latches.
Holes on each end are 7/8 inch nominal diameter and are provided with two EPDM
rubber caps for connection and through wiring.
Finish
Pre-painted steel geartrays.
• 80+ CRI
• Standard low voltage dimming (0-10V)
Options & Adders
•
•
•
•
Emergency battery pack
Motion Sensors
Ceiling-mount bracket
Clear, textured polycarbonate lens with
linear ribs
Applications
Electrical
All electrical components are CSA approved or UL listed. Long life LEDs coupled
with high efficiency drivers provide quality illumination. Rated to deliver L80
performance > 50,000 hours. System efficacy of at least 100 lumens per watt for
standard units.
Approvals
Approved to CSA and UL standards.
Tested to LM79 standards.
Suitable for wet locations.
IP65/67
DesignLights Consortium® Qualified.
•
•
•
•
•
•
Cleanrooms
Cold Storage Facilities
Food Processing Areas
Ships and Marine Vessels
Dust, Wet and Damp Environments
Swimming Pools
All configurations may not be DLC qualified.
Check www.designlights.org/QPL for qualified configurations.
Dimensions
V HOOK WITH
HOOK HANGERS (STANDARD)
13/16” HOLE FOR
STRAIN RELIEF
51 7/16”
14 5/8”
5 7/8”
Side View
14 5/8”
Back View
Visioneering 35 Oak St. Toronto, ON M9N 1A1 Phone: (416)245-7991 Fax: (416)245-4778 | www.viscor.com | Visioneering is a Viscor Inc. brand
Page 5
LED
Date
HIGHBAY LIGHTING
Type
Type
LHBV
LED High Bay Vapor
Date
Premium-Grade Wide Beam Molded Enclosed and Gasketed
Glass Reinforced Polyester Housing Luminaire (IP67)
Project
Cat #
Photometrics - Please consult www.viscor.com for photometric results.
Delivered Lumens
Delivered Lumens
Lumen Package
(Ambient Min/Max)
4000K 80CRI ¹
Total Watts
5000K 80CRI ¹
120L (-40°C/55°C)
180L (-40°C/50°C)
240L (-40°C/45°C)
11148
16535
21517
120
116
116
11459
16846
21969
123
118
118
11512
17075
22220
124
120
120
11833
17396
22687
127
122
122
93
142
186
347V
93
142
186
480V
100
153
200
120HL (-35°C/55°C)
180HL (-35°C/50°C)
240HL (-35°C/40°C)
12744
17359
25057
119
120
115
13019
17737
25659
121
123
118
13160
17926
25876
123
124
119
13444
18316
26497
125
127
122
108
145
217
116
155
232
116
155
232
Frosted Lens lm/W Clear Lens lm/W Frosted Lens
lm/W Clear Lens lm/W 120/277V
¹ Lumens /watt and wattage bas ed on 25°C
Ordering
LHB
-
V
LED
Type
Series
V
Voltage
8 - (80-89)
Length
(in.)
HIGHBAY LIGHTING
Driver Options
CRI
Size
Nominal
48
Options
UNV - 120-277V
347 - 347V
UN4 - 347-480V
CCT
35K - 3500 K
40K - 4000 K
50K - 5000 K
(See Option Code Section For More Information)
B39
Emergency Lighting Battery Pack
Housing Construction Options
C18
Tamperproof Latches
Lens Options
Example:
LHBV48-LED840K180LUNV-P07
Other options may be available consult factory.
Specifications and data subject to change without notice.
Mounting Accessories (Ordered Separately)
KIT00001
KIT00006
KIT00013
KIT00014
KIT00040
KIT00042
KIT00060
CHAIN SET (2) 4FT W/ S-HOOKS.M10
RIGID MOUNTING BEAM.M63
CEILING PLATE W/ WIREFORM.M39
25 DEGREE BRACKET.M43(25)
CHAIN SET (2) 6FT.M10 W/ S-HOOKS (4)
CHAIN SET (2) 12FT.M10 W/ S-HOOKS(4)
45 DEGREE BRACKET.M43(45)
Occupancy Sensors (Ordered Separately)
KIT00065 IP65 MOTION SENSOR KIT (UNV)
KIT00066 IP65 MOTION SENSOR KIT (UN4)
Nominal
Lumens
*
120L - 12000
180L - 18000
240L - 24000
120HL - 12000*
180HL - 18000*
240HL - 24000*
*High Lumen
(High impact acrylic is standard- P05)
P07
P67
Clear Polycarbonate Lens
High Impact Acrylic Frosted Smooth Molded
Packaging Options
Bulk Pack/ Pallet Packed and/or Wrapped
K0
Wiring Options
† V08
V10 (1)
V10 (2)
V15
V21
V82(UNV)
V82(UN4)
Flexible Feed Cord (single circuit only) 6-ft Standard
Hub Compact for 1/2" Threaded Pipe (3/4" OD) - 1 End
Hub Compact for 1/2" Threaded Pipe (3/4" OD) - 2 End
Liquid Tight Strain Relief
Motion Sensor with Enclosure Assembly
(For Damp Locations)
IP65 Motion Sensor 120-277V (For Wet Locations)
IP65 Motion Sensor 347-480V (For Wet Locations)
† For pendant mounted applications only.
Not for use in surface mount applications.
Accessories - Mounting
Standard V-Hook
with Wireform
KIT00013 - Mounting
Ceiling Plate with
Wireform - M39
KIT00001- Mounting
Chain Set - M10(xx)
KIT00006 - Rigid
Mounting Beam for
Pendant or Surface - M63
Visioneering 35 Oak St. Toronto, ON M9N 1A1 Phone: (416)245-7991 Fax: (416)245-4778 | www.viscor.com | Visioneering is a Viscor Inc. brand
201506A
Page 6